MSP430P313IDL - 16-Bit 3MHz Low-Power MCU | Texas Instruments
部品番号: MSP430P313IDL ✓ 生産中MSP430P313IDL 概要
A mixed-signal microcontroller combines a low-power digital processing core with analog and peripheral functions on one integrated device. The MSP430 family belongs to the embedded microcontroller hierarchy and uses a 16-bit RISC architecture optimized for autonomous, power-constrained control. Rather than driving a separate display controller, the MSP430P313IDL includes a segmented LCD interface capable of directly supporting a 92-segment display.
Key features include an 8 KB OTP program memory organized as 8K x 8 bits, 256 B of RAM, and operation up to 3 MHz. Typical operating current is 400 µA at 1 MHz and 3 V. Five low-power operating modes support battery-operated designs, with standby current of 1.3 µA and RAM-retention or off-mode current of 0.1 µA. Standby wake-up time is 6 µs, allowing the controller to respond quickly after a user or measurement event.
The device combines a 16-bit CPU with 10-bit ADC, timer, communication, and LCD-segment resources intended for mixed-signal measurement systems. Its one-time-programmable memory is suitable for production firmware that does not require field reprogramming. The 56-pin SSOP package provides a conventional surface-mount gull-wing footprint and supports integration into compact metering and control boards.
Typical applications include single-phase energy meters, industrial process-monitoring panels, portable environmental instruments, laboratory data loggers, digital thermometers, and compact HMI controllers. In each case, the internal LCD driver reduces the number of external components, while the low-power modes preserve battery life between measurement or user-interface events.
Power budgeting and startup behavior deserve attention in battery designs. Calculate average current from active acquisition time, standby time, and display load rather than using the 400 µA operating-current figure alone. Place the decoupling capacitor close to the supply pins and follow the manufacturer datasheet for LCD segment drive, external crystal, and unused-pin requirements.
This product record combines the manufacturer-device characteristics with package, memory, LCD, power-mode, and low-power application details. It also distinguishes documented functions from parameters that still require confirmation from the complete MSP430P313 datasheet and the pin-description table.
ドロップイン代替品: MSP430P313IDL — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
MSP430F313IDL
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430P312IDL
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430P311IDL
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F312IDL
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F311IDL
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430P313IDL 最大定格&電気的特性
| CPU Architecture | 16-bit RISC |
| 最大クロック周波数 | 3 MHz |
| Program Memory | 8 KB OTP (8K x 8 bits) |
| RAM | 256 B |
| Supply Voltage Range | 2.5 V to 5.5 V |
| Maximum Supply Voltage | 5.5 V |
| Operating Current | 400 µA typical at 1 MHz and 3 V |
| Standby Current | 1.3 µA typical |
| RAM-Retention or Off-Mode Current | 0.1 µA typical |
| Standby Wake-Up Time | 6 µs maximum |
| Power-Saving Modes | 5 modes |
| LCD Driver | 92-segment LCD |
| パッケージ | 56-pin SSOP (0.295 inch, 7.50 mm body width) |
| Terminal Count | 56 terminals |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Industrial |
| 実装タイプ | Surface mount |
MSP430P313IDL rectangular ピン配置ガイド
MSP430P313IDL (rectangular パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430P313IDL.
詳細は データシート をご参照ください。
主な用途
MSP430P313IDL の用途: 6 件s: Single-Phase Energy Meter, Portable Environmental Monitor, Industrial Process-Monitoring Panel, Digital Thermometer, Portable Laboratory Data Logger, Compact HMI Controller.
Single-Phase Energy Meter
The MSP430P313IDL fits a single-phase energy-meter front end because its 92-segment LCD driver can operate the display without a separate controller, while the 16-bit CPU handles measurement control and data processing. Operation from 2.5 V to 5.5 V supports regulated and battery-derived rails. The 400 µA typical current at 1 MHz and 3 V provides a starting point for the active-power budget, while the 1.3 µA standby current and 6 µs maximum wake-up time help preserve energy between measurement intervals. Firmware must also manage LCD contrast, segment update timing, calibration storage, and tamper-detection functions.
Portable Environmental Monitor
A portable environmental monitor benefits from the MSP430P313IDL's combination of a 16-bit RISC core, 8 KB of OTP memory, and low-power operating modes. The controller can acquire sensor measurements, run threshold logic, and present status on a segmented display while the 1.3 µA standby current limits consumption between samples. RAM-retention or off-mode current is 0.1 µA, allowing the device to preserve selected state when practical. The 256 B RAM should be sized against display buffers and acquisition variables, while OTP firmware must contain all calibration and field-configuration requirements because it is not user-programmable after manufacturing.
Industrial Process-Monitoring Panel
The MSP430P313IDL is suitable for a compact industrial monitoring panel that presents numeric process information on a segmented LCD. Its 92-segment display capability reduces the number of external driver components, while the integrated analog and timing resources support sensor supervision and periodic updates. The 56-pin SSOP package simplifies routing to a conventional PCB footprint, and the industrial grade designation fits the intended product class. Confirm the complete operating-temperature limits in the manufacturer datasheet before deployment. Design the firmware around display settling, watchdog behavior, fault indication, and communications updates so that a long operating interval does not block safety-related status reporting.
Digital Thermometer
A digital thermometer can use the MSP430P313IDL as a compact controller for an analog temperature sensor and segmented display. The 16-bit CPU provides straightforward control for conversion sequencing, calibration, and display updates, while the 92-segment LCD interface can show digits, status symbols, and units directly. At 3 V, the manufacturer's 400 µA typical operating-current value at 1 MHz offers a useful basis for active-state budgeting. For battery operation, the 1.3 µA standby current and 6 µs maximum wake-up time support rapid periodic measurements. Firmware must avoid unnecessary display activation and should compensate for sensor and reference characteristics over the intended temperature span.
Portable Laboratory Data Logger
The MSP430P313IDL can serve as the control and display element of a portable laboratory data logger when the application needs local readout and low standby consumption. Its 8 KB OTP memory holds a compact measurement program, 256 B RAM stores active samples and working variables, and the 92-segment LCD driver presents readings without an external graphics controller. The microcontroller's mixed-signal resources reduce board complexity when the logged quantity is derived from an analog sensor. Engineering trade-offs include finite RAM, one-time-programmable firmware, and limited display resolution. Confirm memory usage, sample buffering, and any external-storage interface during firmware planning rather than assuming that 8 KB is available for application data.
Compact HMI Controller
The MSP430P313IDL is appropriate for a compact human-machine interface that uses a segmented LCD rather than a graphic display. Engineers can use the 16-bit CPU for keypad scanning, menu logic, status handling, and control outputs while the LCD interface manages up to 92 segments. The 2.5 V to 5.5 V range supports several common low-voltage supply architectures, and low-power modes reduce consumption when the panel is idle. The design should account for display ghosting, segment visibility across temperature and supply, button debounce, and communication retries. Because RAM is limited to 256 B, keep temporary UI state compact and avoid rendering calculations that require an unnecessarily large buffer.
エンジニアリング参考データ: MSP430P313IDL — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Texas Instruments |
| Package | 56-pin SSOP |
| CPU Architecture | 16-bit RISC |
| Maximum Clock Frequency | 3 MHz |
| Program Memory | 8 KB OTP |
| RAM | 256 B |
| Supply Voltage Range | 2.5 V to 5.5 V |
| LCD Driver | 92-segment LCD |
| Operating Current | 400 µA typical at 1 MHz and 3 V |
| Standby Current | 1.3 µA typical |
主な差別化要因
- Integrated display controller reduces external circuitry (vs Generic 16-bit mixed-signal MCU without a confirmed 92-segment LCD driver)
- Low-power operating profile for duty-cycled measurement (vs Generic continuously active mixed-signal MCU)
- Compact 16-bit control with 8 KB of OTP memory (vs Generic 8-bit low-power MCU with limited arithmetic throughput)
設計ノート
Build the power budget from the duration of each operating state rather than treating the 400 µA active current at 1 MHz and 3 V as continuous consumption. Include sensor acquisition, LCD activation, processor execution, standby, and wake-up intervals in the calculation. The manufacturer lists 1.3 µA standby current and 0.1 µA RAM-retention or off-mode current. Select the LCD drive mode and operating clock only after confirming whether the application can remain in a lower-power state between events.
Route the LCD segment and common-drive connections according to the complete 56-pin pin-description table in the manufacturer datasheet. Place the supply-decoupling component close to the relevant power pin, and keep sensitive analog inputs away from display-drive and switching-node traces. The 56-pin SSOP body is 7.50 mm wide, so the PCB land pattern must match the specified lead span and terminal pitch rather than a generic SSOP footprint.
Do not assume that another MSP430 with a similar clock or memory size is a drop-in replacement. Verify LCD segment assignment, analog-channel multiplexing, supply pins, clock connections, programming interface, and memory organization. For the MSP430P313IDL, the 92-segment LCD driver and 56-terminal footprint are especially important constraints. Also account for 256 B of RAM and one-time-programmable firmware during architecture planning; a redesign may be necessary if the application expects field updates or extensive buffering.
Use the manufacturer electrical characteristics to confirm the operating-current and temperature limits at the selected clock and supply voltage. The available product information identifies an industrial temperature grade but does not state the numerical limits. Validate the worst-case enclosure temperature, LCD activity, and power-supply tolerance rather than deriving environmental suitability from the grade label alone. Keep thermal analysis focused on internal dissipation and, if necessary, provide copper area around the SSOP without changing the manufacturer-recommended land pattern.
コンプライアンス情報
The available manufacturer and distributor descriptions identify an industrial-grade Texas Instruments microcontroller but do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to the identified industrial-grade ordering information.