LM2901MWA Quad Open-Collector Comparator | Texas Instruments
MPN: LM2901MWA ✓ فعالLM2901MWA جائزہ
An analog comparator is an integrated circuit that compares two input voltages and produces a logic-level indication of their relative relationship. The LM2901 belongs to the comparator hierarchy within analog signal conditioning and power-management electronics. Its four independent channels make it suitable when several sensing or threshold decisions must be performed in one package. The common-mode input range includes ground, while differential input voltage can reach the maximum-rated supply voltage of ±38 V.
The principal features support robust threshold detection and low-level sensing. Open-collector outputs allow the output state to be established with an external pull-up resistor, which provides flexibility for interfacing to mixed logic families and for wired-AND arrangements. The 7000 uV maximum offset specification defines the worst-case input-voltage difference that can affect switching behavior, while the 1300 ns response time establishes the nominal propagation performance of the comparator.
Each of the four comparator channels is independent, allowing separate sensing tasks within a single die. The industrial temperature rating supports equipment operating across a broad ambient range, and the 2 mA maximum supply current suits low-power signal-conditioning systems. The LM2901 family is commonly used for level detection, low-level sensing, and memory-related control functions, where a voltage threshold must be translated into a digital state.
Typical uses include industrial sensor interfaces, overvoltage and undervoltage detection, battery threshold monitoring, window comparators, and control logic for power systems. Because the output is open collector, the designer can select the pull-up voltage and resistor to match the receiving logic rather than relying on a fixed active-high or active-low output arrangement.
LM2901MWA is supplied as an unpackaged die rather than a conventional leaded or surface-mount package. Board-level implementation therefore requires wafer handling, die attachment, bonding, encapsulation, and qualification of the assembled product. Its absence from the package library and the lack of a public package pin numbering are important constraints when planning assembly or comparing it with packaged LM2901 devices.
This page combines the LM2901MWA ordering characteristics, functional limits, comparator specifications, interface considerations, and procurement guidance with a separate evaluation of true drop-in alternatives. Because the target is a wafer-sale die, only an equivalent offered in the same physical form can qualify as a drop-in replacement; standard SOIC or DIP implementations are electrically related but are not interchangeable on a PCB.
کے لیے ڈراپ اِن متبادل LM2901MWA — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںLM2901MWA زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Comparator Type | Differential analog comparator |
| Number of Comparator Channels | 4 channels |
| Maximum Input Offset Voltage | 7000 uV |
| Response Time | 1300 ns |
| آپریٹنگ درجہ حرارت رینج | -40°C to +85°C |
| Maximum Supply Current | 2 mA |
| Maximum Negative Supply Voltage Limit | 0 V |
| Differential Input Voltage Range | ±38 V |
| Common-Mode Input Range | Includes ground |
| آؤٹ پٹ کی قسم | Open collector |
| Logic Compatibility | TTL, MOS, and CMOS |
| Application Category | General-purpose comparator |
| Temperature Grade | Industrial |
| Terminal Form | No lead |
| Package Code | Die |
| Package Shape | Unspecified |
| Order Form | Wafer sale |
| Mounting Method | Unpackaged die assembly |
LM2901MWA unspecified پن کنفیگریشن گائیڈ
LM2901MWA (unspecified پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LM2901MWA.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
LM2901MWA کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Threshold Detection, Battery Voltage Monitoring, Overvoltage and Undervoltage Protection, Window and Limit Comparison, Control Logic and Memory Interface, Custom Multi-Channel Analog Front End.
Industrial Sensor Threshold Detection
The Texas Instruments LM2901MWA fits industrial sensor threshold detection because each of its four channels can compare a conditioned sensor voltage against a reference level. The industrial temperature range of -40°C to +85°C supports equipment operating across a broad ambient range, while the 7000 uV maximum input offset voltage defines the threshold uncertainty that must be included in system calibration. Place the unused channels in a defined state according to the datasheet. Because LM2901MWA is supplied as an unpackaged die, the sensing assembly must use an established die-attachment and bonding process rather than a standard PCB footprint.
تجویز کردہ
Battery Voltage Monitoring
LM2901MWA can implement battery voltage monitoring by comparing a divided battery voltage against precision thresholds and generating open-collector status signals. Its maximum supply current of 2 mA is useful in low-power systems, while the common-mode input range includes ground supports sensing near the lower end of a single-supply range. Four independent channels can monitor separate voltage rails or provide early-warning thresholds. The 1300 ns response time is normally much faster than required for battery supervision, allowing margin for filtering and debounce. A packaged implementation may be preferable when the product uses a conventional surface-mount assembly flow.
تجویز کردہ
Overvoltage and Undervoltage Protection
The four comparator channels in LM2901MWA can supervise positive and negative rails for overvoltage and undervoltage conditions. Its differential input-voltage capability extends to ±38 V, and the open-collector output allows a supervisor signal to be pulled up to the voltage required by the system controller. Designers should add resistor-divider scaling, input filtering, and hysteresis to prevent repeated switching when noise moves the monitored voltage across a threshold. The 7000 uV maximum offset contribution must be considered alongside divider tolerance and reference accuracy. For new PCB designs, a packaged comparator may reduce assembly complexity while retaining the same general LM2901 function.
تجویز کردہ
Window and Limit Comparison
LM2901MWA is suitable for window-comparison circuits where an input must remain between an upper and lower limit. Two channels can establish opposite threshold polarities, while the remaining channels can monitor other rails or provide redundant decisions. Its 1300 ns response time supports fast event detection, and the open-collector outputs can drive TTL, MOS, or CMOS systems using an appropriate pull-up network. Include hysteresis and input filtering in the analog path to avoid chatter from noise. The wafer-sale format requires an assembly method capable of die bonding and encapsulation, so packaged LM2901 implementations remain more convenient where existing surface-mount infrastructure is available.
تجویز کردہ
Control Logic and Memory Interface
The LM2901MWA family is intended for level detection, low-level sensing, and memory-related control functions, making its four open-collector channels appropriate for simple decision logic. Each channel compares two external analog signals and produces a logic indication through a pulled-up output. The 2 mA maximum supply current supports low-power operation, while the -40°C to +85°C rating supports industrial equipment. Logic designers should account for the 7000 uV maximum input offset and 1300 ns response time when setting thresholds and sequencing. Because LM2901MWA is an unpackaged die, its use is most appropriate when the product already includes a controlled semiconductor assembly flow.
تجویز کردہ
Custom Multi-Channel Analog Front End
LM2901MWA can serve as the comparison element in a custom multi-channel analog front end when four threshold decisions must share one die. The open-collector outputs provide a common digital interface style, and the ability to choose an external pull-up voltage allows the comparator section to coexist with TTL, MOS, or CMOS logic. Account for channel-to-channel behavior, input bias effects, and the 7000 uV maximum offset during analog calibration. The 1300 ns response time is suitable for many sensor and control paths but should be checked against system timing. For volume production without bare-die capability, a packaged LM2901 or another compatible quad comparator is typically the lower-risk manufacturing choice.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا LM2901MWA — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Brand | Texas Instruments |
| Package | Wafer-sale die; no lead |
| Comparator Channels | 4 |
| Comparator Type | General-purpose differential comparator |
| Maximum Input Offset Voltage | 7000 uV |
| Response Time | 1300 ns |
| Maximum Supply Current | 2 mA |
| Operating Temperature Range | -40°C to +85°C |
| Output Type | Open collector |
| Logic Compatibility | TTL, MOS, and CMOS |
| Differential Input Voltage Range | ±38 V |
| Common-Mode Input Range | Includes ground |
اہم امتیازی خصوصیات
- Wafer-sale construction (بمقابلہLM2901M)
- Industrial operating range (بمقابلہLM2901M)
- Defined low-level sensing performance (بمقابلہGeneric comparator alternatives)
ڈیزائن نوٹس
Do not treat LM2901MWA as a board-mount SOIC or DIP device. It is supplied as a wafer-sale die with no lead, so conventional PCB pin assignments cannot be used. Obtain the manufacturer’s die drawing, bond-pad map, wafer orientation, and die dimensions before laying out a package or assembly fixture. Verify marking and traceability requirements as part of the incoming inspection plan.
The open-collector output requires an external pull-up resistor. Select that resistor using the receiving logic’s voltage, the comparator’s permitted output current, and the required switching speed. Too small a resistance increases sink current and dissipation, while too large a resistance slows edge transitions and increases susceptibility to leakage or noise coupling. Confirm the final value against the LM2901 output-current and saturation-voltage limits.
Keep comparator input traces short, route them away from switching nodes, and use guarded grounding where practical. Add input-series resistance or RC filtering when sensing noisy or high-impedance sources. The 7000 uV maximum input offset voltage is only one contributor to threshold error; divider tolerance, reference accuracy, input bias current, noise, and propagation delay must also be included in the error budget.
The maximum supply current is 2 mA, but total power dissipation also depends on the supply voltage, load on the open-collector outputs, and the assembled package thermal resistance. In a custom encapsulation, evaluate the actual die-to-ambient path rather than applying an assumed package rating. Use the worst-case supply and output states to establish the thermal design for the completed assembly.
Plan the die-attach process around thermal cycling, interconnect stress, cleanliness, and inspection requirements. Establish how the die orientation will be identified after mounting, how bond wires will be routed, and how electrical test access will be provided. A custom package should also define the maximum storage and soldering conditions so later qualification can reproduce the production assembly.
تعمیل کی معلومات
The LM2901MWA is an industrial-temperature wafer-sale die. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified for this exact ordering code.