LM324MT/NOPB - Quad 32V 1MHz Op Amp | Texas Instruments
MPN: LM324MT/NOPB ✓ نشطLM324MT/NOPB نظرة عامة
An operational amplifier, or op amp, is an analog signal-processing semiconductor that amplifies the difference between two input voltages. The LM324 belongs to the voltage-feedback operational-amplifier family within the broader amplifier IC and analog semiconductor hierarchy. Its four integrated amplifiers can handle independent channels or be interconnected for filtering, gain, buffering, comparison, and transducer-conditioning functions.
The quad configuration consolidates four amplifiers into one device, reducing board area and simplifying multi-channel designs. Key characteristics include a 32 V supply rating, 1 MHz gain-bandwidth product, internally frequency compensation, high voltage gain, and bipolar input and output stages. The manufacturer identifies the LM324 as a standard general-purpose amplifier intended for single-supply operation across a wide voltage range.
Internally, each channel uses a voltage-feedback architecture and internal frequency compensation, allowing operation without external compensation components. The four amplifiers share common supply and ground connections, so applications must keep return-current paths short and account for shared thermal behavior when all four channels operate at high output current. The 14-pin TSSOP outline supports compact surface-mount assembly.
Typical applications include industrial sensor conditioning, low-frequency audio paths, control-signal buffers, current-to-voltage conversion with external resistors, active filtering, and four-channel instrumentation. The 32 V supply capability is particularly useful in industrial systems where signal levels can exceed conventional low-voltage analog ranges.
When laying out a design, place each amplifier's input and feedback components close to the corresponding pins, keep ground returns short, and use a stable bypass capacitor near the supply pins. Account for input common-mode limits, output swing, load capability, and input bias-current errors when setting gain. Stable operation should also be checked across temperature, supply tolerance, and output-current variation.
This page combines the exact LM324MT/NOPB package and temperature information with practical design guidance, pin mapping, sourcing information, and qualified same-footprint alternatives. It is intended to help engineers evaluate the device for compact four-channel analog designs without overlooking the electrical limits of the LM324 architecture.
بدائل مباشرة لـ LM324MT/NOPB — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع LM324MT/NOPB (نفس عامل الشكل والبصمة) — يختلف في Package, Supply Configuration, Gain-Bandwidth Product, Amplifier Type, Frequency Compensation.
LM324PWRE4
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←LM324KPWR
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←LM324MPWR
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
LM324MT/NOPB الحدود القصوى والخصائص الكهربائية
| Amplifier Type | Quad voltage-feedback operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| Maximum Supply Voltage | 32 V |
| Gain-Bandwidth Product | 1 MHz |
| Supply Configuration | Single supply |
| نطاق درجة حرارة التشغيل | 0 °C to +70 °C |
| العلبة | 14-pin TSSOP (PW) |
| عدد الأطراف | 14 pins |
| نوع التركيب | Surface mount |
| Architecture | Voltage feedback |
| Input and Output Stage | Bipolar |
| Frequency Compensation | Internal |
| Product Classification | Standard general-purpose amplifier |
| حالة RoHS | Compliant |
| Lead-Free Finish | Yes |
| حالة دورة الحياة | Active |
تكوين أطراف LM324MT/NOPB
| دبوس 1 | OUT1 — Amplifier 1 output |
| دبوس 2 | IN1- — Amplifier 1 inverting input |
| دبوس 3 | IN1+ — Amplifier 1 non-inverting input |
| دبوس 4 | V+ — Positive supply connection |
| دبوس 5 | IN2+ — Amplifier 2 non-inverting input |
| دبوس 6 | IN2- — Amplifier 2 inverting input |
| دبوس 7 | OUT2 — Amplifier 2 output |
| دبوس 8 | OUT3 — Amplifier 3 output |
| دبوس 9 | IN3- — Amplifier 3 inverting input |
| دبوس 10 | IN3+ — Amplifier 3 non-inverting input |
| دبوس 11 | V- — Ground or negative supply connection |
| دبوس 12 | IN4+ — Amplifier 4 non-inverting input |
| دبوس 13 | IN4- — Amplifier 4 inverting input |
| دبوس 14 | OUT4 — Amplifier 4 output |
التطبيقات النموذجية
LM324MT/NOPB مناسب لـ 6 التطبيقs: Industrial Sensor Signal Conditioning, Audio Preamplifier and Mixer, Current-to-Voltage Conversion, Active Filtering and Control Loops, Battery-Powered Monitoring, General-Purpose Analog Interface.
Industrial Sensor Signal Conditioning
The LM324MT/NOPB fits low-frequency industrial sensor-conditioning circuits that require several amplification functions within a 0 °C to +70 °C equipment envelope. Its four voltage-feedback amplifier channels can implement buffering, differential amplification, gain stages, and active filtering, while the 1 MHz gain-bandwidth product is appropriate for slowly varying process signals rather than high-speed data acquisition. The 32 V supply rating also helps interface electronics operate from industrial-level supplies. Use the manufacturer datasheet to confirm input common-mode range, output swing, stability, and load limits for every sensor. Decoupling should be placed close to the shared supply pins, and each channel should use a quiet ground-return path to prevent coupling between adjacent sensors.
موصى به
Audio Preamplifier and Mixer
The LM324MT/NOPB can be used in modest audio preamplifier, summing, and mixing circuits when the signal bandwidth remains within its 1 MHz gain-bandwidth capability. Four amplifier channels allow several stages or balanced inputs to share one package, reducing component count and simplifying routing in a compact design. The voltage-feedback architecture supports conventional inverting and non-inverting configurations, while the 32 V maximum supply rating accommodates suitable bipolar audio rails. Audio performance still depends on resistor matching, load impedance, input bias current, and output-swing requirements. Confirm the usable output voltage and distortion characteristics in the manufacturer datasheet, and keep feedback loops short and stable for the selected gain and capacitance.
موصى به
Current-to-Voltage Conversion
The LM324MT/NOPB is suitable for current-to-voltage conversion in current-loop sensors where two amplifier channels can provide buffering or an active summing stage. Its 1 MHz gain-bandwidth product is more than adequate for many process-control and instrumentation signals, while four channels allow reference and monitoring functions to be integrated. The transimpedance network and its compensation capacitor must be selected from the exact gain, source capacitance, and bandwidth requirements. Input bias-current error, output range, and load capability remain important because they can dominate the accuracy of a high-gain conversion stage. Use a virtual-ground reference where appropriate and follow the manufacturer datasheet for common-mode voltage, output swing, and stability guidance.
موصى به
Active Filtering and Control Loops
The LM324MT/NOPB supports active low-pass, high-pass, and notch-filter implementations in control and measurement systems where modest bandwidth and four independent channels are sufficient. The 1 MHz gain-bandwidth product provides useful closed-loop capability for many power-frequency and industrial-control signals, while internal frequency compensation simplifies each amplifier stage. Component tolerances directly influence cutoff frequency and peak gain, so the resistor and capacitor network should be calculated against the desired transfer function rather than copied without adjustment. Confirm loop stability for the intended gain, capacitive load, and supply range in the manufacturer datasheet. Keep each filter's feedback network compact and connect the four channels to a common, low-impedance ground plane.
موصى به
Battery-Powered Monitoring
The LM324MT/NOPB can form part of a battery-powered monitoring system that uses each amplifier for sensing, comparison, or control of slow-changing conditions. Its low-power general-purpose design and single-supply architecture suit compact equipment, while the four channels reduce the number of separate amplifier packages needed. The 32 V maximum supply rating provides headroom for appropriately protected supply rails, although it does not permit unrestricted operation at that voltage without checking all datasheet conditions. Battery systems should evaluate quiescent current, input bias current, output loading, and supply-current behavior across the intended battery range. Use a low-leakage input network, local supply bypass, and a defined shutdown strategy if the monitor must consume minimal standby power.
موصى به
General-Purpose Analog Interface
The LM324MT/NOPB is well suited to general analog-interface boards requiring four buffered channels without the complexity of a high-speed amplifier. Typical uses include voltage scaling, impedance buffering, comparator-style threshold conditioning, and small-signal control amplification. Its 32 V supply rating, 1 MHz gain-bandwidth product, and internally compensated voltage-feedback channels cover many standard industrial and consumer interface tasks. The shared supply pins and ground connection make careful decoupling essential, especially when one channel drives a heavier load than the others. Before releasing the layout, verify input and output voltage limits, capacitive-load stability, output-current capability, and thermal behavior using the manufacturer datasheet. Avoid using this device where rail-to-rail input or output operation is mandatory.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ LM324MT/NOPB — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | LM324PWR | LM324KPWR | LM324MPWR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-pin TSSOP (PW) | 14-pin TSSOP (PW) | 14-pin TSSOP (PW) | 14-pin TSSOP (PW) |
| Amplifier Count | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Maximum Supply Voltage | 32 V | 32 V | 32 V | 32 V |
| Gain-Bandwidth Product | 1 MHz | 1 MHz | 1 MHz | 1 MHz |
| Architecture | Voltage feedback | Voltage feedback | Voltage feedback | Voltage feedback |
| Frequency Compensation | Internal | Internal | Internal | Internal |
| Supply Configuration | Single supply | Single supply | Single supply | Single supply |
أبرز الفروقات
- Exact orderable configuration (مقابلLM324PWR)
- Compact four-channel integration (مقابلLM324KPWR)
- Single-supply general-purpose architecture (مقابلLM324MPWR)
ملاحظات التصميم
Place the supply bypass capacitor and any additional high-frequency bypass capacitor directly between pins 4 and 11, with short ground paths. The four amplifiers share these supply pins, so routing distance matters across the entire TSSOP. Keep each amplifier's feedback resistors and compensation components close to pins 1-3, 5-7, 8-10, and 12-14 to minimize parasitic feedback and channel-to-channel coupling.
Do not assume that a 32 V maximum supply rating makes every input or output condition valid at 32 V. Verify input common-mode voltage, output swing, output-current capability, and power dissipation at the intended supply and load. The LM324MT/NOPB is rated from 0 °C to +70 °C, so it is not an automatic choice for extended-temperature industrial equipment without additional qualification.
Preserve a low-impedance ground reference around all four channels and route output currents away from sensitive input and feedback nodes. Although the device uses internal frequency compensation, excessive capacitive loading or high closed-loop gain can still affect stability. Check the intended load and feedback network against the manufacturer datasheet, and avoid long traces that increase capacitive loading at the amplifier outputs.
Estimate power dissipation from the actual output-current demand and voltage drop across each amplifier, then account for the shared package heat path. The TSSOP outline can dissipate heat effectively through its copper lands, but four channels operating near their output limits can heat the package and neighboring circuitry. Provide adequate copper area, keep thermal-sensitive components separated, and verify the hottest expected ambient condition.
معلومات الامتثال
The manufacturer part comparison identifies the LM324 family as RoHS compliant and lead-free. AEC-Q100 status, REACH status, halogen-free status, and conflict-minerals status are not established by the cited records.