LM324ANSRG4 - 1.2MHz Quad Op Amp | Texas Instruments
料号: LM324ANSRG4 ✓ 量产中LM324ANSRG4 概述
An operational amplifier is a voltage-gain element that uses differential input voltage to control an output. A quad operational amplifier contains four similar amplifier sections and belongs to the broader hierarchy of analog amplifiers, amplifier ICs, and integrated circuits. The LM324ANSRG4 is intended for general-purpose signal conditioning, where low cost, supply versatility, and straightforward operation are more important than high speed or low offset.
Four amplifier circuits are provided in one 14-SOIC package, reducing component count and simplifying PCB assembly. The 1.2 MHz gain-bandwidth product supports applications operating at relatively low frequencies, including buffered sensor signals, slow analog control loops, audio paths, and general signal conditioning. A typical supply-current drain of 0.8 mA is useful for battery-powered or low-power equipment, although total system consumption also depends on the operating voltage and load on each amplifier.
The common-mode input voltage range includes ground, allowing a single positive supply to process signals that approach 0 V. This characteristic simplifies sensor interfaces whose outputs remain near the lower supply rail. The device is identified as a standard general-purpose amplifier and is assembled in a surface-mount 14-SOIC package, which supports automated manufacturing and compact PCB layouts.
Typical uses include four-channel sensor conditioning, low-frequency active filters, buffered analog inputs, general-purpose instrumentation, and educational or experimental amplifier circuits. Because the LM324ANSRG4 provides four matched functional sections, designers can allocate amplifiers to input buffering, gain stages, active filtering, and output conditioning within one package.
A key design consideration is to keep each signal within the amplifier's common-mode and output-voltage limits throughout its operating range. Decoupling capacitors should be placed close to the power pins, and unused amplifier sections should be configured according to the manufacturer's recommendations rather than left floating. Stable feedback networks and suitable source and load impedances remain important for predictable closed-loop behavior.
This product page combines package, electrical, application, sourcing, and replacement guidance in one engineering-oriented reference. It also distinguishes true same-footprint alternatives from broader LM324-family devices that use different packages, helping PCB designers avoid substitutions that require layout changes.
直接替换替代料: LM324ANSRG4 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LM324ANSRG4 (相同外形与封装尺寸) ——差异在于 Amplifier Type, Package, Operating Temperature Range, Mounting Type, Gain-Bandwidth Product.
LM324AN
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LM324AM
✅ 直接替换联系询价
查看数据手册 →LM324AMX/NOPB
✅ 直接替换联系询价
查看数据手册 →LM324AP
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LM324ADR2G
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →LM324ANSRG4 最大额定值与电气特性
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| Gain-Bandwidth Product | 1.2 MHz |
| Typical Supply Current Drain | 0.8 mA |
| Common-Mode Input Range | Includes ground |
| 封装 | 14-SOIC |
| Package Width | 5.30 mm |
| Package Body Width | 0.209 inch |
| 安装类型 | Surface mount |
LM324ANSRG4 引脚配置
| 引脚 1 | OUT1 — Amplifier 1 output |
| 引脚 2 | IN1- — Amplifier 1 inverting input |
| 引脚 3 | IN1+ — Amplifier 1 non-inverting input |
| 引脚 4 | GND — Ground connection |
| 引脚 5 | IN2+ — Amplifier 2 non-inverting input |
| 引脚 6 | IN2- — Amplifier 2 inverting input |
| 引脚 7 | OUT2 — Amplifier 2 output |
| 引脚 8 | OUT3 — Amplifier 3 output |
| 引脚 9 | IN3- — Amplifier 3 inverting input |
| 引脚 10 | IN3+ — Amplifier 3 non-inverting input |
| 引脚 11 | GND — Ground connection |
| 引脚 12 | IN4+ — Amplifier 4 non-inverting input |
| 引脚 13 | IN4- — Amplifier 4 inverting input |
| 引脚 14 | OUT4 — Amplifier 4 output |
典型应用
LM324ANSRG4 适用于 6 应用s: Sensor Signal Conditioning, Industrial Control Loops, Audio Preamplifier Buffers, Active Filter and Equalization, Battery-Powered Measurement, Test and Measurement Buffering.
Sensor Signal Conditioning
The LM324ANSRG4 is well suited to conditioning low-frequency sensor outputs because its common-mode input range includes ground and its four amplifier sections can support buffering, scaling, and filtering. A 1.2 MHz gain-bandwidth product is ample for common temperature, pressure, and position sensors when the closed-loop bandwidth is well below that value. The typical 0.8 mA supply-current drain also benefits low-power sensing nodes. Place the active device close to the sensor connector to minimize pickup on high-impedance traces, then use grounded or referenced feedback networks appropriate to the sensor output.
推荐
Industrial Control Loops
LM324ANSRG4 can implement slow industrial control and monitoring functions where four analog channels are required on a compact board. Its four-circuit 14-SOIC package simplifies feedback networks for PID-style error amplifiers, actuator drivers, threshold comparators, and active stages. The 1.2 MHz gain-bandwidth product is suitable for control loops whose closed-loop bandwidth remains much lower, while the ground-inclusive common-mode range supports circuits operating from a single positive supply. Check output-current, output-swing, and stability requirements for each specific load before finalizing the analog front end.
推荐
Audio Preamplifier Buffers
The four independent amplifier sections in LM324ANSRG4 can buffer multiple low-frequency audio channels, such as microphone, line-level, and headphone-driver stages in general-purpose equipment. Its 1.2 MHz gain-bandwidth product supports modest-bandwidth audio preamplification, while the common-mode range including ground helps simplify single-supply signal paths. Configure each section with stable feedback and suitable source and load impedances, and confirm output swing before the design is accepted. The device is appropriate for general audio tasks rather than high-bandwidth or low-noise audiophile requirements.
推荐
Active Filter and Equalization
LM324ANSRG4 can implement first- and second-order active-filter sections because four amplifiers provide flexible buffering and gain distribution in a single 14-SOIC package. Its 1.2 MHz nominal gain-bandwidth product gives ample closed-loop bandwidth for many low-frequency measurement, communication, and audio equalization networks. The common-mode input range including ground is useful in single-supply filter designs, although component tolerances can dominate passive-corner accuracy. Verify the selected capacitors and resistors against the manufacturer's recommended operating region and avoid relying on amplifier slew rate for unexpectedly high-frequency signals.
推荐
Battery-Powered Measurement
LM324ANSRG4 is suitable for low-power measurement front ends where each of the four amplifier sections can buffer or amplify a modest-bandwidth signal. The typical 0.8 mA supply-current drain supports efficient operation when the source impedance and feedback values do not require additional bias current. Its ground-inclusive common-mode input range simplifies interfaces to sensors operating near 0 V. In battery designs, include local supply bypassing, control the enable state at the system level, and confirm the device's quiescent and output-current behavior over the intended temperature range using the manufacturer datasheet.
推荐
Test and Measurement Buffering
The LM324ANSRG4 can provide four input or output buffers for general-purpose test equipment, educational instrumentation, and low-frequency measurement interfaces. A 1.2 MHz gain-bandwidth product supports instrumentation signals within the amplifier's moderate operating range, while the common-mode input range includes ground simplifies zero-centered or near-ground measurements. The four-section 14-SOIC package reduces board area and assembly count in multi-channel fixtures. Use unity-gain stable configurations, maintain compatible source and load impedances, and verify noise, offset, and output-accuracy requirements when precision rather than generality is the primary goal.
推荐
推荐产品汇总
工程参考数据: LM324ANSRG4 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LM324AN | LM324AM | LM324AMX/NOPB | LM324AP | LM324A |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Number of Amplifier Circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz |
| Typical Supply Current Drain | 0.8 mA | 0.8 mA | 0.8 mA | 0.8 mA | 0.8 mA | 0.8 mA |
| Common-Mode Input Range | Includes ground | Includes ground | Includes ground | Includes ground | Includes ground | Includes ground |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
关键差异点
- Four general-purpose amplifier circuits in one package (对比 LM358)
- Ground-inclusive common-mode operation (对比 LM2902)
- Moderate bandwidth matched to general-purpose analog tasks (对比 LM324AN)
设计说明
Place the supply-bypass capacitor as close as practical to the power and ground pins, and route the return current through a low-impedance ground plane. The four amplifier sections share the same package supplies, so a shared supply perturbation can affect multiple channels simultaneously. Keep analog input and feedback traces away from switching-node and high-current paths, and use a solid ground reference beneath the 14-SOIC footprint.
Do not assume every unused amplifier section may be left open. Configure unused inputs according to the Texas Instruments LM324 datasheet, normally by tying the non-inverting input to a defined reference within the input common-mode range and the inverting input to the output. Leaving an input floating can allow interference to enter an unused high-impedance stage and may create unnecessary switching activity.
The LM324ANSRG4 has a 1.2 MHz gain-bandwidth product, so closed-loop bandwidth must remain comfortably below that limit and output slewing must satisfy the intended waveform. Use stable feedback ratios and check the source impedance, load capacitance, and selected noise-gain bandwidth. For source impedances above the recommended range, add a dedicated buffer instead of allowing bias-current error and offset to dominate the signal path.
Calculate the total package dissipation from the sum of output current and supply current across all four amplifier sections. The 0.8 mA value is the published typical supply-current drain, while actual consumption depends on supply voltage, output loading, input bias current, and operating state. For battery-powered designs, include the quiescent current of every populated channel and verify that the regulator can support the combined analog load.
合规信息
No definitive compliance declarations were identified in the accessible product information. The device is a general-purpose amplifier IC and is not identified as an AEC-Q100-qualified automotive part.