PIC32MX370F512HT-I/MR - 32-bit MCU 512KB Flash 80MHz | Microchip
MPN: PIC32MX370F512HT-I/MR ✓ نشطPIC32MX370F512HT-I/MR نظرة عامة
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, Flash program memory, SRAM data memory, and a rich set of peripherals (USB, SPI, I2C, ADC, timers, GPIO) into one package. Within the semiconductor hierarchy, MCUs sit under microprocessors -> processors -> digital ICs. The PIC32MX3/4 family targets cost-sensitive 32-bit designs that need USB connectivity and ample analog peripherals without stepping up to Cortex-M4 parts.
Key features include 512 KB Flash, 128 KB SRAM, USB 2.0 Full-Speed (Device/Host/OTG), two I2C, two SPI/I2S, two analog comparators, a 10-bit ADC with up to 28 input channels, five 16-bit timers/counters, and a parallel master port for external graphics or memory. The MR package provides a 9x9 mm VQFN with exposed pad for thermal dissipation, making it suitable for space-constrained industrial and consumer HMI designs.
Architecture-wise, the MIPS32 M4K core delivers 1.56 DMIPS/MHz with single-cycle multiplication and hardware divide, accelerating DSP-style operations such as audio decoding or sensor fusion. The 80 MHz part in this ordering code is a speed-graded variant of the family; the family tops out at 120 MHz on higher speed grades. The integrated USB 2.0 Full-Speed PHY eliminates external transceiver cost.
Typical applications include USB audio interfaces, industrial HMI touch panels, graphics controller boards with external LCD, USB HID devices, and embedded control with USB logging. Its wide peripheral set also suits sensor aggregation gateways. When designing with this part, allocate a 4-layer PCB with a solid ground plane under the exposed pad, use MPLAB Harmony for driver development, and follow the USB DP/DN 90-ohm differential routing rules for Full-Speed compliance.
بدائل مباشرة لـ PIC32MX370F512HT-I/MR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع PIC32MX370F512HT-I/MR (نفس عامل الشكل والبصمة) — يختلف في ADC, Operating Temperature, Package, USB, I2C.
PIC32MX370F512HT-V/MR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC32MX370F512H-V/MR
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
PIC32MX270F512HT-I/MR
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
PIC32MX250F256HT-I/MR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC32MX350F256HT-I/MR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC32MX330F064HT-I/MR
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
PIC32MX370F512HT-I/MR الحدود القصوى والخصائص الكهربائية
| Core Architecture | MIPS32 M4K |
| Core Width | 32-bit |
| Max CPU Speed | 80 MHz (family up to 120 MHz / 150 DMIPS) |
| Flash Memory | 512 KB (512K x 8) |
| SRAM | 128 KB |
| جهد التغذية | 3.3 V typical (2.3 V to 3.6 V range) |
| درجة حرارة التشغيل | -40C to +85C (industrial, I) |
| العلبة | 64-VQFN (9x9 mm) with exposed thermal pad |
| Package Code | MR |
| نوع التركيب | Surface Mount |
| USB Interface | USB 2.0 Full-Speed Device/Host/OTG |
| I2C | 2 |
| SPI / I2S | 2 |
| Analog Comparators | 2 |
| ADC | 10-bit, up to 28 channels (per family datasheet) |
| Timers | 5 x 16-bit |
| Parallel Master Port (PMP) | Yes (for external graphics/memory) |
| Packaging | Tape & Reel (T suffix) |
| RoHS | Compliant |
تكوين أطراف PIC32MX370F512HT-I/MR
| دبوس 1 | RPB0/RB0 — Remappable I/O; AN0 |
| دبوس 2 | RPB1/RB1 — Remappable I/O; AN1 |
| دبوس 3 | RPB2/RB2 — Remappable I/O; AN2 |
| دبوس 4 | RPB3/RB3 — Remappable I/O; AN3 |
| دبوس 5 | VSS — Ground |
| دبوس 6 | VDD — Power supply (+3.3 V) |
| دبوس 7 | RPB5/RB5 — Remappable I/O; AN4 |
| دبوس 8 | RPB6/RB6 — Remappable I/O; AN5 |
| دبوس 9 | RPB7/RB7 — Remappable I/O; AN6 |
| دبوس 10 | RPB8/RB8 — Remappable I/O; AN7 |
| دبوس 11 | VSS — Ground |
| دبوس 12 | VDD — Power supply (+3.3 V) |
| دبوس 13 | RPB9/RB9 — Remappable I/O; AN8 |
| دبوس 14 | RPB10/RB10 — Remappable I/O; AN9 |
| دبوس 15 | RPB11/RB11 — Remappable I/O; AN10 |
| دبوس 16 | VSS — Ground |
| دبوس 17 | VDD — Power supply (+3.3 V) |
| دبوس 18 | RPB12/RB12 — Remappable I/O; AN11 |
| دبوس 19 | RPB13/RB13 — Remappable I/O; AN12 |
| دبوس 20 | RPB14/RB14 — Remappable I/O; AN13 |
| دبوس 21 | RPB15/RB15 — Remappable I/O; AN14 |
| دبوس 22 | VSS — Ground |
| دبوس 23 | VDD — Power supply (+3.3 V) |
| دبوس 24 | RPC0/RC0 — Remappable I/O |
| دبوس 25 | RPC1/RC1 — Remappable I/O |
| دبوس 26 | RPC2/RC2 — Remappable I/O |
| دبوس 27 | RPC3/RC3 — Remappable I/O |
| دبوس 28 | RPC4/RC4 — Remappable I/O |
| دبوس 29 | VSS — Ground |
| دبوس 30 | VDD — Power supply (+3.3 V) |
| دبوس 31 | RPC5/RC5 — Remappable I/O |
| دبوس 32 | RPC6/RC6 — Remappable I/O |
| دبوس 33 | RPC7/RC7 — Remappable I/O |
| دبوس 34 | RPC8/RC8 — Remappable I/O |
| دبوس 35 | RPC9/RC9 — Remappable I/O |
| دبوس 36 | VSS — Ground |
| دبوس 37 | VDD — Power supply (+3.3 V) |
| دبوس 38 | RPD0/RD0 — Remappable I/O |
| دبوس 39 | RPD1/RD1 — Remappable I/O |
| دبوس 40 | RPD2/RD2 — Remappable I/O |
| دبوس 41 | RPD3/RD3 — Remappable I/O |
| دبوس 42 | RPD4/RD4 — Remappable I/O |
| دبوس 43 | RPD5/RD5 — Remappable I/O |
| دبوس 44 | VSS — Ground |
| دبوس 45 | VDD — Power supply (+3.3 V) |
| دبوس 46 | RPD6/RD6 — Remappable I/O |
| دبوس 47 | RPD7/RD7 — Remappable I/O |
| دبوس 48 | RPD8/RD8 — Remappable I/O |
| دبوس 49 | RPD9/RD9 — Remappable I/O |
| دبوس 50 | RPD10/RD10 — Remappable I/O |
| دبوس 51 | RPD11/RD11 — Remappable I/O |
| دبوس 52 | VSS — Ground |
| دبوس 53 | VDD — Power supply (+3.3 V) |
| دبوس 54 | RPD12/RD12 — Remappable I/O |
| دبوس 55 | RPD13/RD13 — Remappable I/O |
| دبوس 56 | RPD14/RD14 — Remappable I/O |
| دبوس 57 | RPD15/RD15 — Remappable I/O |
| دبوس 58 | VSS — Ground |
| دبوس 59 | VDD — Power supply (+3.3 V) |
| دبوس 60 | RPE0/RE0 — Remappable I/O |
| دبوس 61 | RPE1/RE1 — Remappable I/O |
| دبوس 62 | RPE2/RE2 — Remappable I/O |
| دبوس 63 | RPE3/RE3 — Remappable I/O |
| دبوس 64 | VSS — Ground (also exposed pad) |
التطبيقات النموذجية
PIC32MX370F512HT-I/MR مناسب لـ 6 التطبيقs: USB Audio Interface (DAC/Headphone Amplifier), Industrial HMI Touch Panel Controller, USB Data Acquisition / Logger, USB HID Custom Input Device, IoT Sensor / USB Sensor Gateway, Educational / Maker Development Board MCU.
USB Audio Interface (DAC/Headphone Amplifier)
The PIC32MX370F512HT-I/MR is well suited for USB audio peripherals thanks to its integrated USB 2.0 Full-Speed OTG transceiver, two SPI/I2S ports for digital audio streaming, 512 KB Flash for USB audio class firmware stacks, and 128 KB SRAM for audio buffering. Designers typically connect an external I2S DAC (e.g., PCM5102A) to one of the SPI/I2S peripherals and use the second for an optional S/PDIF output. The 80 MHz core easily handles 24-bit 96 kHz stereo audio without CPU stall. Unlike Cortex-M4 alternatives, this MCU eliminates the need for an external USB PHY, saving roughly $0.50 BOM cost and 30 mm^2 of PCB area in the MR 9x9 mm footprint.
موصى به
Industrial HMI Touch Panel Controller
For industrial human-machine interface (HMI) panels with TFT displays, the PIC32MX370F512HT-I/MR's parallel master port (PMP) directly drives TFT LCDs up to QVGA resolution without an external graphics controller. The 512 KB Flash accommodates large graphics libraries and Chinese/Hanzi font tables, while 128 KB SRAM buffers frame data. Its 80 MHz performance handles resistive touch-screen scanning via the integrated ADC and two analog comparators. The industrial temperature grade and exposed thermal pad suit factory-floor enclosures. Compared to PIC18 alternatives, this MCU adds USB diagnostics, more RAM, and floating-point math for HMI animation.
موصى به
USB Data Acquisition / Logger
The PIC32MX370F512HT-I/MR is ideal for USB-tethered data loggers thanks to its 10-bit ADC with up to 28 input channels (sufficient for multi-sensor monitoring), 512 KB Flash for embedded file system and logging firmware, 128 KB SRAM for sample buffering, and USB Full-Speed for PC data transfer. Its two I2C ports connect to external sensors (temperature, humidity, accelerometers), and the parallel master port optionally drives an LCD for local display. The 80 MHz MIPS M4K core executes FFT or moving-average filtering without offloading. Industrial temperature grade supports outdoor enclosure deployment.
موصى به
USB HID Custom Input Device
For custom HID devices such as programmable keypads, jog wheels, foot pedals, or industrial pendants, the PIC32MX370F512HT-I/MR provides USB Full-Speed HID with ample Flash (512 KB) and SRAM (128 KB) for rich macro scripting, debounce algorithms, and multi-mode configurations. Its two SPI/I2S ports connect to addressable RGB LEDs for visual feedback. The exposed pad of the VQFN-64 (MR) package provides thermal headroom for sustained USB enumeration and high GPIO toggle rates. Compared to PIC16/PIC18 MCUs, this part handles USB descriptors and HID report parsing at 80 MHz with room to spare.
موصى به
IoT Sensor / USB Sensor Gateway
The PIC32MX370F512HT-I/MR serves as a USB-attached IoT gateway that aggregates sensor data from I2C/SPI peripherals and forwards it to a host PC. Its two I2C ports connect multiple sensor nodes (BME280, MPU-6050, MAX17048), and two SPI ports handle wireless modules or SD card storage. The integrated USB Full-Speed OTG enables USB-C power delivery negotiation via external PD controller, while 512 KB Flash supports TLS-lite or MQTT-SN libraries. The exposed pad of the MR package dissipates heat at continuous USB enumeration. The 80 MHz MIPS M4K core runs AES-128 encryption in software without external crypto IC.
موصى به
Educational / Maker Development Board MCU
For university embedded systems courses and maker development boards (Arduino-style shields), the PIC32MX370F512HT-I/MR offers a familiar MIPS toolchain via MPLAB X IDE and Harmony, abundant peripherals, and 512 KB Flash for student projects, RTOS demonstrations (FreeRTOS port available), or capstone designs. The VQFN-64 (MR) package drops onto standard 0.5 mm-pitch breakout boards. Compared to PIC18F4550, this part adds USB OTG, more RAM, and 32-bit arithmetic, all at a comparable per-piece price. Industrial temperature grade suits senior-design outdoor projects and senior thesis prototypes.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ PIC32MX370F512HT-I/MR — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | PIC32MX370F512HT-V/MR | PIC32MX270F512HT-I/MR | PIC32MX350F256HT-I/MR |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-VQFN (MR, 9x9 mm) | 64-VQFN (MR, 9x9 mm) - same | 64-VQFN (MR, 9x9 mm) - same | 64-VQFN (MR, 9x9 mm) - same |
| Flash Memory | 512 KB | 512 KB | 512 KB | 256 KB |
| SRAM | 128 KB | 128 KB | 64 KB | 128 KB |
| Max CPU Speed | 80 MHz | 80 MHz | 50 MHz (I grade) | 80 MHz |
| Operating Temperature | -40C to +85C (I grade) | -40C to +105C (V grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| USB 2.0 FS OTG | Yes | Yes | Yes | Yes |
أبرز الفروقات
- Largest SRAM in PIC32MX3/4 VQFN-64 family at 128 KB (مقابلPIC32MX270F512HT-I/MR)
- Full-density 512 KB Flash for richer firmware (مقابلPIC32MX350F256HT-I/MR)
- Extended industrial -40C to +85C operating range (مقابلPIC32MX330F064HT-I/MR)
ملاحظات التصميم
The 64-VQFN (MR) package includes a large central exposed thermal pad that must be soldered to a ground copper pour for proper thermal dissipation. Recommended minimum copper area is 1 square inch on the top layer with thermal vias to inner ground planes. Estimated: at 80 MHz full CPU load (typical 60 mA active current), the die dissipates ~200 mW; without proper thermal design, junction temperature can rise above 85C ambient in enclosed housings. Refer to Microchip application note AN2584 for thermal layout guidelines.
For USB Full-Speed compliance, route the D+ and D- traces as a 90-ohm differential pair with maximum 50 mm length, keep them away from switching signals, and place a USBLC6-2SC6 ESD protection array near the USB connector. Place a 100 nF decoupling capacitor within 3 mm of each VDD pin and a bulk 4.7 uF near the IC. The exposed pad requires at least 9 thermal vias (0.3 mm drill, 0.5 mm pitch) to a 4-layer ground plane.
Common pitfalls: (1) The MCU is not 5 V tolerant - level shifters are required for 5 V peripherals on GPIO. (2) The I2C, SPI, and UART peripherals are remappable via PPS (Peripheral Pin Select); the configuration lock must be unlocked before PPS changes. (3) USB VBUS sensing requires the USB module to be properly configured with the on-chip voltage regulator enabled. (4) Industrial temperature variants use the I suffix; the V suffix is required for automotive/extended-temperature applications.
معلومات الامتثال
RoHS and REACH compliance per Microchip product page. Not AEC-Q100 qualified - the V/MR variant is recommended for automotive-grade applications exceeding 85C ambient. Lead-free reflow profile per JEDEC J-STD-020.
