Texas Instruments

LM324KAN - 14-PDIP Quad Operational Amplifier | Texas Instruments

MPN: LM324KAN ✓ نشط
Single supply Vdss 14-pin PDIP, through hole Package
الحد الأدنى للطلب: 1 |

LM324KAN نظرة عامة

The Texas Instruments LM324KAN is a four-circuit general-purpose operational amplifier in a 14-pin PDIP package, designed for low-power operation from a single power supply across a wide voltage range. The device provides four independent amplifier sections in one package, making it suitable for general-purpose signal conditioning, buffering, voltage amplification, and feedback-control circuits. The LM324KAN is identified as the military-temperature-grade ordering option within the LM324 family.

An operational amplifier is an active analog device that amplifies the difference between its two inputs. The LM324 family belongs to the broader hierarchy of operational amplifiers, analog amplifiers, linear integrated circuits, and signal-chain semiconductors. Its single-supply capability allows operation from one positive rail and ground, although the complete electrical limits and common-mode behavior should be confirmed in the manufacturer datasheet before fixing system voltages.

The primary feature of the LM324KAN is its integration of four general-purpose amplifier channels into one 14-pin PDIP. This reduces component count and board area compared with four single-amplifier packages. The through-hole PDIP format also suits educational equipment, industrial control prototypes, audio projects, legacy instruments, and maintenance applications where socketed or hand-soldered installation is common.

Each amplifier section includes differential input and output connections arranged in a standard quad-op-amp layout. Pin 11 supplies the positive rail, pin 4 connects to the negative rail, and pins 1, 7, 8, and 14 provide the four outputs. Input pins 2 and 3, 5 and 6, 9 and 10, and 12 and 13 form the four differential input pairs. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks or socket connections.

Typical uses include audio preamplification, sensor-signal conditioning, low-frequency filtering, active feedback, sample-and-hold support, and general instrumentation. Because the LM324KAN is a general-purpose amplifier rather than a precision or high-speed device, its noise, input-bias-current, slew-rate, output-current, and input-offset-voltage characteristics should be checked against the signal amplitude, source impedance, bandwidth, and required accuracy of the design.

When designing around this device, check the maximum supply voltage and input common-mode range at the selected operating voltage. Decoupling capacitors should be placed close to the supply pins, and unused amplifier sections should be configured according to the manufacturer recommendations instead of being left floating. The DIP footprint also requires adequate spacing for through-hole insertion and soldering access.

This page combines device identification, pin-level guidance, application analysis, drop-in alternatives, and practical design notes to support schematic capture, PCB layout, sourcing, and legacy-product maintenance for the LM324KAN.

بدائل مباشرة لـ LM324KAN — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع LM324KAN (نفس عامل الشكل والبصمة) — يختلف في Amplifier Type, Mounting Type, Package, Architecture, Gain-Bandwidth Product.

Texas Instruments
Amplifier Type: Quad general-purpose operational amplifier
Mounting Type: Through-hole
Architecture: Independent, high-gain, internally frequency-compensated
قارن مع LM324KAN →
Texas Instruments
Mounting Type: Through-hole
Package: 14-pin PDIP
Gain-Bandwidth Product: 1.2 MHz
قارن مع LM324KAN →
Texas Instruments
Amplifier Type: General Purpose
Mounting Type: Surface Mount
Package: SOIC (D), 14 pins
قارن مع LM324KAN →

LM324AN

✅ بديل مباشر
Texas Instruments
📦 14-PDIP
General-purpose operational amplifier · 4 circuits · 4 outputs · 30 V · 1.2 MHz · 3 mV · Internally frequency-compensated · Single or dual supply

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM324BAIDR

✅ بديل مباشر
Texas Instruments
📦 14-PDIP
4 · 3 V to 36 V · 1.2 MHz · 2 mV (max, BA version) · Push-Pull · -40C to +85C · SOIC (D), 14 pins · Surface Mount

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM2902B

✅ بديل مباشر
📦 14-PDIP
Next-generation LM2902-family device with a 20 V to 36 V supply range versus the original LM324's wider general-purpose range

📋 بديل مرجعي (غير موجود في الكتالوج)

TL074CN

✅ بديل مباشر
📦 14-PDIP
JFET-input quad amplifier with lower input bias current than LM324KAN but a different input-bias-current and noise specification set

📋 بديل مرجعي (غير موجود في الكتالوج)

LM2902N

✅ بديل مباشر
Texas Instruments
📦 14-PDIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

تواصل لمعرفة السعر

عرض ورقة البيانات ←

LM324KAN الحدود القصوى والخصائص الكهربائية

Amplifier Type General-purpose operational amplifier
Number of Amplifiers 4 circuits
Architecture Quad operational amplifier
Supply Type Single supply
Temperature Grade Military grade (K grade)
العلبة 14-pin PDIP, through hole
عدد الأطراف 14 pins
نوع التركيب Through-hole PCB mounting

تكوين أطراف LM324KAN

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
دبوس 1 OUT 1 — Amplifier 1 output
دبوس 2 IN- 1 — Amplifier 1 inverting input
دبوس 3 IN+ 1 — Amplifier 1 non-inverting input
دبوس 4 V- — Negative power supply connection
دبوس 5 IN+ 2 — Amplifier 2 non-inverting input
دبوس 6 IN- 2 — Amplifier 2 inverting input
دبوس 7 OUT 2 — Amplifier 2 output
دبوس 8 OUT 3 — Amplifier 3 output
دبوس 9 IN- 3 — Amplifier 3 inverting input
دبوس 10 IN+ 3 — Amplifier 3 non-inverting input
دبوس 11 V+ — Positive power supply connection
دبوس 12 IN+ 4 — Amplifier 4 non-inverting input
دبوس 13 IN- 4 — Amplifier 4 inverting input
دبوس 14 OUT 4 — Amplifier 4 output

التطبيقات النموذجية

LM324KAN مناسب لـ 6 التطبيقs: General-Purpose Sensor Signal Conditioning, Audio Preamplification and Mixer Circuits, Industrial Control and Feedback Loops, Active Filters and Low-Frequency Equalization, Test and Measurement Instrumentation, Legacy Equipment Maintenance and Retrofit.

🧩

General-Purpose Sensor Signal Conditioning

The LM324KAN suits four-channel sensor-conditioning circuits where a single low-power package must amplify weak analog signals. Each of the four amplifier sections can buffer a sensor output before conversion by an ADC, reducing loading of the sensing element. Because the device operates from a single supply over a wide voltage range, it is practical in battery-powered instrumentation and industrial monitoring. Confirm the input common-mode limits for the selected rail and the required offset accuracy before using it for high-precision measurements.

🎧

Audio Preamplification and Mixer Circuits

The four independent channels of the LM324KAN can support small-signal audio preamplification, summing stages, and simple mixer functions. Its single-supply capability permits simple biasing from one positive rail and ground, while the PDIP package remains convenient for hobby, educational, and legacy equipment. Audio designs should check the device noise, slew rate, output swing, and stability into the selected load. For very low source impedances or high-gain stages, verify that the feedback network does not amplify input-bias-current errors.

🏭

Industrial Control and Feedback Loops

The LM324KAN can implement error amplifiers, comparators with hysteresis, and active feedback elements in industrial control boards. Its four channels allow a controller to use separate amplifiers for sensing, error amplification, and auxiliary signal conditioning. The military K-grade ordering option is relevant when the specified environmental range exceeds standard commercial conditions. Validate loop stability, output-current demand, and common-mode headroom across the full operating voltage and temperature range.

📻

Active Filters and Low-Frequency Equalization

The LM324KAN is useful in active low-pass, high-pass, and notch-filter stages where four amplifier channels can implement a complete filter network on one board. Its general-purpose architecture provides a cost-effective way to build analog equalization around a single supply. Keep component values within the recommended range and confirm that the closed-loop gain and load do not exceed the amplifier's stability and output-current limits. Decoupling near the supply pins reduces supply-noise coupling into the filtered signal path.

🖥️

Test and Measurement Instrumentation

The LM324KAN fits laboratory and legacy test equipment requiring buffering, summing, and gain stages around sensors and transducers. The through-hole 14-pin PDIP remains practical for socketed construction, repair, and prototype boards, and the four-channel arrangement simplifies inventory for multi-channel instruments. Confirm the grade-specific temperature range and input-offset specifications against the calibration budget. For precision measurements, compare these values with a precision amplifier family before fixing the measurement chain.

🔧

Legacy Equipment Maintenance and Retrofit

The LM324KAN is a practical replacement target for repairing industrial, educational, audio, and measurement equipment built around the original LM324 14-pin quad footprint. A same-family B-grade option can often be installed without redrawing the PCB when its electrical limits satisfy the original design. Perform a side-by-side review of supply voltage, input bias current, offset voltage, output swing, and temperature grade before substitution. Also confirm that the alternative is available in the required 14-pin PDIP configuration.

ملخص المنتجات الموصى بها

LM324AN Texas Instruments يُستخدم في: General-Purpose Sensor Signal Conditioning, Test and Measurement Instrumentation LM2902N Texas Instruments يُستخدم في: General-Purpose Sensor Signal Conditioning, Industrial Control and Feedback Loops, Legacy Equipment Maintenance and Retrofit TL074CN Quad amplifier alternative for audio signal chains يُستخدم في: Audio Preamplification and Mixer Circuits, Active Filters and Low-Frequency Equalization LM324B Next-generation same-family alternative يُستخدم في: Audio Preamplification and Mixer Circuits, Active Filters and Low-Frequency Equalization, Test and Measurement Instrumentation, Legacy Equipment Maintenance and Retrofit LM2902B Drop-in next-generation control amplifier يُستخدم في: Industrial Control and Feedback Loops, Legacy Equipment Maintenance and Retrofit
What is the LM324KAN?
The LM324KAN is a Texas Instruments four-circuit, general-purpose operational amplifier packaged in a 14-pin PDIP. It is designed for low-power operation from a single supply over a wide voltage range, according to the Texas Instruments LM324 product page. Its four independent channels are suitable for buffering, voltage amplification, sensor conditioning, and general feedback-control circuits where a low-cost, widely supported quad amplifier is preferred.
What is the pinout of LM324KAN?
The LM324KAN uses the standard 14-pin quad operational-amplifier arrangement: outputs are pins 1, 7, 8, and 14; inverting inputs are pins 2, 6, 9, and 13; non-inverting inputs are pins 3, 5, 10, and 12; V+ is pin 11; and V- is pin 4. Verify the assignments against the pin-description table in the Texas Instruments LM324 datasheet before laying out a socketed or new PCB footprint.
Where can I download the LM324KAN datasheet PDF?
The LM324KAN technical documentation is available from the Texas Instruments LM324 product page at https://www.ti.com/product/LM324. That page links the device family data sheet and ordering information for the military-grade K-grade option. The LM324KAN designation identifies a 14-pin PDIP orderable configuration, so use the package and temperature-grade tables when confirming that the documented ordering information matches the required mechanical variant.
How does the LM324KAN compare with the LM324N?
Both devices provide four general-purpose amplifier channels in a 14-pin PDIP, but the LM324KAN is the K-grade military-temperature ordering option while LM324N denotes the standard commercial-temperature version. The electrical-performance limits and temperature ranges should be compared in the Texas Instruments ordering table. Choose LM324KAN when the specified environmental range is required; use LM324N when standard commercial-temperature operation is sufficient.
Is the LM324KAN suitable for single-supply operation?
Yes. The Texas Instruments LM324 family is specifically designed for single-power-supply operation across a wide voltage range. In a single-supply circuit, pin 11 connects to the positive supply and pin 4 normally connects to ground. Confirm the selected supply voltage against the device supply and common-mode limits, and connect the unused amplifier inputs to a defined reference voltage to prevent unstable output behavior.
What is the best drop-in replacement for LM324KAN?
The closest same-family choices are the Texas Instruments LM324B and LM2902B, which the manufacturer describes as next-generation devices able to drop in for LM324-family parts. For a cross-brand substitute, the onsemi LM2902N uses a comparable 14-pin quad layout, but its temperature grade and electrical limits must be checked against the LM324KAN requirements. Board changes are unnecessary only when the complete pinout and electrical characteristics are confirmed.
What can replace LM324KAN on an existing PCB?
A replacement can be used on an existing PCB when it has the same 14-pin PDIP footprint, the same output and input pin assignments, and electrical ratings that meet the circuit requirements. The Texas Instruments LM324B and LM2902B are identified as drop-in options for LM324-family devices. The onsemi LM2902N is also a cross-brand candidate, although its grade, temperature range, bias current, and common-mode performance require review before substitution.
Is LM324KAN the same as LM324AN?
No. LM324KAN and LM324AN both denote 14-pin PDIP versions of the LM324 family, but the final letter identifies different device grades. LM324KAN is the K-grade military-temperature option, while LM324AN identifies the A-grade ordering option. A mechanical socket match does not by itself guarantee grade equivalence, so compare temperature range, electrical limits, and qualification requirements before treating the two as interchangeable.
LM324KAN vs LM2902B - which is better for industrial control?
Choose LM324KAN when a military-temperature-grade LM324-family device and the established LM324 electrical behavior are the primary requirements. Choose LM2902B when its next-generation electrical characteristics better match the control loop, particularly regarding noise, bias current, or supply range. The Texas Instruments LM324K product page identifies LM324B and LM2902B as drop-in options for LM324-family devices, so both can preserve the 14-pin footprint.
When should I choose LM324KAN over TL074CN?
Choose LM324KAN for a general-purpose design that specifically calls for the military-grade K option of the LM324 family. Choose TL074CN when its lower-noise characteristics, different input-bias behavior, or broader audio-oriented suitability better serves the signal chain. Both use a 14-pin quad-amplifier arrangement, but the two devices should not be treated as identical without reviewing offset voltage, bias current, slew rate, noise, and supply requirements.
Where can I buy LM324KAN online?
Use the Request a Quote form on this page to request LM324KAN pricing, stock confirmation, minimum order quantity, and current lead time from XAIPART. The form is the appropriate route for a commercial inquiry because component availability and order schedules can change quickly. Provide the 14-pin PDIP package requirement and any required military-temperature qualification details with the request.
What is the price of LM324KAN?
Current LM324KAN pricing is generated through the Request a Quote form on this page rather than published as a static value. Submit the exact MPN LM324KAN and the required quantity so the quote reflects current component availability, order breaks, and purchasing terms. Because pricing and stock can change by market and order quantity, request a formal quotation for production planning.
How long is the lead time for LM324KAN?
Request the current LM324KAN lead time through the Request a Quote form on this page. Lead time depends on confirmed inventory, manufacturer production status, purchase volume, and packaging requirements. Include the annual and per-order quantities in the request so the schedule can reflect your actual replenishment pattern rather than a generic single-unit estimate.
Is LM324KAN in stock?
Submit the LM324KAN MPN through the Request a Quote form on this page for a current availability response. The form can confirm stock allocation, scheduled factory supply, and the quantity available against your requested schedule. Because stock can change after a quotation is issued, treat the response as the current purchasing input and reconfirm before releasing a large production order.
What are the key specifications of LM324KAN that engineers should know?
The key LM324KAN identifiers are four amplifier circuits, a 14-pin PDIP package, general-purpose operation, single-supply capability, and a wide supply-voltage range. According to the Texas Instruments LM324 product page, the family is a low-power quad operational amplifier designed for single-supply operation. The ordering code also identifies the military K-grade variant, making temperature qualification a central selection criterion.
What are the common design mistakes when using LM324KAN?
The most common mistakes are applying an input signal outside the supported common-mode range, leaving an unused amplifier floating, and ignoring the supply-voltage limits during layout. Connect unused inputs to a defined reference, bypass the supply pins, and verify the maximum operating voltage against the intended rail. Also avoid assuming the general-purpose LM324 performance matches precision, low-noise, or high-speed amplifier families.

بيانات مرجعية هندسية لـ LM324KAN — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Select LM324KAN when the design requires a four-channel general-purpose amplifier, a 14-pin PDIP footprint, and the military K-grade ordering option. It is appropriate for legacy repair, industrial control, instrumentation, audio, and sensor-conditioning applications where the LM324 electrical behavior and through-hole construction are established. Choose LM324B when an existing board can benefit from lower input offset voltage and bias current while retaining the manufacturer-described drop-in path. Choose LM2902B when its next-generation characteristics suit the circuit, but verify its intended supply range. Choose TL074CN for a lower-bias JFET-input quad amplifier when its noise and bias behavior better match the signal chain. Choose the onsemi LM2902N for a cross-brand maintenance option only after checking the grade, temperature range, and electrical limits.

المقارنة مع البدائل

المعامل هذا المنتج LM324AN LM324B LM2902B TL074CN LM2902N
Package 14-PDIP 14-PDIP 14-PDIP 14-PDIP 14-PDIP 14-PDIP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi
Number of Amplifiers 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Architecture General-purpose operational amplifier General-purpose operational amplifier Next-generation LM324 family Next-generation LM2902 family JFET-input operational amplifier General-purpose operational amplifier
Supply Configuration Single-supply capable Single-supply capable Single-supply capable Single-supply capable Single-supply capable Single-supply capable
Pin Count 14 pins 14 pins 14 pins 14 pins 14 pins 14 pins
Drop-In Status Original 14-pin quad-amplifier device Same-family DIP alternative Manufacturer-described drop-in replacement Manufacturer-described drop-in replacement Pin-compatible quad-amplifier alternative Cross-brand pin-compatible alternative

أبرز الفروقات

  • K-grade ordering option for wider environmental requirements (مقابلLM2902N)
  • Four general-purpose channels in one 14-pin PDIP (مقابلTL074CN)
  • Manufacturer-described next-generation replacement path (مقابلLM324B)
  • Direct same-family DIP alternative (مقابلLM324AN)

ملاحظات التصميم

Confirm that the selected supply voltage, input signal range, and ambient temperature remain inside the LM324KAN electrical limits. The K ordering suffix identifies a military-grade option, so it should not be replaced with a commercial-grade part when environmental qualification matters. In single-supply designs, bias non-inverting inputs above ground when the signal would otherwise remain below the usable common-mode range.

Place the supply bypass capacitor close to pin 11 and the ground return close to pin 4, with a short and low-inductance connection path. Route differential input pairs away from switching nodes and high-current return paths. For the 14-pin PDIP, verify component-body clearance, solder-joint access, and whether a socket is needed for maintenance before finalizing the mechanical layout.

Check the quiescent current across all four amplifier sections and account for supply-current changes caused by output loading and input common-mode operation. Use a supply regulator with adequate current margin, especially if the same rail drives sensors, relays, or digital loads. Do not assume the package dissipates heat uniformly because each amplifier section may reach a different operating point.

Do not leave an unused amplifier section floating. Configure each unused channel as a voltage follower with its input tied to a defined reference within the common-mode range, following the manufacturer guidance. Also review noise-gain stability, maximum closed-loop gain, capacitive loading, and output-current limits before using the device in a new precision or high-gain circuit.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The LM324KAN is a military-grade general-purpose operational amplifier rather than an automotive-qualified device. Compliance status should be confirmed for the exact orderable configuration and current regulatory declarations.

تم التحقق من البيانات في: 2026-11-13 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

LM324KAN LM324KAN datasheet LM324KAN datasheet pdf LM324KAN pinout LM324KAN 14-PDIP LM324KAN equivalent LM324KAN replacement LM324KAN drop-in replacement LM324KAN vs LM324B Texas Instruments LM324KAN LM324KAN price LM324KAN stock LM324KAN military grade op amp LM324KAN quad operational amplifier LM324KAN sensor signal conditioning

المكونات والمصطلحات ذات الصلة

Texas Instruments LM324KAN LM324AN LM324B LM2902B TL074CN LM2902N onsemi operational amplifier quad operational amplifier general-purpose amplifier single-supply operation signal conditioning sensor amplification audio preamplification active filter feedback control common-mode range input offset voltage input bias current gain-bandwidth product PDIP-14 through-hole package military grade RoHS REACH
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر