Texas Instruments

LM324ANSRG4 - 1.2MHz Quad Op Amp | Texas Instruments

N.º da peça: LM324ANSRG4 ✓ Ativo
0.8 mA Vdss 14-SOIC Package
MOQ: 1 |

LM324ANSRG4 Visão geral

Texas Instruments LM324ANSRG4 is a four-circuit general-purpose operational amplifier packaged in a 14-pin SOIC. The device combines a nominal gain-bandwidth product of 1.2 MHz with low supply-current drain of 0.8 mA typical, while its common-mode input range includes ground for convenient single-supply operation. The LM324 family integrates four amplifiers in one package, reducing board area compared with four individual single-amplifier packages.

An operational amplifier is a voltage-gain element that uses differential input voltage to control an output. A quad operational amplifier contains four similar amplifier sections and belongs to the broader hierarchy of analog amplifiers, amplifier ICs, and integrated circuits. The LM324ANSRG4 is intended for general-purpose signal conditioning, where low cost, supply versatility, and straightforward operation are more important than high speed or low offset.

Four amplifier circuits are provided in one 14-SOIC package, reducing component count and simplifying PCB assembly. The 1.2 MHz gain-bandwidth product supports applications operating at relatively low frequencies, including buffered sensor signals, slow analog control loops, audio paths, and general signal conditioning. A typical supply-current drain of 0.8 mA is useful for battery-powered or low-power equipment, although total system consumption also depends on the operating voltage and load on each amplifier.

The common-mode input voltage range includes ground, allowing a single positive supply to process signals that approach 0 V. This characteristic simplifies sensor interfaces whose outputs remain near the lower supply rail. The device is identified as a standard general-purpose amplifier and is assembled in a surface-mount 14-SOIC package, which supports automated manufacturing and compact PCB layouts.

Typical uses include four-channel sensor conditioning, low-frequency active filters, buffered analog inputs, general-purpose instrumentation, and educational or experimental amplifier circuits. Because the LM324ANSRG4 provides four matched functional sections, designers can allocate amplifiers to input buffering, gain stages, active filtering, and output conditioning within one package.

A key design consideration is to keep each signal within the amplifier's common-mode and output-voltage limits throughout its operating range. Decoupling capacitors should be placed close to the power pins, and unused amplifier sections should be configured according to the manufacturer's recommendations rather than left floating. Stable feedback networks and suitable source and load impedances remain important for predictable closed-loop behavior.

This product page combines package, electrical, application, sourcing, and replacement guidance in one engineering-oriented reference. It also distinguishes true same-footprint alternatives from broader LM324-family devices that use different packages, helping PCB designers avoid substitutions that require layout changes.

Alternativas drop-in para LM324ANSRG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com LM324ANSRG4 (mesmo formato e footprint) — diferindo em Amplifier Type, Package, Operating Temperature Range, Mounting Type, Gain-Bandwidth Product.

onsemi
Amplifier Type: General Purpose
Comparar com LM324ANSRG4 →
Texas Instruments
Amplifier Type: General-purpose operational amplifier
Package: 14-pin SOIC
Operating Temperature Range: 0 °C to 70 °C
Comparar com LM324ANSRG4 →
Texas Instruments
Amplifier Type: Standard (General Purpose)
Package: SOIC (D), 14 pins
Operating Temperature Range: 0°C to 70°C
Texas Instruments
Amplifier Type: General-purpose operational amplifier
Package: 14-pin PDIP
Operating Temperature Range: 0°C to +70°C
Comparar com LM324ANSRG4 →

LM324AN

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 14-SOIC
General-purpose operational amplifier · 4 circuits · 4 outputs · 30 V · 1.2 MHz · 3 mV · Internally frequency-compensated · Single or dual supply

Consulte o preço

Ver ficha técnica →

LM324AM

✅ Drop-In
Texas Instruments
📦 14-SOIC
General-purpose operational amplifier · 4 channels · 3 V to 32 V · 40 mA · 65 dB · 14-pin SOIC · Surface mount · 0 °C to 70 °C

Consulte o preço

Ver ficha técnica →

LM324AMX/NOPB

✅ Drop-In
Texas Instruments
📦 14-SOIC
Standard (General Purpose) · 4 circuits · 3 V to 32 V · 1 MHz · 100 dB · Internally frequency compensated for unity gain · Includes ground · 0 V to VCC - 1.5 V

Consulte o preço

Ver ficha técnica →

LM324AP

✅ Drop-In ⚠️ Especificações não verificadas
📦 14-SOIC
Same-family 14-SOIC quad amplifier with a 1.2 MHz nominal gain-bandwidth product; the named bandwidth difference is 0%, while ordering and temperature details should be checked.

📋 Alternativa de referência (fora do catálogo)

LM324ADR2G

✅ Drop-In ⚠️ Especificações não verificadas
onsemi
📦 14-SOIC
General Purpose · 4 · 3 V to 32 V · ±1.5 V to ±16 V · 1 MHz · 0.6 V/µs · 3 mV

Consulte o preço

Ver ficha técnica →

LM324ANSRG4 Classificações máximas e características elétricas

Amplifier Type Quad general-purpose operational amplifier
Number of Amplifier Circuits 4 circuits
Gain-Bandwidth Product 1.2 MHz
Typical Supply Current Drain 0.8 mA
Common-Mode Input Range Includes ground
Encapsulamento 14-SOIC
Package Width 5.30 mm
Package Body Width 0.209 inch
Tipo de montagem Surface mount

Configuração de pinos do LM324ANSRG4

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pino 1 OUT1 — Amplifier 1 output
Pino 2 IN1- — Amplifier 1 inverting input
Pino 3 IN1+ — Amplifier 1 non-inverting input
Pino 4 GND — Ground connection
Pino 5 IN2+ — Amplifier 2 non-inverting input
Pino 6 IN2- — Amplifier 2 inverting input
Pino 7 OUT2 — Amplifier 2 output
Pino 8 OUT3 — Amplifier 3 output
Pino 9 IN3- — Amplifier 3 inverting input
Pino 10 IN3+ — Amplifier 3 non-inverting input
Pino 11 GND — Ground connection
Pino 12 IN4+ — Amplifier 4 non-inverting input
Pino 13 IN4- — Amplifier 4 inverting input
Pino 14 OUT4 — Amplifier 4 output

Aplicações típicas

LM324ANSRG4 é adequado para 6 aplicaçãos: Sensor Signal Conditioning, Industrial Control Loops, Audio Preamplifier Buffers, Active Filter and Equalization, Battery-Powered Measurement, Test and Measurement Buffering.

🧩

Sensor Signal Conditioning

The LM324ANSRG4 is well suited to conditioning low-frequency sensor outputs because its common-mode input range includes ground and its four amplifier sections can support buffering, scaling, and filtering. A 1.2 MHz gain-bandwidth product is ample for common temperature, pressure, and position sensors when the closed-loop bandwidth is well below that value. The typical 0.8 mA supply-current drain also benefits low-power sensing nodes. Place the active device close to the sensor connector to minimize pickup on high-impedance traces, then use grounded or referenced feedback networks appropriate to the sensor output.

🏭

Industrial Control Loops

LM324ANSRG4 can implement slow industrial control and monitoring functions where four analog channels are required on a compact board. Its four-circuit 14-SOIC package simplifies feedback networks for PID-style error amplifiers, actuator drivers, threshold comparators, and active stages. The 1.2 MHz gain-bandwidth product is suitable for control loops whose closed-loop bandwidth remains much lower, while the ground-inclusive common-mode range supports circuits operating from a single positive supply. Check output-current, output-swing, and stability requirements for each specific load before finalizing the analog front end.

🎧

Audio Preamplifier Buffers

The four independent amplifier sections in LM324ANSRG4 can buffer multiple low-frequency audio channels, such as microphone, line-level, and headphone-driver stages in general-purpose equipment. Its 1.2 MHz gain-bandwidth product supports modest-bandwidth audio preamplification, while the common-mode range including ground helps simplify single-supply signal paths. Configure each section with stable feedback and suitable source and load impedances, and confirm output swing before the design is accepted. The device is appropriate for general audio tasks rather than high-bandwidth or low-noise audiophile requirements.

🌐

Active Filter and Equalization

LM324ANSRG4 can implement first- and second-order active-filter sections because four amplifiers provide flexible buffering and gain distribution in a single 14-SOIC package. Its 1.2 MHz nominal gain-bandwidth product gives ample closed-loop bandwidth for many low-frequency measurement, communication, and audio equalization networks. The common-mode input range including ground is useful in single-supply filter designs, although component tolerances can dominate passive-corner accuracy. Verify the selected capacitors and resistors against the manufacturer's recommended operating region and avoid relying on amplifier slew rate for unexpectedly high-frequency signals.

⚡

Battery-Powered Measurement

LM324ANSRG4 is suitable for low-power measurement front ends where each of the four amplifier sections can buffer or amplify a modest-bandwidth signal. The typical 0.8 mA supply-current drain supports efficient operation when the source impedance and feedback values do not require additional bias current. Its ground-inclusive common-mode input range simplifies interfaces to sensors operating near 0 V. In battery designs, include local supply bypassing, control the enable state at the system level, and confirm the device's quiescent and output-current behavior over the intended temperature range using the manufacturer datasheet.

🖥️

Test and Measurement Buffering

The LM324ANSRG4 can provide four input or output buffers for general-purpose test equipment, educational instrumentation, and low-frequency measurement interfaces. A 1.2 MHz gain-bandwidth product supports instrumentation signals within the amplifier's moderate operating range, while the common-mode input range includes ground simplifies zero-centered or near-ground measurements. The four-section 14-SOIC package reduces board area and assembly count in multi-channel fixtures. Use unity-gain stable configurations, maintain compatible source and load impedances, and verify noise, offset, and output-accuracy requirements when precision rather than generality is the primary goal.

Resumo dos produtos recomendados

LM2902 Related dual general-purpose operational amplifier family member Usado em: Sensor Signal Conditioning, Industrial Control Loops, Audio Preamplifier Buffers, Battery-Powered Measurement, Test and Measurement Buffering LM324 Related quad general-purpose operational amplifier Usado em: Sensor Signal Conditioning, Industrial Control Loops, Active Filter and Equalization, Battery-Powered Measurement, Test and Measurement Buffering LM358 Related dual general-purpose amplifier family member Usado em: Audio Preamplifier Buffers, Active Filter and Equalization
What is the LM324ANSRG4?
The LM324ANSRG4 is a Texas Instruments four-circuit general-purpose operational amplifier in a 14-SOIC package. According to the manufacturer datasheet, it provides four amplifier sections, a 1.2 MHz nominal gain-bandwidth product, and a common-mode input range that includes ground. These characteristics make it suitable for low-frequency buffering, sensor conditioning, active filtering, and general analog signal-processing circuits.
What are the key specifications of LM324ANSRG4 that engineers should know?
The LM324ANSRG4 combines four amplifier circuits, a 1.2 MHz gain-bandwidth product, and a typical supply-current drain of 0.8 mA in one 14-SOIC package. According to the Texas Instruments datasheet, its common-mode input voltage range includes ground, supporting single-supply designs whose input signals operate near 0 V. The device is classified as a standard general-purpose amplifier rather than a precision or high-speed part.
What is the operating voltage of LM324ANSRG4?
The LM324ANSRG4 supports single- and dual-supply operation, but the exact voltage limits must be confirmed in the Texas Instruments LM324 datasheet before final circuit design. The published family information identifies wide supply ranges and notes that the common-mode input range includes ground. Use the manufacturer supply-voltage and common-mode limits for worst-case input, output, and temperature conditions rather than relying on the nominal operating point alone.
Where can I download the LM324ANSRG4 datasheet PDF?
The LM324ANSRG4 datasheet is available from the Texas Instruments product documentation linked for this MPN and from the PDF datasheet index listed on this page. According to the manufacturer datasheet, the device is a quadruple operational amplifier with four amplifier sections in a 14-SOIC package. Use the current manufacturer document when checking revision-dependent electrical limits, pin functions, and application guidance.
Where can I find the LM324ANSRG4 pinout?
The LM324ANSRG4 pinout is defined by the Texas Instruments LM324 datasheet and the 14-SOIC package diagram on this page. Pins 1 through 4 form the first amplifier, pins 5 through 7 the second, pins 8 through 11 the third, and pins 12 through 14 the fourth. Verify signal names against the manufacturer pin-description table before assigning PCB nets or making prototype connections.
Is LM324ANSRG4 suitable for single-supply applications?
Yes, the LM324ANSRG4 is suitable for many single-supply applications because its common-mode input range includes ground. According to the Texas Instruments family information, this allows the amplifier to process signals near the lower supply rail without requiring a negative supply. Output swing, input range, and stability still depend on the exact supply voltage, so all limits should be checked in the manufacturer datasheet.
What is the LM324ANSRG4 used for?
The LM324ANSRG4 is used for four-channel low-frequency analog signal conditioning, including sensor buffering, active filters, gain stages, and output amplification. Its four circuits reduce package count, while the 1.2 MHz gain-bandwidth product is appropriate for signals well below the amplifier's upper frequency capability. The manufacturer identifies it as a standard general-purpose amplifier for broad analog applications.
LM324ANSRG4 vs LM324AN - which one should I choose?
Choose LM324ANSRG4 when the required order form is the NSR taped-and-reelled 14-SOIC configuration; LM324AN is the closely related non-reel ordering form in the same family. Their core amplifier characteristics are the same, including four circuits and a 1.2 MHz nominal gain-bandwidth product. Confirm the exact ordering suffix, mounting form, and availability for your assembly process before making the final purchasing decision.
LM324ANSRG4 vs LM324AM - which is better for a new design?
LM324ANSRG4 and LM324AM belong to the same Texas Instruments LM324 family and use the 14-SOIC footprint, but the ordering suffix identifies different catalog variants. The published LM324ANSRG4 specifications show four circuits, 1.2 MHz gain-bandwidth product, and 0.8 mA typical supply-current drain. Review the manufacturer comparison for any grade-specific temperature or qualification differences before selecting either ordering form.
When should I choose LM324ANSRG4 over another quad op amp?
Choose LM324ANSRG4 when a new design needs four general-purpose amplifiers in a standard 14-SOIC package and can operate within the family's moderate frequency and common-mode limits. Its 1.2 MHz gain-bandwidth product and ground-inclusive common-mode range suit low-frequency signal conditioning. Select a precision or faster amplifier instead when offset accuracy, bandwidth, noise, or output-drive requirements exceed the LM324 family's capabilities.
What is the best drop-in replacement for LM324ANSRG4?
The closest drop-in choices are same-family Texas Instruments LM324 order variants that retain the 14-SOIC footprint, such as LM324AN, LM324AM, and LM324AMX/NOPB. The LM324ANSRG4 has four circuits, a 1.2 MHz gain-bandwidth product, and a 14-SOIC package. A candidate must also match supply range, common-mode limits, output swing, temperature grade, and exact pin function before it can be treated as a drop-in replacement.
Can LM324AN replace LM324ANSRG4 on the same PCB?
Yes, LM324AN is a same-family candidate for PCB reuse because it uses the same 14-SOIC footprint and contains the same four-amplifier arrangement. According to the family information, the core performance includes a 1.2 MHz gain-bandwidth product and a common-mode input range including ground. The practical difference is primarily the ordering and packing form, so confirm sourcing and reel requirements before substitution.
What can replace LM324ANSRG4?
A drop-in replacement must use the same 14-SOIC pin arrangement and preserve the LM324's supply, common-mode, output-swing, and frequency characteristics. Same-family Texas Instruments variants such as LM324AN, LM324AM, and LM324AMX/NOPB are the closest options identified by the available cross-reference information. Do not substitute dual, single, or different-package amplifier parts without redesigning the PCB and checking the complete electrical specification.
Where to buy LM324ANSRG4 online?
Use the Request a Quote form on this page to request LM324ANSRG4 availability, current commercial terms, and the required quantity. The part is identified as a Texas Instruments four-circuit operational amplifier in a 14-SOIC package with a 1.2 MHz gain-bandwidth product. The request should state whether tape-and-reel presentation is required and the desired delivery schedule.
What is the price of LM324ANSRG4?
The current commercial price for LM324ANSRG4 is provided through the Request a Quote form on this page. The structured pricing area is intended to remain current as market conditions and quantities change. For an accurate quotation, specify the required quantity, 14-SOIC packing preference, target shipment location, and whether you need production scheduling or traceability documentation.
What is the lead time for LM324ANSRG4?
Request the current lead time and available production allocation for LM324ANSRG4 through the Request a Quote form on this page. Include your required quantity, reel format, forecast schedule, and destination when requesting a commitment. The device is a four-amplifier 14-SOIC part with a 1.2 MHz gain-bandwidth product, so a complete quotation should be based on the exact ordered configuration.

Dados de referência de engenharia para LM324ANSRG4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose LM324ANSRG4 when a design needs four general-purpose operational amplifiers in a 14-SOIC package, particularly for low-frequency sensor buffering, active filtering, test interfaces, and single-supply signal conditioning. Its common-mode input range includes ground, while the 1.2 MHz gain-bandwidth product supports modest-bandwidth closed-loop designs. LM324AN is the closest ordering alternative when the reel or packing requirement differs, and LM324AM or LM324AMX/NOPB are useful same-family alternatives whose grade-specific limits should be checked. Do not choose this device for precision offset correction, very high-speed signals, low-noise audio, or long capacitive loads without checking its datasheet limits. Parts such as LM358 and LM2902 belong to related families but provide only two amplifier circuits, so they are useful when a full quad package is unnecessary.

Comparação com alternativas

Parâmetro Este produto LM324AN LM324AM LM324AMX/NOPB LM324AP LM324A
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Number of Amplifier Circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Gain-Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz
Typical Supply Current Drain 0.8 mA 0.8 mA 0.8 mA 0.8 mA 0.8 mA 0.8 mA
Common-Mode Input Range Includes ground Includes ground Includes ground Includes ground Includes ground Includes ground
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

Principais diferenciais

  • Four general-purpose amplifier circuits in one package (vs LM358)
  • Ground-inclusive common-mode operation (vs LM2902)
  • Moderate bandwidth matched to general-purpose analog tasks (vs LM324AN)

Notas de projeto

Place the supply-bypass capacitor as close as practical to the power and ground pins, and route the return current through a low-impedance ground plane. The four amplifier sections share the same package supplies, so a shared supply perturbation can affect multiple channels simultaneously. Keep analog input and feedback traces away from switching-node and high-current paths, and use a solid ground reference beneath the 14-SOIC footprint.

Do not assume every unused amplifier section may be left open. Configure unused inputs according to the Texas Instruments LM324 datasheet, normally by tying the non-inverting input to a defined reference within the input common-mode range and the inverting input to the output. Leaving an input floating can allow interference to enter an unused high-impedance stage and may create unnecessary switching activity.

The LM324ANSRG4 has a 1.2 MHz gain-bandwidth product, so closed-loop bandwidth must remain comfortably below that limit and output slewing must satisfy the intended waveform. Use stable feedback ratios and check the source impedance, load capacitance, and selected noise-gain bandwidth. For source impedances above the recommended range, add a dedicated buffer instead of allowing bias-current error and offset to dominate the signal path.

Calculate the total package dissipation from the sum of output current and supply current across all four amplifier sections. The 0.8 mA value is the published typical supply-current drain, while actual consumption depends on supply voltage, output loading, input bias current, and operating state. For battery-powered designs, include the quiescent current of every populated channel and verify that the regulator can support the combined analog load.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No definitive compliance declarations were identified in the accessible product information. The device is a general-purpose amplifier IC and is not identified as an AEC-Q100-qualified automotive part.

Buscas relacionadas

LM324ANSRG4 datasheet LM324ANSRG4 pinout LM324ANSRG4 datasheet pdf LM324ANSRG4 specifications LM324ANSRG4 equivalent LM324ANSRG4 replacement LM324ANSRG4 cross reference LM324ANSRG4 vs LM324AN LM324ANSRG4 vs LM324AM LM324ANSRG4 14-SOIC footprint LM324ANSRG4 application circuit Texas Instruments LM324ANSRG4 LM324ANSRG4 price LM324ANSRG4 stock

Componentes & termos relacionados

Texas Instruments LM324ANSRG4 LM324AN LM324AM LM324AMX/NOPB LM324AP LM324A LM358 LM2902 LM2902K quad operational amplifier operational amplifier amplifier IC integrated circuit semiconductor 14-SOIC SOIC family surface-mount package gain-bandwidth product common-mode input voltage range supply-current drain single-supply operation signal conditioning active filter
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ