Texas Instruments

INA132U/2K5 - 2.5 Gain Differential Amplifier | Texas Instruments

MPN: INA132U/2K5 ✓ نشط
2.7 V to 36 V Vdss 8-pin SOIC Package
الحد الأدنى للطلب: 1 |

INA132U/2K5 نظرة عامة

The Texas Instruments INA132U/2K5 is a low-power, single-supply differential amplifier with a fixed gain of 2.5, a 2.7 V to 36 V operating range, and an 8-pin SOIC package. The device combines a precision operational amplifier with an integrated, laser-trimmed resistor network to measure small voltage differences accurately while rejecting large common-mode signals.

A difference amplifier is an analog signal-conditioning circuit that subtracts one input voltage from another and amplifies the result. The INA132U/2K5 belongs to the instrumentation-amplifier and precision-differential-amplifier hierarchy, where accurate gain and common-mode rejection are essential for converting small sensor outputs into signals suitable for analog-to-digital converters, control systems, and measurement equipment.

The integrated resistor network gives the /2K5 ordering option a fixed gain of 2.5, while laser trimming supports accurate gain and high common-mode rejection. The amplifier operates from a single 2.7 V to 36 V supply and can also be used with split supplies where the input and output voltages remain within the device's electrical limits. Its low-power design makes it suitable for battery-powered and industrial instrumentation systems.

The INA132U/2K5 accepts input signals through differential IN+ and IN− terminals and provides the amplified difference at OUT. A reference terminal permits the output to be shifted relative to a chosen voltage when the application cannot use a ground-centered signal. The internal architecture simplifies PCB design by reducing the number of external precision resistors normally required for a discrete difference amplifier.

Typical uses include bridge-transducer excitation and readout, precision current sensing, industrial process monitoring, battery-powered sensing, and low-level differential signal acquisition. Because the device has a fixed 2.5 gain, engineers should verify that the required signal gain, common-mode range, output swing, and supply voltage match before placing it in a new design.

Layout quality directly affects differential-signal performance. Route the IN+ and IN− paths as a closely matched pair, keep the reference and output nodes away from switching-current paths, and use a low-noise supply arrangement with local bypass capacitors. Confirm input and output common-mode limits at the operating temperature and check the final gain tolerance against the system measurement budget.

This page combines ordering information, technical limits, drop-in replacement analysis, comparison data, and application-specific design guidance. It is intended to help engineers identify whether the INA132U/2K5 provides the required gain, supply range, package, and replacement compatibility before committing a board layout.

بدائل مباشرة لـ INA132U/2K5 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع INA132U/2K5 (نفس عامل الشكل والبصمة) — يختلف في Device Type, Operating Temperature Range.

Texas Instruments
Device Type: High-speed precision difference amplifier
Operating Temperature Range: -40 C to +85 C

INA132UA/2K5

✅ بديل مباشر
📦 8-pin SOIC
Same INA132 family and 2.5 gain; ordering code differs by delivery format, with no identified electrical performance difference.

📋 بديل مرجعي (غير موجود في الكتالوج)

INA132U/2K5 الحدود القصوى والخصائص الكهربائية

Device Type Single-supply difference amplifier
Number of Circuits 1 circuit
Fixed Gain 2.5 V/V
Supply Voltage Range 2.7 V to 36 V
Typical Total Supply Voltage ±15 V
Minimum Total Supply Voltage ±1.35 V
Maximum Total Supply Voltage ±18 V
نطاق درجة حرارة التشغيل -40 °C to +85 °C
العلبة 8-pin SOIC
نوع التركيب Surface mount

دليل تكوين أطراف INA132U/2K5 8-pin soic

تكوين الأطراف لـ INA132U/2K5 (حزمة 8-pin soic). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 8-pin soic لـ INA132U/2K5

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ INA132U/2K5.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

INA132U/2K5 مناسب لـ 6 التطبيقs: Bridge Transducer Signal Conditioning, Precision Shunt Current Sensing, Battery-Powered Sensor Interface, Industrial Process Monitoring, Low-Level Differential Signal Acquisition, Instrumentation Signal Conditioning.

🏭

Bridge Transducer Signal Conditioning

The INA132U/2K5 is well suited to bridge-transducer readout because its integrated resistor network provides a fixed gain of 2.5 and rejects common-mode voltage present on both bridge inputs. Connect the bridge excitation across the device supply arrangement and route IN+ and IN− as a matched pair to minimize added differential error. The 2.7 V to 36 V supply range supports low-voltage excitation as well as industrial systems. Before deployment, verify the bridge output at zero and full scale, check the output against the available supply headroom, and account for the amplifier's gain error in the measurement budget.

⚡

Precision Shunt Current Sensing

The INA132U/2K5 can amplify the small differential voltage generated by a current shunt while rejecting the larger common-mode voltage on the shunt nodes. Its 2.5 V/V fixed gain increases the measurement signal without requiring an external gain network. Use Kelvin routing from the shunt to IN+ and IN− so copper and connector resistance do not appear as sensed voltage. The single-supply operation supports compact battery-powered monitoring, but the system must preserve output headroom and remain within the input common-mode range during startup and fault conditions.

📱

Battery-Powered Sensor Interface

The INA132U/2K5 fits low-power sensor interfaces because it operates from a single supply beginning at 2.7 V and integrates the precision gain-setting network. It can amplify a differential sensor output while operating from a compact 3.3 V rail, reducing the need for external resistors and associated board area. Power-system designers should still calculate operating current from the manufacturer specifications and verify shutdown behavior separately because the INA132 is intended for continuous low-power signal conditioning rather than duty-cycled operation.

🏭

Industrial Process Monitoring

Industrial process monitoring benefits from the INA132U/2K5's fixed 2.5 gain and integrated precision resistor network because sensor outputs can be conditioned close to the measurement source. The 2.7 V to 36 V supply range allows use in both compact instrumentation and higher-voltage industrial systems when the rails are otherwise suitable. Place the amplifier near the sensor connector, maintain symmetrical differential routing, and isolate it from motor-control and relay-switching nodes. Verify the process input range, sensor excitation requirements, and required analog-to-digital converter full-scale voltage before finalizing the signal chain.

🖥️

Low-Level Differential Signal Acquisition

The INA132U/2K5 is useful when a small differential signal must be elevated before conversion or comparison, particularly when the source contains a much larger common-mode component. Its fixed 2.5 gain preserves a compact implementation while the internal precision network improves consistency between devices. Use short, matched traces and a stable reference arrangement to minimize offset and common-mode conversion. Confirm that the amplified signal remains inside the output swing, and account for the 2.5 multiplication when choosing downstream analog-to-digital converter ranges.

🔧

Instrumentation Signal Conditioning

The INA132U/2K5 provides a practical first stage for instrumentation signals that require differential sensing and fixed amplification. Its 8-pin SOIC package supports conventional surface-mount assembly, and the integrated gain network reduces component count compared with a discrete precision difference amplifier. Designers should assess offset, gain tolerance, common-mode rejection, and output range for each measurement class using the manufacturer limits. For high-gain or highly variable systems, a programmable or higher-gain instrumentation amplifier may offer more adjustment flexibility than this fixed 2.5-gain device.

What is the gain of the INA132U/2K5?
The INA132U/2K5 has a fixed differential gain of 2.5 V/V. Its integrated resistor network and precision operational amplifier convert the difference between the IN+ and IN− voltages into an amplified output at OUT. According to the Texas Instruments INA132 manufacturer datasheet, the /2K5 nomenclature identifies the 2.5-gain configuration, allowing it to amplify small differential sensor signals without external gain-setting resistors.
What is the operating voltage range of INA132U/2K5?
The INA132U/2K5 operates from 2.7 V to 36 V across its complete supply range. The manufacturer also identifies ±1.35 V as the minimum total supply and ±18 V as the maximum total supply for split-supply operation. These limits describe the device's power rails; input and output common-mode voltages must remain inside their own specified ranges for linear operation.
Where can I download the INA132U/2K5 datasheet PDF?
The official INA132U/2K5 datasheet PDF is available from the Texas Instruments INA132 document link at https://www.ti.com/lit/ds/symlink/ina132.pdf. The document contains the device nomenclature, electrical characteristics, application information, and package details for the INA132 family. Texas Instruments also maintains a product page at https://www.ti.com/product/INA132 for ordering and lifecycle information.
Where can I find the INA132U/2K5 pinout?
The INA132U/2K5 pin assignments are shown in the pin-configuration section of the Texas Instruments INA132 manufacturer datasheet. The component uses an 8-pin SOIC package, and its differential signal path includes IN+, IN−, and OUT connections together with supply, ground, and reference terminals. Use the datasheet's pin-configuration diagram when assigning PCB nets and checking exposed package details.
Is INA132U/2K5 suitable for bridge and sensor measurements?
Yes, the INA132U/2K5 is suitable for bridge and differential-sensor measurements because it provides a fixed 2.5 gain, high common-mode rejection, and integrated precision resistors. It is particularly useful when a sensor output is small relative to its common-mode voltage. Confirm that excitation level, sensor impedance, input bias current, and the amplifier's output swing remain acceptable under the worst-case operating conditions.
Can INA132U/2K5 operate from a single 3.3 V supply?
Yes, a 3.3 V supply is within the INA132U/2K5's stated 2.7 V to 36 V operating range. The device is designed for low-power, single-supply operation, which makes it suitable for battery-powered instrumentation. The available output swing and input common-mode window are narrower than the supply itself, so verify both signal limits and the output offset required by the application.
What is the difference between INA132U/2K5 and INA132UA/2K5?
The INA132U/2K5 and INA132UA/2K5 are presented as functionally equivalent INA132 configurations in the 2.5-gain family and use the same 8-pin SOIC footprint. The distinguishing ordering information is the package shipping format associated with the U and UA designations. A replacement should therefore be checked against the required reel, tube, or other delivery method as well as its electrical specifications.
What is the best drop-in replacement for INA132U/2K5?
INA132UA/2K5 is the closest verified same-brand drop-in candidate because it retains the INA132 family, 2.5 gain configuration, and 8-pin SOIC package. INA132U and INA132U/2K5G4 are also listed as related INA132 variants, but their ordering and packaging characteristics differ. INA143UA and AD8278ARZ may serve broader differential-amplification roles, yet their gain behavior must be reviewed before treating either as a direct replacement.
Can INA143UA replace INA132U/2K5?
INA143UA is not a confirmed drop-in replacement for the INA132U/2K5 because its gain configuration differs even though it is identified as an 8-pin differential amplifier. Replacing the device without changing external gain-setting components would change the signal scaling and may violate the board's common-mode, output-swing, or supply requirements. Use it only after comparing its complete electrical specification and recalculating the system gain.
What can replace INA132U/2K5?
INA132UA/2K5 is the closest direct replacement identified for the INA132U/2K5 because it preserves the device family, 2.5 gain, and 8-pin SOIC package. INA132U and INA132U/2K5G4 are related ordering variants that require attention to package shipping format. A different amplifier family may provide a functional alternative, but it should not be treated as drop-in unless its gain, pinout, supply range, and common-mode behavior are verified.
When should I choose INA132U/2K5 over INA132U?
Choose INA132U/2K5 when the system requires a fixed 2.5 signal gain, while INA132U provides the base INA132 configuration. Both are associated with the same low-power, single-supply differential-amplifier family and 8-pin SOIC footprint, but changing the gain variant directly scales the output and affects headroom. Select the version whose gain matches the sensor output and downstream converter input range.
Is INA132U/2K5 suitable for current sensing?
Yes, INA132U/2K5 is suitable for low-level current sensing when the shunt differential voltage remains within the amplifier's input and output limits. The fixed 2.5 gain magnifies the shunt voltage, while the integrated resistor network supports accurate differential measurement. Kelvin-connection the shunt, minimize trace resistance differences, and verify common-mode limits during high-current transients.
How should I design the PCB layout for INA132U/2K5?
Route IN+ and IN− together as a compact, symmetric differential pair, connect the amplifier to the source with minimal trace resistance, and keep the OUT and reference routing away from high-current switching paths. Place the supply bypass capacitor close to the supply and ground pins, and provide a solid ground return. Symmetrical routing minimizes conversion of common-mode current into differential error.
Where can I buy INA132U/2K5 and check its lead time?
Use the Request a Quote form on this page to ask about INA132U/2K5 availability, current lead time, minimum order quantity, and delivery format. Texas Instruments identifies the INA132U/2K5 ordering option as active, but production schedules and order quantities can vary. Request the exact MPN and required shipping format so the quotation and schedule reflect the intended order.
What are the key specifications engineers should know about INA132U/2K5?
The key INA132U/2K5 specifications are a fixed gain of 2.5, a 2.7 V to 36 V supply range, one amplifier circuit, an 8-pin SOIC package, and an operating temperature range of -40 °C to +85 °C. The Texas Instruments INA132 manufacturer datasheet also defines the device as a low-power, single-supply difference amplifier with an integrated precision resistor network.
What is the best Analog Devices equivalent for INA132U/2K5?
AD8278ARZ is the cross-brand candidate identified for INA132U/2K5, and both are described as single-circuit, 8-pin differential amplifiers. It should not be treated as an automatic drop-in replacement because its complete pin assignment and gain architecture must be matched to the INA132 implementation. Compare supply range, gain error, common-mode rejection, input bias current, output swing, and package dimensions before substitution.

بيانات مرجعية هندسية لـ INA132U/2K5 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose INA132U/2K5 when a measurement requires a low-power, single-supply differential amplifier with a fixed gain of 2.5 and an 8-pin SOIC footprint. It is especially appropriate for bridge sensors and low-level shunt signals whose differential output is small compared with the common-mode voltage. Choose INA132UA/2K5 when the electrical configuration is unchanged but a different ordering or delivery format is preferable. Do not substitute INA132U merely for footprint compatibility if the base device has a different gain configuration. Consider INA143UA or AD8278ARZ only after checking their gain equations and electrical limits; both are 8-pin differential-amplifier candidates, but the available cross-reference information does not establish either as a fully compatible replacement for the INA132U/2K5. For systems requiring adjustable gain, higher precision limits, or input and output common-mode behavior outside the INA132 specification, evaluate a dedicated instrumentation amplifier instead.

المقارنة مع البدائل

المعامل هذا المنتج INA132UA/2K5
Brand Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC
Device Type Low-power, single-supply difference amplifier Low-power, single-supply difference amplifier
Fixed Gain 2.5 V/V 2.5 V/V
Number of Circuits 1 circuit 1 circuit
Supply Voltage Range 2.7 V to 36 V 2.7 V to 36 V
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C
Mounting Type Surface mount Surface mount
Integrated Precision Resistor Network Yes Yes
Ordering Difference INA132U/2K5 ordering code INA132UA/2K5 ordering code; delivery format differs

أبرز الفروقات

  • Fixed 2.5 gain with integrated precision resistor network (مقابلINA132UA/2K5)
  • Single-supply operation across a wide voltage range (مقابلINA132UA/2K5)
  • Surface-mount instrumentation footprint (مقابلINA132UA/2K5)

ملاحظات التصميم

Route IN+ and IN− as a closely matched differential pair and connect both amplifier inputs to the sensor or shunt with equal trace lengths and symmetric geometry. Current flowing through mismatched input resistance creates differential error even when the amplifier's common-mode rejection is high. Place the device near the source, minimize loop area, and keep switching-node copper and high-current return paths away from the differential inputs.

Place the supply bypass capacitor immediately adjacent to the amplifier's supply and ground pins, using the shortest electrical path available. Keep the supply return above or adjacent to the sensitive input traces rather than sharing a noisy return segment with relays, motors, or LEDs. Validate the input common-mode and output-swing limits with the actual 2.7 V to 36 V operating rail because the usable signal range is narrower than the supply range.

Do not select a different INA132 gain version solely because it uses the same 8-pin SOIC outline. The base INA132 and INA132UA/2K5 family ordering options can have different gain behavior, while INA143UA and AD8278ARZ may use different gain architectures. A physical footprint match does not guarantee signal-level compatibility; confirm the gain equation, common-mode range, output swing, supply limits, and reference-pin use before substitution.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer identifies the INA132U/2K5 as active, but specific environmental and material-compliance statements require confirmation from the current manufacturer documentation or declaration.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

INA132U/2K5 datasheet INA132U/2K5 pinout INA132U/2K5 datasheet pdf INA132U/2K5 equivalent INA132U/2K5 replacement INA132U/2K5 cross reference INA132U/2K5 price INA132U/2K5 stock Texas Instruments INA132U/2K5 INA132U/2K5 8-SOIC INA132U/2K5 current sensing INA132U/2K5 vs INA132UA/2K5

المكونات والمصطلحات ذات الصلة

Texas Instruments INA132U/2K5 INA132UA/2K5 INA132U INA132U/2K5G4 INA143UA AD8278ARZ difference amplifier instrumentation amplifier precision signal-conditioning IC operational amplifier common-mode rejection differential input fixed gain integrated resistor network single-supply operation 8-pin SOIC SOIC package family surface-mount package bridge transducer shunt current sensing industrial process monitoring RoHS REACH
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر