Pemberitahuan Beli Terakhir: MC9S08JM16CGT mendekati akhir hidup. Tanggal order terakhir: Kontak kami. Lihat bagian alternatif yang tersedia →
NXP Semiconductors

MC9S08JM16CGT - 48MHz 8-Bit USB MCU | NXP

MPN: MC9S08JM16CGT ✗ Akhir Hidup
3.3 V or 5 V Vdss 48-QFN-EP, 7 mm × 7 mm Package 24 MHz Speed 16 KB Memory
MOQ: 1 |

MC9S08JM16CGT Ringkasan

The NXP Semiconductors MC9S08JM16CGT is an 8-bit S08JM microcontroller with up to 48 MHz performance, 16 KB of integrated Flash memory, USB 2.0 full-speed device connectivity, and integrated analog peripherals. The device is packaged in a 48-pin QFN with exposed pad on a 7 mm × 7 mm footprint and operates from 3.3 V or 5 V supply levels.

An 8-bit microcontroller is a compact embedded-processing component that combines a CPU core, program memory, data memory, peripherals, and communication interfaces on one semiconductor device. Within the embedded-control hierarchy, the MC9S08JM16CGT belongs to the S08 8-bit MCU family and provides a straightforward platform for USB-connected consumer, industrial, and accessory-control products. Its USB connectivity allows the MCU to communicate directly with a host device without requiring a separate USB interface controller.

The device's main headline characteristics are an 8-bit S08 architecture, operation up to 48 MHz, and 16 KB of Flash program memory. Its 48-QFN-EP package supports compact PCB layouts while providing an exposed thermal pad for heat dissipation. The manufacturer documentation also identifies an HC08 instruction set with the added BGND instruction, an on-chip background-debug system, breakpoint capability, an in-circuit emulator module, two comparators, and nine trigger modes for embedded debugging.

At the system level, the S08JM family combines a 24 MHz internal bus frequency with performance modes that allow the device to reach up to 48 MHz. The integrated USB 2.0 full-speed device interface supports standardized serial connectivity, while the on-chip debug resources shorten firmware-development and board-bring-up cycles. These features make the MCU suitable for designs that require more connectivity than a basic GPIO controller but do not need a high-performance 32-bit application processor.

Typical uses include USB human-interface devices, data acquisition and control modules, industrial serial interfaces, consumer accessories, and compact embedded control systems. In a USB peripheral, the MCU can enumerate as a USB device, process control commands, drive displays or indicators, and sample analog signals through its integrated analog peripherals. A 5 V-powered industrial accessory can also use the device while retaining a 3.3 V-compatible supply option.

PCB implementation requires careful treatment of the exposed pad, USB data routing, and the power-supply network. Connect the exposed pad to the appropriate ground plane with a short thermal path, place input and decoupling capacitors close to the supply pins, and route D+ and D+ through a geometry consistent with the selected USB transceiver and impedance requirements. Validate USB signal integrity with the intended host, cable, and enclosure rather than relying only on simulation.

This product page combines the core manufacturer specifications, lifecycle information, package characteristics, USB-focused applications, and design guidance. It also distinguishes documented functions from unavailable engineering details, helping engineers assess the MC9S08JM16CGT for legacy, maintenance, and redesign programs where firmware, tooling, and PCB compatibility are critical constraints.

Alternatif penggantian untuk MC9S08JM16CGT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MC9S08JM16CGT (sama faktor bentuk dan footprint) — berbeda di dalam Package, Product Type.

NXP Semiconductors
Package: 48-LQFP (7 x 7 mm)
Product Type: 8-bit Microcontroller (MCU)
Bandingkan dengan MC9S08JM16CGT →

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

MC9S08JM16CGT Rating Maksimal & Karakteristik Listrik

Product Type 8-bit S08JM Flash microcontroller with USB
Architecture HC08 instruction set
Maximum Performance 48 MHz
Internal Bus Frequency 24 MHz
Flash Memory 16 KB
Flash Organization 16K × 8 bits
Tegangan Pemuat 3.3 V or 5 V
USB Interface USB 2.0 full-speed device
Paket 48-QFN-EP, 7 mm × 7 mm
Jumlah Pin 48 pins
Exposed Pad Yes
Tipe Mounting Surface mount
Packaging Tray
Debug Support Background debugging, breakpoint capability, and in-circuit emulator
Debug Comparators 2 comparators
Debugger Trigger Modes 9 modes
On-Chip Events 8-deep FIFO for change-of-flow addresses and events
Analog Peripherals Integrated analog peripherals

MC9S08JM16CGT 48-qfn-ep, 7 mm × 7 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk MC9S08JM16CGT (48-qfn-ep, 7 mm × 7 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 48-qfn-ep, 7 mm × 7 mm untuk MC9S08JM16CGT

Tidak ada data diatribut pin yang tersedia untuk MC9S08JM16CGT.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MC9S08JM16CGT cocok untuk 6 aplikasis: USB Human-Interface Devices, Industrial USB Data-Acquisition, Consumer Accessories and Dongles, USB Serial Interfaces, Embedded Control Modules, Test and Measurement Interfaces.

🖥️

USB Human-Interface Devices

The MC9S08JM16CGT fits USB keyboards, mice, game controllers, and compact control accessories because its integrated USB 2.0 full-speed device interface removes the need for a separate USB controller. The 8-bit S08 core can process input events, drive indicators, and manage device-specific logic while the 48 MHz maximum performance supports responsive firmware. Its 16 KB of Flash provides room for boot code, descriptors, configuration data, and application routines. The main engineering consideration is preserving deterministic USB timing and routing D+ and D- as a controlled impedance pair on the 48-QFN-EP board.

🏭

Industrial USB Data-Acquisition

The MC9S08JM16CGT is suitable for compact industrial data-acquisition and control modules that send measurements to a USB host. Its integrated analog peripherals reduce the amount of external circuitry required for basic sensing, while 16 KB of Flash accommodates acquisition control, calibration, filtering, and USB descriptors. Up to 48 MHz execution supports responsive event handling without moving to a larger processor. Designers should verify the required ADC resolution, sampling rate, analog noise, and sensor bandwidth in the manufacturer datasheet before finalizing the signal chain.

📱

Consumer Accessories and Dongles

The MC9S08JM16CGT can serve as the control device in USB dongles, configuration adapters, and compact consumer accessories. Its integrated USB 2.0 full-speed interface allows a host computer to exchange commands and status data, while the 8-bit processor handles configuration, local control, and simple user-interface functions. The 16 KB Flash capacity is suitable for moderate firmware rather than complex graphical applications. A practical design should include defined USB descriptors, a stable 3.3 V or 5 V supply arrangement, and firmware updates that preserve the device identity across accessory revisions.

🌐

USB Serial Interfaces

The MC9S08JM16CGT can implement a USB-to-serial bridge or protocol-conversion accessory when its native USB device interface is paired with the required serial transceiver hardware. The MCU can format commands, manage buffering, and translate traffic between a USB host and an industrial or legacy peripheral. Its 48 MHz maximum performance provides margin for protocol processing, and the 16 KB Flash capacity accommodates a state machine, descriptor table, and command parser. Timing-critical designs should use the hardware resources and interrupt structure documented by NXP rather than relying on busy-wait loops.

🔧

Embedded Control Modules

The MC9S08JM16CGT supports small embedded-control modules that combine USB communication with local logic, analog monitoring, and simple actuator control. The S08JM family provides background debugging, breakpoint capability, two debug comparators, and nine trigger modes, which help validate firmware and timing-dependent behavior. At 16 KB of Flash, the device is most appropriate for focused control tasks rather than large protocol stacks or intensive data processing. Its 48-QFN-EP footprint also requires a compact land pattern with careful exposed-pad thermal and ground-plane design.

🖥️

Test and Measurement Interfaces

The MC9S08JM16CGT can act as the communication and control core of a compact USB-connected test or measurement interface. USB enumeration provides a standard connection to a host, while the MCU organizes control commands, reads basic analog inputs, updates indicators, and returns measured status. The 48 MHz maximum operating rate and background-debug resources support efficient firmware development and event-driven control. Engineers should confirm that the required measurement precision and data throughput remain within the S08JM peripheral capabilities, since the 8-bit architecture and 16 KB Flash are optimized for control tasks rather than high-volume signal analysis.

Ringkasan Produk Direkomendasikan

MC9S08JM16CGT NXP Semiconductors Digunakan di dalam: USB Human-Interface Devices, Industrial USB Data-Acquisition, Consumer Accessories and Dongles, USB Serial Interfaces, Embedded Control Modules, Test and Measurement Interfaces MC9S08JM16 Parent MC9S08JM16 family Digunakan di dalam: USB Human-Interface Devices, Industrial USB Data-Acquisition, Consumer Accessories and Dongles, USB Serial Interfaces, Embedded Control Modules, Test and Measurement Interfaces
What is the MC9S08JM16CGT?
The MC9S08JM16CGT is an 8-bit NXP S08JM microcontroller with 16 KB of Flash memory, USB 2.0 full-speed device connectivity, and operation up to 48 MHz. According to the NXP manufacturer datasheet, it uses the HC08 instruction set with an added BGND instruction and is housed in a 48-QFN-EP package measuring 7 mm × 7 mm. It is intended for embedded USB devices, control systems, data-acquisition equipment, and consumer accessories.
What are the key specifications of MC9S08JM16CGT that engineers should know?
The key specifications are an 8-bit S08 architecture, 48 MHz maximum performance, 16 KB of Flash organized as 16K × 8 bits, and a 24 MHz internal bus. The NXP manufacturer datasheet also identifies USB 2.0 full-speed device support, a 48-QFN-EP package, 3.3 V or 5 V operation, background debugging, two debug comparators, and nine trigger modes. These features define its position as a connectivity-oriented, entry-level 8-bit embedded controller.
Where can I download the MC9S08JM16CGT datasheet PDF?
The MC9S08JM16CGT datasheet PDF is available directly from NXP at the manufacturer's MC9S08JM16 data-sheet URL. The document covers the MC9S08JM16 family and provides the technical reference for the MC9S08JM16CGT configuration. Use the pin-description table and package drawings in that document when creating the PCB footprint, assigning I/O functions, and designing the USB and power-supply connections.
Where can I find the MC9S08JM16CGT pinout?
The authoritative MC9S08JM16CGT pinout is in the pin-description and package-outline sections of the NXP MC9S08JM16 manufacturer datasheet. The device uses a 48-QFN-EP package with an exposed pad, so the land pattern must include the thermal and electrical connection requirements for that pad. Use the manufacturer's package drawing directly for production artwork rather than inferring exposed-pad geometry from the nominal 7 mm × 7 mm body size.
How much memory does the MC9S08JM16CGT contain?
The MC9S08JM16CGT contains 16 KB of Flash program memory, organized as 16K × 8 bits. The NXP manufacturer datasheet identifies the MC9S08JM16 family as an HC08-based platform and states that its internal bus operates at 24 MHz. The 16 KB figure is important when sizing firmware, bootloader code, USB descriptors, configuration data, and application routines for the final embedded product.
Does the MC9S08JM16CGT support USB and at what speed?
Yes, the MC9S08JM16CGT includes an on-chip USB 2.0 full-speed device interface. According to the NXP manufacturer datasheet, this USB connectivity supports standardized serial communication for industrial and consumer applications. The MCU can therefore enumerate as a USB peripheral, exchange control data with a host, and combine USB communication with its embedded processing and integrated analog peripherals.
What is the operating voltage of the MC9S08JM16CGT?
The MC9S08JM16CGT supports 3.3 V or 5 V operation. The NXP MC9S08JM16 manufacturer datasheet is the appropriate source for detailed absolute-maximum ratings, internal regulator behavior, and pin-level voltage limits. The 3.3 V and 5 V descriptions identify supported operating environments, but the complete power architecture must still follow the datasheet requirements for decoupling, grounding, and exposed-pad connection.
Is MC9S08JM16CGT suitable for USB data-acquisition devices?
Yes, the MC9S08JM16CGT is suitable for compact USB data-acquisition and control devices because it combines USB 2.0 full-speed device connectivity with an 8-bit MCU, 16 KB of Flash, and integrated analog peripherals. According to the NXP manufacturer datasheet, the S08JM family also includes background debugging and event-detection resources. Suitability still depends on the required sample rate, sensor bandwidth, ADC accuracy, and total firmware size.
MC9S08JM16CGT vs MC9S08JM8CGT — which is better for a new design?
The MC9S08JM16CGT is the better choice when firmware space is the deciding factor because it provides 16 KB of Flash, while the MC9S08JM8CGT belongs to the lower-memory 8 KB member of the S08JM family. Both devices use the same S08 architecture and USB-oriented platform, but a new design should also confirm package fit, tooling, pin compatibility, and the manufacturer's lifecycle position. For the 16 KB target configuration, the NXP MC9S08JM16 manufacturer datasheet is the controlling reference.
When should I choose MC9S08JM16CGT instead of another 8-bit USB MCU?
Choose the MC9S08JM16CGT when an existing design requires its exact S08JM behavior, 16 KB of Flash, 48 MHz maximum performance, and 48-QFN-EP footprint. It is especially useful for maintenance programs that preserve established firmware, debug tooling, and board layouts. For a wholly new design, select it only after confirming USB implementation, analog requirements, software-tool support, supply availability, and the end-product's expected service life.
What can replace the MC9S08JM16CGT?
No verified pin-to-pin drop-in replacement was identified for the MC9S08JM16CGT. A replacement should not be selected solely by matching the 48-pin count, because Flash size, exposed-pad implementation, USB routing, debug support, peripheral mapping, and software compatibility can differ. The NXP MC9S08JM16 manufacturer datasheet should be used to establish the required pin and electrical functions before approving any substitute.
What is the best drop-in replacement for MC9S08JM16CGT?
The best drop-in replacement is the exact-orderable MC9S08JM16CGT or an authorized exact MPN with the same package and temperature qualification, because no confirmed drop-in substitute is established for this legacy device. The NXP MC9S08JM16 manufacturer datasheet defines the 48-QFN-EP pinout and device functions. For redesigns, evaluate MC9S08JM8CGT as a memory-reduced family member only after confirming that 8 KB of Flash and all required pin functions are acceptable.
Where can I buy MC9S08JM16CGT online?
The MC9S08JM16CGT can be requested through the Request a Quote form on this XAIPART product page. Because NXP identifies the device as end-of-life, stock and manufacturing traceability can vary; the quote form should be used to confirm availability, lot condition, and packaging requirements. Engineers should also disclose the required tray packaging, temperature grade, quantity, and whether the purchase is for production, maintenance, or prototype use.
What is the price of MC9S08JM16CGT?
The current commercial price for the MC9S08JM16CGT should be obtained through the Request a Quote form on this XAIPART page. The manufacturer lists the MCU as end-of-life, so quantity, remaining factory stock, traceability, and packaging can affect commercial availability. Submit the exact MPN MC9S08JM16CGT with your required quantity and delivery schedule to receive a current quotation.
What is the lead time and stock status for MC9S08JM16CGT?
Use the Request a Quote form on this page to request the current lead time and stock confirmation for the MC9S08JM16CGT. NXP identifies this exact device as end-of-life, making supply dependent on remaining factory inventory and channel status. Include your required schedule, annual usage, approved-vendor requirements, and acceptable package format so the quotation reflects the actual procurement constraint.
What debug features does the MC9S08JM16CGT provide?
The MC9S08JM16CGT includes an on-chip background-debugging system, breakpoint capability, and an in-circuit emulator module with two comparators and nine trigger modes. The NXP manufacturer datasheet also identifies an eight-deep FIFO for change-of-flow addresses and on-chip events. These resources support firmware breakpoint control and event-based debugging, reducing the need for external instrumentation during development and production test.
Is MC9S08JM16CGT RoHS compliant and suitable for automotive use?
The RoHS and REACH status of the MC9S08JM16CGT should be confirmed from the current manufacturer product-change and environmental documents before a finished product is released. Automotive qualification must not be inferred from the industrial or extended-temperature options alone. The exact AEC-Q100 qualification, grade, and temperature range must be confirmed for the ordered MPN using NXP's product documentation before use in an automotive design.

Data referensi engineering untuk MC9S08JM16CGT — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MC9S08JM16CGT when maintaining or reproducing a design that depends on its exact 8-bit S08JM architecture, 16 KB of Flash, 48-QFN-EP footprint, integrated USB device interface, and existing debug toolchain. Its 48 MHz maximum performance and on-chip debugging resources make it suitable for USB accessories, compact data-acquisition products, and embedded control modules where code size and USB connectivity are more important than 32-bit processing. Consider MC9S08JM8CGT only when 8 KB of Flash is sufficient and every package, pin, firmware, and peripheral requirement has been checked. Do not treat generic USB microcontrollers as drop-in alternatives: a 48-pin package does not guarantee matching USB routing, exposed-pad implementation, peripheral mapping, or debug behavior. For an end-of-life procurement, request exact-MPN availability and traceability through the quote form, and retain the original datasheet and firmware documentation for long-term maintenance.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Package 48-QFN-EP, 7 mm × 7 mm
Brand NXP Semiconductors
Architecture 8-bit S08JM
Maximum Performance 48 MHz
Internal Bus Frequency 24 MHz
Flash Memory 16 KB (16K × 8 bits)
Operating Voltage Options 3.3 V or 5 V
USB Interface USB 2.0 full-speed device
Debug Comparators 2 comparators
Debugger Trigger Modes 9 modes

Diferensiator Kunci

  • Larger Flash allocation within the compared S08JM configuration (vsMC9S08JM8CGT)
  • USB connectivity is integrated into the MCU (vsGeneric non-USB 8-bit MCU)
  • Integrated event-driven debugging resources (vsBasic debug-only microcontroller)

Catatan Desain

Create the footprint directly from the NXP MC9S08JM16 package drawing because the 48-QFN-EP includes an exposed pad whose dimensions and thermal-via requirements must match the board stack-up. The exposed pad is a critical copper feature rather than an optional thermal enhancement; connect it to the recommended ground node with short, low-impedance paths. Validate clearances and solder-paste coverage during PCB assembly trials to avoid bridging the fine-pitch perimeter lands.

Route the USB differential pair as a length-matched, continuously referenced impedance-controlled pair, with the transceiver or series components placed according to the manufacturer reference layout. Keep the pair away from switching nodes, crystal or clock circuits, and discontinuous return paths. Test completed boards with the intended host, cable, and enclosure because USB margin depends on physical implementation and connector behavior in addition to the nominal 2.0 full-speed interface specification.

Follow the NXP datasheet when separating analog and digital supply paths, selecting bypass capacitors, and determining whether a ferrite element is appropriate. Place required decoupling components close to the associated package pins and provide a low-impedance ground reference under the exposed pad. Estimated power consumption should be calculated from the selected bus frequency, active peripherals, output states, and USB operating condition because the headline 48 MHz figure is a performance limit, not a continuous operating-power specification.

Do not substitute an 8-pin or 32-pin MCU merely because it also supports USB. The target uses a 48-QFN-EP footprint, 16 KB of Flash, an HC08-based architecture, and a specific USB/debug peripheral arrangement. Verify every pin, power requirement, exposed-pad connection, and firmware dependency before using MC9S08JM8CGT or a cross-family device as a redesign. The manufacturer MC9S08JM16 datasheet is the controlling document for these checks.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

NXP identifies MC9S08JM16CGT as end-of-life. Current RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status should be confirmed from the manufacturer product-change and environmental documentation for the exact ordering code.

Pencarian Terkait

MC9S08JM16CGT datasheet MC9S08JM16CGT pinout MC9S08JM16CGT datasheet pdf MC9S08JM16CGT schematic MC9S08JM16CGT equivalent MC9S08JM16CGT replacement MC9S08JM16CGT cross reference MC9S08JM16CGT vs MC9S08JM8CGT MC9S08JM16CGT footprint MC9S08JM16CGT price MC9S08JM16CGT stock NXP MC9S08JM16CGT MC9S08JM16 48MHz USB MCU MC9S08JM16CGT USB application circuit

Komponen dan Istilah Terkait

NXP Semiconductors MC9S08JM16CGT MC9S08JM16 MC9S08JM8CGT S08JM S08 HC08 instruction set 8-bit microcontroller Flash memory embedded controller USB 2.0 full-speed USB device controller 48 MHz 24 MHz internal bus 16 KB Flash 48-QFN-EP QFN package family surface-mount technology exposed pad background debugging breakpoint capability in-circuit emulator debug comparators industrial USB control consumer USB accessory
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ