PIC32MX370F512HT-I/MR - 32-bit MCU 512KB Flash 80MHz | Microchip
MPN: PIC32MX370F512HT-I/MR ✓ Hoạt độngPIC32MX370F512HT-I/MR Tóm tắt
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, Flash program memory, SRAM data memory, and a rich set of peripherals (USB, SPI, I2C, ADC, timers, GPIO) into one package. Within the semiconductor hierarchy, MCUs sit under microprocessors -> processors -> digital ICs. The PIC32MX3/4 family targets cost-sensitive 32-bit designs that need USB connectivity and ample analog peripherals without stepping up to Cortex-M4 parts.
Key features include 512 KB Flash, 128 KB SRAM, USB 2.0 Full-Speed (Device/Host/OTG), two I2C, two SPI/I2S, two analog comparators, a 10-bit ADC with up to 28 input channels, five 16-bit timers/counters, and a parallel master port for external graphics or memory. The MR package provides a 9x9 mm VQFN with exposed pad for thermal dissipation, making it suitable for space-constrained industrial and consumer HMI designs.
Architecture-wise, the MIPS32 M4K core delivers 1.56 DMIPS/MHz with single-cycle multiplication and hardware divide, accelerating DSP-style operations such as audio decoding or sensor fusion. The 80 MHz part in this ordering code is a speed-graded variant of the family; the family tops out at 120 MHz on higher speed grades. The integrated USB 2.0 Full-Speed PHY eliminates external transceiver cost.
Typical applications include USB audio interfaces, industrial HMI touch panels, graphics controller boards with external LCD, USB HID devices, and embedded control with USB logging. Its wide peripheral set also suits sensor aggregation gateways. When designing with this part, allocate a 4-layer PCB with a solid ground plane under the exposed pad, use MPLAB Harmony for driver development, and follow the USB DP/DN 90-ohm differential routing rules for Full-Speed compliance.
Bộ thay thế dễ dàng lắp đặt cho PIC32MX370F512HT-I/MR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC32MX370F512HT-I/MR (cùng hình factor và footprint) — khác nhau ở ADC, Operating Temperature, Package, USB, I2C.
PIC32MX370F512HT-V/MR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MX370F512H-V/MR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MX270F512HT-I/MR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MX250F256HT-I/MR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MX350F256HT-I/MR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC32MX330F064HT-I/MR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC32MX370F512HT-I/MR Tỷ lệ tối đa & tính chất điện
| Core Architecture | MIPS32 M4K |
| Core Width | 32-bit |
| Max CPU Speed | 80 MHz (family up to 120 MHz / 150 DMIPS) |
| Flash Memory | 512 KB (512K x 8) |
| SRAM | 128 KB |
| Điện áp cung cấp | 3.3 V typical (2.3 V to 3.6 V range) |
| Nhiệt độ hoạt động | -40C to +85C (industrial, I) |
| Hộp | 64-VQFN (9x9 mm) with exposed thermal pad |
| Package Code | MR |
| Kiểu lắp đặt | Surface Mount |
| USB Interface | USB 2.0 Full-Speed Device/Host/OTG |
| I2C | 2 |
| SPI / I2S | 2 |
| Analog Comparators | 2 |
| ADC | 10-bit, up to 28 channels (per family datasheet) |
| Timers | 5 x 16-bit |
| Parallel Master Port (PMP) | Yes (for external graphics/memory) |
| Packaging | Tape & Reel (T suffix) |
| RoHS | Compliant |
Cấu hình chân PIC32MX370F512HT-I/MR
| Chân 1 | RPB0/RB0 — Remappable I/O; AN0 |
| Chân 2 | RPB1/RB1 — Remappable I/O; AN1 |
| Chân 3 | RPB2/RB2 — Remappable I/O; AN2 |
| Chân 4 | RPB3/RB3 — Remappable I/O; AN3 |
| Chân 5 | VSS — Ground |
| Chân 6 | VDD — Power supply (+3.3 V) |
| Chân 7 | RPB5/RB5 — Remappable I/O; AN4 |
| Chân 8 | RPB6/RB6 — Remappable I/O; AN5 |
| Chân 9 | RPB7/RB7 — Remappable I/O; AN6 |
| Chân 10 | RPB8/RB8 — Remappable I/O; AN7 |
| Chân 11 | VSS — Ground |
| Chân 12 | VDD — Power supply (+3.3 V) |
| Chân 13 | RPB9/RB9 — Remappable I/O; AN8 |
| Chân 14 | RPB10/RB10 — Remappable I/O; AN9 |
| Chân 15 | RPB11/RB11 — Remappable I/O; AN10 |
| Chân 16 | VSS — Ground |
| Chân 17 | VDD — Power supply (+3.3 V) |
| Chân 18 | RPB12/RB12 — Remappable I/O; AN11 |
| Chân 19 | RPB13/RB13 — Remappable I/O; AN12 |
| Chân 20 | RPB14/RB14 — Remappable I/O; AN13 |
| Chân 21 | RPB15/RB15 — Remappable I/O; AN14 |
| Chân 22 | VSS — Ground |
| Chân 23 | VDD — Power supply (+3.3 V) |
| Chân 24 | RPC0/RC0 — Remappable I/O |
| Chân 25 | RPC1/RC1 — Remappable I/O |
| Chân 26 | RPC2/RC2 — Remappable I/O |
| Chân 27 | RPC3/RC3 — Remappable I/O |
| Chân 28 | RPC4/RC4 — Remappable I/O |
| Chân 29 | VSS — Ground |
| Chân 30 | VDD — Power supply (+3.3 V) |
| Chân 31 | RPC5/RC5 — Remappable I/O |
| Chân 32 | RPC6/RC6 — Remappable I/O |
| Chân 33 | RPC7/RC7 — Remappable I/O |
| Chân 34 | RPC8/RC8 — Remappable I/O |
| Chân 35 | RPC9/RC9 — Remappable I/O |
| Chân 36 | VSS — Ground |
| Chân 37 | VDD — Power supply (+3.3 V) |
| Chân 38 | RPD0/RD0 — Remappable I/O |
| Chân 39 | RPD1/RD1 — Remappable I/O |
| Chân 40 | RPD2/RD2 — Remappable I/O |
| Chân 41 | RPD3/RD3 — Remappable I/O |
| Chân 42 | RPD4/RD4 — Remappable I/O |
| Chân 43 | RPD5/RD5 — Remappable I/O |
| Chân 44 | VSS — Ground |
| Chân 45 | VDD — Power supply (+3.3 V) |
| Chân 46 | RPD6/RD6 — Remappable I/O |
| Chân 47 | RPD7/RD7 — Remappable I/O |
| Chân 48 | RPD8/RD8 — Remappable I/O |
| Chân 49 | RPD9/RD9 — Remappable I/O |
| Chân 50 | RPD10/RD10 — Remappable I/O |
| Chân 51 | RPD11/RD11 — Remappable I/O |
| Chân 52 | VSS — Ground |
| Chân 53 | VDD — Power supply (+3.3 V) |
| Chân 54 | RPD12/RD12 — Remappable I/O |
| Chân 55 | RPD13/RD13 — Remappable I/O |
| Chân 56 | RPD14/RD14 — Remappable I/O |
| Chân 57 | RPD15/RD15 — Remappable I/O |
| Chân 58 | VSS — Ground |
| Chân 59 | VDD — Power supply (+3.3 V) |
| Chân 60 | RPE0/RE0 — Remappable I/O |
| Chân 61 | RPE1/RE1 — Remappable I/O |
| Chân 62 | RPE2/RE2 — Remappable I/O |
| Chân 63 | RPE3/RE3 — Remappable I/O |
| Chân 64 | VSS — Ground (also exposed pad) |
Ứng dụng tiêu biểu
PIC32MX370F512HT-I/MR phù hợp cho 6 Áp dụngs: USB Audio Interface (DAC/Headphone Amplifier), Industrial HMI Touch Panel Controller, USB Data Acquisition / Logger, USB HID Custom Input Device, IoT Sensor / USB Sensor Gateway, Educational / Maker Development Board MCU.
USB Audio Interface (DAC/Headphone Amplifier)
The PIC32MX370F512HT-I/MR is well suited for USB audio peripherals thanks to its integrated USB 2.0 Full-Speed OTG transceiver, two SPI/I2S ports for digital audio streaming, 512 KB Flash for USB audio class firmware stacks, and 128 KB SRAM for audio buffering. Designers typically connect an external I2S DAC (e.g., PCM5102A) to one of the SPI/I2S peripherals and use the second for an optional S/PDIF output. The 80 MHz core easily handles 24-bit 96 kHz stereo audio without CPU stall. Unlike Cortex-M4 alternatives, this MCU eliminates the need for an external USB PHY, saving roughly $0.50 BOM cost and 30 mm^2 of PCB area in the MR 9x9 mm footprint.
Được đề xuất
Industrial HMI Touch Panel Controller
For industrial human-machine interface (HMI) panels with TFT displays, the PIC32MX370F512HT-I/MR's parallel master port (PMP) directly drives TFT LCDs up to QVGA resolution without an external graphics controller. The 512 KB Flash accommodates large graphics libraries and Chinese/Hanzi font tables, while 128 KB SRAM buffers frame data. Its 80 MHz performance handles resistive touch-screen scanning via the integrated ADC and two analog comparators. The industrial temperature grade and exposed thermal pad suit factory-floor enclosures. Compared to PIC18 alternatives, this MCU adds USB diagnostics, more RAM, and floating-point math for HMI animation.
Được đề xuất
USB Data Acquisition / Logger
The PIC32MX370F512HT-I/MR is ideal for USB-tethered data loggers thanks to its 10-bit ADC with up to 28 input channels (sufficient for multi-sensor monitoring), 512 KB Flash for embedded file system and logging firmware, 128 KB SRAM for sample buffering, and USB Full-Speed for PC data transfer. Its two I2C ports connect to external sensors (temperature, humidity, accelerometers), and the parallel master port optionally drives an LCD for local display. The 80 MHz MIPS M4K core executes FFT or moving-average filtering without offloading. Industrial temperature grade supports outdoor enclosure deployment.
Được đề xuất
USB HID Custom Input Device
For custom HID devices such as programmable keypads, jog wheels, foot pedals, or industrial pendants, the PIC32MX370F512HT-I/MR provides USB Full-Speed HID with ample Flash (512 KB) and SRAM (128 KB) for rich macro scripting, debounce algorithms, and multi-mode configurations. Its two SPI/I2S ports connect to addressable RGB LEDs for visual feedback. The exposed pad of the VQFN-64 (MR) package provides thermal headroom for sustained USB enumeration and high GPIO toggle rates. Compared to PIC16/PIC18 MCUs, this part handles USB descriptors and HID report parsing at 80 MHz with room to spare.
Được đề xuất
IoT Sensor / USB Sensor Gateway
The PIC32MX370F512HT-I/MR serves as a USB-attached IoT gateway that aggregates sensor data from I2C/SPI peripherals and forwards it to a host PC. Its two I2C ports connect multiple sensor nodes (BME280, MPU-6050, MAX17048), and two SPI ports handle wireless modules or SD card storage. The integrated USB Full-Speed OTG enables USB-C power delivery negotiation via external PD controller, while 512 KB Flash supports TLS-lite or MQTT-SN libraries. The exposed pad of the MR package dissipates heat at continuous USB enumeration. The 80 MHz MIPS M4K core runs AES-128 encryption in software without external crypto IC.
Được đề xuất
Educational / Maker Development Board MCU
For university embedded systems courses and maker development boards (Arduino-style shields), the PIC32MX370F512HT-I/MR offers a familiar MIPS toolchain via MPLAB X IDE and Harmony, abundant peripherals, and 512 KB Flash for student projects, RTOS demonstrations (FreeRTOS port available), or capstone designs. The VQFN-64 (MR) package drops onto standard 0.5 mm-pitch breakout boards. Compared to PIC18F4550, this part adds USB OTG, more RAM, and 32-bit arithmetic, all at a comparable per-piece price. Industrial temperature grade suits senior-design outdoor projects and senior thesis prototypes.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC32MX370F512HT-I/MR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC32MX370F512HT-V/MR | PIC32MX270F512HT-I/MR | PIC32MX350F256HT-I/MR |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-VQFN (MR, 9x9 mm) | 64-VQFN (MR, 9x9 mm) - same | 64-VQFN (MR, 9x9 mm) - same | 64-VQFN (MR, 9x9 mm) - same |
| Flash Memory | 512 KB | 512 KB | 512 KB | 256 KB |
| SRAM | 128 KB | 128 KB | 64 KB | 128 KB |
| Max CPU Speed | 80 MHz | 80 MHz | 50 MHz (I grade) | 80 MHz |
| Operating Temperature | -40C to +85C (I grade) | -40C to +105C (V grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| USB 2.0 FS OTG | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Largest SRAM in PIC32MX3/4 VQFN-64 family at 128 KB (vsPIC32MX270F512HT-I/MR)
- Full-density 512 KB Flash for richer firmware (vsPIC32MX350F256HT-I/MR)
- Extended industrial -40C to +85C operating range (vsPIC32MX330F064HT-I/MR)
Ghi chú thiết kế
The 64-VQFN (MR) package includes a large central exposed thermal pad that must be soldered to a ground copper pour for proper thermal dissipation. Recommended minimum copper area is 1 square inch on the top layer with thermal vias to inner ground planes. Estimated: at 80 MHz full CPU load (typical 60 mA active current), the die dissipates ~200 mW; without proper thermal design, junction temperature can rise above 85C ambient in enclosed housings. Refer to Microchip application note AN2584 for thermal layout guidelines.
For USB Full-Speed compliance, route the D+ and D- traces as a 90-ohm differential pair with maximum 50 mm length, keep them away from switching signals, and place a USBLC6-2SC6 ESD protection array near the USB connector. Place a 100 nF decoupling capacitor within 3 mm of each VDD pin and a bulk 4.7 uF near the IC. The exposed pad requires at least 9 thermal vias (0.3 mm drill, 0.5 mm pitch) to a 4-layer ground plane.
Common pitfalls: (1) The MCU is not 5 V tolerant - level shifters are required for 5 V peripherals on GPIO. (2) The I2C, SPI, and UART peripherals are remappable via PPS (Peripheral Pin Select); the configuration lock must be unlocked before PPS changes. (3) USB VBUS sensing requires the USB module to be properly configured with the on-chip voltage regulator enabled. (4) Industrial temperature variants use the I suffix; the V suffix is required for automotive/extended-temperature applications.
Thông tin tuân thủ
RoHS and REACH compliance per Microchip product page. Not AEC-Q100 qualified - the V/MR variant is recommended for automotive-grade applications exceeding 85C ambient. Lead-free reflow profile per JEDEC J-STD-020.
