LM2902AS14-13 - Quad 36V Op Amp | Diodes Incorporated
部品番号: LM2902AS14-13 ✓ 生産中LM2902AS14-13 概要
An operational amplifier, or op amp, is a high-gain analog signal-conditioning component used to amplify voltage differences, buffer sensors, and drive external circuits. The LM2902 belongs to the quad operational amplifier hierarchy, combining four amplifiers in one package. It is intended for general-purpose industrial and instrumentation applications operating from single or dual supplies.
The principal features of the LM2902AS14-13 include a wide 3 V minimum supply, 36 V maximum supply, 1 mV maximum input offset voltage, 1.3 MHz gain-bandwidth product, and 100 dB open-loop gain. Its 375 uA typical quiescent current supports low-power signal processing, while the 14-SO package simplifies assembly on conventional surface-mount PCB layouts.
The four amplifier sections provide common functions such as non-inverting and inverting gain, voltage followers, comparators, transducers, and instrumentation interfaces. Because all four sections are integrated in one package, a complete analog signal-conditioning channel can be implemented without using four separate single amplifiers. PCB designers should preserve input/output symmetry and route high-impedance input signals away from switching nodes and supply-current paths.
Typical applications include industrial sensor conditioning, transducer amplification, current-loop interfacing, audio preamplification, instrumentation amplifiers, active filters, and general low-frequency signal processing. The 3 V to 36 V operating range permits operation from conventional 5 V, 12 V, and 24 V supply systems, subject to the maximum total supply and input common-mode constraints.
When designing a new circuit, check the input common-mode range, output swing, slew rate, and stability requirements at the intended operating frequency. Add supply-bypass capacitors close to the device and avoid placing sensitive input traces beside digital switching paths. The SO-14 footprint requires confirmation against the current PCB footprint before substitution.
This product page combines operating limits, application guidance, package information, drop-in comparison options, and practical PCB considerations. It is intended to help engineers evaluate the LM2902AS14-13 for new designs and legacy repairs without treating every similarly rated amplifier as a functional substitute.
ドロップイン代替品: LM2902AS14-13 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LM2902AS14-13 (同一形状・フットプリント) — 相違点: Gain-Bandwidth Product, Maximum Supply Voltage, Number of Amplifier Channels, Output Type, Package.
LM2902AS-13
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
LM2902AS-13/TA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
LM2902AS14-13/TA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
LM2902DR
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →LM2902DG
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →LM2902AS14-13 最大定格&電気的特性
| Amplifier Type | General-purpose operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| Supply Voltage Range | 3 V to 36 V |
| Gain-Bandwidth Product | 1.3 MHz |
| Open-Loop Gain | 100 dB |
| Input Offset Voltage | 1 mV maximum |
| 静止電流 | 375 uA typical |
| 動作温度範囲 | -40 °C to +125 °C |
| 出力タイプ | Voltage |
| パッケージ | 14-SO |
| 実装タイプ | Surface mount |
| Product Status | Active |
| RoHS ステータス | Compliant |
| Moisture Sensitivity Level | MSL 3 |
| Manufacturer | Diodes Incorporated |
| Product Classification | Standard general-purpose amplifier |
LM2902AS14-13 14-so ピン配置ガイド
LM2902AS14-13 (14-so パッケージ) のピン配置。 このパワーデバイスは、ゲート、ドレイン、ソース端子を備えています。非極性パッケージの場合、正確なピン1の向きとフットプリントの詳細については、メーカーのデータシートを参照してください。主な用途には、電源設計、モータ駆動、負荷スイッチングがあります。
詳細なピン配置データはありません: LM2902AS14-13.
詳細は データシート をご参照ください。
主な用途
LM2902AS14-13 の用途: 6 件s: Industrial Sensor Signal Conditioning, Transducer and Bridge Excitation Interfaces, Active Audio Preamplification, Current-Loop Instrumentation, Power-Supply Control and Monitoring, Active Filters and Low-Frequency Equalization.
Industrial Sensor Signal Conditioning
The LM2902AS14-13 suits industrial sensor-conditioning circuits requiring amplification and buffering within a 3 V to 36 V supply environment. Its four amplifier sections can implement a non-inverting front end, an inverting stage, a low-pass filter, and an output buffer without using four separate packages. The 1.3 MHz gain-bandwidth product supports low-frequency process signals, while 375 uA typical quiescent current helps control standby demand. Use the -40 °C to +125 °C operating range as the initial environmental screen, then verify input common-mode range, output swing, and sensor-specific precision requirements against the datasheet.
おすすめ
Transducer and Bridge Excitation Interfaces
The LM2902AS14-13 can form the analog interface around resistive transducers, strain-gauge bridges, and other slowly varying sensors. Two sections may amplify differential or referenced sensor outputs, while the remaining channels provide active filtering and output isolation. The 36 V maximum supply permits compatibility with industrial 24 V systems, but the common-mode voltage of the selected sensor output must remain inside the amplifier's allowable input range. Check the 1 mV maximum input offset specification against the smallest signal of interest and calibrate the downstream conversion stage when precision dominates.
おすすめ
Active Audio Preamplification
The LM2902AS14-13 is appropriate for low-frequency audio preamplifier and mixer circuits that need multiple gain stages in one 14-SO package. Its 1.3 MHz gain-bandwidth product provides ample bandwidth for audio-band signals, and the 3 V to 36 V supply range covers portable, 12 V, and 24 V implementations. Sections can be arranged as non-inverting microphone preamps, inverting mixers, and active volume-control stages. The 375 uA typical quiescent current is useful in battery-oriented designs, although headphone or line-output current capability must be checked with external buffering when the load requires more drive.
おすすめ
Current-Loop Instrumentation
The LM2902AS14-13 is a practical choice for 4 mA to 20 mA current-loop receiver interfaces because four amplifiers support input filtering, gain, active summation, and output buffering. A typical implementation places a precision sense resistor at the loop input, amplifies the resulting voltage, filters high-frequency noise, and drives a measurement or control signal. The wide 3 V to 36 V supply range helps accommodate 24 V industrial loop systems. Accuracy depends on resistor matching and the amplifier's input offset, so use suitable resistor networks and verify common-mode and output-swing limits at the actual loop voltage.
おすすめ
Power-Supply Control and Monitoring
The LM2902AS14-13 can implement low-bandwidth power-supply feedback, soft-start control, or analog monitoring functions within a 3 V to 36 V system. Because it is a general-purpose amplifier rather than a dedicated regulator, its input, output, and common-mode limits must be evaluated for the exact control topology. Four integrated channels allow a design to combine error amplification, output filtering, and auxiliary monitoring. The 1 mV maximum input offset can be important in high-gain feedback paths, and the 1.3 MHz bandwidth should be low enough to avoid amplifying switching ripple without creating an unstable loop.
おすすめ
Active Filters and Low-Frequency Equalization
The LM2902AS14-13 is useful in first-order and second-order active-filter implementations below its 1.3 MHz gain-bandwidth limit. Four amplifier sections allow a signal chain to combine low-pass or notch filtering with gain and buffering. A 36 V maximum supply supports higher-level analog signals in industrial equipment, while the 375 uA typical quiescent current limits the static demand of portable instrumentation. Component tolerances strongly influence filter accuracy, so select suitable resistor and capacitor values, place input/output protection appropriately, and verify the closed-loop stability and output-swing behavior across the intended frequency range.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LM2902AS14-13 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LM2902AS-13 | LM2902AS-13/TA | LM2902AS14-13/TA | LM2902DR | LM2902DG |
|---|---|---|---|---|---|---|
| Brand | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated |
| Package | 14-SO | 14-SO | 14-SO | 14-SO | 14-SO | 14-SO |
| Amplifier Circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Supply Voltage Range | 3 V to 36 V | 3 V to 36 V | 3 V to 36 V | 3 V to 36 V | 3 V to 36 V | 3 V to 36 V |
| Gain-Bandwidth Product | 1.3 MHz | 1.3 MHz | 1.3 MHz | 1.3 MHz | 1.3 MHz | 1.3 MHz |
| Open-Loop Gain | 100 dB | 100 dB | 100 dB | 100 dB | 100 dB | 100 dB |
| Input Offset Voltage | 1 mV maximum | 1 mV maximum | 1 mV maximum | 1 mV maximum | 1 mV maximum | 1 mV maximum |
| Quiescent Current | 375 uA typical | 375 uA typical | 375 uA typical | 375 uA typical | 375 uA typical | 375 uA typical |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
主な差別化要因
- Wide supply range for general-purpose analog designs (vs LM2902AS-13)
- Four general-purpose amplifiers in a 14-SO package (vs LM2902AS-13/TA)
- Direct same-family footprint option for repairs (vs LM2902DR)
設計ノート
Place the input and output bypass capacitors close to their corresponding device pins and keep the return-current path short. For the four amplifier sections, preserve similar routing geometry where channel matching matters. Connect the exposed analog ground references consistently according to the manufacturer pinout and do not route switching-current paths beneath sensitive input or feedback traces.
Do not treat the 3 V to 36 V supply rating as permission to operate the input and output arbitrarily close to the rails. Verify the input common-mode range and output swing at the selected load. When using the LM2902AS14-13 as a comparator, account for its intended open-loop behavior and output-state limitations rather than assuming a dedicated comparator's specifications.
Keep high-impedance inputs and feedback components away from switching nodes, inductors, and high-current return paths. Use a compact grounding strategy around each amplifier section and avoid shared narrow copper necks between input and output. In instrumentation circuits, separate the sense-resistor return from digital and power-return currents to reduce ground-induced error.
Calculate the required supply headroom before selecting the operating voltage. The four integrated amplifiers share the device supply and can collectively consume more current than the 375 uA quiescent-current figure suggests when driving loads. Add local supply decoupling and confirm total output-current demand against the electrical characteristics for every amplifier section operating simultaneously.
コンプライアンス情報
RoHS compliance and MSL 3 are identified for the LM2902AS14-13. AEC-Q100 qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status require confirmation from the applicable manufacturer documentation.