Microchip Technology

KSZ8091MNXCA - 10/100 Ethernet PHY | Microchip Technology

MPN: KSZ8091MNXCA ✓ فعال
1.2 V Vdss 10Base-T and 100Base-TX Rds(on) 32-QFN (5 x 5 x 0.9 mm) Package
حداقل سفارش: 1 |

KSZ8091MNXCA نمای کلی

Microchip Technology KSZ8091MNXCA is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver supporting Full MII and RMII interfaces in a 32-QFN package measuring 5 x 5 mm. It operates from a 1.2 V supply, supports data rates of 10 Mb/s and 100 Mb/s, and is designed for transmission and reception over standard CAT-5 unshielded twisted-pair cable.

An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data into signals suitable for copper-cable communication and reconstructs incoming signals into a digital interface for the host controller. Within the network hardware hierarchy, the KSZ8091 is an Ethernet interface IC that sits between a MAC-based controller and a 10/100 Ethernet cable. It reduces external circuitry while providing standardized network connectivity.

The KSZ8091 supports 10 Mb/s and 100 Mb/s operation, Full MII, and RMII. Its single-supply architecture operates from 1.2 V, reducing the number of supply rails required around the PHY. Integrated functions include Wake-on-LAN support and LinkMD cable diagnostics, which help a system identify common copper-cable faults. The device uses a 32-QFN package with an exposed thermal pad for compact surface-mount layouts.

The KSZ8091 is a highly integrated 10Base-T/100Base-TX solution intended to reduce board cost and simplify the physical layer of compact Ethernet equipment. Full MII provides a parallel data-and-control interface, while RMII reduces the number of signals required between the PHY and a compatible Ethernet controller. Both interfaces are offered by the MNXCA configuration, allowing the same PHY family to support different controller architectures.

Typical uses include industrial Ethernet controllers, network appliances, embedded systems, IP cameras, access-control equipment, and factory automation modules. The combination of 10/100-Mb/s support, 1.2 V operation, WoL, and cable diagnostics is useful for equipment that must connect over existing CAT-5 infrastructure without requiring gigabit Ethernet magnetics.

PCB design should preserve the layout and component arrangement specified by the manufacturer because a high-speed Ethernet PHY depends on controlled impedance, short return paths, and careful separation between analog and digital circuitry. Confirm RMII timing, reference-clock requirements, magnetics selection, and thermal-pad assembly details before releasing the PCB.

This page organizes the verified device specifications, interface choices, sourcing information, candidate drop-in alternatives, and practical Ethernet design considerations into one engineering-focused reference. It also identifies where device-specific pin, timing, and layout details must be confirmed in the manufacturer datasheet before implementation.

جایگزین‌های drop-in برای KSZ8091MNXCA — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای KSZ8091MNXCA (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Cable Type, Number of Transceivers.

Microchip Technology
Cable Type: CAT-3 / CAT-5 / CAT-5e UTP
Number of Transceivers: 1/1 (Full Duplex RMII)
مقایسه با KSZ8091MNXCA →

KSZ8081MNXCA

✅ جایگزین مستقیم
Microchip Technology
📦 32-QFN (5 x 5 mm)
10BASE-T/100BASE-TX Ethernet physical-layer transceiver · Microchip Technology · 10 Mbit/s and 100 Mbit/s · 1 channel · Full MII · 3.3 V · Single supply · CAT-5 unshielded twisted pair

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

KSZ8081RNACA

✅ جایگزین مستقیم
Microchip Technology
📦 32-QFN (5 x 5 mm)
10/100BASE-TX Ethernet PHY Transceiver · RMII v1.2 (Reduced Media Independent Interface) · 3.135 V to 3.465 V (3.3 V typical) · 1.2 V (generated by internal LDO) · 10 Mbps / 100 Mbps (auto-negotiation) · 1/1 (Full Duplex RMII) · CAT-3 / CAT-5 / CAT-5e UTP · Up to 140 m (CAT-5)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

KSZ8091MLX

✅ جایگزین مستقیم
📦 32-QFN (5 x 5 mm)
Same KSZ8091 10/100 Mb/s PHY family and 32-QFN format, but the MLX version is described as an MII-interface configuration rather than the MNXCA Full MII/RMII combination.

📋 جایگزین مرجع (خارج از کاتالوگ)

KSZ8091RNB

✅ جایگزین مستقیم
📦 32-QFN (5 x 5 mm)
Same KSZ8091 10/100 Mb/s PHY family and 32-QFN format, but the RNB version is an RMII configuration with a reference-clock output rather than the MNXCA Full MII/RMII configuration.

📋 جایگزین مرجع (خارج از کاتالوگ)

KSZ8091MNXCA مشخصات

Device Type 10/100 Ethernet physical-layer transceiver
Supported Data Rates 10 Mb/s and 100 Mb/s
Ethernet Standards 10Base-T and 100Base-TX
Cable Type CAT-5 unshielded twisted-pair cable
Host Interface Full MII and RMII
Number of Transceivers 1 transceiver
ولتاژ تغذیه کاری 1.2 V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type 32-QFN (5 x 5 x 0.9 mm)
سبک نصب SMD/SMT
Exposed Pad Present
Wake-on-LAN Support Supported
LinkMD Cable Diagnostics Supported
وضعیت RoHS Compliant
Supply Configuration Single supply
Ethernet Media 10Base-T/100Base-TX copper
Interface Compatibility Full MII and RMII

راهنمای پیکربندی پین KSZ8091MNXCA 32-qfn (5 x 5 x 0.9 mm)

پیکربندی پین برای KSZ8091MNXCA (پکیج 32-qfn (5 x 5 x 0.9 mm)). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 32-qfn (5 x 5 x 0.9 mm) برای KSZ8091MNXCA

داده پین‌آوت تفصیلی موجود نیست برای KSZ8091MNXCA.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

KSZ8091MNXCA مناسب است برای 6 کاربردs: Industrial Ethernet Controller, Embedded Network Appliance, IP Camera and Security Equipment, Factory Automation Module, Network Access and Communication Equipment, Test and Measurement Instrument.

🏭

Industrial Ethernet Controller

The KSZ8091MNXCA fits industrial controller boards that communicate over CAT-5 UTP at 10 Mb/s or 100 Mb/s. Its 1.2 V single-supply operation simplifies the PHY power domain, while Full MII and RMII allow selection according to the host controller architecture. The -40 °C to +85 °C operating range supports industrial environments. Use the device between the Ethernet controller and network magnetics, following the manufacturer reference layout to control differential-pair impedance and exposed-pad heat dissipation.

🧩

Embedded Network Appliance

The KSZ8091MNXCA provides a compact 10/100 Ethernet endpoint for embedded Linux, real-time control, and industrial gateway products. Supporting both Full MII and RMII lets the same PHY family serve processors with different host-side bus architectures. At 10 Mb/s and 100 Mb/s, it supports legacy CAT-5 infrastructure without a gigabit PHY. LinkMD diagnostics can help identify cable faults, while Wake-on-LAN supports remote power-management workflows.

🎥

IP Camera and Security Equipment

The KSZ8091MNXCA suits compact IP cameras and security endpoints that require reliable 10/100-Mb/s Ethernet connectivity alongside a dedicated video processor. Its small 32-QFN 5 x 5 mm package supports space-constrained board layouts, and the 1.2 V operating supply can simplify power sequencing around the Ethernet PHY. LinkMD diagnostics are useful for installation troubleshooting, while Wake-on-LAN can support remote maintenance and restart functions in deployed systems.

🏭

Factory Automation Module

The KSZ8091MNXCA can connect factory automation modules to 10/100-Mb/s Ethernet backbones where legacy copper infrastructure is already installed. Its -40 °C to +85 °C range addresses wide industrial temperature conditions, and LinkMD cable diagnostics help maintenance personnel distinguish wiring problems from equipment failures. The device operates from a single 1.2 V supply and supports Full MII or RMII connectivity to an embedded controller, reducing external PHY component count.

🌐

Network Access and Communication Equipment

The KSZ8091MNXCA is appropriate for access terminals, serial-to-Ethernet gateways, and compact communication modules that require a standardized 10Base-T/100Base-TX physical layer. Its Full MII interface can connect to a higher-throughput parallel controller, while RMII reduces host-side wiring in space-constrained implementations. The device supports Wake-on-LAN for remote activation and LinkMD diagnostics for cable fault detection, helping simplify both operation and maintenance.

🔧

Test and Measurement Instrument

The KSZ8091MNXCA can provide a standard 10/100-Mb/s Ethernet management connection in test, measurement, and diagnostic instruments. Its single 1.2 V supply and 32-QFN footprint support compact controller boards, while Full MII and RMII offer flexibility for different processor interfaces. LinkMD diagnostics assist with installed-cable troubleshooting. The 5 x 5 mm exposed-pad package requires careful thermal-pad assembly and layout according to the manufacturer guidance.

What is the KSZ8091MNXCA?
The KSZ8091MNXCA is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver from Microchip Technology. It supports 10 Mb/s and 100 Mb/s operation over standard CAT-5 unshielded twisted-pair cable and provides Full MII and RMII host interfaces. According to the Microchip KSZ8091 product page, it also includes Wake-on-LAN support and LinkMD cable diagnostics.
What are the key specifications of KSZ8091MNXCA that engineers should know?
The KSZ8091MNXCA combines 10 Mb/s and 100 Mb/s Ethernet support, a 1.2 V single supply, Full MII and RMII interfaces, and a 32-QFN 5 x 5 mm package. The operating range is -40 °C to +85 °C. Microchip identifies Wake-on-LAN and LinkMD cable diagnostics as additional device features, making it suitable for compact industrial and embedded Ethernet equipment.
Which Ethernet interfaces does KSZ8091MNXCA support?
The KSZ8091MNXCA supports both Full MII and RMII, as identified in the manufacturer and distributor product descriptions. Full MII exposes a wider parallel control interface, while RMII uses fewer signals between the Ethernet controller and PHY. The interface configuration required by the host controller must be matched during schematic design and PCB layout.
What is the operating voltage of KSZ8091MNXCA?
The KSZ8091MNXCA operates from a 1.2 V supply. The specified operating supply voltage is listed at 1.2 V for this 32-QFN Ethernet PHY. The device is a single-supply component, but the complete Ethernet subsystem may require additional supply rails for the host controller, magnetics, and other board functions.
What is the operating temperature range of KSZ8091MNXCA?
The KSZ8091MNXCA is specified from -40 °C to +85 °C. This range covers industrial and embedded applications requiring broad commercial-temperature operation. Board-level thermal design should still account for heat from the Ethernet controller, magnetics, power conversion circuitry, and enclosure temperature rather than relying only on the PHY junction rating.
Where can I download the KSZ8091MNXCA datasheet PDF?
The official KSZ8091 documentation is available through the Microchip product page at https://www.microchip.com/en-us/product/KSZ8091. A KSZ8091MNX datasheet PDF is also listed at https://www.alldatasheet.com/datasheet-pdf/pdf/887548/MICROCHIP/KSZ8091MNX.html. Use the manufacturer document for authoritative pin assignments, timing, electrical characteristics, and layout guidance.
Where can I find the KSZ8091MNXCA pinout?
The KSZ8091MNXCA pinout is located in the pin-description table of the manufacturer KSZ8091 datasheet. The device uses a 32-QFN package with an exposed pad, so PCB designers should check both numbered perimeter pins and the exposed-pad connection. Assign tracks from the pin-description table and do not infer connectivity from package position alone.
What is the best drop-in replacement for KSZ8091MNXCA?
No uniquely verified drop-in replacement can be selected without checking interface timing, PHY registers, clocking, and exposed-pad requirements. KSZ8081MNXCA and KSZ8081RNACA are same-package candidates found in comparison and site listings, but they may differ in interface details and diagnostic features. Treat them as engineering-review candidates rather than unconditional substitutions and confirm every electrical detail in the manufacturer datasheets.
Can KSZ8081MNXCA replace KSZ8091MNXCA?
KSZ8081MNXCA is a candidate for review because it uses the same 32-QFN 5 x 5 mm class and operates as a 10/100 Mb/s, 3.3 V-class Ethernet PHY. However, the KSZ8091MNXCA provides Full MII and RMII, Wake-on-LAN, and LinkMD diagnostics. Firmware, register-map, clock, magnetics, and pin-function differences must be verified before treating KSZ8081MNXCA as a drop-in replacement.
Is KSZ8091MNXCA suitable for industrial Ethernet equipment?
The KSZ8091MNXCA is suitable for industrial Ethernet equipment requiring 10/100 Mb/s copper connectivity and operation from -40 °C to +85 °C. Its single 1.2 V supply, Full MII and RMII interfaces, Wake-on-LAN support, and LinkMD diagnostics support compact embedded controllers. Industrial qualification of the finished product also depends on the other components, enclosure, and system-level testing.
KSZ8091MNXCA vs KSZ8081MNXCA — which is better for an RMII controller?
The KSZ8091MNXCA is the safer baseline choice when the host controller requires the documented Full MII/RMII feature set, Wake-on-LAN, or LinkMD diagnostics. KSZ8081MNXCA may support a similar 10/100-Mb/s copper design, but its exact RMII behavior and feature differences require datasheet review. The decision should be based on pin functions, register compatibility, clocking, and firmware support rather than package similarity alone.
When should I choose KSZ8091MNXCA over KSZ8081RNACA?
Choose KSZ8091MNXCA when the design benefits from its documented combination of Full MII and RMII, single 1.2 V supply, Wake-on-LAN, and LinkMD diagnostics. KSZ8081RNACA is worth reviewing when its pinout and interface timing satisfy an existing platform, but it should be selected only after confirming that its clock, feature set, and controller driver match the system. Package compatibility alone does not guarantee software compatibility.
What can replace KSZ8091MNXCA?
KSZ8081MNXCA, KSZ8081RNACA, KSZ8091MLX, and KSZ8091RNB are candidate review items from the KSZ80 family because their descriptions indicate 10/100-Mb/s Ethernet PHY operation and related QFN implementations. None should be released as a drop-in substitute without checking all 32 package connections, MII/RMII timing, reference clock, register map, cable diagnostics, and wake functions against the original design.
Where to buy KSZ8091MNXCA online?
Use the Request a Quote form on this page to request current KSZ8091MNXCA availability, unit pricing, and lead time. Commercial terms can change by order quantity, package suffix, and market conditions, so the form is the appropriate route for a current quotation. The exact 32-QFN 5 x 5 mm device and required ordering suffix should be stated on the request.
Is KSZ8091MNXCA in stock and what is its lead time?
Current stock and lead time should be requested through the Request a Quote form on this page. The product description identifies the KSZ8091MNXCA as a 32-QFN 5 x 5 mm Ethernet PHY, but live availability can vary with the exact suffix and manufacturing channel. Include the required quantity, date code needs, and delivery schedule when submitting the request.

داده‌های مرجع مهندسی برای KSZ8091MNXCA — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the KSZ8091MNXCA when a compact board needs a 10/100-Mb/s copper Ethernet PHY with a 1.2 V supply, Full MII or RMII host connectivity, Wake-on-LAN, and LinkMD diagnostics. Its 32-QFN format is particularly useful when the Ethernet controller supports either interface and legacy CAT-5 infrastructure is already installed. Consider KSZ8081MNXCA when its exact features and 3.3 V operating arrangement align with an existing platform, but account for the supply and feature differences. KSZ8091MLX is more appropriate when only MII is required, while KSZ8091RNB is more appropriate for an RMII design needing a reference-clock output. No candidate should be approved solely from package similarity; confirm pin assignments, timing, registers, diagnostics, clocking, and thermal-pad assembly before substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول KSZ8081MNXCA KSZ8081RNACA KSZ8091MLX KSZ8091RNB
Package 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Data Rate 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s

تفاوت‌های کلیدی

  • Supports both parallel Full MII and reduced-pin RMII interfaces (در مقابلKSZ8091MLX)
  • RMII configuration includes reference-clock output (در مقابلKSZ8091RNB)
  • Single 1.2 V operating supply (در مقابلKSZ8081MNXCA)
  • Integrated cable diagnostics and remote activation support (در مقابلKSZ8081RNACA)

یادداشت‌های طراحی

Use the manufacturer KSZ8091 reference layout and pin-description table for all 32-QFN connections. Keep the 100BASE-TX differential pairs short, continuous, impedance controlled, and isolated from digital clocks and switching supplies. Route the exposed-pad connection and thermal vias according to the package and assembly recommendations because this 5 x 5 mm device requires deliberate heat spreading.

Design the 1.2 V PHY rail with low-noise local decoupling and verify startup behavior across the full 1.2 V operating condition. The 32-QFN exposed pad must be connected according to the manufacturer layout and assembly instructions. Because Ethernet magnetics and the host controller can generate substantial transient current, isolate noisy supply paths and confirm voltage tolerance at the PHY pins under load.

Treat the RMII or MII interface as a timing-critical synchronous interface. Match trace lengths where required by the host-controller specification, provide a clean reference clock, and avoid routing these signals through noisy power-converter regions. Validate rise time, timing margin, and reference-clock jitter with the intended controller rather than relying on nominal Ethernet data rate alone.

Do not substitute an Ethernet PHY solely because it uses a 32-QFN package. Before replacing the KSZ8091MNXCA, compare every pin function, MII/RMII timing, reference-clock source, register address, interrupt behavior, cable-diagnostic feature, Wake-on-LAN implementation, magnetics recommendation, and exposed-pad connection. Software drivers may also depend on the original PHY's register map.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

RoHS compliance is stated in the product listing. No additional compliance claims are made without an explicit product-level statement.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

KSZ8091MNXCA datasheet KSZ8091MNXCA pinout KSZ8091MNXCA datasheet pdf KSZ8091MNXCA equivalent KSZ8091MNXCA replacement KSZ8091MNXCA price KSZ8091MNXCA stock KSZ8091MNXCA 32-QFN KSZ8091MNXCA vs KSZ8081MNXCA Microchip KSZ8091MNXCA KSZ8091 10/100 Ethernet PHY KSZ8091MNXCA industrial Ethernet

قطعات و اصطلاحات مرتبط

Microchip Technology KSZ8091MNXCA KSZ8081MNXCA KSZ8081RNACA KSZ8091MLX KSZ8091RNB Ethernet PHY 10Base-T 100Base-TX Full MII RMII CAT-5 UTP Wake-on-LAN LinkMD cable diagnostics 32-QFN QFN package family surface-mount technology Ethernet physical layer MAC controller network magnetics 1.2 V single supply industrial Ethernet network communications RoHS
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ