Texas Instruments

LM324MT/NOPB - Quad 32V 1MHz Op Amp | Texas Instruments

Teilenummer: LM324MT/NOPB ✓ Aktiv
32 V Vdss 14-pin TSSOP (PW) Package Internal Speed
MOQ: 1 |

LM324MT/NOPB Übersicht

Texas Instruments LM324MT/NOPB is a low-power, quad operational amplifier with four amplifier circuits, a 32 V maximum supply rating, and 1 MHz gain-bandwidth performance in a 14-pin TSSOP package. The device is designed for general-purpose signal conditioning and operates from a single power supply over a wide voltage range.

An operational amplifier, or op amp, is an analog signal-processing semiconductor that amplifies the difference between two input voltages. The LM324 belongs to the voltage-feedback operational-amplifier family within the broader amplifier IC and analog semiconductor hierarchy. Its four integrated amplifiers can handle independent channels or be interconnected for filtering, gain, buffering, comparison, and transducer-conditioning functions.

The quad configuration consolidates four amplifiers into one device, reducing board area and simplifying multi-channel designs. Key characteristics include a 32 V supply rating, 1 MHz gain-bandwidth product, internally frequency compensation, high voltage gain, and bipolar input and output stages. The manufacturer identifies the LM324 as a standard general-purpose amplifier intended for single-supply operation across a wide voltage range.

Internally, each channel uses a voltage-feedback architecture and internal frequency compensation, allowing operation without external compensation components. The four amplifiers share common supply and ground connections, so applications must keep return-current paths short and account for shared thermal behavior when all four channels operate at high output current. The 14-pin TSSOP outline supports compact surface-mount assembly.

Typical applications include industrial sensor conditioning, low-frequency audio paths, control-signal buffers, current-to-voltage conversion with external resistors, active filtering, and four-channel instrumentation. The 32 V supply capability is particularly useful in industrial systems where signal levels can exceed conventional low-voltage analog ranges.

When laying out a design, place each amplifier's input and feedback components close to the corresponding pins, keep ground returns short, and use a stable bypass capacitor near the supply pins. Account for input common-mode limits, output swing, load capability, and input bias-current errors when setting gain. Stable operation should also be checked across temperature, supply tolerance, and output-current variation.

This page combines the exact LM324MT/NOPB package and temperature information with practical design guidance, pin mapping, sourcing information, and qualified same-footprint alternatives. It is intended to help engineers evaluate the device for compact four-channel analog designs without overlooking the electrical limits of the LM324 architecture.

Drop-in-Alternativen für LM324MT/NOPB – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LM324MT/NOPB (gleiche Bauform und Footprint) – abweichend in Package, Supply Configuration, Gain-Bandwidth Product, Amplifier Type, Frequency Compensation.

Texas Instruments
Package: 14-pin TSSOP
Supply Configuration: Single or dual supply
Gain-Bandwidth Product: 1.2 MHz
Texas Instruments
Package: 14-TSSOP
Amplifier Type: Quad operational amplifier
Texas Instruments
Package: 14-TSSOP
Supply Configuration: Single supply or split supply
Gain-Bandwidth Product: 1.2 MHz

LM324PWRE4

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 14-pin TSSOP (PW)
Quad general-purpose operational amplifier · 4 circuits · 4 independent amplifiers · 1.2 MHz · 1 V/us · Up to ±16 V (32 V total) · Single supply or split supply · Push-pull

Preis auf Anfrage

Datenblatt ansehen →

LM324KPWR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 14-pin TSSOP (PW)
4 circuits · Quad general-purpose operational amplifier · 30 V · 1.2 MHz · 2 kV · 14-pin TSSOP · 4.40 mm · Surface mount

Preis auf Anfrage

Datenblatt ansehen →

LM324MPWR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 14-pin TSSOP (PW)
Same 32 V maximum supply rating, 1 MHz gain-bandwidth product, and 14-pin TSSOP footprint, a 0% difference in the stated key ratings; temperature-grade ordering code differs.

📋 Referenzalternative (nicht im Katalog)

LM324MT/NOPB Grenzwerte & elektrische Eigenschaften

Amplifier Type Quad voltage-feedback operational amplifier
Number of Amplifier Circuits 4 circuits
Maximum Supply Voltage 32 V
Gain-Bandwidth Product 1 MHz
Supply Configuration Single supply
Betriebstemperaturbereich 0 °C to +70 °C
Gehäuse 14-pin TSSOP (PW)
Pin-Anzahl 14 pins
Montageart Surface mount
Architecture Voltage feedback
Input and Output Stage Bipolar
Frequency Compensation Internal
Product Classification Standard general-purpose amplifier
RoHS-Status Compliant
Lead-Free Finish Yes
Lebenszyklusstatus Active

LM324MT/NOPB Pin-Konfiguration

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pin 1 OUT1 — Amplifier 1 output
Pin 2 IN1- — Amplifier 1 inverting input
Pin 3 IN1+ — Amplifier 1 non-inverting input
Pin 4 V+ — Positive supply connection
Pin 5 IN2+ — Amplifier 2 non-inverting input
Pin 6 IN2- — Amplifier 2 inverting input
Pin 7 OUT2 — Amplifier 2 output
Pin 8 OUT3 — Amplifier 3 output
Pin 9 IN3- — Amplifier 3 inverting input
Pin 10 IN3+ — Amplifier 3 non-inverting input
Pin 11 V- — Ground or negative supply connection
Pin 12 IN4+ — Amplifier 4 non-inverting input
Pin 13 IN4- — Amplifier 4 inverting input
Pin 14 OUT4 — Amplifier 4 output

Typische Anwendungen

LM324MT/NOPB ist geeignet für 6 Anwendungs: Industrial Sensor Signal Conditioning, Audio Preamplifier and Mixer, Current-to-Voltage Conversion, Active Filtering and Control Loops, Battery-Powered Monitoring, General-Purpose Analog Interface.

🏭

Industrial Sensor Signal Conditioning

The LM324MT/NOPB fits low-frequency industrial sensor-conditioning circuits that require several amplification functions within a 0 °C to +70 °C equipment envelope. Its four voltage-feedback amplifier channels can implement buffering, differential amplification, gain stages, and active filtering, while the 1 MHz gain-bandwidth product is appropriate for slowly varying process signals rather than high-speed data acquisition. The 32 V supply rating also helps interface electronics operate from industrial-level supplies. Use the manufacturer datasheet to confirm input common-mode range, output swing, stability, and load limits for every sensor. Decoupling should be placed close to the shared supply pins, and each channel should use a quiet ground-return path to prevent coupling between adjacent sensors.

🎧

Audio Preamplifier and Mixer

The LM324MT/NOPB can be used in modest audio preamplifier, summing, and mixing circuits when the signal bandwidth remains within its 1 MHz gain-bandwidth capability. Four amplifier channels allow several stages or balanced inputs to share one package, reducing component count and simplifying routing in a compact design. The voltage-feedback architecture supports conventional inverting and non-inverting configurations, while the 32 V maximum supply rating accommodates suitable bipolar audio rails. Audio performance still depends on resistor matching, load impedance, input bias current, and output-swing requirements. Confirm the usable output voltage and distortion characteristics in the manufacturer datasheet, and keep feedback loops short and stable for the selected gain and capacitance.

⚡

Current-to-Voltage Conversion

The LM324MT/NOPB is suitable for current-to-voltage conversion in current-loop sensors where two amplifier channels can provide buffering or an active summing stage. Its 1 MHz gain-bandwidth product is more than adequate for many process-control and instrumentation signals, while four channels allow reference and monitoring functions to be integrated. The transimpedance network and its compensation capacitor must be selected from the exact gain, source capacitance, and bandwidth requirements. Input bias-current error, output range, and load capability remain important because they can dominate the accuracy of a high-gain conversion stage. Use a virtual-ground reference where appropriate and follow the manufacturer datasheet for common-mode voltage, output swing, and stability guidance.

🔧

Active Filtering and Control Loops

The LM324MT/NOPB supports active low-pass, high-pass, and notch-filter implementations in control and measurement systems where modest bandwidth and four independent channels are sufficient. The 1 MHz gain-bandwidth product provides useful closed-loop capability for many power-frequency and industrial-control signals, while internal frequency compensation simplifies each amplifier stage. Component tolerances directly influence cutoff frequency and peak gain, so the resistor and capacitor network should be calculated against the desired transfer function rather than copied without adjustment. Confirm loop stability for the intended gain, capacitive load, and supply range in the manufacturer datasheet. Keep each filter's feedback network compact and connect the four channels to a common, low-impedance ground plane.

📱

Battery-Powered Monitoring

The LM324MT/NOPB can form part of a battery-powered monitoring system that uses each amplifier for sensing, comparison, or control of slow-changing conditions. Its low-power general-purpose design and single-supply architecture suit compact equipment, while the four channels reduce the number of separate amplifier packages needed. The 32 V maximum supply rating provides headroom for appropriately protected supply rails, although it does not permit unrestricted operation at that voltage without checking all datasheet conditions. Battery systems should evaluate quiescent current, input bias current, output loading, and supply-current behavior across the intended battery range. Use a low-leakage input network, local supply bypass, and a defined shutdown strategy if the monitor must consume minimal standby power.

🧩

General-Purpose Analog Interface

The LM324MT/NOPB is well suited to general analog-interface boards requiring four buffered channels without the complexity of a high-speed amplifier. Typical uses include voltage scaling, impedance buffering, comparator-style threshold conditioning, and small-signal control amplification. Its 32 V supply rating, 1 MHz gain-bandwidth product, and internally compensated voltage-feedback channels cover many standard industrial and consumer interface tasks. The shared supply pins and ground connection make careful decoupling essential, especially when one channel drives a heavier load than the others. Before releasing the layout, verify input and output voltage limits, capacitive-load stability, output-current capability, and thermal behavior using the manufacturer datasheet. Avoid using this device where rail-to-rail input or output operation is mandatory.

Zusammenfassung der empfohlenen Produkte

LM324PWR Same-family quad TSSOP op amp for sensor-conditioning review Verwendet in: Industrial Sensor Signal Conditioning, Audio Preamplifier and Mixer, Current-to-Voltage Conversion, Battery-Powered Monitoring, General-Purpose Analog Interface LM324KPWR Texas Instruments Verwendet in: Industrial Sensor Signal Conditioning, Audio Preamplifier and Mixer, Active Filtering and Control Loops, Battery-Powered Monitoring LM324MPWR Same-family quad TSSOP amplifier for transimpedance review Verwendet in: Current-to-Voltage Conversion, Active Filtering and Control Loops, General-Purpose Analog Interface
What is LM324MT/NOPB?
The LM324MT/NOPB is a Texas Instruments quad general-purpose operational amplifier packaged in a 14-pin TSSOP. It contains four voltage-feedback amplifier circuits, supports a maximum supply voltage of 32 V, and provides a 1 MHz gain-bandwidth product. According to the Texas Instruments LM324 product page, the family is designed for single-power-supply operation across a wide voltage range.
What is the operating voltage of LM324MT/NOPB?
The LM324MT/NOPB supports operation from a single supply with a maximum rating of 32 V. Its exact minimum operating supply and usable common-mode range must be taken from the manufacturer datasheet for the selected configuration. According to Texas Instruments, the LM324 family is intended for low-power, wide-supply-range general-purpose operation rather than a narrowly fixed supply voltage.
Where can I find the LM324MT/NOPB pinout?
The LM324MT/NOPB pinout is documented in the pin-description table of the Texas Instruments LM324 datasheet and on the manufacturer product page. The device has 14 pins in a TSSOP package: four amplifier channels share pins 4 and 11 for supply and ground. Use the pin-description table when assigning input, output, feedback, bypass, and layout connections.
Where can I download the LM324MT/NOPB datasheet PDF?
The official LM324MT/NOPB documentation is available through the Texas Instruments LM324 product page at https://www.ti.com/product/LM324. The manufacturer page identifies LM324MT/NOPB as a 32 V, 1 MHz quad operational amplifier in the 14-pin PW TSSOP package. Use the manufacturer's data sheet for the definitive electrical limits, recommended operating conditions, and package drawings.
What are the key specifications of LM324MT/NOPB that engineers should know?
The key LM324MT/NOPB specifications are four amplifier circuits, a 32 V maximum supply rating, a 1 MHz gain-bandwidth product, internal frequency compensation, and a 14-pin TSSOP package. According to Texas Instruments, the LM324 is a low-power, general-purpose voltage-feedback amplifier designed for single-supply operation. Its 0 °C to +70 °C temperature grade makes it intended for commercial-temperature equipment.
What is the gain-bandwidth product of LM324MT/NOPB?
The LM324MT/NOPB has a 1 MHz gain-bandwidth product, as identified by Texas Instruments for this quad operational-amplifier family. This bandwidth supports low-frequency signal conditioning and general closed-loop amplification tasks. It is not a high-speed op-amp selection, so applications requiring wideband video, RF, or fast pulse processing should evaluate devices with substantially higher bandwidth.
Where can I buy LM324MT/NOPB online?
The LM324MT/NOPB can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for current pricing, stock, quantity requirements, and lead time. The manufacturer identifies LM324MT/NOPB as an active 14-pin TSSOP quad operational amplifier rated for 0 °C to +70 °C.
What is the price of LM324MT/NOPB?
Current LM324MT/NOPB pricing is available through the Request a Quote form on this page. The requested quantity, delivery target, and supply conditions determine the final commercial terms. The part is identified by Texas Instruments as an active 32 V, 1 MHz quad operational amplifier in a 14-pin TSSOP package.
What is the lead time for LM324MT/NOPB?
The current lead time for LM324MT/NOPB should be requested through the Request a Quote form on this page, together with the required quantity and delivery schedule. The manufacturer lists the device as active in a 14-pin PW TSSOP package. Its four-amplifier configuration can simplify multichannel designs by consolidating several amplifier functions into one component.
Is LM324MT/NOPB in stock?
Current LM324MT/NOPB inventory status should be confirmed through the Request a Quote form on this page. Supply availability can vary with order quantity, date code, and packaging configuration. Texas Instruments identifies the component as active and specifies the 14-pin TSSOP package with a 0 °C to +70 °C operating-temperature range.
What can replace LM324MT/NOPB?
The closest qualified replacement is a pin-compatible LM324-family device in the same 14-pin TSSOP footprint, with the required supply, temperature, output-load, and common-mode ratings checked before substitution. The LM324PWR and LM324KPWR are same-family TSSOP options identified for this page. A cross-brand replacement should be accepted only after its full electrical characteristics and package drawing have been compared.
Is LM324MT/NOPB the same as LM324PWR?
The LM324MT/NOPB and LM324PWR are both LM324-family quad amplifiers, but their ordering codes indicate different package or grade details that must be checked against the PCB and environmental requirements. The LM324MT/NOPB is a 14-pin TSSOP in the 0 °C to +70 °C range. The LM324PWR can be considered only after confirming the exact temperature grade and pin mapping.
When should I choose LM324MT/NOPB over LM324PWR?
Choose the LM324MT/NOPB when the design requires the exact Texas Instruments ordering code, a 14-pin TSSOP footprint, and the stated 0 °C to +70 °C operating range. LM324PWR may be relevant when a broader LM324-family procurement option is acceptable and its exact grade, temperature limits, and orderable package configuration satisfy the product requirements.
Is LM324MT/NOPB suitable for industrial sensor conditioning?
The LM324MT/NOPB can suit low-frequency industrial sensor-conditioning designs that stay within its 0 °C to +70 °C commercial-temperature range and electrical limits. Its four internal amplifiers support current-to-voltage conversion, buffering, gain stages, and active filtering. The 32 V supply rating is useful for industrial interfaces, but every amplifier and protection component must remain within its specified common-mode and output limits.
What is the best cross-brand equivalent for LM324MT/NOPB?
No cross-brand drop-in equivalent is established here solely from generic cross-reference pages. A valid substitute must use the same 14-pin TSSOP land pattern, preserve the four-amplifier pin assignments, and meet the 32 V supply, 1 MHz bandwidth, temperature, common-mode, output-swing, and load requirements. Texas Instruments LM324-family TSSOP options are safer starting points for review than an unverified cross-brand substitution.
LM324MT/NOPB vs LM324KPWR: which is better for a 70 °C design?
The LM324MT/NOPB is explicitly identified for operation from 0 °C to +70 °C, making it the clearer choice for a design whose guaranteed commercial-temperature envelope ends at 70 °C. LM324KPWR may be appropriate when its exact temperature rating exceeds the required range, but the two must not be treated as identical without reviewing the manufacturer ordering information, datasheet limits, and package details.

Technische Referenzdaten für LM324MT/NOPB – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose LM324MT/NOPB when the PCB uses a 14-pin TSSOP footprint, the design needs four general-purpose amplifier channels, and the required operating range is within 0 °C to +70 °C. Its 32 V supply rating and 1 MHz gain-bandwidth product fit low-frequency industrial, audio, monitoring, and analog-interface circuits. LM324PWR can be evaluated as a same-family sourcing alternative when its exact grade and temperature limits meet the product specification. LM324KPWR may be preferable when its manufacturer-defined temperature rating covers a wider operating environment, while LM324MPWR should likewise be selected only after checking its grade-specific limits. Do not use SOIC-package LM324 variants on a TSSOP land pattern without a board redesign. Confirm input common-mode range, output swing, load stability, bias-current effects, power dissipation, and exact orderable part number before releasing production files.

Vergleich mit Alternativen

Parameter Dieses Produkt LM324PWR LM324KPWR LM324MPWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-pin TSSOP (PW) 14-pin TSSOP (PW) 14-pin TSSOP (PW) 14-pin TSSOP (PW)
Amplifier Count 4 circuits 4 circuits 4 circuits 4 circuits
Maximum Supply Voltage 32 V 32 V 32 V 32 V
Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz 1 MHz
Architecture Voltage feedback Voltage feedback Voltage feedback Voltage feedback
Frequency Compensation Internal Internal Internal Internal
Supply Configuration Single supply Single supply Single supply Single supply

Wichtigste Unterscheidungsmerkmale

  • Exact orderable configuration (vs. LM324PWR)
  • Compact four-channel integration (vs. LM324KPWR)
  • Single-supply general-purpose architecture (vs. LM324MPWR)

Designhinweise

Place the supply bypass capacitor and any additional high-frequency bypass capacitor directly between pins 4 and 11, with short ground paths. The four amplifiers share these supply pins, so routing distance matters across the entire TSSOP. Keep each amplifier's feedback resistors and compensation components close to pins 1-3, 5-7, 8-10, and 12-14 to minimize parasitic feedback and channel-to-channel coupling.

Do not assume that a 32 V maximum supply rating makes every input or output condition valid at 32 V. Verify input common-mode voltage, output swing, output-current capability, and power dissipation at the intended supply and load. The LM324MT/NOPB is rated from 0 °C to +70 °C, so it is not an automatic choice for extended-temperature industrial equipment without additional qualification.

Preserve a low-impedance ground reference around all four channels and route output currents away from sensitive input and feedback nodes. Although the device uses internal frequency compensation, excessive capacitive loading or high closed-loop gain can still affect stability. Check the intended load and feedback network against the manufacturer datasheet, and avoid long traces that increase capacitive loading at the amplifier outputs.

Estimate power dissipation from the actual output-current demand and voltage drop across each amplifier, then account for the shared package heat path. The TSSOP outline can dissipate heat effectively through its copper lands, but four channels operating near their output limits can heat the package and neighboring circuitry. Provide adequate copper area, keep thermal-sensitive components separated, and verify the hottest expected ambient condition.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Yes
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer part comparison identifies the LM324 family as RoHS compliant and lead-free. AEC-Q100 status, REACH status, halogen-free status, and conflict-minerals status are not established by the cited records.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

lm324mt nopb LM324MT/NOPB datasheet LM324MT/NOPB pinout LM324MT/NOPB datasheet pdf LM324MT/NOPB equivalent LM324MT/NOPB replacement LM324MT/NOPB TSSOP LM324MT/NOPB schematic LM324MT/NOPB price LM324MT/NOPB stock Texas Instruments LM324MT/NOPB LM324MT/NOPB vs LM324PWR LM324MT/NOPB sensor conditioning LM324MT/NOPB 32V 1MHz

Verwandte Bauteile & Begriffe

Texas Instruments LM324MT/NOPB LM324PWR LM324KPWR LM324MPWR LM324 operational amplifier op amp quad amplifier voltage-feedback amplifier analog amplifier IC semiconductor single-supply operation gain-bandwidth product 1 MHz 32 V internal frequency compensation bipolar input and output stages 14-pin TSSOP TSSOP package family surface mount SMD industrial sensor conditioning audio preamplifier active filtering RoHS AEC-Q100 REACH
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen