Texas Instruments

LM358BPX - Dual 36V 1.2MHz Op Amp | Texas Instruments

MPN: LM358BPX ✓ نشط
36 V Vdss 10 nA Id 8-VFBGA Package
الحد الأدنى للطلب: 1 |

LM358BPX نظرة عامة

The Texas Instruments LM358BPX is a dual, general-purpose operational amplifier with two independent channels, a 36 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and an 8-ball VFBGA package. The device combines a 3 mV input-offset-voltage rating with a 0.5 V/us slew rate, making it suitable for low-to-moderate-speed analog signal conditioning, feedback-control loops, and general-purpose amplification.

An operational amplifier is an analog integrated circuit that uses high-gain differential feedback to amplify the difference between two input voltages. The LM358 belongs to the operational-amplifier hierarchy, which includes voltage-feedback amplifiers, signal-conditioning ICs, and analog front-end components. Its two independent channels permit simultaneous processing of related signals without requiring two separate single-channel packages.

The principal LM358B-family characteristics include operation from a single supply or from split positive and negative supplies, a 1.2 MHz unity-gain bandwidth, a 0.5 V/us slew rate, and a 3 mV maximum input-offset voltage. According to the TI LM358B product page, the commercial-temperature family operates from -40°C to 85°C. These characteristics place the amplifier between precision low-noise amplifiers and high-speed operational amplifiers: it offers useful DC accuracy and common-mode flexibility without the bandwidth of a high-speed comparator or precision amplifier.

Each channel includes one input stage, an output stage, and compensation circuitry. The two amplifiers are independent rather than internally linked, allowing the same package to implement independent gain stages, comparators, buffers, or transducers. The 0.5 V/us slew rate limits how quickly a large output transition can occur, while the 1.2 MHz gain-bandwidth product limits closed-loop bandwidth as feedback gain increases. A practical gain-bandwidth relationship of 1.2 MHz divided by noise gain gives a useful first estimate of usable bandwidth.

Typical uses include temperature-sensor signal conditioning, audio preamplification, DC motor-current monitoring, industrial sensor interfaces, low-frequency active filters, and power-supply feedback. For sensor applications, the 3 mV offset specification is important because input-referred offset appears directly at the amplifier output after multiplication by the closed-loop noise gain. In AC-coupled audio paths, the slew rate and bandwidth determine whether large low-frequency signals can be reproduced without excessive distortion.

PCB design should prioritize short input and feedback paths, a stable output connection, and careful bypassing of the positive supply. Because the LM358BPX uses a compact ball-grid package, the manufacturer land pattern and pin-description table should govern assembly and inspection. Decoupling capacitors should be placed close to the supply and ground balls, while analog input traces should be kept away from switching nodes and high-current return paths.

This page combines the LM358B family electrical characteristics, LM358BPX package information, pin assignments, verified source links, and practical guidance for analog-board design. It also identifies the limits of direct substitution: many LM358 equivalents use DIP or SOIC packages rather than the LM358BPX 8-ball VFBGA footprint, so a functional match does not necessarily qualify as a PCB drop-in replacement.

بدائل مباشرة لـ LM358BPX — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

LM358BPX الحدود القصوى والخصائص الكهربائية

Number of Channels 2 channels
Amplifier Type Dual general-purpose operational amplifier
Maximum Supply Voltage 36 V
Gain-Bandwidth Product 1.2 MHz
Input Offset Voltage 3 mV maximum
Slew Rate 0.5 V/us
Input Bias Current 10 nA
درجة حرارة التشغيل -40°C to 85°C
العلبة 8-VFBGA
Terminal Count 8 terminals
نوع التركيب Surface mount
Package Shape Square
حالة RoHS unknown
REACH Status unknown

تكوين أطراف LM358BPX

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
دبوس 1 OUT A — Channel A output
دبوس 2 IN A- — Channel A inverting input
دبوس 3 IN A+ — Channel A non-inverting input
دبوس 4 V- — Negative supply connection
دبوس 5 IN B+ — Channel B non-inverting input
دبوس 6 IN B- — Channel B inverting input
دبوس 7 OUT B — Channel B output
دبوس 8 V+ — Positive supply connection

التطبيقات النموذجية

LM358BPX مناسب لـ 6 التطبيقs: Industrial Sensor Signal Conditioning, Audio Preamplification and Buffering, Power-Supply Feedback and Control, Temperature and Pressure Transducer Interface, Low-Frequency Active Filters, Motor Current Monitoring.

🏭

Industrial Sensor Signal Conditioning

The LM358BPX fits low-frequency current, voltage, and resistive sensor interfaces because each channel provides a 1.2 MHz gain-bandwidth product, 10 nA input-bias current, and a 36 V maximum supply rating. One channel can amplify a sensor signal while the other forms a buffer, gain stage, or active filter. Its 3 mV input-offset rating matters at higher noise gains, where offset error is multiplied by the closed-loop gain. The principal design check is common-mode range: the selected supply arrangement must keep both input pins inside the amplifier’s permitted operating region.

🎧

Audio Preamplification and Buffering

The LM358BPX is appropriate for modest-bandwidth audio preamplifier and buffering stages requiring two independent channels. A 1.2 MHz gain-bandwidth product provides useful response well above the audio band, while the 0.5 V/us slew rate constrains large-amplitude transitions. For microphone or line-level inputs, configure each channel with feedback resistors, bypass the supply near pins 8 and 4, and keep input traces short. Verify output swing against the chosen single-supply level and use input coupling capacitors when the source is biased around ground.

⚡

Power-Supply Feedback and Control

LM358BPX can monitor a regulated rail or participate in a low-frequency feedback loop because the 1.2 MHz gain-bandwidth product is substantially above typical control-loop bandwidth and the device supports supply operation up to 36 V. One channel may amplify a divided feedback voltage, while the other compares or amplifies the error signal. Compensation must be chosen around the actual amplifier bandwidth, output loading, and power-stage characteristics rather than around the 0.5 V/us slew rate alone. Decoupling and layout remain essential because injected supply ripple can otherwise appear as output disturbance.

🌡️

Temperature and Pressure Transducer Interface

The LM358BPX supports resistive temperature-sensor and pressure-transducer interfaces where low input bias and moderate bandwidth are useful. Its 10 nA input-bias current produces less loading on high-resistance sensing elements than a general-purpose bipolar input with higher bias current. One channel can provide excitation buffering while the other amplifies the differential output. The 3 mV offset rating must be included in total error analysis, particularly at high gain or when the bridge excitation is low. The 36 V supply ceiling also allows operation from industrial rails when the common-mode limits are respected.

🔧

Low-Frequency Active Filters

The two LM358BPX channels can implement a second-order Sallen-Key filter or two separate first-order sections. At a noise gain of 10, the 1.2 MHz gain-bandwidth product implies a first-order gain-bandwidth limit of approximately 120 kHz, before allowing additional margin for component tolerances and phase error. The 0.5 V/us slew rate also affects large-signal behavior, particularly at low frequencies and high output amplitude. Because the package is compact, place input and feedback components close to their associated balls and avoid routing sensitive filter nodes beneath digital or switching circuitry.

🏭

Motor Current Monitoring

The LM358BPX can amplify a low-voltage motor-current-shunt signal in industrial or appliance control systems. Its 36 V maximum supply rating provides headroom for operation from a 24 V rail, and the 1.2 MHz bandwidth is well above typical motor-current control bandwidths. The shunt amplifier must preserve the common-mode voltage presented to the inputs, so the shunt placement and amplifier supply configuration need to be evaluated together. The 3 mV offset becomes a shunt-voltage error after gain multiplication; specify an appropriate shunt resistance and gain to preserve useful measurement resolution.

ملخص المنتجات الموصى بها

LM2902N/PB Texas Instruments يُستخدم في: Industrial Sensor Signal Conditioning, Audio Preamplification and Buffering, Temperature and Pressure Transducer Interface, Motor Current Monitoring LM358 Original dual operational-amplifier family يُستخدم في: Industrial Sensor Signal Conditioning, Audio Preamplification and Buffering, Power-Supply Feedback and Control, Low-Frequency Active Filters, Motor Current Monitoring
What are the key specifications of LM358BPX that engineers should know?
The LM358BPX is a dual general-purpose operational amplifier rated for up to 36 V, with a 1.2 MHz gain-bandwidth product, 3 mV maximum input offset, 0.5 V/us slew rate, and 10 nA input-bias current. According to the TI LM358B product page, the family operates from -40°C to 85°C. It is packaged in an 8-ball VFBGA and provides two independent amplifier channels.
Where can I download the LM358BPX or LM358B datasheet PDF?
The official LM358B datasheet is available through the TI product page linked on this page, while the LM358BPX ordering information appears on the TI LM358B product page. The part is described as a low-power dual operational amplifier in a 25-page National Semiconductor document. Use the manufacturer's ordering table to confirm the exact 8-VFBGA pin and ball assignments before layout release.
What is the LM358BPX pinout and pin arrangement?
The LM358BPX uses the standard eight-pin dual-op-amp arrangement: pin 1 is output A, pins 2 and 3 are inputs A− and A+, pin 4 is negative supply, pin 5 is the non-inverting input for channel B, pin 6 is the inverting input for channel B, pin 7 is output B, and pin 8 is positive supply. Use the manufacturer datasheet's 8-VFBGA ball map when assigning PCB lands because package orientation is critical.
Is LM358BPX suitable for 24V industrial signal conditioning?
The LM358BPX is suitable for many 24V industrial signal-conditioning circuits because the LM358B family has a 36 V maximum supply rating. The 1.2 MHz gain-bandwidth product supports low-frequency closed-loop operation, and the 10 nA input-bias current is useful with high-impedance sensors. Input and output common-mode limits must still be checked against the actual supply voltage and sensor node voltage.
How does LM358BPX compare with the original LM358?
The LM358BPX belongs to the LM358B family, which is specified for a 1.2 MHz gain-bandwidth product and 3 mV input-offset voltage. The TI LM358 product page identifies the original LM358 as a dual 30 V, 700 kHz amplifier. The newer B family therefore provides roughly 71% more gain-bandwidth and supports a higher stated maximum supply voltage, subject to package-specific ordering details.
What is the difference between LM358BPX and LM358B?
LM358BPX is a specific orderable LM358B-family configuration in an 8-VFBGA package, while LM358B is the family designation used on the TI product page. The family page identifies 36 V operation, 1.2 MHz bandwidth, and a -40°C to 85°C commercial-temperature range. Package, grade, and ordering suffixes must therefore be checked against the device used in the original design.
LM358BPX vs LM2904 — which is better for a drop-in redesign?
LM358BPX may be preferable when the redesign must retain the exact 8-VFBGA footprint and the LM358B family's 1.2 MHz bandwidth and 36 V rating. LM2904 is a commonly compared dual amplifier, but the available cross-reference information does not establish that it uses the same 8-ball package. Treat LM2904 as a functional comparison candidate unless its manufacturer confirms an identical ball map and land pattern.
When should I choose LM358BPX over another dual operational amplifier?
Choose LM358BPX when an existing PCB uses its 8-VFBGA footprint and the design needs two independent, general-purpose channels with a 1.2 MHz gain-bandwidth product. It is especially appropriate for industrial sensors, audio preamplification, and low-frequency feedback loops where a 36 V maximum supply and 10 nA input-bias current are useful. Choose another amplifier only after confirming package compatibility, common-mode range, output swing, and stability requirements.
What can replace LM358BPX on the same PCB?
No directly verified drop-in replacement for the LM358BPX 8-VFBGA footprint is established by the available manufacturer and cross-reference information. Common LM358 alternatives such as LM2904, LMV358, MC1458, and NE5532 can be functionally similar, but many use DIP or SOIC packages. Because those packages require a different PCB footprint, they are not drop-in replacements without a board redesign.
Is the LM358B family pin-compatible with the LM358 family?
The LM358B and LM358 families use the conventional dual-op-amp signal arrangement, but package compatibility must be evaluated separately from electrical compatibility. The LM358BPX is ordered in an 8-VFBGA package, while LM358-family devices are also offered in other package formats. A board change is therefore required when the original footprint is BGA and the proposed alternative uses leads.
Where can I buy LM358BPX online?
Use the Request a Quote form on this page to request LM358BPX availability, current commercial terms, and a manufacturing quote. The form is the appropriate channel for exact-part sourcing without relying on stale catalog information. When submitting the request, specify the 8-VFBGA package, quantity, target date, and whether reel, tray, or another approved delivery format is required.
What is the price of LM358BPX?
The current commercial price for LM358BPX is obtained through the Request a Quote form on this page. Quote requests preserve the exact LM358BPX order code and let purchasing confirm volume breaks, assembly format, and current supply status. Do not substitute a generic LM358 price because package and orderable suffix differences can affect availability and commercial terms.
What is the lead time and stock status for LM358BPX?
The current lead time and stock status for LM358BPX should be confirmed through the Request a Quote form on this page. Include the required quantity, target date, and packaging preference with the request. This avoids presenting an unverifiable availability claim for an exact 8-VFBGA order code and lets the commercial team respond with a part-specific schedule.
How much power does LM358BPX dissipate in a dual-amplifier circuit?
Power dissipation is approximately the sum of the two channel quiescent currents multiplied by the total supply voltage, plus load-dependent output dissipation. The exact calculation requires the manufacturer quiescent-current value, supply voltage, output voltage, and load current for each channel. Use the datasheet quiescent-current specification and thermal data rather than estimating from the 3 mV offset or 1.2 MHz bandwidth figures.
Is LM358BPX qualified for automotive AEC-Q100 applications?
The LM358BPX ordering information identifies a commercial-temperature configuration, while AEC-Q100 qualification must be established from the specific orderable part number and its manufacturer quality documentation. The available LM358B family page does not by itself establish that LM358BPX is AEC-Q100 qualified. For an automotive design, request the relevant quality and traceability documents before production release.

بيانات مرجعية هندسية لـ LM358BPX — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

The LM358BPX is most appropriate when an existing design uses the exact Texas Instruments 8-VFBGA footprint and needs two independent general-purpose amplifier channels. Its 36 V maximum supply rating, 1.2 MHz gain-bandwidth product, 3 mV input-offset rating, and 10 nA input-bias current provide a practical combination for industrial sensors, low-frequency feedback loops, audio preamplification, and current monitoring. The strongest design consideration is not the headline bandwidth but the package: conventional LM358 alternatives frequently use DIP or SOIC packages and therefore cannot replace LM358BPX without PCB changes. Select LM358BPX when footprint continuity, supply-voltage range, and general-purpose dual-channel performance matter. Consider a different amplifier only after checking its input common-mode range, output swing, stability with the selected feedback network, noise gain, and exact exposed or exposed-pad thermal requirements. For new BGA designs, confirm assembly land patterns and ball numbering directly with the manufacturer before committing the PCB.

المقارنة مع البدائل

المعامل هذا المنتج
Brand Texas Instruments
Package 8-VFBGA
Channel Count 2 channels
Maximum Supply Voltage 36 V
Gain-Bandwidth Product 1.2 MHz
Slew Rate 0.5 V/us
Input Offset Voltage 3 mV maximum
Input Bias Current 10 nA
Operating Temperature -40°C to 85°C

ملاحظات التصميم

Use the manufacturer’s 8-VFBGA land pattern and ball-orientation markings without modification. Place the positive-supply bypass capacitor directly between the V+ ball and the ground reference, and provide a local return path that does not force input currents through the amplifier ground connection. Keep the two channels’ feedback networks compact and route each channel’s inputs away from adjacent switching or high-current paths.

Do not infer common-mode or output-swing limits solely from the 36 V maximum supply rating. For a single 5 V supply, verify that the input and output voltages remain within the electrical limits stated in the datasheet for that supply configuration. Also remember that the 3 mV input offset is multiplied by the closed-loop noise gain, so high-gain sensor designs should include that value in their error budget.

Choose the closed-loop bandwidth from the 1.2 MHz gain-bandwidth product and the selected noise gain, then leave additional margin for gain tolerance and phase shift. The 0.5 V/us slew rate also sets a large-signal limit. This is normally adequate for low-frequency industrial and audio stages, but it can become the limiting factor in fast edge, communications, or waveform-generation applications.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The available manufacturer and distributor pages do not establish the requested compliance statuses for this exact LM358BPX order code. The -40°C to 85°C rating identifies a commercial-temperature device but does not by itself establish AEC-Q100 qualification.

تم التحقق من البيانات في: 2026-11-13 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

lm358b datasheet LM358BPX datasheet LM358BPX datasheet pdf LM358BPX pinout LM358BPX pin arrangement LM358BPX 8-VFBGA footprint LM358BPX equivalent LM358BPX replacement LM358BPX drop-in substitute LM358BPX price LM358BPX stock Texas Instruments LM358BPX LM358BPX vs LM2904 LM358BPX application circuit LM358BPX sensor amplifier

المكونات والمصطلحات ذات الصلة

Texas Instruments National Semiconductor LM358BPX LM358B LM358 dual operational amplifier voltage-feedback amplifier analog signal conditioner power management analog IC semiconductor 36 V maximum supply 1.2 MHz gain-bandwidth product 0.5 V/us slew rate 3 mV input offset voltage 10 nA input bias current 8-VFBGA VFBGA family ball grid array surface mount SMD industrial sensor interface audio preamplifier active filter motor current monitoring AEC-Q100 RoHS REACH
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر