Texas Instruments

LM2904VQPWR - Dual 30V 700kHz Op Amp | Texas Instruments

MPN: LM2904VQPWR ✓ نشط
30 V Vdss 8-pin TSSOP (PW) Package
الحد الأدنى للطلب: 1 |

LM2904VQPWR نظرة عامة

The Texas Instruments LM2904VQPWR is a dual, general-purpose operational amplifier designed for operation from a 30 V supply with a 700 kHz gain-bandwidth product. The device contains two independent, high-gain, frequency-compensated amplifiers and is offered in an 8-pin TSSOP (PW) package. Its operating temperature range extends from -40 °C to 125 °C.

An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2904 family sits within the broader hierarchy of operational amplifiers, analog amplifiers, amplifier ICs, and semiconductors. It can operate from either a single supply or split supplies, making it suitable for circuits powered by industrial rails, batteries, or dual bipolar rails.

The two amplifiers can be used independently for separate signal paths or together in differential, filtering, feedback, and gain-control configurations. The 30 V maximum supply rating provides ample headroom for higher-voltage analog systems, while the 700 kHz bandwidth supports general-purpose signal amplification rather than high-speed precision applications. Its wide -40 °C to 125 °C temperature range allows operation across industrial, automotive-adjacent, and extended-temperature equipment when the system qualification requirements are satisfied.

The LM2904VQPWR uses internal frequency compensation to maintain stable operation in common closed-loop configurations without requiring an external compensation network. Because it contains two amplifier sections, it can reduce component count and board area in designs that require two similar analog channels. Each section has independent input, output, supply, and ground connections, allowing normal dual-amplifier layouts.

Typical uses include sensor-signal conditioning, low-frequency active filters, audio preamplification, motor and actuator feedback loops, and general industrial control interfaces. For battery-powered or split-supply equipment, its dual-amplifier organization can support two related analog channels while sharing one package. Engineers should still verify output swing, input common-mode range, load drive, stability, and noise for the intended feedback network.

PCB implementation requires careful decoupling and grounding. Place the supply bypass capacitor close to the positive and negative supply pins, connect the exposed package ground as applicable, and keep feedback resistors close to the relevant amplifier inputs and outputs. Avoid routing high-current return paths through the analog ground reference. Verify the selected operating point against the manufacturer datasheet, especially when output swing approaches the supply rails.

This product page combines the manufacturer ordering information, verified distributor listings, package details, drop-in alternatives, comparison parameters, and practical PCB guidance. It is intended to accelerate component selection while directing critical electrical verification to the Texas Instruments LM2904V datasheet and product documentation.

بدائل مباشرة لـ LM2904VQPWR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع LM2904VQPWR (نفس عامل الشكل والبصمة) — يختلف في Maximum Supply Voltage, Gain-Bandwidth Product, Amplifier Type, Package Type, Operating Temperature Range.

Texas Instruments
Maximum Supply Voltage: 5.5 V
Gain-Bandwidth Product: 1 MHz
Amplifier Type: General-purpose operational amplifier
قارن مع LM2904VQPWR →
Texas Instruments
Maximum Supply Voltage: 26 V
قارن مع LM2904VQPWR →
Texas Instruments
Package Type: TSSOP (PW)
قارن مع LM2904VQPWR →

LM2904PWR

✅ بديل مباشر
Texas Instruments
📦 TSSOP-8 (PW)
2 circuits · Dual general-purpose operational amplifier · 26 V · 700 kHz · 0.7 mA · Independent of supply voltage · Single supply or split supply · Includes ground

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2904VQPWR

✅ بديل مباشر
Texas Instruments
📦 TSSOP-8
Dual general-purpose operational amplifier · 2 channels · 30 V · 700 kHz · -40 °C to 125 °C · Single supply or split supply · 8-pin TSSOP (PW) · TSSOP

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2904VQPWR الحدود القصوى والخصائص الكهربائية

Amplifier Type Dual general-purpose operational amplifier
Number of Channels 2 channels
Maximum Supply Voltage 30 V
Gain-Bandwidth Product 700 kHz
نطاق درجة حرارة التشغيل -40 °C to 125 °C
Supply Configuration Single supply or split supply
العلبة 8-pin TSSOP (PW)
Package Type TSSOP
عدد الأطراف 8 pins
نوع التركيب Surface mount
Amplifier Sections 2 independent, high-gain, frequency-compensated sections

دليل تكوين أطراف LM2904VQPWR tssop

تكوين الأطراف لـ LM2904VQPWR (حزمة tssop). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة tssop لـ LM2904VQPWR

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ LM2904VQPWR.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

LM2904VQPWR مناسب لـ 6 التطبيقs: Industrial Sensor Signal Conditioning, Low-Frequency Active Filtering, Audio Preamplification, Motor and Actuator Feedback Control, Battery-Powered Analog Front End, Test and Measurement Front Panel.

🏭

Industrial Sensor Signal Conditioning

The LM2904VQPWR fits two-channel industrial sensor conditioning because its two independent amplifier sections can provide gain and buffering without duplicating the IC footprint. With a 30 V maximum supply rating, the device can interface suitable higher-voltage sensor stages while retaining a -40 °C to 125 °C ambient operating range. Place each amplifier around the selected sensor interface, use local feedback networks, and bypass the supply close to pins 4 and 8. The 700 kHz bandwidth is appropriate for many low-to-moderate-bandwidth industrial signals, but engineers must verify the input common-mode range, output swing, sensor impedance, and system noise requirements.

🎧

Low-Frequency Active Filtering

The LM2904VQPWR is suitable for low-frequency active-filter stages because it provides two independently usable, frequency-compensated amplifiers in one 8-pin TSSOP package. The 700 kHz gain-bandwidth product gives useful bandwidth for audio-band and measurement-filter networks, while the 30 V supply capability supports a wider input range than typical 5 V parts. Configure each section with the required resistor and capacitor network, observe the manufacturer’s stability guidance, and keep high-impedance nodes compact. Verify noise, gain accuracy, and allowable output loading before using the same dual-amplifier configuration for both filter channels.

🎧

Audio Preamplification

The LM2904VQPWR can serve as a general-purpose audio preamplifier in equipment where two low-frequency channels are required. Its 700 kHz gain-bandwidth product comfortably spans conventional audio bandwidth, and the two independent sections can support stereo or dual-channel amplification. The 30 V maximum supply rating permits operation from higher-voltage analog rails when signal levels and output swing permit. Use stable closed-loop gain, keep input-return paths short, and isolate the audio return from switching currents. Confirm input noise, output drive, distortion, and common-mode limits from the manufacturer electrical characteristics before deploying it in a precision audio path.

⚡

Motor and Actuator Feedback Control

The LM2904VQPWR is appropriate for general motor or actuator feedback loops that require sensing a control voltage and closing an analog loop. Its dual architecture can monitor a command or feedback signal while amplifying a second related signal, reducing the number of packages on the controller board. The 30 V supply rating supports suitable 24 V industrial systems, and the -40 °C to 125 °C range is useful for extended-temperature equipment. Keep motor-return currents out of the signal ground, provide local supply bypassing, and verify common-mode range, output swing, and stability under the actual load rather than assuming the nominal supply rating alone is sufficient.

📱

Battery-Powered Analog Front End

The LM2904VQPWR can implement two amplified channels in battery-powered instrumentation while operating from a single or split supply. Its dual-amplifier configuration reduces package count, and the 700 kHz bandwidth accommodates many sensor, current-sense, and auxiliary audio signals without requiring a high-speed amplifier. The key design checks are quiescent current, input common-mode range, output swing, and behavior as the battery voltage changes. Use the manufacturer’s recommended operating conditions, include supply bypassing, and avoid designs that require rail-to-rail input or output performance unless those functions are confirmed in the device data.

🔧

Test and Measurement Front Panel

The LM2904VQPWR is well suited to buffering and conditioning inputs in general test and measurement equipment. Two independent amplifiers can support a pair of measurement channels, while the 700 kHz bandwidth is useful for low-speed instrumentation and control signals rather than wideband precision measurement. The 30 V supply capability accommodates protected input stages that operate above conventional logic levels. Designers should evaluate offset, input bias current, noise, and output impedance for the required accuracy, use local decoupling, and avoid long high-impedance traces that can increase pickup and sensitivity to parasitic capacitance.

What is the operating voltage of LM2904VQPWR?
The LM2904VQPWR supports supply operation up to 30 V and can be powered from either a single supply or split supplies. According to the Texas Instruments LM2904V product page, the device is a dual operational amplifier intended for general-purpose analog signal conditioning. The exact input common-mode range and output swing should be selected from the manufacturer datasheet for the specific feedback configuration, because those limits depend on supply voltage and output load.
What are the key specifications of LM2904VQPWR that engineers should know?
The LM2904VQPWR is a dual operational amplifier with a 30 V maximum supply rating, 700 kHz gain-bandwidth product, and a -40 °C to 125 °C operating-temperature range. According to the Texas Instruments product documentation, it contains two independent, high-gain, frequency-compensated amplifier sections and is packaged in an 8-pin TSSOP. These characteristics make it suitable for general-purpose amplification, filtering, feedback, and dual-channel analog conditioning rather than high-speed or precision-signal conversion.
Where can I download the LM2904VQPWR datasheet PDF?
The official LM2904VQPWR datasheet can be obtained through the Texas Instruments LM2904V product page and the manufacturer documentation linked for the LM2904V family. The manufacturer product page identifies the device as a dual, 30 V, 700 kHz operational amplifier rated from -40 °C to 125 °C. Use the manufacturer PDF for final pin definitions, electrical limits, recommended operating conditions, and package drawings before releasing the PCB or production BOM.
Where can I find the LM2904VQPWR pinout?
The LM2904VQPWR pinout is defined in the pin-configuration section of the Texas Instruments LM2904V manufacturer datasheet. The component is an 8-pin TSSOP (PW) containing two independent operational amplifiers, so each section uses separate input and output pins while sharing the supply rails. Use the manufacturer pin table and package drawing for PCB connection rather than relying on a generic dual-op-amp drawing, because exposed-pad or thermal-pad arrangements can vary by package.
Is LM2904VQPWR suitable for industrial control and instrumentation?
The LM2904VQPWR is suitable for many industrial-control and instrumentation signal paths because it combines a 30 V supply rating with operation from -40 °C to 125 °C. Its two independent amplifier sections can process two related channels in a compact package. According to the Texas Instruments product page, it is a frequency-compensated general-purpose device; final suitability should be checked against transient levels, grounding, noise requirements, and the qualification rules of the finished equipment.
What can replace LM2904VQPWR?
A replacement must have the same 8-pin TSSOP footprint, compatible pin assignment, compatible supply range, and acceptable bandwidth and offset performance. The closest catalog alternative identified is TI LM2904PWR, which shares the LM2904 dual-amplifier family and TSSOP format. Because ordering suffixes can encode temperature grade, qualification, or packaging, engineers should compare the specific ordering tables and pin descriptions before treating any candidate as a production drop-in replacement.
Is LM2904VQPWR the same as the ROHM LM2904VQPWR?
The same LM2904VQPWR ordering code is listed for both Texas Instruments and ROHM Semiconductor, but they must not be assumed to be interchangeable without comparing their manufacturer-specific datasheets. Both listings identify an 8-pin TSSOP dual operational amplifier, yet device revisions, qualification, test limits, marking, and sourcing conditions may differ. The Texas Instruments version is the primary subject of this page, and its manufacturer documentation should control all production substitutions.
LM2904VQPWR vs LM2904PWR - which is better for a new design?
Choose the LM2904VQPWR when the ordering requirements of the Texas Instruments LM2904V family match the design, and choose LM2904PWR when that ordering code satisfies the required grade and sourcing plan. Both belong to the dual, general-purpose LM2904 family and use an 8-pin TSSOP format, but suffix-specific temperature, qualification, and marking details can differ. Compare the complete ordering tables and electrical tables rather than choosing solely from the base family name.
When should I choose LM2904VQPWR over another dual op amp?
Choose the LM2904VQPWR when a design needs two general-purpose amplifiers, a supply rating up to 30 V, a 700 kHz gain-bandwidth product, and operation across -40 °C to 125 °C. It is particularly useful when one package must implement two related analog channels. Select a different amplifier when the application requires substantially lower offset, lower noise, faster slew rate, rail-to-rail input or output operation, lower quiescent current, or an exact automotive qualification not established for this ordering code.
How should LM2904VQPWR be decoupled on a PCB?
Place the supply bypass capacitor as close as practical to the LM2904VQPWR supply pins, and connect the package ground and analog return through a low-impedance path. Keep feedback resistors and amplifier inputs away from switching-node and high-current return paths to reduce coupling. The manufacturer documentation provides recommended application guidance, including supply bypassing and layout practice. Maintain short ground returns and use separate decoupling close to each supply connection when the device is placed at the end of a supply branch.
Does LM2904VQPWR need an external frequency-compensation capacitor?
The LM2904VQPWR is described by Texas Instruments as containing frequency-compensated amplifier sections, so the normal general-purpose feedback arrangements do not require an added compensation capacitor. Compensation is internal, although the selected gain, load, and noise-gain network still determine stability and bandwidth. Verify the intended topology against the manufacturer application guidance and electrical characteristics, especially for high-capacitive loads or unusually low closed-loop gains.
Can LM2904VQPWR run from a single 5 V supply?
The LM2904VQPWR can operate from a single supply, but the 5 V rail must remain within the device’s complete input common-mode and output-swing limits at the selected load. The 30 V rating defines the upper supply capability rather than confirming every operating point. According to the manufacturer datasheet, use the single-supply application circuit and electrical-limit tables to verify signal levels at the inputs and outputs before treating 5 V operation as acceptable.
Where to buy LM2904VQPWR online?
Use the Request a Quote form on this page to request LM2904VQPWR availability, current lead time, minimum order quantity, and orderable packaging. The form is the appropriate route for a firm quotation and delivery schedule. Do not infer production availability from a product page alone, and provide the exact Texas Instruments ordering code, target quantity, and destination country when requesting the quotation.
What is the price of LM2904VQPWR?
The current commercial price for LM2904VQPWR is best obtained through the Request a Quote form on this page. Submit the exact MPN, quantity, and required delivery terms so the quotation reflects current sourcing and packaging conditions. The structured pricing area may update independently, and a firm transaction price should not be inferred from an isolated historical listing or from a different manufacturer’s version of the same ordering code.
What is the lead time and stock status for LM2904VQPWR?
Current stock and lead time for LM2904VQPWR should be confirmed through the Request a Quote form on this page. The exact suffix identifies the orderable package, while production allocation and shipment timing can vary with order quantity and destination. Provide the required quantity, date code policy, and shipping country with the request. This avoids treating a distributor listing status as a guaranteed factory allocation for a new production order.
Is LM2904VQPWR compliant with RoHS and REACH?
The RoHS and REACH status must be confirmed for the specific Texas Instruments ordering code through the manufacturer product documentation before marking the finished product as compliant. The general family description and distributor listings do not, by themselves, establish every material-declaration status. Request the current manufacturer compliance or material-declaration information for LM2904VQPWR, and preserve that documentation with the product’s environmental and quality records.

بيانات مرجعية هندسية لـ LM2904VQPWR — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose LM2904VQPWR when the design needs two independent general-purpose amplifier channels, operation from a supply up to 30 V, a 700 kHz gain-bandwidth product, and an extended temperature range of -40 °C to 125 °C. It is a practical choice for industrial signal conditioning, low-frequency filters, audio preamplification, and control-feedback circuits that do not require precision offset, low noise, rail-to-rail operation, or a faster slew rate. LM2904PWR is the closest same-manufacturer family option when its ordering and qualification requirements fit the production plan. The ROHM-manufactured LM2904VQPWR offers the same ordering code and dual TSSOP format, but its manufacturer-specific electrical limits, markings, qualification, and lifecycle conditions must be compared directly before substitution. For any alternative, verify the complete pin assignment, supply behavior, common-mode range, output swing, stability, and package drawing.

المقارنة مع البدائل

المعامل هذا المنتج LM2904PWR LM2904VQPWR
Package 8-pin TSSOP (PW) 8-pin TSSOP 8-pin TSSOP-B
Brand Texas Instruments Texas Instruments ROHM Semiconductor
Amplifier Configuration Dual operational amplifier Dual operational amplifier Dual operational amplifier
Number of Channels 2 channels 2 channels 2 channels

أبرز الفروقات

  • Two independent channels in one compact package (مقابلLM2904PWR)
  • 30 V supply capability supports higher-voltage analog rails (مقابلLM2904PWR)
  • 700 kHz bandwidth for general-purpose dual-channel signal conditioning (مقابلLM2904VQPWR)

ملاحظات التصميم

Place the supply bypass capacitor immediately adjacent to the LM2904VQPWR supply pins and route it through a short, low-inductance path to the device ground reference. For split-supply operation, decouple both supply rails separately. Keep the two amplifier return paths joined at a quiet analog-ground point and avoid sharing narrow traces with motor, relay, or switching-converter currents. The compact TSSOP-8 footprint makes lead-routing discipline important because longer feedback connections can increase coupling and sensitivity to parasitic capacitance.

Use the minimum practical feedback resistance and keep connected capacitance on amplifier outputs within the manufacturer’s recommended range. High-impedance input nodes should be short and guarded against nearby switching traces. The internal frequency compensation supports normal general-purpose closed-loop configurations, but unusual noise gain, capacitive loading, or very low gain can alter stability or bandwidth. Confirm the final network with the manufacturer application guidance and use an oscilloscope to check ringing when driving long cables, ADC inputs, or capacitive transducers.

Do not interpret the 30 V maximum supply rating as permission to use every input and output voltage at that rail. Check the input common-mode range, output swing, supply limits, and load current at the intended operating point, especially near the positive or negative rail. For single-supply operation, confirm that the signal remains inside the usable input range at minimum supply voltage. Also verify that any 24 V industrial environment uses appropriate surge and reverse-polarity protection outside the amplifier package.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The Texas Instruments LM2904V product documentation should be used to confirm material and environmental declarations for the exact LM2904VQPWR ordering code. No specific compliance claim is established by the manufacturer product-page summary or distributor listing excerpts.

تم التحقق من البيانات في: 2026-11-17 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

LM2904VQPWR datasheet LM2904VQPWR pinout LM2904VQPWR datasheet pdf LM2904VQPWR TSSOP-8 LM2904VQPWR equivalent LM2904VQPWR replacement LM2904VQPWR cross reference LM2904VQPWR vs LM2904PWR LM2904VQPWR price LM2904VQPWR stock Texas Instruments LM2904VQPWR LM2904VQPWR application circuit

المكونات والمصطلحات ذات الصلة

Texas Instruments LM2904VQPWR LM2904PWR ROHM Semiconductor ROHM LM2904VQPWR Operational amplifier Dual operational amplifier General-purpose amplifier Analog amplifier Amplifier IC Semiconductor TSSOP-8 PW package Surface-mount package Gain-bandwidth product 700 kHz 30 V Frequency compensation Single-supply operation Split-supply operation Industrial signal conditioning Active filter Audio preamplification Motor feedback control
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر