KSZ8091MNXCA - 10/100 Ethernet PHY | Microchip Technology
MPN: KSZ8091MNXCA ✓ نشطKSZ8091MNXCA نظرة عامة
An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data into signals suitable for copper-cable communication and reconstructs incoming signals into a digital interface for the host controller. Within the network hardware hierarchy, the KSZ8091 is an Ethernet interface IC that sits between a MAC-based controller and a 10/100 Ethernet cable. It reduces external circuitry while providing standardized network connectivity.
The KSZ8091 supports 10 Mb/s and 100 Mb/s operation, Full MII, and RMII. Its single-supply architecture operates from 1.2 V, reducing the number of supply rails required around the PHY. Integrated functions include Wake-on-LAN support and LinkMD cable diagnostics, which help a system identify common copper-cable faults. The device uses a 32-QFN package with an exposed thermal pad for compact surface-mount layouts.
The KSZ8091 is a highly integrated 10Base-T/100Base-TX solution intended to reduce board cost and simplify the physical layer of compact Ethernet equipment. Full MII provides a parallel data-and-control interface, while RMII reduces the number of signals required between the PHY and a compatible Ethernet controller. Both interfaces are offered by the MNXCA configuration, allowing the same PHY family to support different controller architectures.
Typical uses include industrial Ethernet controllers, network appliances, embedded systems, IP cameras, access-control equipment, and factory automation modules. The combination of 10/100-Mb/s support, 1.2 V operation, WoL, and cable diagnostics is useful for equipment that must connect over existing CAT-5 infrastructure without requiring gigabit Ethernet magnetics.
PCB design should preserve the layout and component arrangement specified by the manufacturer because a high-speed Ethernet PHY depends on controlled impedance, short return paths, and careful separation between analog and digital circuitry. Confirm RMII timing, reference-clock requirements, magnetics selection, and thermal-pad assembly details before releasing the PCB.
This page organizes the verified device specifications, interface choices, sourcing information, candidate drop-in alternatives, and practical Ethernet design considerations into one engineering-focused reference. It also identifies where device-specific pin, timing, and layout details must be confirmed in the manufacturer datasheet before implementation.
بدائل مباشرة لـ KSZ8091MNXCA — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع KSZ8091MNXCA (نفس عامل الشكل والبصمة) — يختلف في Cable Type, Number of Transceivers.
KSZ8081MNXCA
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←KSZ8081RNACA
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←KSZ8091MLX
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
KSZ8091RNB
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
KSZ8091MNXCA المواصفات
| Device Type | 10/100 Ethernet physical-layer transceiver |
| Supported Data Rates | 10 Mb/s and 100 Mb/s |
| Ethernet Standards | 10Base-T and 100Base-TX |
| Cable Type | CAT-5 unshielded twisted-pair cable |
| Host Interface | Full MII and RMII |
| Number of Transceivers | 1 transceiver |
| جهد التغذية التشغيلي | 1.2 V |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +85 °C |
| Package Type | 32-QFN (5 x 5 x 0.9 mm) |
| نمط التركيب | SMD/SMT |
| Exposed Pad | Present |
| Wake-on-LAN Support | Supported |
| LinkMD Cable Diagnostics | Supported |
| حالة RoHS | Compliant |
| Supply Configuration | Single supply |
| Ethernet Media | 10Base-T/100Base-TX copper |
| Interface Compatibility | Full MII and RMII |
دليل تكوين أطراف KSZ8091MNXCA 32-qfn (5 x 5 x 0.9 mm)
تكوين الأطراف لـ KSZ8091MNXCA (حزمة 32-qfn (5 x 5 x 0.9 mm)). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ KSZ8091MNXCA.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
KSZ8091MNXCA مناسب لـ 6 التطبيقs: Industrial Ethernet Controller, Embedded Network Appliance, IP Camera and Security Equipment, Factory Automation Module, Network Access and Communication Equipment, Test and Measurement Instrument.
Industrial Ethernet Controller
The KSZ8091MNXCA fits industrial controller boards that communicate over CAT-5 UTP at 10 Mb/s or 100 Mb/s. Its 1.2 V single-supply operation simplifies the PHY power domain, while Full MII and RMII allow selection according to the host controller architecture. The -40 °C to +85 °C operating range supports industrial environments. Use the device between the Ethernet controller and network magnetics, following the manufacturer reference layout to control differential-pair impedance and exposed-pad heat dissipation.
موصى به
Embedded Network Appliance
The KSZ8091MNXCA provides a compact 10/100 Ethernet endpoint for embedded Linux, real-time control, and industrial gateway products. Supporting both Full MII and RMII lets the same PHY family serve processors with different host-side bus architectures. At 10 Mb/s and 100 Mb/s, it supports legacy CAT-5 infrastructure without a gigabit PHY. LinkMD diagnostics can help identify cable faults, while Wake-on-LAN supports remote power-management workflows.
موصى به
IP Camera and Security Equipment
The KSZ8091MNXCA suits compact IP cameras and security endpoints that require reliable 10/100-Mb/s Ethernet connectivity alongside a dedicated video processor. Its small 32-QFN 5 x 5 mm package supports space-constrained board layouts, and the 1.2 V operating supply can simplify power sequencing around the Ethernet PHY. LinkMD diagnostics are useful for installation troubleshooting, while Wake-on-LAN can support remote maintenance and restart functions in deployed systems.
موصى به
Factory Automation Module
The KSZ8091MNXCA can connect factory automation modules to 10/100-Mb/s Ethernet backbones where legacy copper infrastructure is already installed. Its -40 °C to +85 °C range addresses wide industrial temperature conditions, and LinkMD cable diagnostics help maintenance personnel distinguish wiring problems from equipment failures. The device operates from a single 1.2 V supply and supports Full MII or RMII connectivity to an embedded controller, reducing external PHY component count.
موصى به
Network Access and Communication Equipment
The KSZ8091MNXCA is appropriate for access terminals, serial-to-Ethernet gateways, and compact communication modules that require a standardized 10Base-T/100Base-TX physical layer. Its Full MII interface can connect to a higher-throughput parallel controller, while RMII reduces host-side wiring in space-constrained implementations. The device supports Wake-on-LAN for remote activation and LinkMD diagnostics for cable fault detection, helping simplify both operation and maintenance.
موصى به
Test and Measurement Instrument
The KSZ8091MNXCA can provide a standard 10/100-Mb/s Ethernet management connection in test, measurement, and diagnostic instruments. Its single 1.2 V supply and 32-QFN footprint support compact controller boards, while Full MII and RMII offer flexibility for different processor interfaces. LinkMD diagnostics assist with installed-cable troubleshooting. The 5 x 5 mm exposed-pad package requires careful thermal-pad assembly and layout according to the manufacturer guidance.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ KSZ8091MNXCA — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | KSZ8081MNXCA | KSZ8081RNACA | KSZ8091MLX | KSZ8091RNB |
|---|---|---|---|---|---|
| Package | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Data Rate | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s |
أبرز الفروقات
- Supports both parallel Full MII and reduced-pin RMII interfaces (مقابلKSZ8091MLX)
- RMII configuration includes reference-clock output (مقابلKSZ8091RNB)
- Single 1.2 V operating supply (مقابلKSZ8081MNXCA)
- Integrated cable diagnostics and remote activation support (مقابلKSZ8081RNACA)
ملاحظات التصميم
Use the manufacturer KSZ8091 reference layout and pin-description table for all 32-QFN connections. Keep the 100BASE-TX differential pairs short, continuous, impedance controlled, and isolated from digital clocks and switching supplies. Route the exposed-pad connection and thermal vias according to the package and assembly recommendations because this 5 x 5 mm device requires deliberate heat spreading.
Design the 1.2 V PHY rail with low-noise local decoupling and verify startup behavior across the full 1.2 V operating condition. The 32-QFN exposed pad must be connected according to the manufacturer layout and assembly instructions. Because Ethernet magnetics and the host controller can generate substantial transient current, isolate noisy supply paths and confirm voltage tolerance at the PHY pins under load.
Treat the RMII or MII interface as a timing-critical synchronous interface. Match trace lengths where required by the host-controller specification, provide a clean reference clock, and avoid routing these signals through noisy power-converter regions. Validate rise time, timing margin, and reference-clock jitter with the intended controller rather than relying on nominal Ethernet data rate alone.
Do not substitute an Ethernet PHY solely because it uses a 32-QFN package. Before replacing the KSZ8091MNXCA, compare every pin function, MII/RMII timing, reference-clock source, register address, interrupt behavior, cable-diagnostic feature, Wake-on-LAN implementation, magnetics recommendation, and exposed-pad connection. Software drivers may also depend on the original PHY's register map.
معلومات الامتثال
RoHS compliance is stated in the product listing. No additional compliance claims are made without an explicit product-level statement.