LM2902AS14-13 - Quad 36V Op Amp | Diodes Incorporated
MPN: LM2902AS14-13 ✓ AktifLM2902AS14-13 Ringkasan
An operational amplifier, or op amp, is a high-gain analog signal-conditioning component used to amplify voltage differences, buffer sensors, and drive external circuits. The LM2902 belongs to the quad operational amplifier hierarchy, combining four amplifiers in one package. It is intended for general-purpose industrial and instrumentation applications operating from single or dual supplies.
The principal features of the LM2902AS14-13 include a wide 3 V minimum supply, 36 V maximum supply, 1 mV maximum input offset voltage, 1.3 MHz gain-bandwidth product, and 100 dB open-loop gain. Its 375 uA typical quiescent current supports low-power signal processing, while the 14-SO package simplifies assembly on conventional surface-mount PCB layouts.
The four amplifier sections provide common functions such as non-inverting and inverting gain, voltage followers, comparators, transducers, and instrumentation interfaces. Because all four sections are integrated in one package, a complete analog signal-conditioning channel can be implemented without using four separate single amplifiers. PCB designers should preserve input/output symmetry and route high-impedance input signals away from switching nodes and supply-current paths.
Typical applications include industrial sensor conditioning, transducer amplification, current-loop interfacing, audio preamplification, instrumentation amplifiers, active filters, and general low-frequency signal processing. The 3 V to 36 V operating range permits operation from conventional 5 V, 12 V, and 24 V supply systems, subject to the maximum total supply and input common-mode constraints.
When designing a new circuit, check the input common-mode range, output swing, slew rate, and stability requirements at the intended operating frequency. Add supply-bypass capacitors close to the device and avoid placing sensitive input traces beside digital switching paths. The SO-14 footprint requires confirmation against the current PCB footprint before substitution.
This product page combines operating limits, application guidance, package information, drop-in comparison options, and practical PCB considerations. It is intended to help engineers evaluate the LM2902AS14-13 for new designs and legacy repairs without treating every similarly rated amplifier as a functional substitute.
Pilihan pengganti yang segera untuk LM2902AS14-13 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera LM2902AS14-13 (sama faktor bentuk dan kaki) — berbeza dalam Gain-Bandwidth Product, Maximum Supply Voltage, Number of Amplifier Channels, Output Type, Package.
LM2902AS-13
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LM2902AS-13/TA
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LM2902AS14-13/TA
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LM2902DR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →LM2902DG
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →LM2902AS14-13 Penilaian maksimum & Ciri-ciri Elektrik
| Amplifier Type | General-purpose operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| Supply Voltage Range | 3 V to 36 V |
| Gain-Bandwidth Product | 1.3 MHz |
| Open-Loop Gain | 100 dB |
| Input Offset Voltage | 1 mV maximum |
| Arus Dalam Tentera | 375 uA typical |
| Gambaran Suhu Operasi | -40 °C to +125 °C |
| Jenis Output | Voltage |
| Kemasan | 14-SO |
| Jenis Pemasangan | Surface mount |
| Product Status | Active |
| Status RoHS | Compliant |
| Moisture Sensitivity Level | MSL 3 |
| Manufacturer | Diodes Incorporated |
| Product Classification | Standard general-purpose amplifier |
Panduan Konfigurasi Pin LM2902AS14-13 14-so
Konfigurasi pin untuk LM2902AS14-13 (14-so pakai). Peranti kuasa ini mempunyai terminal kawat, buang, dan sumber. Untuk pakai non-polarized, rujuk dokumen pengeluar untuk orientasi pin 1 tepat dan perincian kebentuk.
Tiada data garisan pin yang diperoleh untuk LM2902AS14-13.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
LM2902AS14-13 patut untuk 6 aplikasis: Industrial Sensor Signal Conditioning, Transducer and Bridge Excitation Interfaces, Active Audio Preamplification, Current-Loop Instrumentation, Power-Supply Control and Monitoring, Active Filters and Low-Frequency Equalization.
Industrial Sensor Signal Conditioning
The LM2902AS14-13 suits industrial sensor-conditioning circuits requiring amplification and buffering within a 3 V to 36 V supply environment. Its four amplifier sections can implement a non-inverting front end, an inverting stage, a low-pass filter, and an output buffer without using four separate packages. The 1.3 MHz gain-bandwidth product supports low-frequency process signals, while 375 uA typical quiescent current helps control standby demand. Use the -40 °C to +125 °C operating range as the initial environmental screen, then verify input common-mode range, output swing, and sensor-specific precision requirements against the datasheet.
Disebarkan
Transducer and Bridge Excitation Interfaces
The LM2902AS14-13 can form the analog interface around resistive transducers, strain-gauge bridges, and other slowly varying sensors. Two sections may amplify differential or referenced sensor outputs, while the remaining channels provide active filtering and output isolation. The 36 V maximum supply permits compatibility with industrial 24 V systems, but the common-mode voltage of the selected sensor output must remain inside the amplifier's allowable input range. Check the 1 mV maximum input offset specification against the smallest signal of interest and calibrate the downstream conversion stage when precision dominates.
Disebarkan
Active Audio Preamplification
The LM2902AS14-13 is appropriate for low-frequency audio preamplifier and mixer circuits that need multiple gain stages in one 14-SO package. Its 1.3 MHz gain-bandwidth product provides ample bandwidth for audio-band signals, and the 3 V to 36 V supply range covers portable, 12 V, and 24 V implementations. Sections can be arranged as non-inverting microphone preamps, inverting mixers, and active volume-control stages. The 375 uA typical quiescent current is useful in battery-oriented designs, although headphone or line-output current capability must be checked with external buffering when the load requires more drive.
Disebarkan
Current-Loop Instrumentation
The LM2902AS14-13 is a practical choice for 4 mA to 20 mA current-loop receiver interfaces because four amplifiers support input filtering, gain, active summation, and output buffering. A typical implementation places a precision sense resistor at the loop input, amplifies the resulting voltage, filters high-frequency noise, and drives a measurement or control signal. The wide 3 V to 36 V supply range helps accommodate 24 V industrial loop systems. Accuracy depends on resistor matching and the amplifier's input offset, so use suitable resistor networks and verify common-mode and output-swing limits at the actual loop voltage.
Disebarkan
Power-Supply Control and Monitoring
The LM2902AS14-13 can implement low-bandwidth power-supply feedback, soft-start control, or analog monitoring functions within a 3 V to 36 V system. Because it is a general-purpose amplifier rather than a dedicated regulator, its input, output, and common-mode limits must be evaluated for the exact control topology. Four integrated channels allow a design to combine error amplification, output filtering, and auxiliary monitoring. The 1 mV maximum input offset can be important in high-gain feedback paths, and the 1.3 MHz bandwidth should be low enough to avoid amplifying switching ripple without creating an unstable loop.
Disebarkan
Active Filters and Low-Frequency Equalization
The LM2902AS14-13 is useful in first-order and second-order active-filter implementations below its 1.3 MHz gain-bandwidth limit. Four amplifier sections allow a signal chain to combine low-pass or notch filtering with gain and buffering. A 36 V maximum supply supports higher-level analog signals in industrial equipment, while the 375 uA typical quiescent current limits the static demand of portable instrumentation. Component tolerances strongly influence filter accuracy, so select suitable resistor and capacitor values, place input/output protection appropriately, and verify the closed-loop stability and output-swing behavior across the intended frequency range.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk LM2902AS14-13 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | LM2902AS-13 | LM2902AS-13/TA | LM2902AS14-13/TA | LM2902DR | LM2902DG |
|---|---|---|---|---|---|---|
| Brand | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated |
| Package | 14-SO | 14-SO | 14-SO | 14-SO | 14-SO | 14-SO |
| Amplifier Circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Supply Voltage Range | 3 V to 36 V | 3 V to 36 V | 3 V to 36 V | 3 V to 36 V | 3 V to 36 V | 3 V to 36 V |
| Gain-Bandwidth Product | 1.3 MHz | 1.3 MHz | 1.3 MHz | 1.3 MHz | 1.3 MHz | 1.3 MHz |
| Open-Loop Gain | 100 dB | 100 dB | 100 dB | 100 dB | 100 dB | 100 dB |
| Input Offset Voltage | 1 mV maximum | 1 mV maximum | 1 mV maximum | 1 mV maximum | 1 mV maximum | 1 mV maximum |
| Quiescent Current | 375 uA typical | 375 uA typical | 375 uA typical | 375 uA typical | 375 uA typical | 375 uA typical |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Penyeberangsung Jelas
- Wide supply range for general-purpose analog designs (vsLM2902AS-13)
- Four general-purpose amplifiers in a 14-SO package (vsLM2902AS-13/TA)
- Direct same-family footprint option for repairs (vsLM2902DR)
Catatan Desain
Place the input and output bypass capacitors close to their corresponding device pins and keep the return-current path short. For the four amplifier sections, preserve similar routing geometry where channel matching matters. Connect the exposed analog ground references consistently according to the manufacturer pinout and do not route switching-current paths beneath sensitive input or feedback traces.
Do not treat the 3 V to 36 V supply rating as permission to operate the input and output arbitrarily close to the rails. Verify the input common-mode range and output swing at the selected load. When using the LM2902AS14-13 as a comparator, account for its intended open-loop behavior and output-state limitations rather than assuming a dedicated comparator's specifications.
Keep high-impedance inputs and feedback components away from switching nodes, inductors, and high-current return paths. Use a compact grounding strategy around each amplifier section and avoid shared narrow copper necks between input and output. In instrumentation circuits, separate the sense-resistor return from digital and power-return currents to reduce ground-induced error.
Calculate the required supply headroom before selecting the operating voltage. The four integrated amplifiers share the device supply and can collectively consume more current than the 375 uA quiescent-current figure suggests when driving loads. Add local supply decoupling and confirm total output-current demand against the electrical characteristics for every amplifier section operating simultaneously.
Maklumat Kesediaan
RoHS compliance and MSL 3 are identified for the LM2902AS14-13. AEC-Q100 qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status require confirmation from the applicable manufacturer documentation.