Texas Instruments

MAX3243ECPWE4 - 3.3V/5V 3:5 RS-232 Transceiver | TI

MPN: MAX3243ECPWE4 ✓ Aktif
3V to 5.5V Vdss 28-pin TSSOP Package
MOQ: 1 |

MAX3243ECPWE4 Ringkasan

The Texas Instruments MAX3243ECPWE4 is a 3.3V/5V multichannel RS-232 line driver and receiver with three drivers and five receivers in a 28-pin TSSOP package. It supports a 3V to 5.5V supply range, operates from a 3.6V supply in the cited configuration, and provides ±15kV HBM electrostatic-discharge protection on the RS-232 interface. The device is specified as a commercial-temperature-grade, gull-wing surface-mount component.

An RS-232 interface transceiver is an interface IC that combines digital logic-level line drivers and receivers with the voltage levels required by the RS-232 standard. This conversion allows a low-voltage controller, computer, or test instrument to communicate over a longer-distance, single-ended serial link. The MAX3243ECPWE4 belongs to the RS-232 transceiver family within interface ICs and combines three transmit channels with five receive channels.

Key features include its 3V to 5.5V operating supply, three transmit and five receive channels, and a 150ns receiver propagation delay. Its ±15kV HBM ESD protection improves tolerance of connector-borne electrostatic discharge, an important consideration when the interface connects to external equipment through a cable. The 28-terminal TSSOP also supports compact, high-density PCB layouts while retaining gull-wing leads for inspection and assembly.

The MAX3243 uses charge-pump-assisted RS-232 interface circuitry to generate the bipolar voltage levels required by RS-232 communication. The three-driver/five-receiver arrangement is useful when a system needs more receive channels than transmit channels, such as multiport instrumentation, industrial controllers, or data-acquisition equipment. Its 150ns receive delay is suitable for standard asynchronous serial interfaces where the overall system must still meet the receiver timing requirements of the connected protocol.

Typical applications include industrial serial-port adapters, RS-232 test equipment, point-of-sale terminals, barcode scanners, industrial control panels, and embedded instrumentation. The part can also support mixed transmit-and-receive ports in systems where one host must monitor several incoming devices. The 3.3V-compatible supply range allows operation from modern low-voltage digital rails without requiring a separate 5V transceiver.

When laying out the circuit, place charge-pump capacitors and interface bypass capacitors close to their associated pins, and route each driver output directly to its connector-side protection network. Keep sensitive receiver traces away from clocking, switching-converter, and high-current return paths to minimize noise pickup. Confirm that the connector-side network satisfies the applicable RS-232 and ESD requirements for the final system.

This product page combines the exact MAX3243ECPWE4 package, supply, protection, channel-count, and timing specifications with verified sourcing links, qualified replacement guidance, and practical PCB-design notes. The comparison and selection information is intended to help engineers assess footprint, temperature grade, and interface requirements before committing a 28-pin TSSOP design to production.

Pilihan pengganti yang segera untuk MAX3243ECPWE4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MAX3243EIPWR

✅ Masuk Drop-In
Texas Instruments
📦 28-TSSOP
Multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 500 kbps · 3 channels · 5 channels · 3.3 V · plus or minus 15 kV IEC ESD protection · -40°C to +85°C

Hubungi untuk harga

Lihat Datasheet →

MAX3243ECPWE4 Spesifikasi

Product Type Multichannel RS-232 line driver and receiver
Supply Voltage Range 3V to 5.5V
Number of Drivers 3
Number of Receivers 5
Interface Standard RS-232
Transceiver Configuration 3 drivers / 5 receivers
ESD Protection ±15kV HBM
Receiver Propagation Delay 150ns
Cited Supply Voltage 3.6V
Package Type 28-pin TSSOP
Terminal Count 28
Package Width 4.40mm
Lead Form Gull wing
Temperature Grade Commercial
Jenis Pemasangan Surface mount
Package Shape Rectangular

Panduan Konfigurasi Pin MAX3243ECPWE4 rectangular

Konfigurasi pin untuk MAX3243ECPWE4 (rectangular pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai rectangular untuk MAX3243ECPWE4

Tiada data garisan pin yang diperoleh untuk MAX3243ECPWE4.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MAX3243ECPWE4 patut untuk 6 aplikasis: Industrial Serial-Port Controllers, RS-232 Test and Measurement Equipment, Data-Acquisition Systems, Point-of-Sale and Barcode Equipment, Embedded Service and Configuration Ports, Multiport Communications Panels.

🏭

Industrial Serial-Port Controllers

The MAX3243ECPWE4 fits industrial serial-port controllers that need more receive channels than transmit channels. Its three drivers can connect to three command or response ports, while five receivers can monitor five incoming RS-232 links in the same 28-pin TSSOP package. The 3V to 5.5V operating range supports both 3.3V embedded controllers and 5V legacy equipment. The cited 150ns receiver delay supports standard asynchronous links, while ±15kV HBM ESD protection improves robustness at connector-exposed interfaces. System designers should still provide proper grounding, controlled cable protection, and charge-pump and bypass capacitors placed exactly as recommended by the Texas Instruments layout guidance.

🖥️

RS-232 Test and Measurement Equipment

The MAX3243ECPWE4 is suitable for test and measurement instruments that must interrogate several RS-232 devices through one controller board. Three driver channels can send commands, and five receiver channels can capture responses from different units without requiring five separate transceiver packages. Its 150ns receiver delay is appropriate for conventional asynchronous instrument communication, and its 28-pin TSSOP preserves a compact footprint. The 3V to 5.5V supply range lets the interface operate beside modern 3.3V control logic. For bench and production equipment, use the ±15kV HBM-protected RS-232 pins as one layer of protection and retain connector-level protection for cables exposed to severe electrostatic discharge.

📡

Data-Acquisition Systems

The MAX3243ECPWE4 can serve as the host-facing RS-232 interface in a multi-channel data-acquisition system. Five receivers allow one controller to monitor five instruments or sensors that transmit status and measurement results, while three drivers support outbound commands or configuration writes. The mixed channel count provides useful flexibility without expanding to separate transceiver devices for every connection. Its 150ns receiver delay is suitable for many standard-rate asynchronous acquisition protocols, and the 3.3V-compatible supply range integrates cleanly with embedded control hardware. Place interface capacitors close to the device and separate receiver routing from switching nodes to prevent coupled noise from corrupting low-level measurements.

🖨️

Point-of-Sale and Barcode Equipment

The MAX3243ECPWE4 fits point-of-sale terminals and barcode systems that combine several RS-232 peripherals with local controller logic. One transmitter can send commands to a scanner while other channels support printers, scales, or customer displays, and the five receivers can accept responses or status information from several peripherals. Operation from 3V to 5.5V supports modern embedded systems, while the 28-pin TSSOP minimizes board area. The ±15kV HBM ESD rating is useful because scanners and other peripherals often connect through user-accessible cables. A robust implementation should include chassis grounding, appropriate connector protection, and careful separation between RS-232 traces and high-current peripheral returns.

🔧

Embedded Service and Configuration Ports

The MAX3243ECPWE4 is appropriate for embedded equipment that exposes one or more service ports for configuration, diagnostics, and firmware recovery. The three-driver configuration lets a host send setup commands, while the five receivers provide spare monitoring channels for status LEDs, sensors, or field-service adapters accessed through the same RS-232 infrastructure. Its commercial temperature grade should be checked against the equipment's enclosure temperature, and the industrial-grade alternative may be preferable for harsher installations. The 3V to 5.5V supply range reduces level-conversion complexity beside 3.3V processors, while ±15kV HBM protection strengthens connector reliability. Use controlled logic levels and ensure software supports the selected channel assignments.

🌐

Multiport Communications Panels

The MAX3243ECPWE4 works well in communications panels where one controller must aggregate several RS-232 links. The asymmetric three-driver and five-receiver arrangement allows more downstream devices to report status than receive commands, reducing the number of separate interface packages required. Its 150ns receiver delay supports standard asynchronous control traffic, and the 28-pin TSSOP provides a compact gull-wing package that remains straightforward for conventional surface-mount assembly. The 3V to 5.5V supply range supports modern embedded platforms, while ±15kV HBM ESD protection is valuable for externally accessible ports. For reliable field operation, add cable-side protection, maintain consistent signal grounding, and isolate noisy switching circuitry from receiver traces.

Ringkasan Produk Disebarkan

MAX3237CAI+T Related multichannel RS-232 transceiver Dipergunakan di: Industrial Serial-Port Controllers, RS-232 Test and Measurement Equipment, Data-Acquisition Systems, Point-of-Sale and Barcode Equipment, Embedded Service and Configuration Ports, Multiport Communications Panels MAX3232IPW Texas Instruments Dipergunakan di: Industrial Serial-Port Controllers, RS-232 Test and Measurement Equipment, Data-Acquisition Systems, Point-of-Sale and Barcode Equipment, Embedded Service and Configuration Ports, Multiport Communications Panels
What is the MAX3243ECPWE4?
The MAX3243ECPWE4 is a Texas Instruments multichannel RS-232 interface transceiver containing three line drivers and five line receivers in a 28-pin TSSOP package. According to the manufacturer datasheet, it operates from a 3V to 5.5V supply and includes ±15kV HBM ESD protection. Its mixed 3:5 channel arrangement is useful for equipment that must transmit to and monitor several external RS-232 ports.
What is the supply voltage range of MAX3243ECPWE4?
The MAX3243ECPWE4 operates from 3V to 5.5V. According to the Texas Instruments datasheet, this range supports both 3.3V and 5V system rails, while a 3.6V operating condition is also cited for the device. The interface transceiver therefore provides a practical bridge between low-voltage digital logic and bipolar RS-232 signaling.
How many RS-232 drivers and receivers does MAX3243ECPWE4 have?
The MAX3243ECPWE4 provides three RS-232 drivers and five RS-232 receivers. According to the Texas Instruments datasheet, the 3:5 ratio is intentionally asymmetric and is particularly useful for test equipment, multiport controllers, and acquisition systems that need to receive from more devices than they transmit to. All channels are integrated into one 28-pin TSSOP package.
Does MAX3243ECPWE4 include ESD protection?
Yes, the MAX3243ECPWE4 includes ±15kV HBM ESD protection on its RS-232 interface. According to the Texas Instruments datasheet, this protection is intended to improve survivability when the connector is exposed to electrostatic discharge. It does not remove the need for suitable connector protection and system-level grounding in harsh installations.
What is the receiver delay of MAX3243ECPWE4?
The cited receiver propagation delay of the MAX3243ECPWE4 is 150ns. According to the Texas Instruments datasheet, this timing supports standard asynchronous RS-232 reception and helps determine whether a particular baud rate remains practical after accounting for the interface and the connected protocol. Allow additional margin for cable, connector, and firmware timing.
What package does MAX3243ECPWE4 use?
The MAX3243ECPWE4 uses a 28-pin TSSOP package with gull-wing leads and a stated package width of 4.40mm. According to the Texas Instruments package information, the rectangular surface-mount format is suitable for compact PCB layouts. Confirm land-pattern dimensions against the manufacturer mechanical drawing before placing the footprint.
Where can I download the MAX3243ECPWE4 datasheet PDF?
The MAX3243ECPWE4 datasheet PDF can be obtained from the linked Texas Instruments product document. The manufacturer datasheet contains the authoritative pin description, electrical characteristics, recommended operating conditions, charge-pump capacitor values, and package drawings. Use the pin-description table and mechanical diagram when assigning PCB tracks and connector protection components.
Where can I find the MAX3243ECPWE4 pinout?
The MAX3243ECPWE4 pinout is defined in the pin-description table of the Texas Instruments datasheet. The device is a 28-pin TSSOP, but the complete numbered pin list is not reproduced on this page. Use the manufacturer package drawing and pin table together to confirm driver outputs, receiver inputs, supply pins, ground pins, and charge-pump connections.
Is MAX3243ECPWE4 suitable for 3.3V systems?
Yes, the MAX3243ECPWE4 is suitable for 3.3V systems because its specified supply range is 3V to 5.5V. According to the Texas Instruments datasheet, the device can therefore operate from a 3.3V digital rail while providing the bipolar voltage levels required on the RS-232 side. Verify local bypass capacitance and output-slew requirements in the final design.
What can replace MAX3243ECPWE4?
The closest identified replacement is the MAX3243EIPWR, which retains the 28-terminal TSSOP format but changes the device suffix and temperature-grade positioning. According to the Texas Instruments cross-reference material, a drop-in replacement may have minor parametric differences. Confirm enable behavior, supply range, channel count, ESD rating, and pin names before treating it as a direct substitution.
What is the difference between MAX3243ECPWE4 and MAX3243EIPWR?
Both devices are identified as 28-terminal MAX3243-family transceivers, but their orderable suffixes identify different grade and packaging options. The MAX3243ECPWE4 is commercial grade, whereas the MAX3243EIPWR is positioned as an industrial-grade alternative. The package remains TSSOP, so the footprint is compatible, but temperature limits and electrical details should still be checked against the manufacturer datasheet.
When should I choose MAX3243ECPWE4 over MAX3243EIPWR?
Choose MAX3243ECPWE4 when the required operating-temperature range is covered by the commercial grade and the assembly matches the E suffix ordering option. Choose MAX3243EIPWR when an industrial-grade 28-pin TSSOP variant is required. The decision should be based on temperature, qualification, sourcing, and lifecycle requirements rather than package appearance alone.
Is MAX3243ECPWE4 suitable for industrial RS-232 equipment?
The MAX3243ECPWE4 can be used in industrial RS-232 equipment when its commercial temperature grade and electrical ratings cover the enclosure environment. According to the Texas Instruments datasheet, it provides three drivers, five receivers, 3V to 5.5V operation, and ±15kV HBM ESD protection. Choose the industrial-grade MAX3243EIPWR when the ambient-temperature requirement exceeds the commercial option.
Where can I buy MAX3243ECPWE4 and check current lead time?
Current purchasing, stock, and lead-time information for the MAX3243ECPWE4 is handled through the Request a Quote form on this page. The form allows you to specify the required quantity, package option, and delivery target. Because inventory and production schedules change, request a current quotation rather than relying on a static listing value.
What is the best MAX3243ECPWE4 replacement for a 28-pin TSSOP PCB?
The MAX3243EIPWR is the best identified 28-pin TSSOP replacement candidate because the manufacturer cross-reference page lists it as a direct drop-in option with possible minor parametric differences. According to Texas Instruments cross-reference guidance, no PCB change is normally required. Still verify supply voltage, channel arrangement, temperature range, ESD rating, and shutdown behavior before production substitution.
Is MAX3243ECPWE4 the same as MAX3237CAI+T or MAX3232IPW?
No, the MAX3243ECPWE4 is not automatically interchangeable with the MAX3237CAI+T or MAX3232IPW. The comparison pages identify them as related RS-232 interface products, but their channel counts, package arrangements, and electrical details differ. The MAX3243ECPWE4 is a 28-pin TSSOP with three drivers and five receivers, so each candidate footprint and function must be verified separately.
What are the key specifications of MAX3243ECPWE4 that engineers should know?
The key MAX3243ECPWE4 specifications are a 3V to 5.5V supply range, three RS-232 drivers, five RS-232 receivers, a 28-pin TSSOP package, ±15kV HBM ESD protection, a cited 150ns receiver delay, and commercial temperature grade. According to the Texas Instruments datasheet, the mixed channel ratio supports compact multiport equipment while the 3.3V-compatible supply works with modern embedded systems.

Data referensi kejuruteraan untuk MAX3243ECPWE4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the MAX3243ECPWE4 when the design needs a compact 28-pin TSSOP RS-232 interface with three transmit channels, five receive channels, 3V to 5.5V operation, and ±15kV HBM protection. It is particularly useful in commercial-temperature equipment where the larger receiver count simplifies multiport monitoring. Choose the MAX3243EIPWR when the same MAX3243 family and TSSOP footprint are needed but industrial temperature positioning is required. The MAX3237CAI+T and MAX3232IPW are related RS-232 devices, not automatically interchangeable because their packages, channel counts, and electrical characteristics differ. Before selecting any replacement, verify the numbered pinout, supply range, receiver delay, ESD rating, temperature limits, charge-pump capacitor values, and enable or shutdown behavior against the manufacturer datasheet.

Perbandingan dengan Gantian

Parametr Produk Ini MAX3243EIPWR
Brand Texas Instruments Texas Instruments
Package 28-TSSOP 28-TSSOP
Interface Type RS-232 transceiver RS-232 transceiver
Temperature Grade Commercial Industrial
Terminal Count 28 28

Penyeberangsung Jelas

  • Mixed channel ratio consolidates eight RS-232 functions (vsMAX3243EIPWR)
  • Supports both modern and legacy supply rails (vsMAX3243EIPWR)
  • Commercial-grade option for controlled environments (vsMAX3243EIPWR)

Catatan Desain

Place all charge-pump capacitors and supply bypass capacitors immediately adjacent to their designated pins. Keep the associated traces short, preserve the capacitor values and tolerances specified in the Texas Instruments datasheet, and provide a direct return path from the bypass capacitor to the relevant ground pin. This is especially important because the RS-232 interface relies on switched charge-pump nodes to create its bipolar output levels.

Route each driver output directly toward its connector or protection component, and keep receiver traces away from switching regulators, clock lines, motor-control nodes, and high-current return paths. Use a continuous ground reference beneath the interface area, avoid splitting the ground plane beneath the transceiver, and verify that external cable shields have a deliberate chassis-to-board grounding strategy.

Do not treat the ±15kV HBM rating as a complete cable-protection solution. The HBM rating applies to a defined human-body-model test condition, while field cables can introduce larger or more repetitive transients. Add appropriately selected connector protection for the installation, maintain short surge-current paths, and verify that the completed system complies with its applicable EMC requirements.

Use the pin-description table to assign the three driver outputs and five receiver inputs, then confirm that no receiver is left floating. Software should handle all intended channels consistently, including disabled or unused ports. Because the receiver delay is cited as 150ns, include that delay when calculating protocol timing and avoid relying on cable rise time or host-driver latency as a substitute for interface timing.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The MAX3243ECPWE4 is identified as a ±15kV HBM-protected RS-232 transceiver, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for this exact orderable MPN.

Data disahkan pada: 2026-11-09 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MAX3243ECPWE4 datasheet MAX3243ECPWE4 pinout MAX3243ECPWE4 datasheet pdf MAX3243ECPWE4 equivalent MAX3243ECPWE4 replacement MAX3243ECPWE4 cross reference MAX3243ECPWE4 price MAX3243ECPWE4 stock Texas Instruments MAX3243ECPWE4 MAX3243ECPWE4 vs MAX3243EIPWR MAX3243ECPWE4 28-TSSOP footprint MAX3243ECPWE4 RS-232 application circuit

Komponen dan Tanda berkaitan

Texas Instruments MAX3243ECPWE4 MAX3243EIPWR MAX3237CAI+T MAX3232IPW RS-232 transceiver RS-232 line driver RS-232 receiver multichannel transceiver interface IC semiconductor charge-pump interface ESD protection HBM 28-TSSOP TSSOP package family gull-wing surface mount SMD 3V to 5.5V supply 150ns receiver delay industrial controller data-acquisition system point-of-sale equipment test and measurement
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ