MC9S12C96VPBE - 16-Bit 25MHz HCS12 MCU, 96KB Flash, 52-LQFP
MPN: MC9S12C96VPBE ✓ نشطMC9S12C96VPBE نظرة عامة
An HCS12 microcontroller is a 16-bit embedded processing device built around the HCS12 core architecture. The term microcontroller describes the integration of a processor core, program memory, data memory, peripheral interfaces and control logic on a single integrated circuit. Within the broader semiconductor hierarchy, the MC9S12C96VPBE is a microcontroller, a type of embedded processor and controller, and a member of NXP's HCS12/S12C product family. It is intended for applications in which a dedicated controller handles real-time input processing, peripheral control and system sequencing without requiring a separate host processor.
The three defining characteristics of this device are its 25 MHz maximum operating frequency, 96 KB of flash memory and 52-pin LQFP packaging. The 16-bit architecture provides a larger native data width than an 8-bit controller, while the 96 KB flash allocation provides space for application code and fixed firmware. The 10 x 10 mm surface-mount package supports compact controller boards but requires careful land-pattern design, thermal planning and soldering control during assembly.
The HCS12 platform provides the architectural foundation for real-time embedded control through an integrated core and dedicated peripherals. Because the MC9S12C96VPBE is identified as an S12C automotive and industrial MCU, it is appropriate to evaluate it for industrial controllers, electronic control modules, actuator controllers and other embedded systems. Development activity typically includes configuring the MCU hardware with the appropriate NXP or third-party HCS12 toolchain, allocating flash-resident code, and assigning the available pins according to the device's pin-description and multiplexing tables in the manufacturer datasheet.
Typical application areas include industrial machine and motor controllers, automotive body and auxiliary control modules, sensor-conditioning hubs, communications controllers and compact embedded control products. Its 96 KB flash budget suits moderate firmware loads involving state-machine logic, monitoring, diagnostics and communication protocols. The 52-LQFP package also permits a smaller board than many older high-pin-count microcontrollers, which is valuable when the enclosure limits connector placement and thermal dissipation area.
The principal design consideration is package-level: the 0.5 mm lead pitch of a 52-LQFP requires a stable PCB footprint, adequate solder-mask and paste control, and inspection that can resolve closely spaced leads. Firmware and peripheral configurations must also be checked against the MC9S12C96 pin multiplexing and operating limits before the design is released for production.
This page combines the verified NXP product identity and distributor technical summaries with engineering-focused packaging, comparison and design guidance. It also identifies related HCS12 controllers that can be evaluated when memory density or qualification requirements differ from those of the MC9S12C96VPBE.
بدائل مباشرة لـ MC9S12C96VPBE — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MC9S12C96VPBE (نفس عامل الشكل والبصمة) — يختلف في Package, Program Memory Size, Supply Voltage, Core Processor, Flash Memory.
MC9S12GC96MPBE
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MC9S12GC16CPBE
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MC9S12C128VPBE
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MC9S12C96VPBE الحدود القصوى والخصائص الكهربائية
| Product Type | 16-bit HCS12 microcontroller |
| Maximum CPU Frequency | 25 MHz |
| Flash Memory | 96 KB (96K x 8) |
| Core Architecture | HCS12 |
| Product Series | S12C |
| Package Type | 52-LQFP (10 x 10 mm) |
| Terminal Count | 52 pins |
| نوع التركيب | Surface mount |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Temperature Grade | Industrial |
| Manufacturing Technology | TSMC3 EPP |
دليل تكوين أطراف MC9S12C96VPBE square
تكوين الأطراف لـ MC9S12C96VPBE (حزمة square). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MC9S12C96VPBE.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MC9S12C96VPBE مناسب لـ 6 التطبيقs: Industrial Machine Control Module, Automotive Auxiliary Control Unit, Sensor Conditioning and Diagnostic Hub, Motor and Actuator Sequencer, Communications Gateway Controller, Embedded Environmental Monitoring Unit.
Industrial Machine Control Module
The MC9S12C96VPBE fits compact industrial controllers that execute sequencing, monitor discrete and analog inputs, and drive actuators through dedicated peripherals. Its 16-bit HCS12 core operates at up to 25 MHz, providing a reasonable instruction rate for real-time control loops, while 96 KB of flash accommodates application firmware, diagnostics and parameter tables. The 52-LQFP 10 x 10 mm package limits board footprint in tightly packaged control equipment. Engineering validation should confirm the required timer, serial-interface, analog and communication pins in the manufacturer pin-multiplexing tables before routing the PCB.
موصى به
Automotive Auxiliary Control Unit
MC9S12C96VPBE is identified as an S12C automotive and industrial microcontroller, making it applicable to auxiliary control units handling switches, lamps, sensors and body-level logic. Its 25 MHz HCS12 core supports responsive state-machine and periodic-processing tasks, and 96 KB of flash provides space for firmware and vehicle-specific configuration data. The industrial temperature-grade designation supports operation across wider ambient conditions than a commercial-grade controller. For automotive production, verify program-specific qualification, errata status, transient immunity and diagnostic requirements rather than relying on the general product description alone.
موصى به
Sensor Conditioning and Diagnostic Hub
The MC9S12C96VPBE can serve as the central controller in a sensor hub that samples inputs, applies calibration, records faults and forwards results to a higher-level controller. The 16-bit architecture and 25 MHz operating rate suit moderate data-processing workloads, while 96 KB of flash leaves room for calibration tables and diagnostic routines. Its compact 52-LQFP package helps reduce the size of a distributed sensing node. The engineering effort should focus on confirming the required ADC channels, sample rates, sensor interfaces and pin-assignment options for the exact configuration.
موصى به
Motor and Actuator Sequencer
For motor-startup sequencing, pump control or electromechanical actuator management, the MC9S12C96VPBE provides a compact platform for timing, state management and protection handling. The 25 MHz HCS12 core can execute fast control sequencing, and the 96 KB flash allocation supports stored parameter sets, fault logs and state-machine code. The 52-LQFP package is practical for space-constrained actuator boards. Designers must confirm timer resources, PWM or capture functions, external drivers, protection inputs and the accuracy of any position feedback before committing the footprint.
موصى به
Communications Gateway Controller
MC9S12C96VPBE is appropriate for a protocol bridge or communications gateway that manages buffering, framing, address decoding and supervisory tasks around a host processor. Its 16-bit HCS12 architecture runs at up to 25 MHz, and 96 KB of flash can hold protocol handlers and routing tables. The compact 52-LQFP footprint preserves PCB area for transceivers and connectors. Before layout, verify the required serial channels, external memory interface, clock source and interrupt topology, since those functions determine whether a specific S12 variant can reuse the same board design.
موصى به
Embedded Environmental Monitoring Unit
The MC9S12C96VPBE can supervise an environmental monitoring product that reads sensors, applies thresholds, controls indicators and reports operating status. The 25 MHz HCS12 core handles periodic acquisition and logic, and 96 KB of flash supports firmware revisions and stored configuration. A 52-LQFP package keeps the controller board compact where sensors, radios and connectors compete for area. Confirm the ADC resolution and channel count, sensor interfaces, low-power modes and wake-up resources in the manufacturer datasheet before defining the final schematic.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MC9S12C96VPBE — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MC9S12GC96MPBE | MC9S12GC16CPBE | MC9S12C128VPBE |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 52-LQFP (10 x 10 mm) | 52-LQFP (10 x 10 mm) - same | 52-LQFP (10 x 10 mm) - same | 52-LQFP - same package family |
| Product Series | S12C automotive and industrial MCU | HCS12 MCU | HCS12 MCU | S12 family |
أبرز الفروقات
- Identified for automotive and industrial S12C applications (مقابلMC9S12GC96MPBE)
- Published S12C device identity with 96 KB flash (مقابلMC9S12GC16CPBE)
- Direct manufacturer and distributor specification coverage (مقابلMC9S12C128VPBE)
ملاحظات التصميم
Create the board footprint from the 52-LQFP mechanical drawing in the manufacturer datasheet rather than from a generic 52-pin library symbol. Verify pin-1 identification, lead pitch, body dimensions, courtyard and solder-mask clearance. The 10 x 10 mm body leaves limited routing escape space, so place decoupling and clock components close to their assigned pins and avoid routing high-speed or sensitive signals beneath the package where practical.
Do not treat a shared package and matching headline memory rating as proof of interchangeability. HCS12 devices can assign the same terminals to different peripheral functions, and reset, clocking, debug and power configurations must also align. Compare the manufacturer pin tables, memory map, interrupt vectors and errata for MC9S12C96VPBE and the proposed alternative before approving a substitution for an existing PCB.
Plan the 52-LQFP land pattern for manufacturing inspection as well as electrical performance. Confirm the PCB minimum trace and space rules, paste aperture adjustments, via-in-pad policy and solder-mask dams against the package drawing and assembly capability. Because closely spaced gull-wing leads can solder-bridge during reflow, specify a controlled thermal profile and use post-assembly inspection under magnification.
معلومات الامتثال
The device is identified as an S12C automotive and industrial MCU with industrial temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals declaration appears in the cited records.