MAX3243ECPWE4 - 3.3V/5V 3:5 RS-232 Transceiver | TI
MPN: MAX3243ECPWE4 ✓ نشطMAX3243ECPWE4 نظرة عامة
An RS-232 interface transceiver is an interface IC that combines digital logic-level line drivers and receivers with the voltage levels required by the RS-232 standard. This conversion allows a low-voltage controller, computer, or test instrument to communicate over a longer-distance, single-ended serial link. The MAX3243ECPWE4 belongs to the RS-232 transceiver family within interface ICs and combines three transmit channels with five receive channels.
Key features include its 3V to 5.5V operating supply, three transmit and five receive channels, and a 150ns receiver propagation delay. Its ±15kV HBM ESD protection improves tolerance of connector-borne electrostatic discharge, an important consideration when the interface connects to external equipment through a cable. The 28-terminal TSSOP also supports compact, high-density PCB layouts while retaining gull-wing leads for inspection and assembly.
The MAX3243 uses charge-pump-assisted RS-232 interface circuitry to generate the bipolar voltage levels required by RS-232 communication. The three-driver/five-receiver arrangement is useful when a system needs more receive channels than transmit channels, such as multiport instrumentation, industrial controllers, or data-acquisition equipment. Its 150ns receive delay is suitable for standard asynchronous serial interfaces where the overall system must still meet the receiver timing requirements of the connected protocol.
Typical applications include industrial serial-port adapters, RS-232 test equipment, point-of-sale terminals, barcode scanners, industrial control panels, and embedded instrumentation. The part can also support mixed transmit-and-receive ports in systems where one host must monitor several incoming devices. The 3.3V-compatible supply range allows operation from modern low-voltage digital rails without requiring a separate 5V transceiver.
When laying out the circuit, place charge-pump capacitors and interface bypass capacitors close to their associated pins, and route each driver output directly to its connector-side protection network. Keep sensitive receiver traces away from clocking, switching-converter, and high-current return paths to minimize noise pickup. Confirm that the connector-side network satisfies the applicable RS-232 and ESD requirements for the final system.
This product page combines the exact MAX3243ECPWE4 package, supply, protection, channel-count, and timing specifications with verified sourcing links, qualified replacement guidance, and practical PCB-design notes. The comparison and selection information is intended to help engineers assess footprint, temperature grade, and interface requirements before committing a 28-pin TSSOP design to production.
بدائل مباشرة لـ MAX3243ECPWE4 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
MAX3243EIPWR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MAX3243ECPWE4 المواصفات
| Product Type | Multichannel RS-232 line driver and receiver |
| Supply Voltage Range | 3V to 5.5V |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| Interface Standard | RS-232 |
| Transceiver Configuration | 3 drivers / 5 receivers |
| ESD Protection | ±15kV HBM |
| Receiver Propagation Delay | 150ns |
| Cited Supply Voltage | 3.6V |
| Package Type | 28-pin TSSOP |
| Terminal Count | 28 |
| Package Width | 4.40mm |
| Lead Form | Gull wing |
| Temperature Grade | Commercial |
| نوع التركيب | Surface mount |
| Package Shape | Rectangular |
دليل تكوين أطراف MAX3243ECPWE4 rectangular
تكوين الأطراف لـ MAX3243ECPWE4 (حزمة rectangular). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX3243ECPWE4.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MAX3243ECPWE4 مناسب لـ 6 التطبيقs: Industrial Serial-Port Controllers, RS-232 Test and Measurement Equipment, Data-Acquisition Systems, Point-of-Sale and Barcode Equipment, Embedded Service and Configuration Ports, Multiport Communications Panels.
Industrial Serial-Port Controllers
The MAX3243ECPWE4 fits industrial serial-port controllers that need more receive channels than transmit channels. Its three drivers can connect to three command or response ports, while five receivers can monitor five incoming RS-232 links in the same 28-pin TSSOP package. The 3V to 5.5V operating range supports both 3.3V embedded controllers and 5V legacy equipment. The cited 150ns receiver delay supports standard asynchronous links, while ±15kV HBM ESD protection improves robustness at connector-exposed interfaces. System designers should still provide proper grounding, controlled cable protection, and charge-pump and bypass capacitors placed exactly as recommended by the Texas Instruments layout guidance.
موصى به
RS-232 Test and Measurement Equipment
The MAX3243ECPWE4 is suitable for test and measurement instruments that must interrogate several RS-232 devices through one controller board. Three driver channels can send commands, and five receiver channels can capture responses from different units without requiring five separate transceiver packages. Its 150ns receiver delay is appropriate for conventional asynchronous instrument communication, and its 28-pin TSSOP preserves a compact footprint. The 3V to 5.5V supply range lets the interface operate beside modern 3.3V control logic. For bench and production equipment, use the ±15kV HBM-protected RS-232 pins as one layer of protection and retain connector-level protection for cables exposed to severe electrostatic discharge.
موصى به
Data-Acquisition Systems
The MAX3243ECPWE4 can serve as the host-facing RS-232 interface in a multi-channel data-acquisition system. Five receivers allow one controller to monitor five instruments or sensors that transmit status and measurement results, while three drivers support outbound commands or configuration writes. The mixed channel count provides useful flexibility without expanding to separate transceiver devices for every connection. Its 150ns receiver delay is suitable for many standard-rate asynchronous acquisition protocols, and the 3.3V-compatible supply range integrates cleanly with embedded control hardware. Place interface capacitors close to the device and separate receiver routing from switching nodes to prevent coupled noise from corrupting low-level measurements.
موصى به
Point-of-Sale and Barcode Equipment
The MAX3243ECPWE4 fits point-of-sale terminals and barcode systems that combine several RS-232 peripherals with local controller logic. One transmitter can send commands to a scanner while other channels support printers, scales, or customer displays, and the five receivers can accept responses or status information from several peripherals. Operation from 3V to 5.5V supports modern embedded systems, while the 28-pin TSSOP minimizes board area. The ±15kV HBM ESD rating is useful because scanners and other peripherals often connect through user-accessible cables. A robust implementation should include chassis grounding, appropriate connector protection, and careful separation between RS-232 traces and high-current peripheral returns.
موصى به
Embedded Service and Configuration Ports
The MAX3243ECPWE4 is appropriate for embedded equipment that exposes one or more service ports for configuration, diagnostics, and firmware recovery. The three-driver configuration lets a host send setup commands, while the five receivers provide spare monitoring channels for status LEDs, sensors, or field-service adapters accessed through the same RS-232 infrastructure. Its commercial temperature grade should be checked against the equipment's enclosure temperature, and the industrial-grade alternative may be preferable for harsher installations. The 3V to 5.5V supply range reduces level-conversion complexity beside 3.3V processors, while ±15kV HBM protection strengthens connector reliability. Use controlled logic levels and ensure software supports the selected channel assignments.
موصى به
Multiport Communications Panels
The MAX3243ECPWE4 works well in communications panels where one controller must aggregate several RS-232 links. The asymmetric three-driver and five-receiver arrangement allows more downstream devices to report status than receive commands, reducing the number of separate interface packages required. Its 150ns receiver delay supports standard asynchronous control traffic, and the 28-pin TSSOP provides a compact gull-wing package that remains straightforward for conventional surface-mount assembly. The 3V to 5.5V supply range supports modern embedded platforms, while ±15kV HBM ESD protection is valuable for externally accessible ports. For reliable field operation, add cable-side protection, maintain consistent signal grounding, and isolate noisy switching circuitry from receiver traces.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MAX3243ECPWE4 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MAX3243EIPWR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 28-TSSOP | 28-TSSOP |
| Interface Type | RS-232 transceiver | RS-232 transceiver |
| Temperature Grade | Commercial | Industrial |
| Terminal Count | 28 | 28 |
أبرز الفروقات
- Mixed channel ratio consolidates eight RS-232 functions (مقابلMAX3243EIPWR)
- Supports both modern and legacy supply rails (مقابلMAX3243EIPWR)
- Commercial-grade option for controlled environments (مقابلMAX3243EIPWR)
ملاحظات التصميم
Place all charge-pump capacitors and supply bypass capacitors immediately adjacent to their designated pins. Keep the associated traces short, preserve the capacitor values and tolerances specified in the Texas Instruments datasheet, and provide a direct return path from the bypass capacitor to the relevant ground pin. This is especially important because the RS-232 interface relies on switched charge-pump nodes to create its bipolar output levels.
Route each driver output directly toward its connector or protection component, and keep receiver traces away from switching regulators, clock lines, motor-control nodes, and high-current return paths. Use a continuous ground reference beneath the interface area, avoid splitting the ground plane beneath the transceiver, and verify that external cable shields have a deliberate chassis-to-board grounding strategy.
Do not treat the ±15kV HBM rating as a complete cable-protection solution. The HBM rating applies to a defined human-body-model test condition, while field cables can introduce larger or more repetitive transients. Add appropriately selected connector protection for the installation, maintain short surge-current paths, and verify that the completed system complies with its applicable EMC requirements.
Use the pin-description table to assign the three driver outputs and five receiver inputs, then confirm that no receiver is left floating. Software should handle all intended channels consistently, including disabled or unused ports. Because the receiver delay is cited as 150ns, include that delay when calculating protocol timing and avoid relying on cable rise time or host-driver latency as a substitute for interface timing.
معلومات الامتثال
The MAX3243ECPWE4 is identified as a ±15kV HBM-protected RS-232 transceiver, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for this exact orderable MPN.