Silicon Labs

SI3225-G-GQ Dual-Channel SLIC/Codec | Silicon Labs

MPN: SI3225-G-GQ ✓ نشط
3.3 V and 5 V Vdss 65 mA Id 64-pin TQFP, 10 mm × 10 mm Package
الحد الأدنى للطلب: 1 |

SI3225-G-GQ نظرة عامة

The Silicon Labs SI3225-G-GQ is a dual-channel SLIC and codec integrated circuit designed for analog telephone-line interfaces, with two line circuits, 3.3 V and 5 V supply operation, GCI, PCM, and SPI interfaces, and a 64-pin TQFP package. It provides external bulk-ringer support, internal diagnostics, and BORSCHT line functions for subscriber-line access equipment.

A SLIC, or Subscriber Line Interface Circuit, is the analog front end that connects a telephone line to a digital voice processor. It performs line-state monitoring, hook detection, ring detection, impedance control, DC feed, and overvoltage protection. In a ProSLIC architecture, the SLIC and voice codec are combined to reduce external components while providing a complete dual-channel line interface for central-office equipment, Voice over Packet equipment, and legacy telephone adapters.

The SI3225-G-GQ supports two circuits and is specified for both 3.3 V and 5 V supply operation. Its reported 65 mA supply current supports low-power line-interface designs. The device also implements the BORSCHT functions used for off-hook and on-hook line supervision. External bulk-ringer support distinguishes this device from SLIC variants that generate ringing internally.

The GCI interface supports direct connection to a DSP, while PCM and SPI interfaces provide additional digital connectivity options. Internal diagnostics assist development and production testing by helping identify line-interface operating conditions. The 64-TQFP package provides 64 external connections for two complete analog channels and their associated digital control, power, and interface signals.

Typical uses include central-office line-card assemblies, digital subscriber line equipment, Voice over IP media gateways, embedded telephony controllers, and multi-channel analog telephone adapters. The dual-channel architecture is particularly useful when the surrounding system must handle two subscriber lines while maintaining a common digital backplane and control interface.

Layout should prioritize short analog line paths, proper return connections, and compliant isolation or protection networks. Use the manufacturer's pin-description table, application schematic, and layout guidance when assigning tracks because the analog line pins are sensitive to parasitic capacitance, surge transients, and ground-current coupling. Decoupling and protection components should follow the recommended values and placement shown in the manufacturer documentation.

بدائل مباشرة لـ SI3225-G-GQ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع SI3225-G-GQ (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type.

Silicon Labs
Package: 64-TQFP (10x10 mm)
Product Type: Dual ProSLIC SLIC/Codec
قارن مع SI3225-G-GQ →

SI3225-G-GQR

✅ بديل مباشر
📦 64-pin TQFP (10 mm × 10 mm)
Same 64-pin TQFP dual-channel SLIC/codec configuration; ordering suffix differs by 0%, while packing and order-code details should be checked

📋 بديل مرجعي (غير موجود في الكتالوج)

SI3225-G-FQR

✅ بديل مباشر
📦 64-pin TQFP (10 mm × 10 mm)
Same SI3225 dual-channel SLIC/codec family and 64-pin TQFP package; functional ratings are unchanged in published descriptions, but regional ordering-code behavior may differ

📋 بديل مرجعي (غير موجود في الكتالوج)

SI3225-GQ

✅ بديل مباشر
Silicon Labs
📦 64-pin TQFP (10 mm × 10 mm)
Dual ProSLIC SLIC/Codec · 2 · 3.3 V, 5 V · 65 mA · 941 mW · GCI, PCM, SPI · External bulk ringer support · Up to 18 kft

تواصل لمعرفة السعر

عرض ورقة البيانات ←

SI3225-G-GQ المواصفات

Product Type Dual-channel SLIC/codec interface IC
Number of Circuits 2 circuits
Digital Interfaces GCI, PCM, and SPI
Supply Voltage Options 3.3 V and 5 V
تيار التغذية 65 mA
Power Dissipation 941 mW
نطاق درجة حرارة التشغيل -40 °C to +85 °C
العلبة 64-pin TQFP, 10 mm × 10 mm
نوع التركيب Surface mount
Ringing Support External bulk-ringer support
Line Functions BORSCHT functions
Analog Line Support Dual balanced and unbalanced ringing line functions
Diagnostics Internal diagnostics
Lead-Free Status Lead-free
Automotive Qualification Not applicable

دليل تكوين أطراف SI3225-G-GQ 64-pin tqfp, 10 mm × 10 mm

تكوين الأطراف لـ SI3225-G-GQ (حزمة 64-pin tqfp, 10 mm × 10 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 64-pin tqfp, 10 mm × 10 mm لـ SI3225-G-GQ

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ SI3225-G-GQ.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

SI3225-G-GQ مناسب لـ 6 التطبيقs: Voice over IP Media Gateway, Central Office Line Card, Analog Telephone Adapter, PBX Line Interface Module, Industrial VoIP Station, Voice Testing and Diagnostic Equipment.

🌐

Voice over IP Media Gateway

The SI3225-G-GQ fits a two-line Voice over IP media gateway because it integrates both subscriber-line interface circuits and codec functionality on one device. Its GCI, PCM, and SPI interfaces allow the gateway to connect through the digital architecture selected for the host DSP or communications processor. With a specified 65 mA supply current, the device supports two lines without requiring two separate SLIC packages. The host software must implement BORSCHT control, hook and ring-state reporting, line impedance management, and the selected digital framing format.

🏭

Central Office Line Card

The SI3225-G-GQ can terminate two analog subscriber lines on a central-office line card while sharing a common DSP backplane. Its 64-pin TQFP arrangement provides separate analog line connections together with GCI, PCM, and SPI control paths, allowing the card to support multiple line-processing modes. The external bulk-ringer feature is useful when the card architecture centralizes ringing generation. For field deployment, the line interface must be combined with the appropriate overvoltage, surge, isolation, and longitudinal balance networks.

📞

Analog Telephone Adapter

In an analog telephone adapter, the SI3225-G-GQ provides two line interfaces for connecting traditional handsets or fax equipment to a digital voice system. Integrating the SLIC and codec functions reduces the number of separate analog interface components, while GCI permits direct DSP control. The device's 3.3 V and 5 V supply options support varied telecommunications system architectures. Firmware should validate line-state transitions, ring cadence, voice-path startup, and impedance settings before enabling the adapter for field use.

🏢

PBX Line Interface Module

The SI3225-G-GQ is suitable for a two-channel PBX line module that must handle hook status, ring detection, DC feed, and analog voice termination. Its BORSCHT functions give the system a consistent hardware basis for line supervision, and the SPI or PCM connection can be used when the module architecture does not use GCI. Two channels per package can simplify routing and component placement compared with separate single-line devices. Production validation should include worst-case line current, off-hook impedance, ring voltage, and voice distortion under representative cable lengths.

🖥️

Industrial VoIP Station

The SI3225-G-GQ can support an industrial VoIP station requiring two analog endpoints for legacy handsets, paging equipment, or analog peripherals. Its -40 °C to +85 °C operating range suits temperature-controlled industrial equipment, and internal diagnostics assist commissioning and fault isolation. Because the analog lines are exposed to ESD, ringing transients, and ground potential differences, the protection network must be designed around the application. The 10 mm by 10 mm TQFP also requires thermal-aware placement and a clean return path to the system ground plane.

🔧

Voice Testing and Diagnostic Equipment

The SI3225-G-GQ can be used in line-interface test equipment because it provides two controllable subscriber-line channels and internal diagnostics. GCI or PCM connectivity allows automated equipment to exercise hook, ring, DC-feed, and line-impedance conditions through the host controller. Dual-channel operation enables parallel testing without duplicating the complete front end. The test system must still account for real line voltage, current, and ringing exposure by using suitable protection and isolation networks. Diagnostic readings should be interpreted according to the manufacturer test and calibration procedure.

ملخص المنتجات الموصى بها

SI3010-FSR Silicon Labs يُستخدم في: Voice over IP Media Gateway, Analog Telephone Adapter SI3225-G-GQR Same-family dual-channel SLIC/codec option يُستخدم في: Voice over IP Media Gateway, Analog Telephone Adapter, Industrial VoIP Station, Voice Testing and Diagnostic Equipment SI3225-GQ Silicon Labs يُستخدم في: Central Office Line Card, PBX Line Interface Module, Industrial VoIP Station SI3225-G-FQR Same-family ordering option يُستخدم في: Central Office Line Card, PBX Line Interface Module, Voice Testing and Diagnostic Equipment
What is the SI3225-G-GQ?
The SI3225-G-GQ is a dual-channel SLIC and codec interface IC for analog subscriber-line equipment. According to the Silicon Labs datasheet, it integrates two line interfaces with GCI, PCM, and SPI connectivity, supports 3.3 V and 5 V operation, and performs the BORSCHT line functions. It is packaged in a 64-pin TQFP measuring 10 mm by 10 mm.
How many telephone lines does SI3225-G-GQ support?
The SI3225-G-GQ supports two independent telephone-line circuits in one package. The manufacturer describes it as a dual-channel SLIC/codec for complete analog telephone interfaces. Its two channels are intended for Voice over Packet media gateways, central-office line cards, and similar systems requiring two subscriber lines with a shared digital control interface.
What supply voltages does SI3225-G-GQ require?
The SI3225-G-GQ supports both 3.3 V and 5 V supply operation. According to the Silicon Labs datasheet, the device has a specified supply current of 65 mA and a stated power dissipation of 941 mW. Its operating temperature range extends from -40 °C to +85 °C, making it suitable for industrial and telecommunications environments.
Where can I download the SI3225-G-GQ datasheet PDF?
The SI3225-G-GQ datasheet PDF is available through the published datasheet link listed on this page. The document identifies the IC as a dual-channel ProSLIC device and describes its line functions, digital interfaces, operating limits, and application information. Use the manufacturer's pin-description table and recommended application schematic when assigning the 64 TQFP connections.
Where can I find the SI3225-G-GQ pinout?
The SI3225-G-GQ pinout is documented in the manufacturer's pin-description and application tables for the 64-pin TQFP package. Assign each analog line, digital interface, supply, and ground connection from those tables rather than inferring connections by package position. The manufacturer datasheet is the authoritative source for the 64-pin numbering and exposed thermal requirements.
Does SI3225-G-GQ support ringing generation?
The SI3225-G-GQ supports external bulk-ringer operation rather than relying exclusively on an internal ringer implementation. According to the Silicon Labs documentation, it performs balanced and unbalanced ringing functions and includes BORSCHT line supervision. This arrangement is useful where the line card uses a centralized or external ringer and requires additional protection coordination.
What interfaces are available on SI3225-G-GQ?
The SI3225-G-GQ provides GCI, PCM, and SPI interfaces for digital connection and control. According to the manufacturer datasheet, GCI supports communication with a DSP, while PCM and SPI provide additional pathways for system integration. Interface selection should be matched to the host processor, channel format, clocking arrangement, and firmware architecture.
Is SI3225-G-GQ suitable for Voice over IP gateways?
The SI3225-G-GQ is suitable for two-channel Voice over IP gateway and media-endpoint designs because it combines two SLIC circuits with codec functionality. Its GCI, PCM, and SPI connectivity supports different host architectures, while external bulk-ringer support accommodates line cards with centralized ringing equipment. Host firmware must implement the required line-control and BORSCHT functions.
What is the difference between SI3225-G-GQ and SI3225-G-GQR?
The SI3225-G-GQR is the ordering representation associated with the same dual-channel SLIC/codec family and appears with a 64-pin TQFP package in the manufacturer-related listings. According to the product descriptions, both provide two channels, external ringing support, internal diagnostics, and lead-free construction. Confirm temperature-grade and reel or packing suffix requirements against the manufacturer ordering guide.
Can SI3225-G-FQR replace SI3225-G-GQ?
The SI3225-G-FQR can serve as a same-family migration candidate for the SI3225-G-GQ because both are identified as SI3225 dual-channel SLIC/codec devices in 64-pin TQFP packages. However, ordering codes can encode regional, temperature, or qualification differences. Compare the complete ordering tables, line parameters, and exposed-pad requirements before approving it as a drop-in production replacement.
What can replace SI3225-G-GQ?
The closest documented drop-in candidate is the SI3225-G-FQR because it belongs to the same dual-channel SLIC/codec family and uses the same 64-pin TQFP format. The SI3225-G-GQR and base SI3225-GQ ordering names identify closely related catalog entries. Validate firmware compatibility, regional line parameters, temperature grade, and analog performance before releasing any alternative.
Is there a Silicon Labs equivalent to SI3225-G-GQ?
The SI3225-G-GQ is already a Silicon Labs part, and the base SI3225-GQ ordering name refers to the same dual-channel SLIC/codec family. Related entries include the SI3225-G-GQR ordering representation and the SI3225-G-FQR family variant. Engineers should select among them using the manufacturer ordering information, particularly the country code, temperature grade, and packing configuration.
When should I choose SI3225-G-GQ over a single-channel line interface?
Choose the SI3225-G-GQ when the subsystem must terminate two analog subscriber lines while limiting the number of external interface devices. Its two-channel integration, 65 mA specified supply current, and GCI, PCM, and SPI connectivity simplify dual-line equipment. A single-channel interface may be preferable only when one line per device is required by the mechanical or channel-density design.
Where can I buy SI3225-G-GQ and check its lead time?
Use the Request a Quote form on this page to request SI3225-G-GQ availability, current lead time, and order quantities. The form provides a direct channel for confirming the exact SI3225-G-GQ ordering code, 64-pin TQFP package, and required shipment configuration. Review the confirmed commercial response before allocating the part to a production build.
What are the key specifications of SI3225-G-GQ that engineers should know?
The SI3225-G-GQ provides two SLIC and codec channels, 3.3 V and 5 V supply options, a specified 65 mA supply current, 941 mW power dissipation, and a -40 °C to +85 °C operating range. According to the Silicon Labs datasheet, GCI, PCM, and SPI interfaces, external bulk-ringer support, BORSCHT functions, and internal diagnostics define its core capabilities.

بيانات مرجعية هندسية لـ SI3225-G-GQ — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the SI3225-G-GQ for a dual-channel analog telephone-line design that uses GCI, PCM, or SPI, requires external bulk-ringer support, and must operate from -40 °C to +85 °C. The base SI3225-GQ is appropriate when its ordering configuration matches the board requirements and regional behavior. Consider SI3225-G-GQR when that documented ordering code satisfies the production packing and sourcing plan. Evaluate SI3225-G-FQR as a same-family migration candidate after checking regional line parameters, firmware support, temperature grade, and complete ordering information. A part that merely uses a 64-pin TQFP package should not be approved without confirming the pin functions, digital protocol, firmware model, line-region configuration, and exposed-pad requirements.

المقارنة مع البدائل

المعامل هذا المنتج SI3225-G-GQR SI3225-G-FQR SI3225-GQ
Package 64-pin TQFP (10 mm × 10 mm) 64-pin TQFP (10 mm × 10 mm) 64-pin TQFP (10 mm × 10 mm) 64-pin TQFP (10 mm × 10 mm)
Brand Silicon Labs Skyworks Solutions Skyworks Solutions Silicon Labs
Device Function Dual-channel SLIC/codec Dual-channel SLIC/codec Dual-channel SLIC/codec Dual-channel SLIC/codec

أبرز الفروقات

  • Two complete subscriber-line channels in one package (مقابلSI3225-GQ)
  • Three digital connectivity options (مقابلSI3225-G-FQR)
  • External bulk-ringer support and internal diagnostics (مقابلSI3225-G-GQR)
  • Specified operation across industrial temperatures (مقابلSI3225-G-FQR)

ملاحظات التصميم

Use the manufacturer application schematic and pin-description table to assign the 64 TQFP connections. Keep the two analog subscriber-line channels away from high-speed digital edges and switching-node return currents. Route each line as a matched, balanced pair where applicable, minimize stub lengths, and provide a continuous ground reference beneath the analog section. Confirm creepage and clearance against the protection devices and the highest applicable ringing or surge voltage.

Place the required bypass capacitors close to their associated supply and ground pins using the shortest possible ground-return path. Separate noisy digital return currents from the analog line circuitry and keep the 3.3 V or 5 V supply distribution controlled by the same decoupling recommendations that apply to the manufacturer reference design. Validate startup, shutdown, and supply-transient behavior in the complete line card rather than relying only on bench supply measurements.

Do not treat a similar SLIC/codec family member as interchangeable without checking line-region behavior, DSP firmware support, interface timing, and ordering codes. The SI3225-G-GQ requires GCI, PCM, or SPI compatibility as well as correct BORSCHT configuration. Also verify whether the board uses an external bulk ringer; internal-ringer variants can use different enabling procedures and protection assumptions, even when their package dimensions match.

Use the PCB thermal design and exposed-pad requirements specified by the manufacturer. The published maximum power dissipation is 941 mW, which can raise the junction temperature substantially if heat cannot escape through the package and board copper. Provide uninterrupted ground-plane area under the device where applicable, minimize thermal voids, and avoid placing it directly above heat-generating components. Confirm the operating-temperature margin in the worst ambient and line-power condition.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Yes
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The product listings identify the device as lead-free. No explicit RoHS, REACH, halogen-free, or conflict-minerals declaration was identified.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

SI3225-G-GQ datasheet SI3225-G-GQ pinout SI3225-G-GQ datasheet pdf SI3225-G-GQ specifications Silicon Labs SI3225-G-GQ SI3225-G-GQ equivalent SI3225-G-GQ replacement SI3225-G-GQ cross reference SI3225-G-GQ vs SI3225-G-GQR SI3225-G-GQ TQFP-64 footprint SI3225-G-GQ application circuit SI3225-G-GQ price SI3225-G-GQ stock SI3225-G-GQ VoIP gateway

المكونات والمصطلحات ذات الصلة

Silicon Labs SI3225-G-GQ SI3225-G-GQR SI3225-G-FQR SI3225-GQ Skyworks Solutions SLIC subscriber line interface circuit codec ProSLIC dual-channel interface IC telecommunications interface GCI PCM SPI BORSCHT bulk ringer 64-pin TQFP TQFP package family surface mount 3.3 V power supply 5 V power supply 65 mA supply current Voice over IP central office line card RoHS REACH lead-free electronics internal diagnostics
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر