MC9S08JM16CGT - 48MHz 8-Bit USB MCU | NXP
MPN: MC9S08JM16CGT ✗ Tapus ng BuhayMC9S08JM16CGT Ulas
An 8-bit microcontroller is a compact embedded-processing component that combines a CPU core, program memory, data memory, peripherals, and communication interfaces on one semiconductor device. Within the embedded-control hierarchy, the MC9S08JM16CGT belongs to the S08 8-bit MCU family and provides a straightforward platform for USB-connected consumer, industrial, and accessory-control products. Its USB connectivity allows the MCU to communicate directly with a host device without requiring a separate USB interface controller.
The device's main headline characteristics are an 8-bit S08 architecture, operation up to 48 MHz, and 16 KB of Flash program memory. Its 48-QFN-EP package supports compact PCB layouts while providing an exposed thermal pad for heat dissipation. The manufacturer documentation also identifies an HC08 instruction set with the added BGND instruction, an on-chip background-debug system, breakpoint capability, an in-circuit emulator module, two comparators, and nine trigger modes for embedded debugging.
At the system level, the S08JM family combines a 24 MHz internal bus frequency with performance modes that allow the device to reach up to 48 MHz. The integrated USB 2.0 full-speed device interface supports standardized serial connectivity, while the on-chip debug resources shorten firmware-development and board-bring-up cycles. These features make the MCU suitable for designs that require more connectivity than a basic GPIO controller but do not need a high-performance 32-bit application processor.
Typical uses include USB human-interface devices, data acquisition and control modules, industrial serial interfaces, consumer accessories, and compact embedded control systems. In a USB peripheral, the MCU can enumerate as a USB device, process control commands, drive displays or indicators, and sample analog signals through its integrated analog peripherals. A 5 V-powered industrial accessory can also use the device while retaining a 3.3 V-compatible supply option.
PCB implementation requires careful treatment of the exposed pad, USB data routing, and the power-supply network. Connect the exposed pad to the appropriate ground plane with a short thermal path, place input and decoupling capacitors close to the supply pins, and route D+ and D+ through a geometry consistent with the selected USB transceiver and impedance requirements. Validate USB signal integrity with the intended host, cable, and enclosure rather than relying only on simulation.
This product page combines the core manufacturer specifications, lifecycle information, package characteristics, USB-focused applications, and design guidance. It also distinguishes documented functions from unavailable engineering details, helping engineers assess the MC9S08JM16CGT for legacy, maintenance, and redesign programs where firmware, tooling, and PCB compatibility are critical constraints.
Mga alternatibo na pwedeng ilagay na MC9S08JM16CGT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MC9S08JM16CGT (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboMC9S08JM16CGT Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 8-bit S08JM Flash microcontroller with USB |
| Architecture | HC08 instruction set |
| Maximum Performance | 48 MHz |
| Internal Bus Frequency | 24 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K × 8 bits |
| Volte ng Pagbibigay | 3.3 V or 5 V |
| USB Interface | USB 2.0 full-speed device |
| Packhaging | 48-QFN-EP, 7 mm × 7 mm |
| Bilang ng Pin | 48 pins |
| Exposed Pad | Yes |
| Uri ng Pagpapasok | Surface mount |
| Packaging | Tray |
| Debug Support | Background debugging, breakpoint capability, and in-circuit emulator |
| Debug Comparators | 2 comparators |
| Debugger Trigger Modes | 9 modes |
| On-Chip Events | 8-deep FIFO for change-of-flow addresses and events |
| Analog Peripherals | Integrated analog peripherals |
Gabay sa Pin Configuration ng MC9S08JM16CGT 48-qfn-ep, 7 mm × 7 mm
Pin configuration para sa MC9S08JM16CGT (48-qfn-ep, 7 mm × 7 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MC9S08JM16CGT.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MC9S08JM16CGT ay nararapat para sa 6 aplikasyons: USB Human-Interface Devices, Industrial USB Data-Acquisition, Consumer Accessories and Dongles, USB Serial Interfaces, Embedded Control Modules, Test and Measurement Interfaces.
USB Human-Interface Devices
The MC9S08JM16CGT fits USB keyboards, mice, game controllers, and compact control accessories because its integrated USB 2.0 full-speed device interface removes the need for a separate USB controller. The 8-bit S08 core can process input events, drive indicators, and manage device-specific logic while the 48 MHz maximum performance supports responsive firmware. Its 16 KB of Flash provides room for boot code, descriptors, configuration data, and application routines. The main engineering consideration is preserving deterministic USB timing and routing D+ and D- as a controlled impedance pair on the 48-QFN-EP board.
Inirekomenda
Industrial USB Data-Acquisition
The MC9S08JM16CGT is suitable for compact industrial data-acquisition and control modules that send measurements to a USB host. Its integrated analog peripherals reduce the amount of external circuitry required for basic sensing, while 16 KB of Flash accommodates acquisition control, calibration, filtering, and USB descriptors. Up to 48 MHz execution supports responsive event handling without moving to a larger processor. Designers should verify the required ADC resolution, sampling rate, analog noise, and sensor bandwidth in the manufacturer datasheet before finalizing the signal chain.
Inirekomenda
Consumer Accessories and Dongles
The MC9S08JM16CGT can serve as the control device in USB dongles, configuration adapters, and compact consumer accessories. Its integrated USB 2.0 full-speed interface allows a host computer to exchange commands and status data, while the 8-bit processor handles configuration, local control, and simple user-interface functions. The 16 KB Flash capacity is suitable for moderate firmware rather than complex graphical applications. A practical design should include defined USB descriptors, a stable 3.3 V or 5 V supply arrangement, and firmware updates that preserve the device identity across accessory revisions.
Inirekomenda
USB Serial Interfaces
The MC9S08JM16CGT can implement a USB-to-serial bridge or protocol-conversion accessory when its native USB device interface is paired with the required serial transceiver hardware. The MCU can format commands, manage buffering, and translate traffic between a USB host and an industrial or legacy peripheral. Its 48 MHz maximum performance provides margin for protocol processing, and the 16 KB Flash capacity accommodates a state machine, descriptor table, and command parser. Timing-critical designs should use the hardware resources and interrupt structure documented by NXP rather than relying on busy-wait loops.
Inirekomenda
Embedded Control Modules
The MC9S08JM16CGT supports small embedded-control modules that combine USB communication with local logic, analog monitoring, and simple actuator control. The S08JM family provides background debugging, breakpoint capability, two debug comparators, and nine trigger modes, which help validate firmware and timing-dependent behavior. At 16 KB of Flash, the device is most appropriate for focused control tasks rather than large protocol stacks or intensive data processing. Its 48-QFN-EP footprint also requires a compact land pattern with careful exposed-pad thermal and ground-plane design.
Inirekomenda
Test and Measurement Interfaces
The MC9S08JM16CGT can act as the communication and control core of a compact USB-connected test or measurement interface. USB enumeration provides a standard connection to a host, while the MCU organizes control commands, reads basic analog inputs, updates indicators, and returns measured status. The 48 MHz maximum operating rate and background-debug resources support efficient firmware development and event-driven control. Engineers should confirm that the required measurement precision and data throughput remain within the S08JM peripheral capabilities, since the 8-bit architecture and 16 KB Flash are optimized for control tasks rather than high-volume signal analysis.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MC9S08JM16CGT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Package | 48-QFN-EP, 7 mm × 7 mm |
| Brand | NXP Semiconductors |
| Architecture | 8-bit S08JM |
| Maximum Performance | 48 MHz |
| Internal Bus Frequency | 24 MHz |
| Flash Memory | 16 KB (16K × 8 bits) |
| Operating Voltage Options | 3.3 V or 5 V |
| USB Interface | USB 2.0 full-speed device |
| Debug Comparators | 2 comparators |
| Debugger Trigger Modes | 9 modes |
Pangunahing mga Pagkakaiba
- Larger Flash allocation within the compared S08JM configuration (kumpara saMC9S08JM8CGT)
- USB connectivity is integrated into the MCU (kumpara saGeneric non-USB 8-bit MCU)
- Integrated event-driven debugging resources (kumpara saBasic debug-only microcontroller)
Talaan ng Disenyo
Create the footprint directly from the NXP MC9S08JM16 package drawing because the 48-QFN-EP includes an exposed pad whose dimensions and thermal-via requirements must match the board stack-up. The exposed pad is a critical copper feature rather than an optional thermal enhancement; connect it to the recommended ground node with short, low-impedance paths. Validate clearances and solder-paste coverage during PCB assembly trials to avoid bridging the fine-pitch perimeter lands.
Route the USB differential pair as a length-matched, continuously referenced impedance-controlled pair, with the transceiver or series components placed according to the manufacturer reference layout. Keep the pair away from switching nodes, crystal or clock circuits, and discontinuous return paths. Test completed boards with the intended host, cable, and enclosure because USB margin depends on physical implementation and connector behavior in addition to the nominal 2.0 full-speed interface specification.
Follow the NXP datasheet when separating analog and digital supply paths, selecting bypass capacitors, and determining whether a ferrite element is appropriate. Place required decoupling components close to the associated package pins and provide a low-impedance ground reference under the exposed pad. Estimated power consumption should be calculated from the selected bus frequency, active peripherals, output states, and USB operating condition because the headline 48 MHz figure is a performance limit, not a continuous operating-power specification.
Do not substitute an 8-pin or 32-pin MCU merely because it also supports USB. The target uses a 48-QFN-EP footprint, 16 KB of Flash, an HC08-based architecture, and a specific USB/debug peripheral arrangement. Verify every pin, power requirement, exposed-pad connection, and firmware dependency before using MC9S08JM8CGT or a cross-family device as a redesign. The manufacturer MC9S08JM16 datasheet is the controlling document for these checks.
Impormasyon ng Pagsunod sa Kautusan
NXP identifies MC9S08JM16CGT as end-of-life. Current RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status should be confirmed from the manufacturer product-change and environmental documentation for the exact ordering code.