Texas Instruments

LM2901MWA Quad Open-Collector Comparator | Texas Instruments

MPN: LM2901MWA ✓ نشط
7000 uV Vdss 2 mA Id Die Package
الحد الأدنى للطلب: 1 |

LM2901MWA نظرة عامة

The Texas Instruments LM2901MWA is a four-function differential analog comparator offered in wafer-sale form for industrial-temperature applications. It combines a maximum input offset voltage of 7000 uV, a response time of 1300 ns, a maximum supply current of 2 mA, and an operating temperature range of -40°C to +85°C. The device provides open-collector outputs suitable for TTL, MOS, and CMOS interfacing.

An analog comparator is an integrated circuit that compares two input voltages and produces a logic-level indication of their relative relationship. The LM2901 belongs to the comparator hierarchy within analog signal conditioning and power-management electronics. Its four independent channels make it suitable when several sensing or threshold decisions must be performed in one package. The common-mode input range includes ground, while differential input voltage can reach the maximum-rated supply voltage of ±38 V.

The principal features support robust threshold detection and low-level sensing. Open-collector outputs allow the output state to be established with an external pull-up resistor, which provides flexibility for interfacing to mixed logic families and for wired-AND arrangements. The 7000 uV maximum offset specification defines the worst-case input-voltage difference that can affect switching behavior, while the 1300 ns response time establishes the nominal propagation performance of the comparator.

Each of the four comparator channels is independent, allowing separate sensing tasks within a single die. The industrial temperature rating supports equipment operating across a broad ambient range, and the 2 mA maximum supply current suits low-power signal-conditioning systems. The LM2901 family is commonly used for level detection, low-level sensing, and memory-related control functions, where a voltage threshold must be translated into a digital state.

Typical uses include industrial sensor interfaces, overvoltage and undervoltage detection, battery threshold monitoring, window comparators, and control logic for power systems. Because the output is open collector, the designer can select the pull-up voltage and resistor to match the receiving logic rather than relying on a fixed active-high or active-low output arrangement.

LM2901MWA is supplied as an unpackaged die rather than a conventional leaded or surface-mount package. Board-level implementation therefore requires wafer handling, die attachment, bonding, encapsulation, and qualification of the assembled product. Its absence from the package library and the lack of a public package pin numbering are important constraints when planning assembly or comparing it with packaged LM2901 devices.

This page combines the LM2901MWA ordering characteristics, functional limits, comparator specifications, interface considerations, and procurement guidance with a separate evaluation of true drop-in alternatives. Because the target is a wafer-sale die, only an equivalent offered in the same physical form can qualify as a drop-in replacement; standard SOIC or DIP implementations are electrically related but are not interchangeable on a PCB.

بدائل مباشرة لـ LM2901MWA — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

LM2901MWA الحدود القصوى والخصائص الكهربائية

Comparator Type Differential analog comparator
Number of Comparator Channels 4 channels
Maximum Input Offset Voltage 7000 uV
Response Time 1300 ns
نطاق درجة حرارة التشغيل -40°C to +85°C
Maximum Supply Current 2 mA
Maximum Negative Supply Voltage Limit 0 V
Differential Input Voltage Range ±38 V
Common-Mode Input Range Includes ground
نوع الخرج Open collector
Logic Compatibility TTL, MOS, and CMOS
Application Category General-purpose comparator
Temperature Grade Industrial
Terminal Form No lead
Package Code Die
Package Shape Unspecified
Order Form Wafer sale
Mounting Method Unpackaged die assembly

دليل تكوين أطراف LM2901MWA unspecified

تكوين الأطراف لـ LM2901MWA (حزمة unspecified). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة unspecified لـ LM2901MWA

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LM2901MWA.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

LM2901MWA مناسب لـ 6 التطبيقs: Industrial Sensor Threshold Detection, Battery Voltage Monitoring, Overvoltage and Undervoltage Protection, Window and Limit Comparison, Control Logic and Memory Interface, Custom Multi-Channel Analog Front End.

🏭

Industrial Sensor Threshold Detection

The Texas Instruments LM2901MWA fits industrial sensor threshold detection because each of its four channels can compare a conditioned sensor voltage against a reference level. The industrial temperature range of -40°C to +85°C supports equipment operating across a broad ambient range, while the 7000 uV maximum input offset voltage defines the threshold uncertainty that must be included in system calibration. Place the unused channels in a defined state according to the datasheet. Because LM2901MWA is supplied as an unpackaged die, the sensing assembly must use an established die-attachment and bonding process rather than a standard PCB footprint.

⚡

Battery Voltage Monitoring

LM2901MWA can implement battery voltage monitoring by comparing a divided battery voltage against precision thresholds and generating open-collector status signals. Its maximum supply current of 2 mA is useful in low-power systems, while the common-mode input range includes ground supports sensing near the lower end of a single-supply range. Four independent channels can monitor separate voltage rails or provide early-warning thresholds. The 1300 ns response time is normally much faster than required for battery supervision, allowing margin for filtering and debounce. A packaged implementation may be preferable when the product uses a conventional surface-mount assembly flow.

🔧

Overvoltage and Undervoltage Protection

The four comparator channels in LM2901MWA can supervise positive and negative rails for overvoltage and undervoltage conditions. Its differential input-voltage capability extends to ±38 V, and the open-collector output allows a supervisor signal to be pulled up to the voltage required by the system controller. Designers should add resistor-divider scaling, input filtering, and hysteresis to prevent repeated switching when noise moves the monitored voltage across a threshold. The 7000 uV maximum offset contribution must be considered alongside divider tolerance and reference accuracy. For new PCB designs, a packaged comparator may reduce assembly complexity while retaining the same general LM2901 function.

📡

Window and Limit Comparison

LM2901MWA is suitable for window-comparison circuits where an input must remain between an upper and lower limit. Two channels can establish opposite threshold polarities, while the remaining channels can monitor other rails or provide redundant decisions. Its 1300 ns response time supports fast event detection, and the open-collector outputs can drive TTL, MOS, or CMOS systems using an appropriate pull-up network. Include hysteresis and input filtering in the analog path to avoid chatter from noise. The wafer-sale format requires an assembly method capable of die bonding and encapsulation, so packaged LM2901 implementations remain more convenient where existing surface-mount infrastructure is available.

🖥️

Control Logic and Memory Interface

The LM2901MWA family is intended for level detection, low-level sensing, and memory-related control functions, making its four open-collector channels appropriate for simple decision logic. Each channel compares two external analog signals and produces a logic indication through a pulled-up output. The 2 mA maximum supply current supports low-power operation, while the -40°C to +85°C rating supports industrial equipment. Logic designers should account for the 7000 uV maximum input offset and 1300 ns response time when setting thresholds and sequencing. Because LM2901MWA is an unpackaged die, its use is most appropriate when the product already includes a controlled semiconductor assembly flow.

🔧

Custom Multi-Channel Analog Front End

LM2901MWA can serve as the comparison element in a custom multi-channel analog front end when four threshold decisions must share one die. The open-collector outputs provide a common digital interface style, and the ability to choose an external pull-up voltage allows the comparator section to coexist with TTL, MOS, or CMOS logic. Account for channel-to-channel behavior, input bias effects, and the 7000 uV maximum offset during analog calibration. The 1300 ns response time is suitable for many sensor and control paths but should be checked against system timing. For volume production without bare-die capability, a packaged LM2901 or another compatible quad comparator is typically the lower-risk manufacturing choice.

What is the Texas Instruments LM2901MWA?
The Texas Instruments LM2901MWA is a four-channel differential analog comparator offered as an industrial-temperature wafer-sale die. It provides open-collector outputs, a maximum input offset voltage of 7000 uV, a 1300 ns response time, and an operating range of -40°C to +85°C. Texas Instruments identifies the LM2901 family as a general-purpose comparator for level detection and low-level sensing.
Where can I download the LM2901MWA datasheet PDF?
The LM2901MWA datasheet should be obtained from the official Texas Instruments LM2901 product page at https://www.ti.com/product/LM2901. The product documentation identifies the LM2901EP as a low-power, low-offset-voltage quad comparator and notes that the B-version is a drop-in replacement for LM239, LM339, and LM2901 A and V versions. Use the package-ordering information to confirm applicability to the wafer-sale configuration.
Where can I find the LM2901MWA pinout?
The LM2901MWA does not have a conventional numbered PCB pinout because it is supplied as a die. Its terminal form is no lead and its package code is die, so bond-pad locations must be obtained from the manufacturer’s wafer-sale documentation or package drawing. Do not assign SOIC or DIP pin numbers to the LM2901MWA die without obtaining the corresponding die drawing.
Is LM2901MWA in stock and available for order?
The LM2901MWA is offered for order as a wafer-sale part, but current stock should be confirmed through the Request a Quote form on this page. Because the product is an unpackaged die rather than a standard stocked package, availability can depend on wafer quantity, die orientation, inspection requirements, and the buyer’s assembly process. Request current lot, marking, and delivery information before committing a production schedule.
What is the price of LM2901MWA?
Current commercial terms for LM2901MWA should be requested through the Request a Quote form on this page. The part is sold as a wafer-sale die, so a meaningful quotation should specify the required quantity, wafer format, die orientation, inspection level, shipment method, and any assembly or traceability requirements rather than treating the order as a conventional packaged-component purchase.
What is the lead time for LM2901MWA?
The current lead time for LM2901MWA must be obtained through the Request a Quote form on this page. Wafer-sale lead time can depend on the available lot, wafer quantity, testing, and inspection criteria. Provide the required wafer diameter, quantity, orientation, marking, and quality requirements with the request so the supplier can quote a realistic delivery schedule.
LM2901MWA vs LM2901M — which is easier to assemble?
LM2901MWA is easier to evaluate electrically but harder to assemble because it is supplied as an unpackaged die, while LM2901M is offered in a conventional 14-SOP package. The LM2901MWA has a 7000 uV maximum input offset voltage, 1300 ns response time, and -40°C to +85°C operating range. LM2901M is the better choice when a standard surface-mount footprint and conventional board assembly are required.
What is the difference between LM2901MWA and packaged LM2901 devices?
The functional difference is principally the delivery and assembly format: LM2901MWA is a wafer-sale die with no lead, while packaged LM2901 devices use conventional leaded or surface-mount packages. The LM2901MWA provides four comparator functions, open-collector outputs, a 7000 uV maximum offset, a 1300 ns response time, and a -40°C to +85°C operating range. A packaged version is not a physical drop-in substitute for the die.
When should I choose LM2901MWA over a packaged LM2901?
Choose LM2901MWA when the assembly process already supports bare-die handling and the design benefits from integrating the LM2901 quad comparator into a custom semiconductor package or multichip module. Choose a packaged LM2901 when direct PCB placement, automated surface-mount assembly, or a conventional procurement and inspection flow is more important. The LM2901MWA is a die, not a board-ready package.
Is LM2901MWA suitable for industrial sensing applications?
Yes, LM2901MWA is suitable for industrial sensing applications because it is specified for -40°C to +85°C operation and provides four comparator functions. Its open-collector output can drive TTL, MOS, and CMOS interfacing through an external pull-up. The 7000 uV maximum offset and 1300 ns response time should be checked against the required threshold accuracy and decision speed.
What can replace LM2901MWA?
A true drop-in replacement for LM2901MWA must also be supplied as a die and provide the same four-channel comparator configuration and compatible electrical characteristics. Packaged LM2901 devices such as LM2901M are not drop-in replacements because their SOIC-14 footprint differs from an unpackaged die. Use the manufacturer’s wafer-sale ordering documents to locate an equivalent die before attempting substitution.
What is the best onsemi equivalent for LM2901MWA?
The onsemi LM2901M is functionally close as a four-channel general-purpose open-collector comparator, but it is supplied in a 14-SOP package. It is therefore not a physical drop-in replacement for the LM2901MWA wafer-sale die. It can serve as an engineering reference for electrical comparison, but final selection requires checking offset voltage, response time, supply current, common-mode range, and the actual die or package documentation.
What are the key specifications of LM2901MWA that engineers should know?
The key LM2901MWA specifications are four independent comparator functions, a 7000 uV maximum input offset voltage, a 1300 ns response time, a 2 mA maximum supply current, and a -40°C to +85°C operating range. Its outputs are open collector and compatible with TTL, MOS, and CMOS logic. The defining mechanical characteristic is wafer-sale, no-lead die packaging rather than a standard PCB package.
How should an open-collector LM2901MWA output be connected?
The LM2901MWA open-collector output requires an external pull-up resistor to the supply used by the receiving logic. The resistor establishes the high output level and limits current when the comparator transistor pulls the output low. Confirm that the output can sink the required current, and use the manufacturer’s output-current and saturation-voltage limits when selecting the pull-up value.
Can the LM2901MWA comparator inputs exceed ground?
The LM2901MWA common-mode input-voltage range includes ground, which is important for low-level sensing powered from a single supply. Differential input voltage can extend to the maximum-rated supply voltage of ±38 V, but both input nodes must remain within the allowed common-mode operating region. Exceeding either limit can cause incorrect output behavior or damage even when the differential voltage is acceptable.

بيانات مرجعية هندسية لـ LM2901MWA — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose LM2901MWA when your assembly operation already supports wafers, die attachment, wire bonding, and custom encapsulation and the design needs four general-purpose comparator channels in one die. Its open-collector outputs support TTL, MOS, or CMOS interfacing, while the -40°C to +85°C range suits industrial equipment. Choose packaged LM2901M when standard surface-mount assembly, automated test, and existing PCB footprints are more important than custom semiconductor packaging. The LM2901M cannot physically replace the die because its package differs. For applications sensitive to threshold error or timing, evaluate the 7000 uV maximum input offset voltage and 1300 ns response time against the system budget. Also consider that the maximum supply current is 2 mA and that open-collector outputs require carefully selected pull-up resistors. Because no equivalent offered specifically in the same wafer-sale form was identified, a production substitution requires direct confirmation of die dimensions, pad layout, electrical behavior, and assembly process.

المقارنة مع البدائل

المعامل هذا المنتج
Brand Texas Instruments
Package Wafer-sale die; no lead
Comparator Channels 4
Comparator Type General-purpose differential comparator
Maximum Input Offset Voltage 7000 uV
Response Time 1300 ns
Maximum Supply Current 2 mA
Operating Temperature Range -40°C to +85°C
Output Type Open collector
Logic Compatibility TTL, MOS, and CMOS
Differential Input Voltage Range ±38 V
Common-Mode Input Range Includes ground

أبرز الفروقات

  • Wafer-sale construction (مقابلLM2901M)
  • Industrial operating range (مقابلLM2901M)
  • Defined low-level sensing performance (مقابلGeneric comparator alternatives)

ملاحظات التصميم

Do not treat LM2901MWA as a board-mount SOIC or DIP device. It is supplied as a wafer-sale die with no lead, so conventional PCB pin assignments cannot be used. Obtain the manufacturer’s die drawing, bond-pad map, wafer orientation, and die dimensions before laying out a package or assembly fixture. Verify marking and traceability requirements as part of the incoming inspection plan.

The open-collector output requires an external pull-up resistor. Select that resistor using the receiving logic’s voltage, the comparator’s permitted output current, and the required switching speed. Too small a resistance increases sink current and dissipation, while too large a resistance slows edge transitions and increases susceptibility to leakage or noise coupling. Confirm the final value against the LM2901 output-current and saturation-voltage limits.

Keep comparator input traces short, route them away from switching nodes, and use guarded grounding where practical. Add input-series resistance or RC filtering when sensing noisy or high-impedance sources. The 7000 uV maximum input offset voltage is only one contributor to threshold error; divider tolerance, reference accuracy, input bias current, noise, and propagation delay must also be included in the error budget.

The maximum supply current is 2 mA, but total power dissipation also depends on the supply voltage, load on the open-collector outputs, and the assembled package thermal resistance. In a custom encapsulation, evaluate the actual die-to-ambient path rather than applying an assumed package rating. Use the worst-case supply and output states to establish the thermal design for the completed assembly.

Plan the die-attach process around thermal cycling, interconnect stress, cleanliness, and inspection requirements. Establish how the die orientation will be identified after mounting, how bond wires will be routed, and how electrical test access will be provided. A custom package should also define the maximum storage and soldering conditions so later qualification can reproduce the production assembly.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The LM2901MWA is an industrial-temperature wafer-sale die. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified for this exact ordering code.

تم التحقق من البيانات في: 2026-11-15 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

lm2901m datasheet lm2901m national semiconductor LM2901MWA datasheet LM2901MWA pinout LM2901MWA datasheet pdf LM2901MWA equivalent LM2901MWA replacement LM2901MWA wafer sale LM2901MWA open collector LM2901MWA Texas Instruments LM2901MWA price LM2901MWA stock LM2901MWA vs LM2901M LM2901MWA industrial comparator

المكونات والمصطلحات ذات الصلة

Texas Instruments LM2901MWA LM2901 LM2901M LM2904PWR LM2901EP LM239 LM339 LM393B TL331B TLV339IPW quad differential analog comparator analog comparator comparator IC open-collector output input offset voltage response time common-mode input voltage range differential input voltage industrial temperature grade wafer-sale die no-lead die TTL MOS logic CMOS battery monitoring level detection low-level sensing window comparator
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر