LM324ANSRG4 - 1.2MHz Quad Op Amp | Texas Instruments
MPN: LM324ANSRG4 ✓ نشطLM324ANSRG4 نظرة عامة
An operational amplifier is a voltage-gain element that uses differential input voltage to control an output. A quad operational amplifier contains four similar amplifier sections and belongs to the broader hierarchy of analog amplifiers, amplifier ICs, and integrated circuits. The LM324ANSRG4 is intended for general-purpose signal conditioning, where low cost, supply versatility, and straightforward operation are more important than high speed or low offset.
Four amplifier circuits are provided in one 14-SOIC package, reducing component count and simplifying PCB assembly. The 1.2 MHz gain-bandwidth product supports applications operating at relatively low frequencies, including buffered sensor signals, slow analog control loops, audio paths, and general signal conditioning. A typical supply-current drain of 0.8 mA is useful for battery-powered or low-power equipment, although total system consumption also depends on the operating voltage and load on each amplifier.
The common-mode input voltage range includes ground, allowing a single positive supply to process signals that approach 0 V. This characteristic simplifies sensor interfaces whose outputs remain near the lower supply rail. The device is identified as a standard general-purpose amplifier and is assembled in a surface-mount 14-SOIC package, which supports automated manufacturing and compact PCB layouts.
Typical uses include four-channel sensor conditioning, low-frequency active filters, buffered analog inputs, general-purpose instrumentation, and educational or experimental amplifier circuits. Because the LM324ANSRG4 provides four matched functional sections, designers can allocate amplifiers to input buffering, gain stages, active filtering, and output conditioning within one package.
A key design consideration is to keep each signal within the amplifier's common-mode and output-voltage limits throughout its operating range. Decoupling capacitors should be placed close to the power pins, and unused amplifier sections should be configured according to the manufacturer's recommendations rather than left floating. Stable feedback networks and suitable source and load impedances remain important for predictable closed-loop behavior.
This product page combines package, electrical, application, sourcing, and replacement guidance in one engineering-oriented reference. It also distinguishes true same-footprint alternatives from broader LM324-family devices that use different packages, helping PCB designers avoid substitutions that require layout changes.
بدائل مباشرة لـ LM324ANSRG4 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع LM324ANSRG4 (نفس عامل الشكل والبصمة) — يختلف في Amplifier Type, Package, Operating Temperature Range, Mounting Type, Gain-Bandwidth Product.
LM324AN
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←LM324AM
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LM324AMX/NOPB
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LM324AP
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
LM324ADR2G
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←LM324ANSRG4 الحدود القصوى والخصائص الكهربائية
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| Gain-Bandwidth Product | 1.2 MHz |
| Typical Supply Current Drain | 0.8 mA |
| Common-Mode Input Range | Includes ground |
| العلبة | 14-SOIC |
| Package Width | 5.30 mm |
| Package Body Width | 0.209 inch |
| نوع التركيب | Surface mount |
تكوين أطراف LM324ANSRG4
| دبوس 1 | OUT1 — Amplifier 1 output |
| دبوس 2 | IN1- — Amplifier 1 inverting input |
| دبوس 3 | IN1+ — Amplifier 1 non-inverting input |
| دبوس 4 | GND — Ground connection |
| دبوس 5 | IN2+ — Amplifier 2 non-inverting input |
| دبوس 6 | IN2- — Amplifier 2 inverting input |
| دبوس 7 | OUT2 — Amplifier 2 output |
| دبوس 8 | OUT3 — Amplifier 3 output |
| دبوس 9 | IN3- — Amplifier 3 inverting input |
| دبوس 10 | IN3+ — Amplifier 3 non-inverting input |
| دبوس 11 | GND — Ground connection |
| دبوس 12 | IN4+ — Amplifier 4 non-inverting input |
| دبوس 13 | IN4- — Amplifier 4 inverting input |
| دبوس 14 | OUT4 — Amplifier 4 output |
التطبيقات النموذجية
LM324ANSRG4 مناسب لـ 6 التطبيقs: Sensor Signal Conditioning, Industrial Control Loops, Audio Preamplifier Buffers, Active Filter and Equalization, Battery-Powered Measurement, Test and Measurement Buffering.
Sensor Signal Conditioning
The LM324ANSRG4 is well suited to conditioning low-frequency sensor outputs because its common-mode input range includes ground and its four amplifier sections can support buffering, scaling, and filtering. A 1.2 MHz gain-bandwidth product is ample for common temperature, pressure, and position sensors when the closed-loop bandwidth is well below that value. The typical 0.8 mA supply-current drain also benefits low-power sensing nodes. Place the active device close to the sensor connector to minimize pickup on high-impedance traces, then use grounded or referenced feedback networks appropriate to the sensor output.
موصى به
Industrial Control Loops
LM324ANSRG4 can implement slow industrial control and monitoring functions where four analog channels are required on a compact board. Its four-circuit 14-SOIC package simplifies feedback networks for PID-style error amplifiers, actuator drivers, threshold comparators, and active stages. The 1.2 MHz gain-bandwidth product is suitable for control loops whose closed-loop bandwidth remains much lower, while the ground-inclusive common-mode range supports circuits operating from a single positive supply. Check output-current, output-swing, and stability requirements for each specific load before finalizing the analog front end.
موصى به
Audio Preamplifier Buffers
The four independent amplifier sections in LM324ANSRG4 can buffer multiple low-frequency audio channels, such as microphone, line-level, and headphone-driver stages in general-purpose equipment. Its 1.2 MHz gain-bandwidth product supports modest-bandwidth audio preamplification, while the common-mode range including ground helps simplify single-supply signal paths. Configure each section with stable feedback and suitable source and load impedances, and confirm output swing before the design is accepted. The device is appropriate for general audio tasks rather than high-bandwidth or low-noise audiophile requirements.
موصى به
Active Filter and Equalization
LM324ANSRG4 can implement first- and second-order active-filter sections because four amplifiers provide flexible buffering and gain distribution in a single 14-SOIC package. Its 1.2 MHz nominal gain-bandwidth product gives ample closed-loop bandwidth for many low-frequency measurement, communication, and audio equalization networks. The common-mode input range including ground is useful in single-supply filter designs, although component tolerances can dominate passive-corner accuracy. Verify the selected capacitors and resistors against the manufacturer's recommended operating region and avoid relying on amplifier slew rate for unexpectedly high-frequency signals.
موصى به
Battery-Powered Measurement
LM324ANSRG4 is suitable for low-power measurement front ends where each of the four amplifier sections can buffer or amplify a modest-bandwidth signal. The typical 0.8 mA supply-current drain supports efficient operation when the source impedance and feedback values do not require additional bias current. Its ground-inclusive common-mode input range simplifies interfaces to sensors operating near 0 V. In battery designs, include local supply bypassing, control the enable state at the system level, and confirm the device's quiescent and output-current behavior over the intended temperature range using the manufacturer datasheet.
موصى به
Test and Measurement Buffering
The LM324ANSRG4 can provide four input or output buffers for general-purpose test equipment, educational instrumentation, and low-frequency measurement interfaces. A 1.2 MHz gain-bandwidth product supports instrumentation signals within the amplifier's moderate operating range, while the common-mode input range includes ground simplifies zero-centered or near-ground measurements. The four-section 14-SOIC package reduces board area and assembly count in multi-channel fixtures. Use unity-gain stable configurations, maintain compatible source and load impedances, and verify noise, offset, and output-accuracy requirements when precision rather than generality is the primary goal.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ LM324ANSRG4 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | LM324AN | LM324AM | LM324AMX/NOPB | LM324AP | LM324A |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Number of Amplifier Circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz |
| Typical Supply Current Drain | 0.8 mA | 0.8 mA | 0.8 mA | 0.8 mA | 0.8 mA | 0.8 mA |
| Common-Mode Input Range | Includes ground | Includes ground | Includes ground | Includes ground | Includes ground | Includes ground |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
أبرز الفروقات
- Four general-purpose amplifier circuits in one package (مقابلLM358)
- Ground-inclusive common-mode operation (مقابلLM2902)
- Moderate bandwidth matched to general-purpose analog tasks (مقابلLM324AN)
ملاحظات التصميم
Place the supply-bypass capacitor as close as practical to the power and ground pins, and route the return current through a low-impedance ground plane. The four amplifier sections share the same package supplies, so a shared supply perturbation can affect multiple channels simultaneously. Keep analog input and feedback traces away from switching-node and high-current paths, and use a solid ground reference beneath the 14-SOIC footprint.
Do not assume every unused amplifier section may be left open. Configure unused inputs according to the Texas Instruments LM324 datasheet, normally by tying the non-inverting input to a defined reference within the input common-mode range and the inverting input to the output. Leaving an input floating can allow interference to enter an unused high-impedance stage and may create unnecessary switching activity.
The LM324ANSRG4 has a 1.2 MHz gain-bandwidth product, so closed-loop bandwidth must remain comfortably below that limit and output slewing must satisfy the intended waveform. Use stable feedback ratios and check the source impedance, load capacitance, and selected noise-gain bandwidth. For source impedances above the recommended range, add a dedicated buffer instead of allowing bias-current error and offset to dominate the signal path.
Calculate the total package dissipation from the sum of output current and supply current across all four amplifier sections. The 0.8 mA value is the published typical supply-current drain, while actual consumption depends on supply voltage, output loading, input bias current, and operating state. For battery-powered designs, include the quiescent current of every populated channel and verify that the regulator can support the combined analog load.
معلومات الامتثال
No definitive compliance declarations were identified in the accessible product information. The device is a general-purpose amplifier IC and is not identified as an AEC-Q100-qualified automotive part.