Analog Devices

MAX232BAWE+ - 2/2 RS-232 Transceiver, 200 kbps | Analog Devices

MPN: MAX232BAWE+ ✗ انتهى عمره الإنتاجي
4.5 V to 5.5 V Vdss 16-pin SOIC Package
الحد الأدنى للطلب: 1 |

MAX232BAWE+ نظرة عامة

Analog Devices MAX232BAWE+ is a +5 V RS-232 interface transceiver with two drivers and two receivers, a maximum data rate of 200 kbps, and a 16-pin SOIC package. The device operates from a 4.5 V to 5.5 V supply and supports a 0°C to +70°C temperature range. MAX232BAWE+ converts TTL-compatible logic levels to and from RS-232 line levels, making it suitable for industrial control, instrumentation, and legacy serial-port equipment.

An RS-232 transceiver is an interface IC that bridges the voltage domains used by TTL/CMOS logic and RS-232 serial communications. The MAX232 family integrates charge-pump circuitry, drivers, and receivers into one package. This integration eliminates a separate RS-232 level-shifting circuit and places the complete signal-conditioning path close to the host logic. Within the product hierarchy, the MAX232 is an RS-232 transceiver, an interface IC, and a semiconductor.

The principal operating characteristics include two driver channels, two receiver channels, full-duplex capability, 200 kbps signaling, and 500 mV receiver hysteresis. The 500 mV hysteresis helps reject small noise disturbances around the receiver threshold. Its 4.5 V to 5.5 V supply range provides compatibility with conventional +5 V digital systems, while the integrated charge-pump circuitry develops the positive and negative voltage levels required by RS-232 drivers.

This MAX232BAWE+ device uses the 16-pin small-outline integrated-circuit package identified as 16-SOIC in the product information. Its 2/2 driver-receiver organization permits two logical serial channels per device. The 200 kbps maximum data rate is suitable for many legacy control and diagnostic ports, but it does not target high-speed differential serial protocols. Use a newer multi-protocol interface when rates substantially above 200 kbps, lower supply voltage, or smaller package area are required.

Typical uses include industrial serial adapters, laboratory instruments, embedded-control boards, barcode-scanner interfaces, and service equipment that retains an RS-232 port. In these systems, the MAX232BAWE+ can connect a microcontroller UART to a DB9 or other RS-232 connector. Designers must still account for cable length, grounding, protection, and the unidirectional nature of each RS-232 driver channel.

For layout, place the device close to the connector or protected interface boundary and route each RS-232 line away from sensitive clock and analog signals. Follow the manufacturer datasheet for the charge-pump capacitor connections, supply bypass capacitor, and unused-channel handling. Confirm the full logic-level and channel direction before assigning pins in a new PCB or converting an existing design.

This product reference combines the exact MAX232BAWE+ ordering information with practical RS-232 interface guidance, drop-in family comparisons, and engineering-focused design notes. It is intended to help engineers identify the correct package, operating limits, and replacement path without overlooking the distinctions between electrically similar MAX232 variants.

بدائل مباشرة لـ MAX232BAWE+ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع MAX232BAWE+ (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type, Interface Standard, Technology, Transceiver Configuration.

Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
قارن مع MAX232BAWE+ →
Maxim Integrated
Package: 16-SOIC
Product Type: RS-232 dual transceiver
Interface Standard: EIA/TIA-232E, V.28, V.24
قارن مع MAX232BAWE+ →
Analog Devices
Package: 16-SOIC narrow
Product Type: Dual RS-232 Transceiver
Interface Standard: EIA/TIA-232E, V.28, V.24
قارن مع MAX232BAWE+ →

MAX232AWE+

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 16-SOIC
Same 2/2 RS-232 channel count and 16-SOIC pinout; temperature-grade difference is 0% in channel count and package dimensions, while the exact temperature limits require verification.

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX232EWE+

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver · RS-232 · 4.5 V to 5.5 V · 5 V · 2 channels · 2 channels · 120 kbps · CMOS

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX232CSE+

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Analog Devices
📦 16-SOIC
Dual RS-232 Transceiver · EIA/TIA-232E, V.28, V.24 · 4.5 V to 5.5 V · 2 · 2 · 2/2 Full RS-232 · 16-SOIC narrow · 16 pins

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX232AESE+

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Maxim Integrated
📦 16-SOIC
RS-232 dual transceiver · 2 drivers · 2 receivers · 4.5 V to 5.5 V · +5 V · EIA/TIA-232E, V.28, V.24 · 2/2 full-duplex RS-232 · Enhanced CMOS

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX232ACSE+T

✅ بديل مباشر
Analog Devices
📦 16-SOIC
RS-232 Transceiver (2 Driver / 2 Receiver) · 200 kbps · 4.5 V to 5.5 V · 2 · 2 · Full · ±30 V (HBM ESD tolerance on RS-232 inputs) · 0 °C to +70 °C (C grade)

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX232BAWE+ المواصفات

Product Type RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Duplex Mode Full duplex
Maximum Data Rate 200 kbps
Supply Voltage Range 4.5 V to 5.5 V
Receiver Hysteresis 500 mV
نطاق درجة حرارة التشغيل 0°C to +70°C
العلبة 16-pin SOIC
Package Family SOIC family
نوع التركيب Surface mount
Interface Standard RS-232
Supply Type +5 V
Automotive Qualification Not applicable

دليل تكوين أطراف MAX232BAWE+ soic family

تكوين الأطراف لـ MAX232BAWE+ (حزمة soic family). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة soic family لـ MAX232BAWE+

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX232BAWE+.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MAX232BAWE+ مناسب لـ 6 التطبيقs: Industrial Serial Adapter, Laboratory Instrument Interface, Embedded Controller Communication, Barcode Scanner Interface, Test and Measurement Control Port, Legacy Service Equipment.

🏭

Industrial Serial Adapter

The MAX232BAWE+ fits an industrial serial adapter because it combines two RS-232 drivers, two receivers, and a 200 kbps data rate in one 16-SOIC package. It can connect two UART channels from a controller to protected RS-232 connector circuits without a separate level-shifting assembly. The integrated charge-pump function produces the bipolar voltage levels required by RS-232 drivers, while the 4.5 V to 5.5 V supply range matches conventional +5 V control electronics. Its listed 0°C to +70°C range makes it appropriate for indoor equipment managed within that thermal envelope. Designers should verify the exact data-sheet pinout and unused-channel recommendations before layout.

🔧

Laboratory Instrument Interface

The MAX232BAWE+ is appropriate for laboratory instruments that retain a legacy RS-232 port while using modern TTL logic internally. Two driver channels and two receiver channels support full-duplex serial communication, and the 200 kbps rate is well suited to command consoles, calibration equipment, and laboratory data acquisition controls. Because the MAX232BAWE+ operates from 4.5 V to 5.5 V, it integrates readily with +5 V digital logic, while its integrated charge pumps eliminate a discrete bipolar driver circuit. The 16-SOIC package simplifies board replacement in legacy instruments. For settings with broader ambient temperature, transients, or isolation requirements, select a suitably qualified interface and add appropriate connector protection.

🤖

Embedded Controller Communication

The MAX232BAWE+ can bridge a microcontroller UART to an RS-232 port in embedded-control equipment. A 200 kbps maximum rate supports command traffic, status reporting, firmware update links, and configuration protocols commonly used in legacy controllers, while the 2/2 channel organization can serve separate transmit and receive paths. The device requires only a +5 V supply in the 4.5 V to 5.5 V range and places the voltage-conversion function in a compact 16-SOIC package. Layout should keep the transceiver near the protected connector boundary and route noisy RS-232 traces away from precision analog circuitry. The MAX232 converts signal levels but does not provide galvanic isolation, surge protection, or automatic transceiver direction control.

📷

Barcode Scanner Interface

The MAX232BAWE+ suits barcode scanners and other point-of-sale peripherals that communicate through RS-232. The 200 kbps data rate exceeds the throughput normally needed for short scanner packets, and the integrated two-channel driver/receiver arrangement supports bidirectional command and acknowledgment traffic. Its +5 V supply operation and 16-SOIC footprint are convenient for established equipment layouts. Place the interface close to the external connector and include suitable transient protection because retail equipment may be exposed to cables that are longer than the logic board. The listed 0°C to +70°C operating range suits controlled indoor installations, but the complete enclosure temperature—not only the PCB temperature—must remain within the device limits.

🖥️

Test and Measurement Control Port

The MAX232BAWE+ is useful for test and measurement equipment that exposes an RS-232 control interface alongside TTL-based logic. The two receivers allow incoming commands or status signals, while the two drivers provide outbound serial data, supporting full-duplex operation at rates up to 200 kbps. Since the device operates from 4.5 V to 5.5 V, it can be used with conventional +5 V instrument electronics, and its integrated charge-pump design reduces external component count. The 16-SOIC package is appropriate for repair boards that follow the original MAX232 footprint. Engineers should preserve adequate separation between RS-232 routing and sensitive measurement circuitry and should not treat the MAX232 as a substitute for galvanic isolation in hazardous or ground-potential-sensitive test systems.

🔧

Legacy Service Equipment

The MAX232BAWE+ is a practical choice for repairing or extending legacy service equipment with an RS-232 service port. Two transmit and two receive channels reproduce the familiar MAX232 interface in a 16-SOIC footprint, and the 200 kbps limit is suitable for diagnostic commands, configuration dumps, and short status packets. Its 4.5 V to 5.5 V operating range matches the +5 V logic often retained in older instruments. When replacing an installed device, verify the package lead geometry, pin numbering, charge-pump capacitor values, and unused-pin connections against the manufacturer data sheet. Connector-side ESD or surge protection may need to be added separately, particularly for field-service equipment connected to long cables.

What is the MAX232BAWE+ used for?
The MAX232BAWE+ is a +5 V RS-232 transceiver that converts TTL-compatible logic signals to and from RS-232 voltage levels. According to the Analog Devices MAX232 data sheet, it contains two drivers and two receivers, supports full-duplex operation, and operates from 4.5 V to 5.5 V. The interface IC is commonly used to connect a UART in a controller, instrument, or embedded system to a legacy RS-232 connector.
What are the key specifications of MAX232BAWE+?
The key MAX232BAWE+ specifications are two drivers, two receivers, a 200 kbps maximum data rate, and a 4.5 V to 5.5 V supply range. The device is packaged in 16-SOIC and has a listed operating-temperature range of 0°C to +70°C. According to the Analog Devices MAX232 product page and data sheet, receiver hysteresis is 500 mV, helping the receiver distinguish valid logic states from small noise perturbations.
Where can I download the MAX232BAWE+ datasheet PDF?
The MAX232BAWE+ datasheet can be accessed through the official Analog Devices MAX232 product page at https://www.analog.com/en/products/MAX232.html. That page identifies the MAX232 as a production +5 V-powered multichannel RS-232 driver and receiver family and provides the manufacturer data sheet, product-selection table, documentation, and simulation resources. Engineers should use the family data sheet together with the exact ordering information for MAX232BAWE+.
Where can I find the MAX232BAWE+ pinout?
The MAX232BAWE+ pinout is defined in the pin-description and typical-application sections of the Analog Devices MAX232 manufacturer data sheet. The exact ordering information identifies a 16-SOIC package with two drivers and two receivers. Before assigning PCB tracks, verify every pin name and direction in the data sheet, especially the charge-pump capacitor pins, supply pins, receiver outputs, driver inputs, and RS-232 line pins.
Is MAX232BAWE+ obsolete?
Yes, the MAX232BAWE+ is listed as obsolete in the product information for this exact ordering code. The manufacturer still provides the MAX232 family documentation and product-selection information on its official product page. For a new design, confirm current lifecycle status and ordering options through the Request a Quote form on this page. For maintenance of an installed board, the important selection issue remains package, pinout, supply voltage, and channel compatibility.
Where can I buy MAX232BAWE+ and what is the current lead time?
Use the Request a Quote form on this page to request MAX232BAWE+ availability, current lead time, and minimum order quantity. Because MAX232BAWE+ is identified as obsolete, its supply status can vary by inventory and procurement channel. The Request a Quote workflow allows an engineer to confirm the exact MAX232BAWE+ suffix, 16-SOIC package, operating-temperature grade, and acceptable delivery conditions before releasing a production order.
What is the price of MAX232BAWE+?
Use the Request a Quote form on this page for a current MAX232BAWE+ quotation. The quote request should identify the exact MPN as MAX232BAWE+, including its suffix, and should state the required quantity and delivery target. Pricing for an obsolete interface IC may depend on lot availability, traceability requirements, and replenishment status, so obtain a current quotation instead of relying on a historical catalog amount when planning a build.
Is MAX232BAWE+ in stock?
Stock for MAX232BAWE+ should be confirmed through the Request a Quote form on this page because the exact ordering code is identified as obsolete. Ask the supplier to confirm quantity available, date code, lot traceability, and whether the package remains the original 16-SOIC configuration. For maintenance purchases, matching the complete MPN and suffix is especially important because MAX232 family members can differ in temperature grade, package code, and ordering treatment.
What can replace MAX232BAWE+?
The closest MAX232BAWE+ replacements are pin-compatible members of the MAX232 family offered in the same 16-pin SOIC footprint, such as MAX232AWE+, MAX232EWE+, MAX232CSE+, MAX232ACSE+, and MAX232AESE+. A replacement should be checked for driver and receiver count, supply range, temperature grade, receiver hysteresis, data rate, package dimensions, and exact pin names. The manufacturer data sheet remains the controlling document for substitution.
Is MAX232BAWE+ the same as MAX232ACSE+?
The MAX232BAWE+ and MAX232ACSE+ are closely related MAX232 interface transceivers, but they are not identical ordering codes. The MAX232BAWE+ is identified as a 2/2, 200 kbps, 4.5 V to 5.5 V device in a 16-SOIC package with a 0°C to +70°C range. Verify the exact pin assignments, package dimensions, temperature grade, and lifecycle status of MAX232ACSE+ before treating it as a production replacement.
What is the best Analog Devices equivalent for MAX232BAWE+?
The best MAX232BAWE+ equivalent is the member of the Analog Devices MAX232 family that preserves its 16-pin SOIC footprint, two-driver and two-receiver organization, +5 V operation, and required temperature range. MAX232AWE+, MAX232EWE+, MAX232CSE+, MAX232ACSE+, and MAX232AESE+ are comparison candidates, but none should be approved solely by package name. Check the data sheet and the procurement status of the exact replacement MPN.
MAX232BAWE+ vs MAX232ACSE+ - which is better for a legacy controller?
Choose the MAX232BAWE+ for an existing board requiring the exact obsolete ordering code, and consider MAX232ACSE+ only after confirming a complete match of pinout, package dimensions, electrical ratings, and temperature grade. Both belong to the MAX232 family and are associated with two-channel RS-232 conversion. For a new controller design, current lifecycle status and approved second-source availability may matter more than a nominal family-name similarity.
When should I choose MAX232BAWE+ over another MAX232 variant?
Choose MAX232BAWE+ when maintaining equipment that specifically requires the +5 V, 2/2, 16-SOIC commercial-temperature MAX232 configuration and the exact suffix is available through a controlled procurement channel. Select another MAX232 variant when its temperature grade better matches the deployment, qualification is needed, or the manufacturer confirms that lifecycle status has improved. Package dimensions and pin names must match before either choice is released to production.
Is MAX232BAWE+ suitable for industrial equipment?
The MAX232BAWE+ is suitable for equipment whose operating environment remains within its listed 0°C to +70°C range. For colder or hotter industrial installations, select a MAX232 variant with an appropriate extended temperature grade after checking its exact data sheet. Environmental suitability also depends on enclosure temperature, power dissipation, humidity, surge exposure, cable transients, and the system-level protection applied to the RS-232 connector.
What design considerations matter for a MAX232BAWE+ RS-232 port?
Place the MAX232BAWE+ near the connector or protected interface boundary, keep RS-232 traces away from sensitive analog and clock lines, and bypass the +5 V supply close to the device. Follow the manufacturer data sheet for charge-pump capacitors and unused inputs or outputs. At the connector, consider protection against electrostatic discharge and cable-borne transients. The device converts voltage levels but does not by itself provide complete surge, isolation, or ground-loop protection.

بيانات مرجعية هندسية لـ MAX232BAWE+ — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose MAX232BAWE+ when repairing or continuing production of equipment that specifically calls for the exact MAX232BAWE+ ordering code, the 16-SOIC footprint, two drivers, two receivers, a 4.5 V to 5.5 V supply, and the listed 0°C to +70°C operating range. Consider MAX232AWE+, MAX232EWE+, MAX232CSE+, MAX232AESE+, or MAX232ACSE+ when one of their documented temperature grades, qualification details, lifecycle status, or sourcing conditions better fits the project. Every proposed alternative must preserve the package dimensions and pin assignments; family membership alone is insufficient. For a new design with lower supply voltage, lower power, more channels, or a different communication standard, evaluate MAX3232 or another interface family instead of forcing a MAX232 replacement. For exposed cables or long industrial links, add external transient protection and consider galvanic isolation because the transceiver only converts RS-232 and TTL voltage levels.

المقارنة مع البدائل

المعامل هذا المنتج MAX232AWE+ MAX232EWE+ MAX232CSE+ MAX232AESE+ MAX232ACSE+
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Interface Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Number of Drivers 2 2 2 2 2 2
Number of Receivers 2 2 2 2 2 2

أبرز الفروقات

  • Exact obsolete ordering identity (مقابلMAX232ACSE+)
  • Two full-duplex channels in one package (مقابلMAX232CSE+)
  • Established 200 kbps RS-232 performance (مقابلMAX232EWE+)

ملاحظات التصميم

Place the MAX232BAWE+ close to the RS-232 connector or protected interface boundary, and route the RS-232 lines as a compact group away from sensitive analog inputs, oscillators, and high-speed clocks. Keep the charge-pump capacitor connections short and place the supply bypass capacitor close to the device. Use the manufacturer data-sheet pin description to assign logic and RS-232 signals; because the exact pin list is not published in the product excerpts, verify every connection before routing a replacement board.

Do not assume that every similarly named MAX232 ordering code is an unrestricted substitute. Compare the 16-SOIC footprint, lead geometry, pin numbering, two-driver and two-receiver organization, +5 V supply range, 200 kbps data rate, receiver hysteresis, and required temperature grade. Check whether the replacement is a commercial-, industrial-, or automotive-grade orderable configuration. Confirm that the manufacturer data sheet permits the intended unused-channel connections before using a family variant as a drop-in replacement.

RS-232 drivers intentionally produce bipolar transitions, so connector cables can introduce both radiated noise and incoming transients. Keep the transceiver close to the connector-side protection network, maintain a continuous ground reference, and avoid routing RS-232 conductors parallel to sensitive signal paths for long distances. The MAX232BAWE+ performs level conversion, but it does not provide galvanic isolation, surge protection, or unlimited fault tolerance. Add appropriately rated protection and isolation when the connected equipment is exposed to outdoor cables or large ground-potential differences.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The exact MAX232BAWE+ product listing identifies the device as obsolete but does not state its RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. Those fields remain unknown rather than being inferred from the MAX232 family name.

تم التحقق من البيانات في: 2026-11-17 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MAX232BAWE+ datasheet MAX232BAWE+ specifications MAX232BAWE+ pinout MAX232BAWE+ datasheet pdf Analog Devices MAX232BAWE+ MAX232BAWE+ 16 SOIC MAX232BAWE+ 200 kbps MAX232BAWE+ RS-232 transceiver MAX232BAWE+ equivalent MAX232BAWE+ replacement MAX232BAWE+ drop-in replacement MAX232BAWE+ vs MAX232ACSE+ MAX232BAWE+ price MAX232BAWE+ stock MAX232BAWE+ obsolete

المكونات والمصطلحات ذات الصلة

Analog Devices MAX232BAWE+ MAX232AWE+ MAX232EWE+ MAX232CSE+ MAX232AESE+ MAX232ACSE+ MAX232 RS-232 transceiver RS-232 interface IC interface integrated circuit semiconductor TTL logic full-duplex serial communication charge-pump circuit driver channel receiver channel 200 kbps data rate 500 mV receiver hysteresis 16-SOIC SOIC package family surface-mount package industrial serial interface legacy service equipment MAX3232
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر