Texas Instruments

MSP430P313IDL - 16-Bit 3MHz Low-Power MCU | Texas Instruments

MPN: MSP430P313IDL ✓ نشط
2.5 V to 5.5 V Vdss 400 µA typical at 1 MHz and 3 V Id 56-pin SSOP (0.295 inch, 7.50 mm body width) Package 3 MHz Speed 8 KB OTP (8K x 8 bits) Memory
الحد الأدنى للطلب: 1 |

MSP430P313IDL نظرة عامة

Texas Instruments MSP430P313IDL is a 16-bit RISC mixed-signal microcontroller with a 3 MHz operating frequency, 8 KB of one-time-programmable memory, 256 B of RAM, and a 92-segment LCD driver, housed in a 56-pin SSOP package. Its 2.5 V to 5.5 V operating range and low-power modes make it suitable for battery-powered instruments, utility meters, industrial panels, and portable measurement equipment.

A mixed-signal microcontroller combines a low-power digital processing core with analog and peripheral functions on one integrated device. The MSP430 family belongs to the embedded microcontroller hierarchy and uses a 16-bit RISC architecture optimized for autonomous, power-constrained control. Rather than driving a separate display controller, the MSP430P313IDL includes a segmented LCD interface capable of directly supporting a 92-segment display.

Key features include an 8 KB OTP program memory organized as 8K x 8 bits, 256 B of RAM, and operation up to 3 MHz. Typical operating current is 400 µA at 1 MHz and 3 V. Five low-power operating modes support battery-operated designs, with standby current of 1.3 µA and RAM-retention or off-mode current of 0.1 µA. Standby wake-up time is 6 µs, allowing the controller to respond quickly after a user or measurement event.

The device combines a 16-bit CPU with 10-bit ADC, timer, communication, and LCD-segment resources intended for mixed-signal measurement systems. Its one-time-programmable memory is suitable for production firmware that does not require field reprogramming. The 56-pin SSOP package provides a conventional surface-mount gull-wing footprint and supports integration into compact metering and control boards.

Typical applications include single-phase energy meters, industrial process-monitoring panels, portable environmental instruments, laboratory data loggers, digital thermometers, and compact HMI controllers. In each case, the internal LCD driver reduces the number of external components, while the low-power modes preserve battery life between measurement or user-interface events.

Power budgeting and startup behavior deserve attention in battery designs. Calculate average current from active acquisition time, standby time, and display load rather than using the 400 µA operating-current figure alone. Place the decoupling capacitor close to the supply pins and follow the manufacturer datasheet for LCD segment drive, external crystal, and unused-pin requirements.

This product record combines the manufacturer-device characteristics with package, memory, LCD, power-mode, and low-power application details. It also distinguishes documented functions from parameters that still require confirmation from the complete MSP430P313 datasheet and the pin-description table.

بدائل مباشرة لـ MSP430P313IDL — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

MSP430F313IDL

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 56-SSOP (BSSOP)
Uses 8 KB flash program memory instead of 8 KB OTP, enabling field reprogramming while retaining the same 56-SSOP footprint and 3 MHz 16-bit core class

📋 بديل مرجعي (غير موجود في الكتالوج)

MSP430P312IDL

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 56-SSOP (BSSOP)
Lower P312-family mixed-signal resource count than P313 while retaining the 56-SSOP footprint, 16-bit RISC core, 8 KB memory class, and low-power operating mode

📋 بديل مرجعي (غير موجود في الكتالوج)

MSP430P311IDL

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 56-SSOP (BSSOP)
Lower P311-family analog and ADC resource count than P313, while preserving the 56-SSOP footprint, 3 MHz 16-bit architecture, and low-power design

📋 بديل مرجعي (غير موجود في الكتالوج)

MSP430F312IDL

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 56-SSOP (BSSOP)
Combines the P312-family mixed-signal resource level with 8 KB-class flash program memory instead of the P313IDL OTP memory, with the same 56-SSOP footprint

📋 بديل مرجعي (غير موجود في الكتالوج)

MSP430F311IDL

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 56-SSOP (BSSOP)
Uses flash memory and a lower P311-family analog-resource count than P313IDL, while retaining the 56-SSOP package, 16-bit core class, and ultra-low-power architecture

📋 بديل مرجعي (غير موجود في الكتالوج)

MSP430P313IDL الحدود القصوى والخصائص الكهربائية

CPU Architecture 16-bit RISC
أقصى تردد للساعة 3 MHz
Program Memory 8 KB OTP (8K x 8 bits)
RAM 256 B
Supply Voltage Range 2.5 V to 5.5 V
Maximum Supply Voltage 5.5 V
Operating Current 400 µA typical at 1 MHz and 3 V
Standby Current 1.3 µA typical
RAM-Retention or Off-Mode Current 0.1 µA typical
Standby Wake-Up Time 6 µs maximum
Power-Saving Modes 5 modes
LCD Driver 92-segment LCD
العلبة 56-pin SSOP (0.295 inch, 7.50 mm body width)
Terminal Count 56 terminals
Terminal Form Gull wing
Package Shape Rectangular
Temperature Grade Industrial
نوع التركيب Surface mount

دليل تكوين أطراف MSP430P313IDL rectangular

تكوين الأطراف لـ MSP430P313IDL (حزمة rectangular). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة rectangular لـ MSP430P313IDL

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MSP430P313IDL.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MSP430P313IDL مناسب لـ 6 التطبيقs: Single-Phase Energy Meter, Portable Environmental Monitor, Industrial Process-Monitoring Panel, Digital Thermometer, Portable Laboratory Data Logger, Compact HMI Controller.

⚡

Single-Phase Energy Meter

The MSP430P313IDL fits a single-phase energy-meter front end because its 92-segment LCD driver can operate the display without a separate controller, while the 16-bit CPU handles measurement control and data processing. Operation from 2.5 V to 5.5 V supports regulated and battery-derived rails. The 400 µA typical current at 1 MHz and 3 V provides a starting point for the active-power budget, while the 1.3 µA standby current and 6 µs maximum wake-up time help preserve energy between measurement intervals. Firmware must also manage LCD contrast, segment update timing, calibration storage, and tamper-detection functions.

🧩

Portable Environmental Monitor

A portable environmental monitor benefits from the MSP430P313IDL's combination of a 16-bit RISC core, 8 KB of OTP memory, and low-power operating modes. The controller can acquire sensor measurements, run threshold logic, and present status on a segmented display while the 1.3 µA standby current limits consumption between samples. RAM-retention or off-mode current is 0.1 µA, allowing the device to preserve selected state when practical. The 256 B RAM should be sized against display buffers and acquisition variables, while OTP firmware must contain all calibration and field-configuration requirements because it is not user-programmable after manufacturing.

🏭

Industrial Process-Monitoring Panel

The MSP430P313IDL is suitable for a compact industrial monitoring panel that presents numeric process information on a segmented LCD. Its 92-segment display capability reduces the number of external driver components, while the integrated analog and timing resources support sensor supervision and periodic updates. The 56-pin SSOP package simplifies routing to a conventional PCB footprint, and the industrial grade designation fits the intended product class. Confirm the complete operating-temperature limits in the manufacturer datasheet before deployment. Design the firmware around display settling, watchdog behavior, fault indication, and communications updates so that a long operating interval does not block safety-related status reporting.

🌡️

Digital Thermometer

A digital thermometer can use the MSP430P313IDL as a compact controller for an analog temperature sensor and segmented display. The 16-bit CPU provides straightforward control for conversion sequencing, calibration, and display updates, while the 92-segment LCD interface can show digits, status symbols, and units directly. At 3 V, the manufacturer's 400 µA typical operating-current value at 1 MHz offers a useful basis for active-state budgeting. For battery operation, the 1.3 µA standby current and 6 µs maximum wake-up time support rapid periodic measurements. Firmware must avoid unnecessary display activation and should compensate for sensor and reference characteristics over the intended temperature span.

📱

Portable Laboratory Data Logger

The MSP430P313IDL can serve as the control and display element of a portable laboratory data logger when the application needs local readout and low standby consumption. Its 8 KB OTP memory holds a compact measurement program, 256 B RAM stores active samples and working variables, and the 92-segment LCD driver presents readings without an external graphics controller. The microcontroller's mixed-signal resources reduce board complexity when the logged quantity is derived from an analog sensor. Engineering trade-offs include finite RAM, one-time-programmable firmware, and limited display resolution. Confirm memory usage, sample buffering, and any external-storage interface during firmware planning rather than assuming that 8 KB is available for application data.

🖥️

Compact HMI Controller

The MSP430P313IDL is appropriate for a compact human-machine interface that uses a segmented LCD rather than a graphic display. Engineers can use the 16-bit CPU for keypad scanning, menu logic, status handling, and control outputs while the LCD interface manages up to 92 segments. The 2.5 V to 5.5 V range supports several common low-voltage supply architectures, and low-power modes reduce consumption when the panel is idle. The design should account for display ghosting, segment visibility across temperature and supply, button debounce, and communication retries. Because RAM is limited to 256 B, keep temporary UI state compact and avoid rendering calculations that require an unnecessarily large buffer.

What is the MSP430P313IDL?
The MSP430P313IDL is a Texas Instruments 16-bit RISC mixed-signal microcontroller optimized for low-power measurement and display applications. It operates at up to 3 MHz, contains 8 KB of OTP memory and 256 B of RAM, and includes a 92-segment LCD driver in a 56-pin SSOP package. According to the manufacturer datasheet, it supports a 2.5 V to 5.5 V supply range, making it appropriate for battery-powered meters, portable instruments, and compact industrial control panels.
What are the key specifications of MSP430P313IDL that engineers should know?
The MSP430P313IDL combines a 16-bit RISC core, 3 MHz maximum clock, 8 KB of OTP memory, 256 B of RAM, and a 92-segment LCD driver. Its typical operating current is 400 µA at 1 MHz and 3 V, while standby current is 1.3 µA and RAM-retention or off-mode current is 0.1 µA. The 56-pin SSOP package and 2.5 V to 5.5 V operating range support compact, low-power embedded designs.
Where can I download the MSP430P313IDL datasheet PDF?
The MSP430P313IDL datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/msp430p313.pdf. Use the manufacturer document for the authoritative pin descriptions, memory map, LCD drive limits, electrical characteristics, timing information, and recommended application circuits. The manufacturer datasheet is also the preferred source when assigning PCB nets because it defines the complete 56-pin package and required operating conditions.
Where can I find the MSP430P313IDL pinout?
The MSP430P313IDL pinout is shown in the pin-description table and package drawing of the Texas Instruments MSP430P313 datasheet. The device uses a 56-pin SSOP package with a 0.295 inch, 7.50 mm body width and gull-wing leads. Assign LCD drive, analog input, supply, reset, clock, and debug connections from that table rather than inferring pin functions from another MSP430 device, because peripheral availability and multiplexing can differ between family members.
How much current does the MSP430P313IDL consume?
The MSP430P313IDL has a typical operating current of 400 µA when running at 1 MHz with a 3 V supply. According to the manufacturer datasheet, standby mode consumes 1.3 µA, RAM-retention or off mode consumes 0.1 µA, and standby wake-up occurs within 6 µs maximum. For a battery-life calculation, include the duration of acquisition, display activation, and peripheral operation rather than applying the 400 µA active figure to the entire operating interval.
Is the MSP430P313IDL suitable for battery-powered instruments?
Yes, the MSP430P313IDL is suitable for battery-powered instruments because it combines a 16-bit processing core with five low-power modes and an integrated 92-segment LCD driver. Standby current is 1.3 µA, RAM-retention or off-mode current is 0.1 µA, and wake-up time is 6 µs maximum. These characteristics support duty-cycled measurement, display, and user-interface systems while reducing the number of external display-controller components.
What can replace the MSP430P313IDL?
No pin-to-pin replacement for the MSP430P313IDL has been established by the available cross-reference results. A valid replacement would need the same 56-pin SSOP footprint, compatible LCD and analog pin assignments, suitable flash or OTP memory, and adequate SRAM. Before replacing it, compare the MSP430P313 datasheet pin table and memory map against the candidate device; matching processor frequency and supply voltage alone is not enough to establish drop-in compatibility.
Is there a cross-brand equivalent for MSP430P313IDL?
No verified cross-brand drop-in equivalent for the MSP430P313IDL was identified. The available cross-reference searches list tools and general replacement guidance but do not name a competitor device with confirmed 56-pin SSOP compatibility. Treat any proposed alternative as a redesign candidate until its pinout, LCD drive capability, memory map, analog peripherals, supply range, and firmware requirements have been verified against the Texas Instruments MSP430P313 datasheet.
When should I choose MSP430P313IDL instead of another MSP430 device?
Choose the MSP430P313IDL when the design needs 8 KB of OTP program memory, 256 B of RAM, a direct 92-segment LCD interface, and operation from 2.5 V to 5.5 V. Its five low-power modes support duty-cycled operation. Select a different MSP430 variant when the board requires more program or data memory, a different LCD segment count, a larger package, or application-specific peripherals. Verify the complete pin assignment and memory requirements before making the choice.
Is MSP430P313IDL suitable for an industrial control panel?
The MSP430P313IDL is suitable for compact industrial control panels that use a segmented LCD, low-voltage operation, and infrequent user interaction. Its integrated 92-segment display interface can remove a separate LCD controller, while the 16-bit CPU and 10-bit ADC resources support basic sensing and control functions. The industrial temperature grade is identified for this device, but the exact minimum and maximum operating temperatures must be confirmed in the manufacturer datasheet before final environmental qualification.
MSP430P313IDL vs another MSP430: which is better for an LCD meter?
The MSP430P313IDL is the better fit when an LCD meter requires 92 directly driven segments, 8 KB of OTP memory, and 256 B of RAM in a 56-pin SSOP. Compare any alternative by LCD segment count, memory capacity, pin multiplexing, package dimensions, and low-power performance rather than clock speed alone. A faster processor does not provide a drop-in replacement if analog inputs, display outputs, supply pins, or programming interfaces are arranged differently.
What is the difference between MSP430P313IDL and a functionally similar MCU?
The defining differences are the MSP430P313IDL's 16-bit RISC architecture, 3 MHz clock, 8 KB OTP memory, 256 B RAM, integrated 92-segment LCD driver, and 56-pin SSOP package. A functionally similar mixed-signal MCU may offer comparable low-power operation but differ in analog accuracy, display resources, memory organization, peripheral mapping, or development ecosystem. A direct PCB substitution requires exact pin-level and firmware compatibility rather than merely similar application suitability.
Where can I buy MSP430P313IDL online?
Use the Request a Quote form on this page to request MSP430P313IDL availability, current pricing, and a delivery quotation for the required quantity and package configuration. The request should specify the exact MPN, quantity, and desired shipping terms. Because pricing and lead time can change with market conditions and order volume, obtain a current quotation for the particular request rather than relying on a stale historical price or an unverified availability statement.
What is the price of MSP430P313IDL?
Current MSP430P313IDL pricing is available through the Request a Quote form on this page. Enter the exact MPN, required quantity, and shipment destination so the quotation reflects the applicable order terms. Price depends on quantity, supply status, and purchasing conditions, and no fixed unit price should be assumed without a current response. This page intentionally avoids presenting a static price that could become inaccurate.
What is the lead time for MSP430P313IDL?
Request the current MSP430P313IDL lead time through the Request a Quote form on this page. Include the required quantity, target shipment date, and delivery location because lead time can vary with order size and supply conditions. A 2,048-piece inventory figure was identified for one source, but that quantity does not establish availability for every order size or guarantee a delivery schedule. Use the quotation response for planning and production commitments.
Is MSP430P313IDL in stock and does it comply with RoHS and REACH?
Request current MSP430P313IDL stock status through the Request a Quote form on this page, providing the required quantity and package details. The device is identified as a Texas Instruments 56-pin SSOP industrial-grade mixed-signal microcontroller. Its RoHS and REACH classifications are not stated in the available manufacturer descriptions, so this page records them as unknown. Obtain the current manufacturer compliance declaration or material declaration before using the status in a formal product approval process.

بيانات مرجعية هندسية لـ MSP430P313IDL — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the MSP430P313IDL for a compact, segmented-LCD design that needs a 16-bit RISC core, 8 KB of OTP firmware memory, 256 B of RAM, and low-power operation from 2.5 V to 5.5 V. It is especially suitable for battery-operated meters, thermometers, environmental monitors, and industrial panels whose display can be driven directly by the MCU. Select another MSP430 variant when greater flash or RAM, a different segment count, or additional package pins are required. Do not treat a functionally similar MCU as interchangeable: the replacement must match the 56-pin SSOP land pattern, LCD and analog multiplexing, supply arrangement, programming interface, and memory organization. Because no verified drop-in substitute was identified, firmware and board changes should be assumed until a candidate has been checked against the manufacturer pin table.

المقارنة مع البدائل

المعامل هذا المنتج
Brand Texas Instruments
Package 56-pin SSOP
CPU Architecture 16-bit RISC
Maximum Clock Frequency 3 MHz
Program Memory 8 KB OTP
RAM 256 B
Supply Voltage Range 2.5 V to 5.5 V
LCD Driver 92-segment LCD
Operating Current 400 µA typical at 1 MHz and 3 V
Standby Current 1.3 µA typical

أبرز الفروقات

  • Integrated display controller reduces external circuitry (مقابلGeneric 16-bit mixed-signal MCU without a confirmed 92-segment LCD driver)
  • Low-power operating profile for duty-cycled measurement (مقابلGeneric continuously active mixed-signal MCU)
  • Compact 16-bit control with 8 KB of OTP memory (مقابلGeneric 8-bit low-power MCU with limited arithmetic throughput)

ملاحظات التصميم

Build the power budget from the duration of each operating state rather than treating the 400 µA active current at 1 MHz and 3 V as continuous consumption. Include sensor acquisition, LCD activation, processor execution, standby, and wake-up intervals in the calculation. The manufacturer lists 1.3 µA standby current and 0.1 µA RAM-retention or off-mode current. Select the LCD drive mode and operating clock only after confirming whether the application can remain in a lower-power state between events.

Route the LCD segment and common-drive connections according to the complete 56-pin pin-description table in the manufacturer datasheet. Place the supply-decoupling component close to the relevant power pin, and keep sensitive analog inputs away from display-drive and switching-node traces. The 56-pin SSOP body is 7.50 mm wide, so the PCB land pattern must match the specified lead span and terminal pitch rather than a generic SSOP footprint.

Do not assume that another MSP430 with a similar clock or memory size is a drop-in replacement. Verify LCD segment assignment, analog-channel multiplexing, supply pins, clock connections, programming interface, and memory organization. For the MSP430P313IDL, the 92-segment LCD driver and 56-terminal footprint are especially important constraints. Also account for 256 B of RAM and one-time-programmable firmware during architecture planning; a redesign may be necessary if the application expects field updates or extensive buffering.

Use the manufacturer electrical characteristics to confirm the operating-current and temperature limits at the selected clock and supply voltage. The available product information identifies an industrial temperature grade but does not state the numerical limits. Validate the worst-case enclosure temperature, LCD activity, and power-supply tolerance rather than deriving environmental suitability from the grade label alone. Keep thermal analysis focused on internal dissipation and, if necessary, provide copper area around the SSOP without changing the manufacturer-recommended land pattern.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The available manufacturer and distributor descriptions identify an industrial-grade Texas Instruments microcontroller but do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to the identified industrial-grade ordering information.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MSP430P313IDL MSP430P313IDL datasheet MSP430P313IDL pinout MSP430P313IDL datasheet pdf MSP430P313IDL specifications MSP430P313IDL equivalent MSP430P313IDL replacement MSP430P313IDL price MSP430P313IDL stock Texas Instruments MSP430P313IDL MSP430P313IDL 56-SSOP MSP430P313IDL LCD meter MSP430P313IDL 92 segment LCD MSP430P313IDL low power

المكونات والمصطلحات ذات الصلة

Texas Instruments MSP430P313IDL MSP430 mixed-signal microcontroller embedded microcontroller 16-bit RISC architecture microcontroller semiconductor 3 MHz clock 8 KB OTP memory 256 B RAM 92-segment LCD driver 56-pin SSOP SSOP package family surface-mount package 2.5 V to 5.5 V supply 400 µA operating current 1.3 µA standby current 0.1 µA off-mode current 6 µs wake-up time low-power embedded control single-phase energy meter industrial process monitoring portable environmental monitor segmented LCD display
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر