MC9S12C96VPBE - 16-Bit 25MHz HCS12 MCU, 96KB Flash, 52-LQFP
MPN: MC9S12C96VPBE ✓ 啟用中MC9S12C96VPBE 概覽
An HCS12 microcontroller is a 16-bit embedded processing device built around the HCS12 core architecture. The term microcontroller describes the integration of a processor core, program memory, data memory, peripheral interfaces and control logic on a single integrated circuit. Within the broader semiconductor hierarchy, the MC9S12C96VPBE is a microcontroller, a type of embedded processor and controller, and a member of NXP's HCS12/S12C product family. It is intended for applications in which a dedicated controller handles real-time input processing, peripheral control and system sequencing without requiring a separate host processor.
The three defining characteristics of this device are its 25 MHz maximum operating frequency, 96 KB of flash memory and 52-pin LQFP packaging. The 16-bit architecture provides a larger native data width than an 8-bit controller, while the 96 KB flash allocation provides space for application code and fixed firmware. The 10 x 10 mm surface-mount package supports compact controller boards but requires careful land-pattern design, thermal planning and soldering control during assembly.
The HCS12 platform provides the architectural foundation for real-time embedded control through an integrated core and dedicated peripherals. Because the MC9S12C96VPBE is identified as an S12C automotive and industrial MCU, it is appropriate to evaluate it for industrial controllers, electronic control modules, actuator controllers and other embedded systems. Development activity typically includes configuring the MCU hardware with the appropriate NXP or third-party HCS12 toolchain, allocating flash-resident code, and assigning the available pins according to the device's pin-description and multiplexing tables in the manufacturer datasheet.
Typical application areas include industrial machine and motor controllers, automotive body and auxiliary control modules, sensor-conditioning hubs, communications controllers and compact embedded control products. Its 96 KB flash budget suits moderate firmware loads involving state-machine logic, monitoring, diagnostics and communication protocols. The 52-LQFP package also permits a smaller board than many older high-pin-count microcontrollers, which is valuable when the enclosure limits connector placement and thermal dissipation area.
The principal design consideration is package-level: the 0.5 mm lead pitch of a 52-LQFP requires a stable PCB footprint, adequate solder-mask and paste control, and inspection that can resolve closely spaced leads. Firmware and peripheral configurations must also be checked against the MC9S12C96 pin multiplexing and operating limits before the design is released for production.
This page combines the verified NXP product identity and distributor technical summaries with engineering-focused packaging, comparison and design guidance. It also identifies related HCS12 controllers that can be evaluated when memory density or qualification requirements differ from those of the MC9S12C96VPBE.
直接替換替代品,適用於 MC9S12C96VPBE — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MC9S12C96VPBE (相同外形與佔位) — 差異在於 Package, Program Memory Size, Supply Voltage, Core Processor, Flash Memory.
MC9S12GC96MPBE
✅ 直接替換聯絡詢價
查看資料表 →MC9S12GC16CPBE
✅ 直接替換聯絡詢價
查看資料表 →MC9S12C128VPBE
✅ 直接替換📋 參考替代品(不在目錄中)
MC9S12C96VPBE 最大額定值與電氣特性
| Product Type | 16-bit HCS12 microcontroller |
| Maximum CPU Frequency | 25 MHz |
| Flash Memory | 96 KB (96K x 8) |
| Core Architecture | HCS12 |
| Product Series | S12C |
| Package Type | 52-LQFP (10 x 10 mm) |
| Terminal Count | 52 pins |
| 安裝類型 | Surface mount |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Temperature Grade | Industrial |
| Manufacturing Technology | TSMC3 EPP |
MC9S12C96VPBE square 腳位配置指南
MC9S12C96VPBE(square 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MC9S12C96VPBE.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC9S12C96VPBE 適用於 6 應用s: Industrial Machine Control Module, Automotive Auxiliary Control Unit, Sensor Conditioning and Diagnostic Hub, Motor and Actuator Sequencer, Communications Gateway Controller, Embedded Environmental Monitoring Unit.
Industrial Machine Control Module
The MC9S12C96VPBE fits compact industrial controllers that execute sequencing, monitor discrete and analog inputs, and drive actuators through dedicated peripherals. Its 16-bit HCS12 core operates at up to 25 MHz, providing a reasonable instruction rate for real-time control loops, while 96 KB of flash accommodates application firmware, diagnostics and parameter tables. The 52-LQFP 10 x 10 mm package limits board footprint in tightly packaged control equipment. Engineering validation should confirm the required timer, serial-interface, analog and communication pins in the manufacturer pin-multiplexing tables before routing the PCB.
推薦
Automotive Auxiliary Control Unit
MC9S12C96VPBE is identified as an S12C automotive and industrial microcontroller, making it applicable to auxiliary control units handling switches, lamps, sensors and body-level logic. Its 25 MHz HCS12 core supports responsive state-machine and periodic-processing tasks, and 96 KB of flash provides space for firmware and vehicle-specific configuration data. The industrial temperature-grade designation supports operation across wider ambient conditions than a commercial-grade controller. For automotive production, verify program-specific qualification, errata status, transient immunity and diagnostic requirements rather than relying on the general product description alone.
推薦
Sensor Conditioning and Diagnostic Hub
The MC9S12C96VPBE can serve as the central controller in a sensor hub that samples inputs, applies calibration, records faults and forwards results to a higher-level controller. The 16-bit architecture and 25 MHz operating rate suit moderate data-processing workloads, while 96 KB of flash leaves room for calibration tables and diagnostic routines. Its compact 52-LQFP package helps reduce the size of a distributed sensing node. The engineering effort should focus on confirming the required ADC channels, sample rates, sensor interfaces and pin-assignment options for the exact configuration.
推薦
Motor and Actuator Sequencer
For motor-startup sequencing, pump control or electromechanical actuator management, the MC9S12C96VPBE provides a compact platform for timing, state management and protection handling. The 25 MHz HCS12 core can execute fast control sequencing, and the 96 KB flash allocation supports stored parameter sets, fault logs and state-machine code. The 52-LQFP package is practical for space-constrained actuator boards. Designers must confirm timer resources, PWM or capture functions, external drivers, protection inputs and the accuracy of any position feedback before committing the footprint.
推薦
Communications Gateway Controller
MC9S12C96VPBE is appropriate for a protocol bridge or communications gateway that manages buffering, framing, address decoding and supervisory tasks around a host processor. Its 16-bit HCS12 architecture runs at up to 25 MHz, and 96 KB of flash can hold protocol handlers and routing tables. The compact 52-LQFP footprint preserves PCB area for transceivers and connectors. Before layout, verify the required serial channels, external memory interface, clock source and interrupt topology, since those functions determine whether a specific S12 variant can reuse the same board design.
推薦
Embedded Environmental Monitoring Unit
The MC9S12C96VPBE can supervise an environmental monitoring product that reads sensors, applies thresholds, controls indicators and reports operating status. The 25 MHz HCS12 core handles periodic acquisition and logic, and 96 KB of flash supports firmware revisions and stored configuration. A 52-LQFP package keeps the controller board compact where sensors, radios and connectors compete for area. Confirm the ADC resolution and channel count, sensor interfaces, low-power modes and wake-up resources in the manufacturer datasheet before defining the final schematic.
推薦
推薦產品摘要
工程參考資料,適用於 MC9S12C96VPBE — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC9S12GC96MPBE | MC9S12GC16CPBE | MC9S12C128VPBE |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 52-LQFP (10 x 10 mm) | 52-LQFP (10 x 10 mm) - same | 52-LQFP (10 x 10 mm) - same | 52-LQFP - same package family |
| Product Series | S12C automotive and industrial MCU | HCS12 MCU | HCS12 MCU | S12 family |
主要差異化特點
- Identified for automotive and industrial S12C applications (對比MC9S12GC96MPBE)
- Published S12C device identity with 96 KB flash (對比MC9S12GC16CPBE)
- Direct manufacturer and distributor specification coverage (對比MC9S12C128VPBE)
設計說明
Create the board footprint from the 52-LQFP mechanical drawing in the manufacturer datasheet rather than from a generic 52-pin library symbol. Verify pin-1 identification, lead pitch, body dimensions, courtyard and solder-mask clearance. The 10 x 10 mm body leaves limited routing escape space, so place decoupling and clock components close to their assigned pins and avoid routing high-speed or sensitive signals beneath the package where practical.
Do not treat a shared package and matching headline memory rating as proof of interchangeability. HCS12 devices can assign the same terminals to different peripheral functions, and reset, clocking, debug and power configurations must also align. Compare the manufacturer pin tables, memory map, interrupt vectors and errata for MC9S12C96VPBE and the proposed alternative before approving a substitution for an existing PCB.
Plan the 52-LQFP land pattern for manufacturing inspection as well as electrical performance. Confirm the PCB minimum trace and space rules, paste aperture adjustments, via-in-pad policy and solder-mask dams against the package drawing and assembly capability. Because closely spaced gull-wing leads can solder-bridge during reflow, specify a controlled thermal profile and use post-assembly inspection under magnification.
合規資訊
The device is identified as an S12C automotive and industrial MCU with industrial temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals declaration appears in the cited records.