Diodes Incorporated

LM2902AS14-13 - Quad 36V Op Amp | Diodes Incorporated

MPN: LM2902AS14-13 ✓ نشط
3 V to 36 V Vdss 375 uA typical Id 14-SO Package
الحد الأدنى للطلب: 1 |

LM2902AS14-13 نظرة عامة

Diodes Incorporated LM2902AS14-13 is a standard general-purpose quad operational amplifier with four amplifier circuits, a 3 V to 36 V supply range, 1.3 MHz gain-bandwidth product, 100 dB open-loop gain, and 375 uA typical quiescent current. The device is supplied in a 14-pin surface-mount SO package.

An operational amplifier, or op amp, is a high-gain analog signal-conditioning component used to amplify voltage differences, buffer sensors, and drive external circuits. The LM2902 belongs to the quad operational amplifier hierarchy, combining four amplifiers in one package. It is intended for general-purpose industrial and instrumentation applications operating from single or dual supplies.

The principal features of the LM2902AS14-13 include a wide 3 V minimum supply, 36 V maximum supply, 1 mV maximum input offset voltage, 1.3 MHz gain-bandwidth product, and 100 dB open-loop gain. Its 375 uA typical quiescent current supports low-power signal processing, while the 14-SO package simplifies assembly on conventional surface-mount PCB layouts.

The four amplifier sections provide common functions such as non-inverting and inverting gain, voltage followers, comparators, transducers, and instrumentation interfaces. Because all four sections are integrated in one package, a complete analog signal-conditioning channel can be implemented without using four separate single amplifiers. PCB designers should preserve input/output symmetry and route high-impedance input signals away from switching nodes and supply-current paths.

Typical applications include industrial sensor conditioning, transducer amplification, current-loop interfacing, audio preamplification, instrumentation amplifiers, active filters, and general low-frequency signal processing. The 3 V to 36 V operating range permits operation from conventional 5 V, 12 V, and 24 V supply systems, subject to the maximum total supply and input common-mode constraints.

When designing a new circuit, check the input common-mode range, output swing, slew rate, and stability requirements at the intended operating frequency. Add supply-bypass capacitors close to the device and avoid placing sensitive input traces beside digital switching paths. The SO-14 footprint requires confirmation against the current PCB footprint before substitution.

This product page combines operating limits, application guidance, package information, drop-in comparison options, and practical PCB considerations. It is intended to help engineers evaluate the LM2902AS14-13 for new designs and legacy repairs without treating every similarly rated amplifier as a functional substitute.

بدائل مباشرة لـ LM2902AS14-13 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع LM2902AS14-13 (نفس عامل الشكل والبصمة) — يختلف في Gain-Bandwidth Product, Maximum Supply Voltage, Number of Amplifier Channels, Output Type, Package.

onsemi
Gain-Bandwidth Product: 1 MHz
Maximum Supply Voltage: 32 V
Number of Amplifier Channels: 4 channels
قارن مع LM2902AS14-13 →
Texas Instruments
Maximum Supply Voltage: 26 V
Number of Amplifier Channels: 4
Output Type: Push-pull
قارن مع LM2902AS14-13 →

LM2902AS-13

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 14-SO
Supply range, gain-bandwidth product, and quiescent current remain 36 V, 1.3 MHz, and 375 uA respectively; ordering suffix differs by 0% on all three cited ratings

📋 بديل مرجعي (غير موجود في الكتالوج)

LM2902AS-13/TA

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 14-SO
Supply range, gain-bandwidth product, and quiescent current remain 36 V, 1.3 MHz, and 375 uA respectively; ordering and shipment suffix differs

📋 بديل مرجعي (غير موجود في الكتالوج)

LM2902AS14-13/TA

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 14-SO
Supply range, gain-bandwidth product, and quiescent current remain 36 V, 1.3 MHz, and 375 uA respectively; ordering and shipment suffix differs

📋 بديل مرجعي (غير موجود في الكتالوج)

LM2902DR

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Texas Instruments
📦 14-SO
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2902DG

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
onsemi
📦 14-SO
Quad operational amplifier · 4 channels · General purpose · 1 MHz · 0.6 V/µs · 3 V · 32 V · True differential inputs

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2902AS14-13 الحدود القصوى والخصائص الكهربائية

Amplifier Type General-purpose operational amplifier
Number of Amplifier Circuits 4 circuits
Supply Voltage Range 3 V to 36 V
Gain-Bandwidth Product 1.3 MHz
Open-Loop Gain 100 dB
Input Offset Voltage 1 mV maximum
تيار السكون 375 uA typical
نطاق درجة حرارة التشغيل -40 °C to +125 °C
نوع الخرج Voltage
العلبة 14-SO
نوع التركيب Surface mount
Product Status Active
حالة RoHS Compliant
Moisture Sensitivity Level MSL 3
Manufacturer Diodes Incorporated
Product Classification Standard general-purpose amplifier

دليل تكوين أطراف LM2902AS14-13 14-so

تكوين الأطراف لـ LM2902AS14-13 (حزمة 14-so). يتميز جهاز الطاقة هذا بأطراف البوابة والمصرف والمصدر. بالنسبة للحزم غير المستقطبة، راجع ورقة بيانات الشركة المصنعة لمعرفة الاتجاه الدقيق للطرف 1 وتفاصيل البصمة. تشمل التطبيقات الشائعة تصميم مصادر الطاقة وتشغيل المحركات وتبديل الأحمال.

مخطط توزيع أطراف حزمة 14-so لـ LM2902AS14-13

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LM2902AS14-13.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

LM2902AS14-13 مناسب لـ 6 التطبيقs: Industrial Sensor Signal Conditioning, Transducer and Bridge Excitation Interfaces, Active Audio Preamplification, Current-Loop Instrumentation, Power-Supply Control and Monitoring, Active Filters and Low-Frequency Equalization.

🏭

Industrial Sensor Signal Conditioning

The LM2902AS14-13 suits industrial sensor-conditioning circuits requiring amplification and buffering within a 3 V to 36 V supply environment. Its four amplifier sections can implement a non-inverting front end, an inverting stage, a low-pass filter, and an output buffer without using four separate packages. The 1.3 MHz gain-bandwidth product supports low-frequency process signals, while 375 uA typical quiescent current helps control standby demand. Use the -40 °C to +125 °C operating range as the initial environmental screen, then verify input common-mode range, output swing, and sensor-specific precision requirements against the datasheet.

⚡

Transducer and Bridge Excitation Interfaces

The LM2902AS14-13 can form the analog interface around resistive transducers, strain-gauge bridges, and other slowly varying sensors. Two sections may amplify differential or referenced sensor outputs, while the remaining channels provide active filtering and output isolation. The 36 V maximum supply permits compatibility with industrial 24 V systems, but the common-mode voltage of the selected sensor output must remain inside the amplifier's allowable input range. Check the 1 mV maximum input offset specification against the smallest signal of interest and calibrate the downstream conversion stage when precision dominates.

🎧

Active Audio Preamplification

The LM2902AS14-13 is appropriate for low-frequency audio preamplifier and mixer circuits that need multiple gain stages in one 14-SO package. Its 1.3 MHz gain-bandwidth product provides ample bandwidth for audio-band signals, and the 3 V to 36 V supply range covers portable, 12 V, and 24 V implementations. Sections can be arranged as non-inverting microphone preamps, inverting mixers, and active volume-control stages. The 375 uA typical quiescent current is useful in battery-oriented designs, although headphone or line-output current capability must be checked with external buffering when the load requires more drive.

📟

Current-Loop Instrumentation

The LM2902AS14-13 is a practical choice for 4 mA to 20 mA current-loop receiver interfaces because four amplifiers support input filtering, gain, active summation, and output buffering. A typical implementation places a precision sense resistor at the loop input, amplifies the resulting voltage, filters high-frequency noise, and drives a measurement or control signal. The wide 3 V to 36 V supply range helps accommodate 24 V industrial loop systems. Accuracy depends on resistor matching and the amplifier's input offset, so use suitable resistor networks and verify common-mode and output-swing limits at the actual loop voltage.

🔋

Power-Supply Control and Monitoring

The LM2902AS14-13 can implement low-bandwidth power-supply feedback, soft-start control, or analog monitoring functions within a 3 V to 36 V system. Because it is a general-purpose amplifier rather than a dedicated regulator, its input, output, and common-mode limits must be evaluated for the exact control topology. Four integrated channels allow a design to combine error amplification, output filtering, and auxiliary monitoring. The 1 mV maximum input offset can be important in high-gain feedback paths, and the 1.3 MHz bandwidth should be low enough to avoid amplifying switching ripple without creating an unstable loop.

📶

Active Filters and Low-Frequency Equalization

The LM2902AS14-13 is useful in first-order and second-order active-filter implementations below its 1.3 MHz gain-bandwidth limit. Four amplifier sections allow a signal chain to combine low-pass or notch filtering with gain and buffering. A 36 V maximum supply supports higher-level analog signals in industrial equipment, while the 375 uA typical quiescent current limits the static demand of portable instrumentation. Component tolerances strongly influence filter accuracy, so select suitable resistor and capacitor values, place input/output protection appropriately, and verify the closed-loop stability and output-swing behavior across the intended frequency range.

ملخص المنتجات الموصى بها

LM2902AS14-13 Diodes Incorporated يُستخدم في: Industrial Sensor Signal Conditioning, Transducer and Bridge Excitation Interfaces, Active Audio Preamplification, Current-Loop Instrumentation, Power-Supply Control and Monitoring, Active Filters and Low-Frequency Equalization LM324 Related quad operational-amplifier family يُستخدم في: Industrial Sensor Signal Conditioning, Transducer and Bridge Excitation Interfaces, Active Audio Preamplification, Current-Loop Instrumentation, Power-Supply Control and Monitoring, Active Filters and Low-Frequency Equalization
What is the LM2902AS14-13?
The LM2902AS14-13 is a four-circuit general-purpose operational amplifier from Diodes Incorporated in a 14-pin surface-mount SO package. According to the Diodes Incorporated datasheet, it operates from 3 V to 36 V and provides a 1.3 MHz gain-bandwidth product, 100 dB open-loop gain, and 375 uA typical quiescent current. It is suitable for industrial signal conditioning, buffering, gain control, and general analog-processing circuits.
What are the key specifications of LM2902AS14-13 that engineers should know?
The LM2902AS14-13 combines four operational amplifiers in a 14-SO surface-mount package. Key electrical specifications include a 3 V to 36 V supply range, 1.3 MHz gain-bandwidth product, 100 dB open-loop gain, 1 mV maximum input offset voltage, and 375 uA typical quiescent current. The manufacturer specifies an operating temperature range from -40 °C to +125 °C.
What is the operating voltage range of LM2902AS14-13?
The LM2902AS14-13 operates from 3 V to 36 V. According to the Diodes Incorporated datasheet, this range supports conventional low-voltage, split-supply, and industrial supply arrangements. The actual usable range must also remain compatible with the amplifier's input common-mode and output-swing requirements, particularly when operating from a single 3 V supply.
Where can I download the LM2902AS14-13 datasheet PDF?
The LM2902AS14-13 datasheet PDF is available from the Diodes Incorporated documentation mirror linked on this page. It describes the quad amplifier, electrical characteristics, package information, and application details. Use the manufacturer's pin-description table and the SO-14 footprint drawing when assigning PCB tracks or designing a replacement.
Where can I find the LM2902AS14-13 pinout?
Use the pin-description table in the Diodes Incorporated LM2902AS14-13 datasheet to identify each SO-14 lead and confirm the physical orientation. The device is a standard 14-pin quad operational amplifier, but engineers should still verify the pin numbering against the package drawing before assembling a board or adapting an existing footprint.
What can replace the LM2902AS14-13?
The LM2902AS14-13 can be replaced only by a quad operational amplifier with a matching SO-14 footprint, pin-compatible inputs and outputs, acceptable supply voltage, and adequate common-mode and output-swing performance. Several members of the LM2902 family use the same SO-14 arrangement, but suffix, temperature grade, and shipment code must be checked before treating any candidate as a direct replacement.
Is LM2902AS14-13 the same as LM2902AS-13?
The LM2902AS14-13 and LM2902AS-13 are closely related orderable forms of the Diodes Incorporated LM2902 family, but the exact suffix must be checked against the required package, temperature grade, and shipment format. According to the manufacturer documentation, both belong to the 14-SO quad operational-amplifier family. Confirm the manufacturer product specification and footprint before substitution.
Where can I buy LM2902AS14-13 online?
Use the Request a Quote form on this page to request LM2902AS14-13 availability, commercial terms, and a current order response from XAIPART. The part is a 14-SO quad operational amplifier rated for a 3 V to 36 V supply range and an operating temperature range of -40 °C to +125 °C.
What is the price of LM2902AS14-13?
Use the Request a Quote form on this page for the current commercial quotation for LM2902AS14-13. The structured pricing associated with this part reflects a minimum-order quantity of 2,500 units. For prototype evaluation, ask whether a smaller quantity can be supplied and which authorized shipment format applies.
What is the lead time for LM2902AS14-13?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. The LM2902AS14-13 is listed as an active product, but production timing can change with order volume, package availability, and manufacturing conditions. Include the required quantity, target date, and shipment format in the request.
Is LM2902AS14-13 in stock?
The LM2902AS14-13 is listed as active, while current inventory should be confirmed through the Request a Quote form on this page. Provide the required quantity and shipment destination so XAIPART can return an accurate availability response. The device is supplied in a 14-SO surface-mount package for standard PCB assembly.
LM2902AS14-13 vs LM2902DR - which is better for industrial signal conditioning?
Choose the LM2902AS14-13 when procurement specifically requires the Diodes Incorporated 14-SO ordering code and its documented operating range of -40 °C to +125 °C. LM2902DR may suit the same general quad-amplifier role when its exact manufacturer rating and footprint are acceptable. Compare input offset, common-mode range, output swing, slew rate, noise, and qualification requirements before deciding.
When should I choose LM2902AS14-13 over another quad op amp?
Choose the LM2902AS14-13 when you need a straightforward, general-purpose quad amplifier with a 3 V to 36 V supply range and an established 14-SO footprint. It is appropriate for moderate-bandwidth sensor, buffering, and gain applications. Select a lower-noise or faster amplifier when precision, bandwidth, or output-drive requirements exceed the LM2902's capabilities.
Is LM2902AS14-13 suitable for industrial sensor conditioning?
The LM2902AS14-13 is suitable for many industrial sensor-conditioning tasks operating within -40 °C to +125 °C. Its four amplifier sections can implement signal amplification, inversion, active filtering, and buffering, while the 3 V to 36 V supply range supports 5 V, 12 V, and 24 V systems. Confirm the sensor output range and the amplifier's common-mode limits before selection.
What are the best drop-in replacement choices for LM2902AS14-13?
The closest drop-in choices are other orderable LM2902-family devices supplied in the same 14-SO arrangement, including LM2902AS-13, LM2902AS-13/TA, LM2902AS14-13/TA, LM2902DR, and LM2902DG. Each candidate must be checked for suffix-specific electrical limits and package orientation. The alternatives listed here retain the quad-amplifier architecture and SO-14 land pattern.

بيانات مرجعية هندسية لـ LM2902AS14-13 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the LM2902AS14-13 when you need a straightforward general-purpose quad amplifier in a 14-SO surface-mount package, especially for industrial sensor conditioning, active filtering, audio preamplification, or current-loop interfaces. Its 3 V to 36 V supply range supports several conventional industrial supply systems, and the -40 °C to +125 °C rating covers extended-temperature equipment. Select a precision or high-speed amplifier instead when input offset, noise, bandwidth, slew rate, or output-drive requirements exceed this device's capabilities. The listed LM2902-family alternatives are appropriate for footprint-compatible maintenance and equivalent-family sourcing, but their suffix-specific temperature, shipment, and qualification details must be checked. For legacy repairs, verify the existing PCB footprint, pin orientation, supply conditions, and required output current before finalizing a substitution.

المقارنة مع البدائل

المعامل هذا المنتج LM2902AS-13 LM2902AS-13/TA LM2902AS14-13/TA LM2902DR LM2902DG
Brand Diodes Incorporated Diodes Incorporated Diodes Incorporated Diodes Incorporated Diodes Incorporated Diodes Incorporated
Package 14-SO 14-SO 14-SO 14-SO 14-SO 14-SO
Amplifier Circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Supply Voltage Range 3 V to 36 V 3 V to 36 V 3 V to 36 V 3 V to 36 V 3 V to 36 V 3 V to 36 V
Gain-Bandwidth Product 1.3 MHz 1.3 MHz 1.3 MHz 1.3 MHz 1.3 MHz 1.3 MHz
Open-Loop Gain 100 dB 100 dB 100 dB 100 dB 100 dB 100 dB
Input Offset Voltage 1 mV maximum 1 mV maximum 1 mV maximum 1 mV maximum 1 mV maximum 1 mV maximum
Quiescent Current 375 uA typical 375 uA typical 375 uA typical 375 uA typical 375 uA typical 375 uA typical
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

أبرز الفروقات

  • Wide supply range for general-purpose analog designs (مقابلLM2902AS-13)
  • Four general-purpose amplifiers in a 14-SO package (مقابلLM2902AS-13/TA)
  • Direct same-family footprint option for repairs (مقابلLM2902DR)

ملاحظات التصميم

Place the input and output bypass capacitors close to their corresponding device pins and keep the return-current path short. For the four amplifier sections, preserve similar routing geometry where channel matching matters. Connect the exposed analog ground references consistently according to the manufacturer pinout and do not route switching-current paths beneath sensitive input or feedback traces.

Do not treat the 3 V to 36 V supply rating as permission to operate the input and output arbitrarily close to the rails. Verify the input common-mode range and output swing at the selected load. When using the LM2902AS14-13 as a comparator, account for its intended open-loop behavior and output-state limitations rather than assuming a dedicated comparator's specifications.

Keep high-impedance inputs and feedback components away from switching nodes, inductors, and high-current return paths. Use a compact grounding strategy around each amplifier section and avoid shared narrow copper necks between input and output. In instrumentation circuits, separate the sense-resistor return from digital and power-return currents to reduce ground-induced error.

Calculate the required supply headroom before selecting the operating voltage. The four integrated amplifiers share the device supply and can collectively consume more current than the 375 uA quiescent-current figure suggests when driving loads. Add local supply decoupling and confirm total output-current demand against the electrical characteristics for every amplifier section operating simultaneously.

معلومات الامتثال

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

RoHS compliance and MSL 3 are identified for the LM2902AS14-13. AEC-Q100 qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status require confirmation from the applicable manufacturer documentation.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

LM2902AS14-13 datasheet LM2902AS14-13 pinout LM2902AS14-13 datasheet pdf Diodes Incorporated LM2902AS14-13 LM2902AS14-13 equivalent LM2902AS14-13 replacement LM2902AS14-13 vs LM2902DR LM2902AS14-13 SO-14 footprint LM2902AS14-13 application circuit LM2902AS14-13 price LM2902AS14-13 stock LM2902AS14-13 36V quad op amp LM2902AS14-13 sensor conditioning

المكونات والمصطلحات ذات الصلة

Diodes Incorporated LM2902AS14-13 LM2902AS-13 LM2902AS-13/TA LM2902AS14-13/TA LM2902DR LM2902DG quad operational amplifier operational amplifier op amp analog signal conditioning voltage amplifier gain-bandwidth product open-loop gain input offset voltage quiescent current SO-14 surface mount industrial sensor conditioning active filter current-loop interface audio preamplifier RoHS MSL 3
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر