MC9S08JM16CGT - 48MHz 8-Bit USB MCU | NXP
MPN: MC9S08JM16CGT ✗ انتهى عمره الإنتاجيMC9S08JM16CGT نظرة عامة
An 8-bit microcontroller is a compact embedded-processing component that combines a CPU core, program memory, data memory, peripherals, and communication interfaces on one semiconductor device. Within the embedded-control hierarchy, the MC9S08JM16CGT belongs to the S08 8-bit MCU family and provides a straightforward platform for USB-connected consumer, industrial, and accessory-control products. Its USB connectivity allows the MCU to communicate directly with a host device without requiring a separate USB interface controller.
The device's main headline characteristics are an 8-bit S08 architecture, operation up to 48 MHz, and 16 KB of Flash program memory. Its 48-QFN-EP package supports compact PCB layouts while providing an exposed thermal pad for heat dissipation. The manufacturer documentation also identifies an HC08 instruction set with the added BGND instruction, an on-chip background-debug system, breakpoint capability, an in-circuit emulator module, two comparators, and nine trigger modes for embedded debugging.
At the system level, the S08JM family combines a 24 MHz internal bus frequency with performance modes that allow the device to reach up to 48 MHz. The integrated USB 2.0 full-speed device interface supports standardized serial connectivity, while the on-chip debug resources shorten firmware-development and board-bring-up cycles. These features make the MCU suitable for designs that require more connectivity than a basic GPIO controller but do not need a high-performance 32-bit application processor.
Typical uses include USB human-interface devices, data acquisition and control modules, industrial serial interfaces, consumer accessories, and compact embedded control systems. In a USB peripheral, the MCU can enumerate as a USB device, process control commands, drive displays or indicators, and sample analog signals through its integrated analog peripherals. A 5 V-powered industrial accessory can also use the device while retaining a 3.3 V-compatible supply option.
PCB implementation requires careful treatment of the exposed pad, USB data routing, and the power-supply network. Connect the exposed pad to the appropriate ground plane with a short thermal path, place input and decoupling capacitors close to the supply pins, and route D+ and D+ through a geometry consistent with the selected USB transceiver and impedance requirements. Validate USB signal integrity with the intended host, cable, and enclosure rather than relying only on simulation.
This product page combines the core manufacturer specifications, lifecycle information, package characteristics, USB-focused applications, and design guidance. It also distinguishes documented functions from unavailable engineering details, helping engineers assess the MC9S08JM16CGT for legacy, maintenance, and redesign programs where firmware, tooling, and PCB compatibility are critical constraints.
بدائل مباشرة لـ MC9S08JM16CGT — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MC9S08JM16CGT (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type.
لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.
اطلب بدائلMC9S08JM16CGT الحدود القصوى والخصائص الكهربائية
| Product Type | 8-bit S08JM Flash microcontroller with USB |
| Architecture | HC08 instruction set |
| Maximum Performance | 48 MHz |
| Internal Bus Frequency | 24 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K × 8 bits |
| جهد التغذية | 3.3 V or 5 V |
| USB Interface | USB 2.0 full-speed device |
| العلبة | 48-QFN-EP, 7 mm × 7 mm |
| عدد الأطراف | 48 pins |
| Exposed Pad | Yes |
| نوع التركيب | Surface mount |
| Packaging | Tray |
| Debug Support | Background debugging, breakpoint capability, and in-circuit emulator |
| Debug Comparators | 2 comparators |
| Debugger Trigger Modes | 9 modes |
| On-Chip Events | 8-deep FIFO for change-of-flow addresses and events |
| Analog Peripherals | Integrated analog peripherals |
دليل تكوين أطراف MC9S08JM16CGT 48-qfn-ep, 7 mm × 7 mm
تكوين الأطراف لـ MC9S08JM16CGT (حزمة 48-qfn-ep, 7 mm × 7 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MC9S08JM16CGT.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MC9S08JM16CGT مناسب لـ 6 التطبيقs: USB Human-Interface Devices, Industrial USB Data-Acquisition, Consumer Accessories and Dongles, USB Serial Interfaces, Embedded Control Modules, Test and Measurement Interfaces.
USB Human-Interface Devices
The MC9S08JM16CGT fits USB keyboards, mice, game controllers, and compact control accessories because its integrated USB 2.0 full-speed device interface removes the need for a separate USB controller. The 8-bit S08 core can process input events, drive indicators, and manage device-specific logic while the 48 MHz maximum performance supports responsive firmware. Its 16 KB of Flash provides room for boot code, descriptors, configuration data, and application routines. The main engineering consideration is preserving deterministic USB timing and routing D+ and D- as a controlled impedance pair on the 48-QFN-EP board.
موصى به
Industrial USB Data-Acquisition
The MC9S08JM16CGT is suitable for compact industrial data-acquisition and control modules that send measurements to a USB host. Its integrated analog peripherals reduce the amount of external circuitry required for basic sensing, while 16 KB of Flash accommodates acquisition control, calibration, filtering, and USB descriptors. Up to 48 MHz execution supports responsive event handling without moving to a larger processor. Designers should verify the required ADC resolution, sampling rate, analog noise, and sensor bandwidth in the manufacturer datasheet before finalizing the signal chain.
موصى به
Consumer Accessories and Dongles
The MC9S08JM16CGT can serve as the control device in USB dongles, configuration adapters, and compact consumer accessories. Its integrated USB 2.0 full-speed interface allows a host computer to exchange commands and status data, while the 8-bit processor handles configuration, local control, and simple user-interface functions. The 16 KB Flash capacity is suitable for moderate firmware rather than complex graphical applications. A practical design should include defined USB descriptors, a stable 3.3 V or 5 V supply arrangement, and firmware updates that preserve the device identity across accessory revisions.
موصى به
USB Serial Interfaces
The MC9S08JM16CGT can implement a USB-to-serial bridge or protocol-conversion accessory when its native USB device interface is paired with the required serial transceiver hardware. The MCU can format commands, manage buffering, and translate traffic between a USB host and an industrial or legacy peripheral. Its 48 MHz maximum performance provides margin for protocol processing, and the 16 KB Flash capacity accommodates a state machine, descriptor table, and command parser. Timing-critical designs should use the hardware resources and interrupt structure documented by NXP rather than relying on busy-wait loops.
موصى به
Embedded Control Modules
The MC9S08JM16CGT supports small embedded-control modules that combine USB communication with local logic, analog monitoring, and simple actuator control. The S08JM family provides background debugging, breakpoint capability, two debug comparators, and nine trigger modes, which help validate firmware and timing-dependent behavior. At 16 KB of Flash, the device is most appropriate for focused control tasks rather than large protocol stacks or intensive data processing. Its 48-QFN-EP footprint also requires a compact land pattern with careful exposed-pad thermal and ground-plane design.
موصى به
Test and Measurement Interfaces
The MC9S08JM16CGT can act as the communication and control core of a compact USB-connected test or measurement interface. USB enumeration provides a standard connection to a host, while the MCU organizes control commands, reads basic analog inputs, updates indicators, and returns measured status. The 48 MHz maximum operating rate and background-debug resources support efficient firmware development and event-driven control. Engineers should confirm that the required measurement precision and data throughput remain within the S08JM peripheral capabilities, since the 8-bit architecture and 16 KB Flash are optimized for control tasks rather than high-volume signal analysis.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MC9S08JM16CGT — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج |
|---|---|
| Package | 48-QFN-EP, 7 mm × 7 mm |
| Brand | NXP Semiconductors |
| Architecture | 8-bit S08JM |
| Maximum Performance | 48 MHz |
| Internal Bus Frequency | 24 MHz |
| Flash Memory | 16 KB (16K × 8 bits) |
| Operating Voltage Options | 3.3 V or 5 V |
| USB Interface | USB 2.0 full-speed device |
| Debug Comparators | 2 comparators |
| Debugger Trigger Modes | 9 modes |
أبرز الفروقات
- Larger Flash allocation within the compared S08JM configuration (مقابلMC9S08JM8CGT)
- USB connectivity is integrated into the MCU (مقابلGeneric non-USB 8-bit MCU)
- Integrated event-driven debugging resources (مقابلBasic debug-only microcontroller)
ملاحظات التصميم
Create the footprint directly from the NXP MC9S08JM16 package drawing because the 48-QFN-EP includes an exposed pad whose dimensions and thermal-via requirements must match the board stack-up. The exposed pad is a critical copper feature rather than an optional thermal enhancement; connect it to the recommended ground node with short, low-impedance paths. Validate clearances and solder-paste coverage during PCB assembly trials to avoid bridging the fine-pitch perimeter lands.
Route the USB differential pair as a length-matched, continuously referenced impedance-controlled pair, with the transceiver or series components placed according to the manufacturer reference layout. Keep the pair away from switching nodes, crystal or clock circuits, and discontinuous return paths. Test completed boards with the intended host, cable, and enclosure because USB margin depends on physical implementation and connector behavior in addition to the nominal 2.0 full-speed interface specification.
Follow the NXP datasheet when separating analog and digital supply paths, selecting bypass capacitors, and determining whether a ferrite element is appropriate. Place required decoupling components close to the associated package pins and provide a low-impedance ground reference under the exposed pad. Estimated power consumption should be calculated from the selected bus frequency, active peripherals, output states, and USB operating condition because the headline 48 MHz figure is a performance limit, not a continuous operating-power specification.
Do not substitute an 8-pin or 32-pin MCU merely because it also supports USB. The target uses a 48-QFN-EP footprint, 16 KB of Flash, an HC08-based architecture, and a specific USB/debug peripheral arrangement. Verify every pin, power requirement, exposed-pad connection, and firmware dependency before using MC9S08JM8CGT or a cross-family device as a redesign. The manufacturer MC9S08JM16 datasheet is the controlling document for these checks.
معلومات الامتثال
NXP identifies MC9S08JM16CGT as end-of-life. Current RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status should be confirmed from the manufacturer product-change and environmental documentation for the exact ordering code.