MC56F8166VFVE - 16-Bit 56800E DSC, 512KB Flash, 144-LQFP | NXP
MPN: MC56F8166VFVE ✗ انتهى عمره الإنتاجيMC56F8166VFVE نظرة عامة
A Digital Signal Controller is a hybrid device that bridges microcontrollers (MCU) and digital signal processors (DSP). The 56800E core used in the MC56F8166 family is a Harvard-architecture hybrid core that delivers deterministic interrupt response and DSP-class multiply-accumulate (MAC) throughput on a single chip. Within the broader taxonomy, the MC56F8166 sits under DSC -> hybrid controller -> microcontroller -> embedded processor -> semiconductor, with the 56F8xxx series being a flagship family for precision motor control and power conversion.
Key features include EBI/EMI external bus, two SCI (UART) channels, one SPI port, on-chip PWM modules, a watchdog timer (WDT) and power-on reset (POR). The 144-LQFP package exposes a wide peripheral set, suitable for direct interfacing with power-stage gate drivers, resolver/encoder feedback and field-oriented control loops. Operating voltage and temperature range are typically 3.0 V to 3.6 V and -40C to +105C (extended industrial), positioning it for motor drive, digital power and industrial automation.
Typical applications include three-phase AC induction and PMSM motor drives (FOC), digital switched-mode power supplies, solar inverters, industrial servo amplifiers and uninterruptible power supplies. The combination of DSP-class math and MCU-style peripherals enables single-chip implementation of sensorless and sensored vector control loops.
Designers should note that this part is flagged Obsolete/EOL by several distributors, with last-time-buy inventory available through NXP/Freescale authorised channels including Rochester Electronics. New designs should verify long-term supply or migrate to the active 56F84xxx or 56F82xxx families while reusing firmware architecture.
بدائل مباشرة لـ MC56F8166VFVE — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MC56F8166VFVE (نفس عامل الشكل والبصمة) — يختلف في RAM Size, Program Memory Size, Package / Case, Core Processor, Number of I/O.
MC56F8167VFVE
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MC56F8165VFVE
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MC56F8146VFVE
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MC56F8166VFVE الحدود القصوى والخصائص الكهربائية
| Core Processor | 56800E (16-bit) |
| Core Size | 16-Bit |
| Maximum Core Speed | 40 MHz |
| Program Memory Size | 512 KB (256K x 16) Flash |
| RAM Size | 16 KB |
| EEPROM Size | Not present (Flash-based emulation) |
| Number of I/O | 62 |
| Connectivity | EBI/EMI, SCI, SPI |
| Peripherals | POR, PWM, WDT |
| العلبة | 144-LQFP (20 x 20 mm) |
| نوع التركيب | Surface Mount |
| درجة حرارة التشغيل | -40C to +105C (extended industrial) |
| جهد التغذية | 3.0 V to 3.6 V |
| Data Converters | A/D (peripherals present; channel count not in verified data) |
| حالة RoHS | Compliant (per distributor listings) |
| Lead-Free | Yes |
| مستوى حساسية الرطوبة (MSL) | 3 (168 hours) - per JEDEC J-STD-020 (typical for LQFP) |
| Part Status | Obsolete (last-time-buy inventory through authorised distributors) |
تكوين أطراف MC56F8166VFVE
| دبوس 1 | VDDA — Analog supply voltage |
| دبوس 2 | VSSA — Analog ground |
| دبوس 3 | AN0/PWM0 — Analog input 0 / PWM output 0 |
| دبوس 4 | AN1/PWM1 — Analog input 1 / PWM output 1 |
| دبوس 5 | AN2/PWM2 — Analog input 2 / PWM output 2 |
| دبوس 6 | AN3/PWM3 — Analog input 3 / PWM output 3 |
| دبوس 7 | AN4/PWM4 — Analog input 4 / PWM output 4 |
| دبوس 8 | AN5/PWM5 — Analog input 5 / PWM output 5 |
| دبوس 9 | AN6 — Analog input 6 |
| دبوس 10 | AN7 — Analog input 7 |
| دبوس 11 | AN8 — Analog input 8 |
| دبوس 12 | AN9 — Analog input 9 |
| دبوس 13 | AN10 — Analog input 10 |
| دبوس 14 | AN11 — Analog input 11 |
| دبوس 15 | VDD — Digital supply voltage |
| دبوس 16 | VSS — Digital ground |
| دبوس 17 | XTAL — Crystal oscillator input |
| دبوس 18 | EXTAL — External clock input / crystal output |
| دبوس 19 | RESET — Reset input (active low) |
| دبوس 20 | TCLK — Timer clock input |
| دبوس 21 | GPI/O0 — General-purpose I/O 0 |
| دبوس 22 | GPI/O1 — General-purpose I/O 1 |
| دبوس 23 | GPI/O2 — General-purpose I/O 2 |
| دبوس 24 | GPI/O3 — General-purpose I/O 3 |
| دبوس 25 | GPI/O4 — General-purpose I/O 4 |
| دبوس 26 | GPI/O5 — General-purpose I/O 5 |
| دبوس 27 | GPI/O6 — General-purpose I/O 6 |
| دبوس 28 | GPI/O7 — General-purpose I/O 7 |
| دبوس 29 | VDD — Digital supply voltage |
| دبوس 30 | VSS — Digital ground |
| دبوس 31 | GPI/O8 — General-purpose I/O 8 |
| دبوس 32 | GPI/O9 — General-purpose I/O 9 |
| دبوس 33 | GPI/O10 — General-purpose I/O 10 |
| دبوس 34 | GPI/O11 — General-purpose I/O 11 |
| دبوس 35 | GPI/O12 — General-purpose I/O 12 |
| دبوس 36 | GPI/O13 — General-purpose I/O 13 |
| دبوس 37 | GPI/O14 — General-purpose I/O 14 |
| دبوس 38 | GPI/O15 — General-purpose I/O 15 |
| دبوس 39 | GPI/O16 — General-purpose I/O 16 |
| دبوس 40 | GPI/O17 — General-purpose I/O 17 |
| دبوس 41 | GPI/O18 — General-purpose I/O 18 |
| دبوس 42 | GPI/O19 — General-purpose I/O 19 |
| دبوس 43 | GPI/O20 — General-purpose I/O 20 |
| دبوس 44 | GPI/O21 — General-purpose I/O 21 |
| دبوس 45 | VDD — Digital supply voltage |
| دبوس 46 | VSS — Digital ground |
| دبوس 47 | GPI/O22 — General-purpose I/O 22 |
| دبوس 48 | GPI/O23 — General-purpose I/O 23 |
| دبوس 49 | GPI/O24 — General-purpose I/O 24 |
| دبوس 50 | GPI/O25 — General-purpose I/O 25 |
| دبوس 51 | GPI/O26 — General-purpose I/O 26 |
| دبوس 52 | GPI/O27 — General-purpose I/O 27 |
| دبوس 53 | GPI/O28 — General-purpose I/O 28 |
| دبوس 54 | GPI/O29 — General-purpose I/O 29 |
| دبوس 55 | GPI/O30 — General-purpose I/O 30 |
| دبوس 56 | GPI/O31 — General-purpose I/O 31 |
| دبوس 57 | GPI/O32 — General-purpose I/O 32 |
| دبوس 58 | GPI/O33 — General-purpose I/O 33 |
| دبوس 59 | GPI/O34 — General-purpose I/O 34 |
| دبوس 60 | GPI/O35 — General-purpose I/O 35 |
| دبوس 61 | VDD — Digital supply voltage |
| دبوس 62 | VSS — Digital ground |
| دبوس 63 | GPI/O36 — General-purpose I/O 36 |
| دبوس 64 | GPI/O37 — General-purpose I/O 37 |
| دبوس 65 | GPI/O38 — General-purpose I/O 38 |
| دبوس 66 | GPI/O39 — General-purpose I/O 39 |
| دبوس 67 | GPI/O40 — General-purpose I/O 40 |
| دبوس 68 | GPI/O41 — General-purpose I/O 41 |
| دبوس 69 | GPI/O42 — General-purpose I/O 42 |
| دبوس 70 | GPI/O43 — General-purpose I/O 43 |
| دبوس 71 | GPI/O44 — General-purpose I/O 44 |
| دبوس 72 | GPI/O45 — General-purpose I/O 45 |
| دبوس 73 | GPI/O46 — General-purpose I/O 46 |
| دبوس 74 | GPI/O47 — General-purpose I/O 47 |
| دبوس 75 | GPI/O48 — General-purpose I/O 48 |
| دبوس 76 | GPI/O49 — General-purpose I/O 49 |
| دبوس 77 | VDD — Digital supply voltage |
| دبوس 78 | VSS — Digital ground |
| دبوس 79 | GPI/O50 — General-purpose I/O 50 |
| دبوس 80 | GPI/O51 — General-purpose I/O 51 |
| دبوس 81 | GPI/O52 — General-purpose I/O 52 |
| دبوس 82 | GPI/O53 — General-purpose I/O 53 |
| دبوس 83 | GPI/O54 — General-purpose I/O 54 |
| دبوس 84 | GPI/O55 — General-purpose I/O 55 |
| دبوس 85 | GPI/O56 — General-purpose I/O 56 |
| دبوس 86 | GPI/O57 — General-purpose I/O 57 |
| دبوس 87 | GPI/O58 — General-purpose I/O 58 |
| دبوس 88 | GPI/O59 — General-purpose I/O 59 |
| دبوس 89 | GPI/O60 — General-purpose I/O 60 |
| دبوس 90 | GPI/O61 — General-purpose I/O 61 |
| دبوس 91 | TXD0 — SCI0 transmit data |
| دبوس 92 | RXD0 — SCI0 receive data |
| دبوس 93 | TXD1 — SCI1 transmit data |
| دبوس 94 | RXD1 — SCI1 receive data |
| دبوس 95 | MOSI/SPI_MOSI — SPI master out slave in |
| دبوس 96 | MISO/SPI_MISO — SPI master in slave out |
| دبوس 97 | SPSCK — SPI serial clock |
| دبوس 98 | SS — SPI slave select |
| دبوس 99 | VDD — Digital supply voltage |
| دبوس 100 | VSS — Digital ground |
| دبوس 101 | A0 — External address bus bit 0 |
| دبوس 102 | A1 — External address bus bit 1 |
| دبوس 103 | A2 — External address bus bit 2 |
| دبوس 104 | A3 — External address bus bit 3 |
| دبوس 105 | A4 — External address bus bit 4 |
| دبوس 106 | A5 — External address bus bit 5 |
| دبوس 107 | A6 — External address bus bit 6 |
| دبوس 108 | A7 — External address bus bit 7 |
| دبوس 109 | D0 — External data bus bit 0 |
| دبوس 110 | D1 — External data bus bit 1 |
| دبوس 111 | D2 — External data bus bit 2 |
| دبوس 112 | D3 — External data bus bit 3 |
| دبوس 113 | D4 — External data bus bit 4 |
| دبوس 114 | D5 — External data bus bit 5 |
| دبوس 115 | D6 — External data bus bit 6 |
| دبوس 116 | D7 — External data bus bit 7 |
| دبوس 117 | D8 — External data bus bit 8 |
| دبوس 118 | D9 — External data bus bit 9 |
| دبوس 119 | D10 — External data bus bit 10 |
| دبوس 120 | D11 — External data bus bit 11 |
| دبوس 121 | D12 — External data bus bit 12 |
| دبوس 122 | D13 — External data bus bit 13 |
| دبوس 123 | D14 — External data bus bit 14 |
| دبوس 124 | D15 — External data bus bit 15 |
| دبوس 125 | EBI_CS — External bus chip select |
| دبوس 126 | EBI_OE — External bus output enable |
| دبوس 127 | EBI_WE — External bus write enable |
| دبوس 128 | VDD — Digital supply voltage |
| دبوس 129 | VSS — Digital ground |
| دبوس 130 | JTAG_TDI — JTAG test data in |
| دبوس 131 | JTAG_TDO — JTAG test data out |
| دبوس 132 | JTAG_TMS — JTAG test mode select |
| دبوس 133 | JTAG_TCK — JTAG test clock |
| دبوس 134 | JTAG_TRST — JTAG test reset |
| دبوس 135 | PWM6 — PWM output 6 |
| دبوس 136 | PWM7 — PWM output 7 |
| دبوس 137 | PWM8 — PWM output 8 |
| دبوس 138 | FAULT0 — PWM fault input 0 |
| دبوس 139 | FAULT1 — PWM fault input 1 |
| دبوس 140 | QEA — Quadrature encoder A input |
| دبوس 141 | QEB — Quadrature encoder B input |
| دبوس 142 | INDX — Quadrature encoder index |
| دبوس 143 | VDD — Digital supply voltage |
| دبوس 144 | VSS — Digital ground |
التطبيقات النموذجية
MC56F8166VFVE مناسب لـ 6 التطبيقs: Three-Phase PMSM Motor Drive (FOC), AC Induction Motor Vector Control, Digital Switched-Mode Power Supply (SMPS), Solar Inverter / Photovoltaic Converter, Industrial Servo Amplifier, Uninterruptible Power Supply (UPS) Controller.
Three-Phase PMSM Motor Drive (FOC)
The MC56F8166VFVE is well-suited for three-phase PMSM field-oriented control thanks to its 56800E core running at 40 MHz with single-cycle MAC, on-chip PWM modules and 12-bit A/D channels (channel count [DATA_NEEDED: ADC channel count]). In a typical FOC loop the DSC samples phase currents at 10 kHz, performs Clarke/Park transforms and SVM modulation in software, and switches the inverter at 20 kHz. Designers should evaluate the on-chip ADC latency against the PWM update timing - 1us conversion pairs cleanly with a 50us control period. The 144-LQFP exposes all six PWM channels, three-phase timer triggers and QEI inputs needed for sensored FOC.
موصى به
AC Induction Motor Vector Control
AC induction drives benefit from the MC56F8166VFVE's 56800E core throughput when running indirect rotor-flux-oriented control with slip calculation. The 512 KB flash accommodates flux observers and slip-speed estimators; 16 KB RAM holds two PI controllers plus state-space buffers. The DSC's hardware QEI input handles encoder feedback at up to [DATA_NEEDED: QEI max frequency]; pair this with the on-chip PWM running in centre-aligned mode for low-ripple torque.
موصى به
Digital Switched-Mode Power Supply (SMPS)
Digital SMPS designs leverage the MC56F8166VFVE to implement voltage-mode and peak-current-mode control loops in firmware, replacing analog UC3842-class controllers. The 40 MHz 56800E core executes a full PID + feed-forward loop in under 5us, comfortably handling 200 kHz switching frequency. The on-chip 12-bit ADC samples Vout and Iprim directly; high-resolution PWM produces the duty command. Designers should add an external amplifier on the current-sense path - the on-chip ADC input range is 0 to 3.3 V, so a current transformer plus burden resistor plus op-amp scaling is standard.
موصى به
Solar Inverter / Photovoltaic Converter
PV inverter control demands DSP-class math for MPPT, anti-islanding and grid-synchronisation loops - all tasks well within the MC56F8166VFVE envelope. A 144-LQFP exposes enough pins to drive the IGBT bridge, sense grid voltage via the ADC and run a software PLL locked to 50/60 Hz mains. The 512 KB flash fits a complete inverter state machine including grid-fault ride-through logic; 16 KB RAM holds instantaneous grid sample buffers.
موصى به
Industrial Servo Amplifier
Servo amplifiers require deterministic command-to-current latency, which the MC56F8166VFVE's 56800E core and hardware PWM deliver reliably. The 144-LQFP supports analogue command inputs +/-10 V via the on-chip ADC, digital step/direction via QEI and analog torque/velocity loop closure. The 16 KB RAM is sufficient for cascaded PI controllers plus feed-forward acceleration term; the 512 KB flash holds tuning tables and gain-scheduling maps.
موصى به
Uninterruptible Power Supply (UPS) Controller
UPS controllers combine inverter control, battery management and grid-sync in a single MCU - exactly the workload the MC56F8166VFVE was designed for. The DSC handles double-conversion topology: rectifier PFC stage, battery charger, and inverter output stage. Its SCI/SPI interfaces communicate with the battery monitor and front-panel display; 62 GPIOs drive status LEDs, relays and contactor coils. The 512 KB flash is sufficient for full IEC 62040 control firmware including black-start sequencing.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MC56F8166VFVE — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MC56F8167VFVE | MC56F8165VFVE | MC56F8146VFVE |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-LQFP (20x20) | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same |
| Core | 56800E (16-bit) | 56800E (16-bit) | 56800E (16-bit) | 56800E (16-bit) |
| Core Speed | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Flash Memory | 512 KB | 576 KB (+12%) | 256 KB (-50%) | 128 KB (-75%) |
| Number of I/O | 62 | 62 | 62 | 62 |
| Lifecycle Status | Obsolete | Obsolete / Last-time-buy | Obsolete | Obsolete |
أبرز الفروقات
- Highest memory in 56F8166 family (مقابلMC56F8165VFVE)
- Drops to 128 KB flash, same package (مقابلMC56F8146VFVE)
- Slightly less flash and RAM than 8167 (مقابلMC56F8167VFVE)
ملاحظات التصميم
The MC56F8166VFVE operates from 3.0 V to 3.6 V. Place one 10uF tantalum plus one 0.1uF ceramic decoupling capacitor as close as possible to every VDD/VSS pin pair on the 144-LQFP. The on-chip voltage regulator generates the internal core rail; ensure the VDDA pin has its own filtered ferrite bead or L-C filter to keep switching noise off the ADC reference. Estimated: with 16 KB RAM active at 40 MHz, core current draw stays below 80 mA typical; add 20 percent margin when sizing the 3.3 V regulator.
The 144-LQFP package (20 x 20 mm) has a theta_JA of approximately 45 C/W on a 4-layer JEDEC board. At maximum sustained core activity (40 MHz, peripherals enabled) the IC dissipates roughly 0.5 W, producing a junction-temperature rise of 22 C above ambient. Estimated: at 105 C ambient maximum, the junction reaches 127 C - well below the 150 C silicon limit but tight against industrial margin. Add thermal vias under the exposed pad if present in your layout footprint.
Keep the XTAL/EXTAL traces short and surrounded by a ground guard ring; long traces couple noise into the PLL and degrade SCI timing accuracy. Route the analog AN0-AN11 inputs away from PWM outputs and the SCI lines. For EBI/EMI external bus designs, place series damping resistors (22 to 33 ohm) on D0-D15 to suppress ringing when driving external memory above 20 MHz equivalent bus speeds.
Do not exceed 3.6 V on any VDD pin - the 56800E core lacks 5 V tolerance on digital I/O. Always assert RESET at power-up for at least 100 system clock cycles before releasing it, even when using the internal POR. When migrating from the 128-pin MC56F8165VFGE to this 144-pin variant, verify the unused pins are left floating or pulled to a defined level - floating inputs on 56800E can draw excessive supply current.
معلومات الامتثال
RoHS and lead-free compliance per distributor listings (Mouser, DigiKey, Rochester). AEC-Q100 qualification status not documented in the verified web data - assume not automotive qualified. Halogen-free status not explicitly listed in distributor data. Conflict-minerals compliance inferred from NXP corporate policy.