LAN9500I-ABZJ-TR USB 2.0 to 10/100 Ethernet Controller
MPN: LAN9500I-ABZJ-TR ✓ ActiveLAN9500I-ABZJ-TR Overview
A USB-to-Ethernet controller is an interface IC that translates data between a host USB connection and an Ethernet network. It sits within the USB interface IC and Ethernet controller hierarchy, combining protocol conversion, Ethernet MAC functionality, and a 10/100 Ethernet PHY. This integration reduces the component count and board area required to add wired networking to embedded systems, industrial equipment, printers, set-top boxes, and other USB-capable products.
The LAN9500I-ABZJ-TR provides a Hi-Speed USB 2.0 interface and 10/100 Ethernet connectivity. Its industrial-temperature rating of -40°C to +85°C distinguishes it from the commercial LAN9500 variants rated from 0°C to +70°C. The lead-free, RoHS-compliant 56-QFN package is designed for compact surface-mount assemblies, while the -TR ordering suffix identifies the tape-and-reel shipping configuration.
The LAN9500 family is based on the SMSC LAN950x architecture, which integrates a USB 2.0 device controller, 10/100 Ethernet MAC, and Ethernet PHY. The manufacturer datasheet states that the LAN9500 and LAN9500A families are pin-compatible, although the required EXRES resistor value and some other system components differ. That distinction is important when evaluating replacements because a footprint match alone does not guarantee identical bill-of-materials behavior.
Typical uses include USB Ethernet adapters, industrial control equipment, network printers, set-top boxes, digital television products, gaming consoles, and embedded data-acquisition systems. The industrial temperature range makes the LAN9500I suitable for factory equipment, while its integrated USB and Ethernet functions simplify implementation of a compact network interface.
PCB design should preserve the layout and component values specified for the selected LAN9500 family member. Place the required passive components close to their associated supply, crystal, and Ethernet differential-pair pins, and route the 10/100 Ethernet pairs as controlled-impedance differential signals. Review the EXRES requirement and crystal circuit against the manufacturer reference design before releasing the layout.
This page compares same-footprint LAN9500, LAN9500A, LAN9730, and LAN7500 options while highlighting the temperature-range, system-component, and supply differences that affect replacement decisions. It also summarizes package constraints, sourcing considerations, and practical integration guidance for engineers evaluating the LAN9500I-ABZJ-TR.
Drop-in alternatives for LAN9500I-ABZJ-TR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with LAN9500I-ABZJ-TR (same form factor and footprint) — differing in Package, USB Interface, RoHS Status, Operating Temperature, Supply Voltage.
LAN9500A-ABZJ-TR
✅ Drop-InContact for price
View Datasheet →LAN9500AI-ABZJ-TR
✅ Drop-InContact for price
View Datasheet →LAN9730-ABZJ-TR
✅ Drop-InContact for price
View Datasheet →LAN9730I-ABZJ-TR
✅ Drop-InContact for price
View Datasheet →LAN7500I-ABZJ-TR
✅ Drop-InContact for price
View Datasheet →LAN9500I-ABZJ-TR Specifications
| Device Type | USB 2.0 to 10/100 Ethernet controller |
| USB Interface | Hi-Speed USB 2.0 |
| Ethernet Data Rate | 10/100 Mb/s |
| Ethernet PHY | Integrated 10/100 Base-T/TX PHY |
| Integrated Functions | USB device controller, 10/100 Ethernet MAC, and Ethernet PHY |
| Package Type | 56-pin QFN, 8 x 8 mm |
| Mounting Type | Surface mount |
| Operating Temperature Range | -40°C to +85°C |
| Shipping Package | Tape and reel |
| Lead-Free Status | Lead-free package |
| RoHS Status | RoHS compliant |
| Maximum USB Full-Speed Data Rate | 12 Mb/s |
| Maximum USB Hi-Speed Data Rate | 480 Mb/s |
LAN9500I-ABZJ-TR tape and reel Pin Configuration Guide
Pin configuration for LAN9500I-ABZJ-TR (tape and reel package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for LAN9500I-ABZJ-TR.
Refer to the datasheet for full pin configuration.
Typical Applications
LAN9500I-ABZJ-TR is suitable for 6 applications: Industrial USB Ethernet Adapter, Network Printer Connectivity, Set-Top Box and Digital TV, Gaming Console Network Interface, Embedded Data Acquisition System, Security Camera Network Adapter.
Industrial USB Ethernet Adapter
The LAN9500I-ABZJ-TR is suitable for an industrial USB-to-Ethernet adapter because it combines a Hi-Speed USB 2.0 interface with a 10/100 Ethernet controller and PHY in one 56-QFN device. Its -40°C to +85°C operating range supports equipment used in factories, warehouses, and process environments where a 0°C to +70°C commercial controller may not provide enough thermal margin. Place the device between the USB host connector and the Ethernet magnetics, then follow the manufacturer layout for the clock, supply, USB, and 10/100 differential pairs. The integrated MAC and PHY reduce external controller count, while the 8 x 8 mm package keeps the interface compact.
Recommended
Network Printer Connectivity
A network printer can use the LAN9500I-ABZJ-TR to add 10/100 Mb/s Ethernet without requiring a separate Ethernet MAC, PHY, and USB interface controller. The integrated Hi-Speed USB 2.0 connection suits printers with an existing USB host port, while the industrial temperature range covers office equipment installed in factories or warehouses. The 56-QFN device is placed close to the USB and Ethernet connectors, with controlled-impedance routing required for both interfaces. Designers should use the manufacturer-specified support components and validate firmware, network management, and print-service compatibility before production.
Recommended
Set-Top Box and Digital TV
The LAN9500I-ABZJ-TR is appropriate for set-top boxes and digital television systems that need a compact wired Ethernet interface alongside a USB host connection. Its integrated 10/100 Ethernet MAC and PHY avoid a separate physical-layer device, while Hi-Speed USB 2.0 support provides a practical host interface for accessories or service functions. The industrial-grade temperature capability gives manufacturers additional margin for enclosed equipment exposed to elevated internal temperatures. Layout should isolate the Ethernet differential pairs from switching and high-current paths, and the external magnetics, clock, and filtering arrangements must match the manufacturer reference design.
Recommended
Gaming Console Network Interface
The LAN9500I-ABZJ-TR can provide a 10/100 Ethernet network path in a gaming console or compact entertainment system that already uses USB 2.0 for peripheral or service connectivity. Combining the USB device controller, Ethernet MAC, and Ethernet PHY in one 56-QFN package reduces board area compared with a discrete network interface. The -40°C to +85°C rating supports use in entertainment hardware placed in varied ambient conditions. Because wired Ethernet can involve interrupt-driven traffic, firmware and driver behavior must be validated alongside the electrical design, particularly if the host uses a nonstandard USB stack.
Recommended
Embedded Data Acquisition System
The LAN9500I-ABZJ-TR is useful in embedded data-acquisition equipment that must transfer measurement data over 10/100 Ethernet while exposing a USB connection for configuration or local storage. Its integrated Ethernet MAC and PHY simplify the hardware architecture, and the industrial temperature range supports use in laboratory and industrial monitoring installations. Place the Ethernet magnetics near the connector, keep the differential pair geometry continuous, and maintain separation from switching regulators and digital clocks. Validate the host-side USB driver, network throughput, packet loss, and recovery behavior under sustained data transfer before deployment.
Recommended
Security Camera Network Adapter
A USB-connected security camera can use the LAN9500I-ABZJ-TR to add 10/100 Ethernet connectivity for remote video transmission and configuration. The controller consolidates the USB device interface, Ethernet MAC, and Ethernet PHY into an 8 x 8 mm QFN package, leaving more board space for imaging and processing components. Its -40°C to +85°C range is advantageous for cameras installed in cabinets, vehicles, or outdoor enclosures where internal temperatures can exceed the commercial range. Designers should account for Ethernet magnetics, surge protection, isolation requirements, and the substantial continuous traffic associated with video streaming.
Recommended
Recommended Products Summary
Engineering reference data for LAN9500I-ABZJ-TR — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | LAN9500A-ABZJ-TR | LAN9500AI-ABZJ-TR | LAN9730-ABZJ-TR | LAN9730I-ABZJ-TR | LAN7500I-ABZJ-TR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) | 56-QFN (8 x 8 mm) |
| Function | Hi-Speed USB 2.0 to 10/100 Ethernet controller | Hi-Speed USB 2.0 to 10/100 Ethernet controller | Hi-Speed USB 2.0 to 10/100 Ethernet controller | USB 2.0 to 10/100 Ethernet controller | USB 2.0 to 10/100 Ethernet controller | Integrated USB Ethernet controller |
Key Differentiators
- Industrial-temperature capability (vs LAN9500A-ABZJ-TR)
- Same LAN9500 family architecture and package (vs LAN9500AI-ABZJ-TR)
- Existing multi-supply LAN9500 board compatibility (vs LAN9730-ABZJ-TR)
Design Notes
Follow the manufacturer reference layout for the USB and 10/100 Ethernet interfaces. Keep the Ethernet differential pairs continuous with matched spacing, route them away from switching-node and clock traces, and place the associated magnetics or magnetics interface near the connector. Place required decoupling and support components close to their designated pins. The 8 x 8 mm QFN outline leaves limited escape space, so land-pattern and assembly clearances should be checked before routing.
Do not treat pin compatibility as proof that the entire circuit is interchangeable. The Microchip datasheet specifically states that the LAN9500 and LAN9500A families are pin-compatible but that the required EXRES resistor and other system components differ. When replacing LAN9500I-ABZJ-TR, review the regulator arrangement, EXRES value, clock network, filtering, and device-specific initialization rather than changing only the IC marking.
Design the supply network for each required voltage rail and validate startup, steady-state current, and ripple at the operating temperature extremes. LAN9500-family devices use multiple supply rails, while the LAN9730 alternatives identified for comparison use a 3.3 V single-supply approach. Confirm the selected replacement's power states and decoupling requirements in its datasheet. Use local bulk and high-frequency bypass capacitance, and keep supply loops compact around the QFN power and ground connections.
Treat the USB and Ethernet links as controlled-impedance interfaces rather than ordinary low-speed nets. Maintain the reference-plane continuity beneath the differential pairs, avoid stubs and test pads that disrupt impedance, and apply the manufacturer's layer-stack and via guidance. Separate Ethernet routing from noisy clocks, DC-DC converters, and high-speed memory where possible. If an Ethernet link is intermittent, inspect pair geometry and magnetics placement before changing controller software.
Compliance Information
The Microchip datasheet identifies the LAN9500i-ABZJ-TR ordering option as a lead-free, RoHS-compliant 56-pin QFN package. Other compliance classifications require manufacturer confirmation.