LAN9500AI-ABZJ-TR USB 2.0 Ethernet Controller | Microchip
MPN: LAN9500AI-ABZJ-TR ✓ نشطLAN9500AI-ABZJ-TR نظرة عامة
A USB-to-Ethernet controller is an interface IC that bridges a USB host connection and an Ethernet network. It combines protocol conversion, media-access control, and physical-layer signaling in one device, reducing the component count required for USB-to-10/100-Ethernet equipment. Within the interface-controller hierarchy, the LAN9500AI belongs to the USB interface and Ethernet controller family and operates as a bridge between a USB 2.0 host and an IEEE 802.3 network.
The device provides Control, Interrupt, Bulk-in, and Bulk-out USB endpoints through its internal USB 2.0 device controller and PHY. Its Ethernet side supports auto-negotiation, auto-polarity correction, and HP Auto-MDIX. These features allow the controller to connect through straight-through or crossover cabling while negotiating 10 Mbps or 100 Mbps operation without fixed DIP-switch configuration.
The LAN9500A family is positioned as a cost-competitive connectivity solution for USB-to-Ethernet products. Because the controller integrates both the Ethernet MAC and PHY, a compact design still requires external magnetics, passives, clocking or crystal components, and carefully arranged high-speed signal paths. The 56-lead QFN form factor is intended for surface-mount assembly and demands a controlled land pattern and thermal-pad layout.
Typical uses include industrial USB gateways, test equipment, set-top and media systems, USB-to-Ethernet adapters, printer interfaces, embedded data acquisition systems, and portable communication equipment. In these systems, the LAN9500AI-ABZJ-TR provides a direct digital interface between a USB host and a 10/100 Ethernet network while adding automatic speed and cable handling.
PCB implementation should follow Microchip's LAN950x layout guidance. Keep the USB differential pair and Ethernet magnetic-device interface paths short, match the differential pair geometry, place decoupling close to the supply pins, and provide clean grounding around the PHY. Review the required EXRES resistor and supporting component values against the specific LAN9500A or LAN9500Ai variant before production release.
This product page consolidates the manufacturer family information, package details, interface characteristics, qualified replacement discussion, and application guidance into a practical engineering reference for USB-to-Ethernet product design.
بدائل مباشرة لـ LAN9500AI-ABZJ-TR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع LAN9500AI-ABZJ-TR (نفس عامل الشكل والبصمة) — يختلف في RoHS Status, Package, USB Interface, Ethernet Speed, Ethernet Standards.
LAN9500I-ABZJ-TR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LAN9500A-ABZJ-TR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LAN9730-ABZJ-TR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LAN9730I-ABZJ
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LAN9500AI-ABZJ-TR المواصفات
| Product Type | USB 2.0 to 10/100 Ethernet controller |
| USB Interface | USB 2.0 Hi-Speed |
| Maximum USB Data Rate | 480 Mbps |
| Ethernet Data Rates | 10 Mbps and 100 Mbps |
| Ethernet Physical Layer | Integrated 10/100 Base-T/TX PHY |
| Ethernet Interface | IEEE 802.3 and IEEE 802.3u compliant |
| Cable Handling | HP Auto-MDIX |
| Negotiation | Auto-negotiation |
| Polarity Handling | Auto-polarity correction |
| USB Endpoints | Control, Interrupt, Bulk-in, and Bulk-out |
| External MII Support | Available |
| جهد التغذية | 3.3 V |
| العلبة | 56-pin QFN with exposed pad |
| Package Dimensions | 8 mm x 8 mm |
| نوع التركيب | Surface mount |
| Packaging | Tape and reel |
| Lead-Free Status | Lead-free |
| حالة RoHS | Compliant |
دليل تكوين أطراف LAN9500AI-ABZJ-TR 8 mm x 8 mm
تكوين الأطراف لـ LAN9500AI-ABZJ-TR (حزمة 8 mm x 8 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LAN9500AI-ABZJ-TR.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
LAN9500AI-ABZJ-TR مناسب لـ 6 التطبيقs: Industrial USB-to-Ethernet Gateways, USB Network Test Equipment, Printers and Media Peripherals, Embedded Data Acquisition Systems, Portable Communication Equipment, Set-Top and Media Systems.
Industrial USB-to-Ethernet Gateways
The LAN9500AI-ABZJ-TR fits industrial gateway designs that must expose an Ethernet interface through a USB host connection. Its integrated USB 2.0 controller, Ethernet MAC, and 10/100 PHY provide a 480 Mbps USB path and 10 Mbps or 100 Mbps network operation without requiring separate MAC and PHY devices. Auto-negotiation, auto-polarity correction, and HP Auto-MDIX simplify connection to industrial equipment with varying network speeds and cable arrangements. The 56-QFN 8 mm by 8 mm package also supports compact controller sections, although the exposed-pad land pattern, magnetic-device isolation, and low-noise layout remain essential.
موصى به
USB Network Test Equipment
The LAN9500AI-ABZJ-TR is appropriate for USB-based test and measurement equipment that needs a standard 10/100 Ethernet connection to a host. The integrated MAC and PHY reduce the interface complexity of the instrument while allowing USB 2.0 operation at rates up to 480 Mbps. HP Auto-MDIX removes the need for users to distinguish crossover and straight-through leads, while auto-negotiation allows the equipment to connect to either 10 Mbps or 100 Mbps network ports. For reliable measurements, place the PHY and magnetics section away from high-current switching nodes and follow Microchip's LAN950x differential-pair and grounding guidance.
موصى به
Printers and Media Peripherals
The LAN9500AI-ABZJ-TR can connect a USB-enabled printer, media appliance, or set-top accessory to a 10/100 Ethernet network. Its single-chip integration of USB, Ethernet MAC, and PHY minimizes board area around the network interface, and HP Auto-MDIX improves compatibility with varied installation cabling. Auto-negotiation supports both 10 Mbps and 100 Mbps network environments, which is useful for legacy equipment. The controller's 56-QFN package requires a thermal-pad-aware footprint, and the Ethernet magnetics must be placed close to the network connector according to the manufacturer layout guidelines.
موصى به
Embedded Data Acquisition Systems
The LAN9500AI-ABZJ-TR is well suited to embedded acquisition systems that collect data on a USB-connected host and transfer it through Ethernet. The USB controller supports Control, Interrupt, Bulk-in, and Bulk-out endpoints, while the integrated 10/100 PHY provides a direct network interface with automatic speed selection. This combination allows a compact instrument to bridge local USB connectivity and an external Ethernet segment without a separate network controller. System designers should isolate the Ethernet magnetics, preserve differential-impedance control on USB and Ethernet routes, and verify the external component values required by the selected LAN9500Ai ordering code.
موصى به
Portable Communication Equipment
The LAN9500AI-ABZJ-TR can add wired Ethernet connectivity to portable or networked accessories built around a USB host interface. Its 480 Mbps Hi-Speed USB interface and 10/100 Ethernet support cover common control, monitoring, and data-transfer workloads while automatic cable and speed handling reduce configuration effort. The compact 56-QFN package helps preserve board area in portable equipment, but enclosure heat, connector grounding, and cable transient exposure must be considered. A robust implementation should follow the manufacturer layout guidance for the USB differential pair, PHY supply filtering, Ethernet magnetic device, and exposed thermal pad.
موصى به
Set-Top and Media Systems
The LAN9500AI-ABZJ-TR supports set-top boxes, media players, and conferencing endpoints that require Ethernet networking without allocating a large controller area. Integrating USB 2.0, the Ethernet MAC, and the 10/100 PHY provides a concise connectivity solution, while 10 Mbps and 100 Mbps auto-negotiation accommodates different home and enterprise network ports. HP Auto-MDIX improves installation flexibility, especially when users may connect through different cable arrangements. The design must still provide the manufacturer's required Ethernet magnetics, decoupling, clock components, and EXRES implementation while maintaining controlled spacing between the network interface and noisy system circuitry.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ LAN9500AI-ABZJ-TR — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | LAN9500I-ABZJ-TR | LAN9500A-ABZJ-TR | LAN9730-ABZJ-TR | LAN9730I-ABZJ |
|---|---|---|---|---|---|
| Package | 56-pin QFN (8 mm x 8 mm) | 56-pin QFN | 56-pin QFN | 56-pin QFN | 56-pin QFN |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Function | USB 2.0 to 10/100 Ethernet controller | USB 2.0 to 10/100 Ethernet controller | USB 2.0 to 10/100 Ethernet controller | USB 2.0 to 10/100 Ethernet controller | USB 2.0 to 10/100 Ethernet controller |
| USB Interface | USB 2.0 Hi-Speed | USB 2.0 Hi-Speed | USB 2.0 Hi-Speed | USB 2.0 Hi-Speed | USB 2.0 Hi-Speed |
| Ethernet Data Rates | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
| Supply Configuration | Multi-supply LAN9500A-family implementation | 3.3 V operating range identified for LAN9500I | Multiple supply voltages identified for LAN9500A family | Single 3.3 V supply | Single 3.3 V supply |
| External Component Configuration | LAN9500Ai-specific EXRES and supporting component values | Different EXRES and supporting component values | Different EXRES and supporting component values | LAN9730-family-specific implementation | LAN9730-family-specific implementation |
أبرز الفروقات
- Single-chip USB and 10/100 Ethernet integration (مقابلKSZ8041TLI-TR)
- Automatic cable and speed handling (مقابلLAN9730I-ABZJ)
- USB Hi-Speed host connectivity (مقابلLAN9730-ABZJ-TR)
ملاحظات التصميم
Follow Microchip's LAN950x layout guidelines for the USB differential pair, Ethernet magnetic-device interface, supply connections, and exposed pad. Place input and bulk decoupling capacitors close to their associated supply pins, connect the exposed pad to the ground plane through a full package footprint, and keep the Ethernet magnetics close to the network connector. These placement decisions reduce trace inductance, ground-plane disruption, and signal-integrity degradation.
Do not treat every LAN9500-family ordering code as an automatic drop-in substitution. Microchip states that LAN9500 and LAN9500A devices are pin compatible but that the required EXRES resistor and other system components differ. Compare the exact schematic, BOM, clock requirements, supply network, and exposed-pad connection before approving LAN9500I-ABZJ-TR, LAN9500A-ABZJ-TR, or a LAN9730-family alternative.
Maintain continuous reference planes beneath USB and Ethernet differential routes and avoid placing those routes over split power or ground planes. Respect the USB differential impedance target defined by the board design, minimize stub branches, and avoid routing Ethernet and USB pairs beneath or between switching-regulator power loops. Keep noisy clocks and switching nodes away from the PHY and magnetics section to reduce radiated emissions and susceptibility to timing errors.
Use the exposed pad as both an electrical ground connection and a heat-spreading structure. The maximum acceptable dissipation depends on the local board thermal resistance, ambient temperature, and the USB and Ethernet activity profile. Estimate junction temperature from worst-case supply power, total package dissipation, and the PCB-specific thermal path, then increase copper area or board venting if the calculated margin is insufficient.
معلومات الامتثال
Microchip's LAN950x databook identifies the 56-pin QFN LAN9500 family package as lead-free and RoHS compliant. No specific REACH, halogen-free, or conflict-minerals declaration was established for the exact ordering code.