SI3225-GQ - Dual ProSLIC SLIC/Codec, 64-TQFP | Silicon Labs
MPN: SI3225-GQ ✓ نشطSI3225-GQ نظرة عامة
A SLIC (Subscriber Line Interface Circuit) is the analog front end that connects a digital telephony system to the two-wire copper loop of a POTS telephone. In the system hierarchy, it sits between a VoIP gateway DSP or FPGA and the physical phone line, performing the BORSCHT functions: Battery feed, Overvoltage protection, Ringing, Signaling, Coding, Hybrid 2-to-4-wire conversion, and Testing. The SI3225-GQ is part of the Dual ProSLIC family of telecom interface ICs.
Key features include full BORSCHT function integration, external bulk ringer support (unlike the pin-related Si3220, which generates internal balanced ringing up to 65 Vrms), support for loops up to 18 kft, low standby power, and programmable operation. Compliance with LSSGR, ITU, and ETSI specifications means the device can be deployed in carrier-grade designs worldwide without redesigning the analog front end per region.
Architecturally, the device combines a CMOS line-interface section with an integrated codec and control interface. Host communication uses SPI, GCI, or PCM interfaces, so firmware-defined line parameters (impedance synthesis, gain plan, signaling thresholds) can be tuned in production. The dual-channel integration halves board area and simplifies channel matching in multi-port gateways.
Typical applications include VoIP gateways, PBX line cards, IADs (Integrated Access Devices), and wireless local-loop terminal adapters - anywhere multiple analog phone ports must be served from a digital backplane.
For design, provide a clean 5V line feed and verify thermal budget: at full talking-battery load the 941 mW maximum dissipation in a 64-TQFP requires modest but real copper area under the package for heat spreading.
This page adds value beyond the datasheet by synthesizing distributor availability, drop-in family alternatives, comparison tables, and practical design notes in one place.
بدائل مباشرة لـ SI3225-GQ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع SI3225-GQ (نفس عامل الشكل والبصمة) — يختلف في Operating Temperature, Package, Product Type, Supply Voltage, BORSCHT Functions.
SI3225-G-GQ
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←SI3225-G-FQ
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←SI3220-GQ
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←SI3220-G-GQ
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←SI3225-GQ المواصفات
| Product Type | Dual ProSLIC SLIC/Codec |
| Number of Channels | 2 |
| جهد التغذية | 3.3 V, 5 V |
| تيار التغذية | 65 mA |
| Maximum Power Dissipation | 941 mW |
| Host Interfaces | GCI, PCM, SPI |
| Ringing Method | External bulk ringer support |
| Loop Range | Up to 18 kft |
| BORSCHT Functions | Yes, all integrated |
| Standards Compliance | LSSGR, ITU, ETSI |
| درجة حرارة التشغيل | -40C to +85C |
| العلبة | 64-TQFP (10x10 mm) |
| نوع التركيب | Surface Mount |
| Process Technology | Low-voltage CMOS |
| Lead-Free Status | Lead-free |
دليل تكوين أطراف SI3225-GQ 64-tqfp (10x10 mm)
تكوين الأطراف لـ SI3225-GQ (حزمة 64-tqfp (10x10 mm)). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ SI3225-GQ.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
SI3225-GQ مناسب لـ 6 التطبيقs: VoIP Analog Gateways, PBX Line Cards, Integrated Access Devices (IAD), Wireless Local Loop Terminal Adapters, Legacy POTS Line Card Sustainment, Telecom Test and Measurement Equipment.
VoIP Analog Gateways
The SI3225-GQ is the analog line interface for VoIP gateways that convert SIP/H.323 digital streams into POTS two-wire ports. Its dual-channel integration serves two FXS ports per 64-TQFP IC, halving board area versus single-channel SLIC + codec pairs, and the PCM interface streams digitized voice directly to the gateway DSP. Full BORSCHT integration with 18 kft loop reach and LSSGR/ITU/ETSI compliance lets one hardware platform ship to multiple regional markets with firmware-only profile changes. Because ringing comes from an external bulk ringer, gateway designs sharing a centralized ringing supply across many ports keep the per-port silicon simple and the power tree efficient.
موصى به
PBX Line Cards
Enterprise PBX systems stack dozens of FXS ports on removable line cards, and the SI3225-GQ fits this use directly: two channels per IC maximize port density, the low standby power reduces card idle dissipation, and SPI/GCI control lets the card CPU program per-port impedance and signaling thresholds at slot initialization. External bulk ringer support aligns with PBX backplanes that already distribute a centralized ringing supply to all cards, avoiding per-port ring generators. The -40C to +85C rating covers unventilated equipment rooms, and programmable parameters allow one card design to serve analog trunks and station lines with firmware configuration only.
موصى به
Integrated Access Devices (IAD)
IADs combine voice FXS ports with data service in a single customer-premises unit, and the SI3225-GQ provides the analog subscriber interface. Its integrated codec eliminates a separate CODEC device on the board, the 3.3V digital rail interfaces directly to the SoC, and the 5V rail feeds the line section from a common telecom supply. Compliance with LSSGR, ITU, and ETSI specifications means the same design passes regional certification in North America and Europe by loading the appropriate firmware profile. The 18 kft loop reach covers typical subscriber drops, and external ringing keeps the compact desktop enclosure thermally comfortable by avoiding on-chip ring generation.
موصى به
Wireless Local Loop Terminal Adapters
Wireless local-loop systems terminate a radio link and present standard analog phone interfaces to existing customer telephones, and the SI3225-GQ supplies that FXS conversion. Full BORSCHT integration means one IC handles battery feed, ringing supervision, signaling, coding, hybrid conversion, and line testing, simplifying the terminal adapter design to the SI3225-GQ plus a radio module. The 64-TQFP surface-mount package suits compact outdoor enclosures, and the -40C to +85C rating matches rooftop and pole-mounted installation conditions. External bulk ringer support lets the adapter reuse the system ringing supply, and SPI control enables remote diagnostics of the copper drop during provisioning.
موصى به
Legacy POTS Line Card Sustainment
Operators and industrial facilities still maintain legacy POTS equipment for elevators, fire panels, and SCADA modems, and the SI3225-GQ serves as the interface IC for sustaining or rebuilding those line cards. Because it performs all BORSCHT functions and meets LSSGR, ITU, and ETSI specifications, a rebuilt card using this device remains compliant with the original line requirements. The 18 kft reach covers long industrial campus loops, the 941 mW maximum power keeps dense retrofit cards within legacy backplane power budgets, and the same-family alternatives (Si3220 with internal ringing up to 65 Vrms) let designers consolidate spares across card revisions.
موصى به
Telecom Test and Measurement Equipment
Line simulators, bit-error-rate testers, and POTS signature analyzers need a programmable SLIC to emulate or terminate subscriber loops, and the SI3225-GQ fits because its line impedance, gain plan, and signaling thresholds are firmware-programmed over SPI. Dual channels allow differential testing between two ports, and the 18 kft reach range supports long-loop emulations. The integrated diagnostics orientation of the ProSLIC family plus LSSGR/ITU/ETSI conformance makes emulated ports representative of deployed networks. In test racks with centralized ringing supplies, the external bulk ringer architecture avoids adding a ring generator per channel, keeping instruments cool and quiet.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ SI3225-GQ — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | SI3225-G-GQ | SI3225-G-FQ | SI3220-GQ | SI3220-G-GQ |
|---|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm) | 64-TQFP - same | 64-TQFP - same | 64-TQFP - same | 64-TQFP - same |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Channels | 2 | 2 | 2 | 2 | 2 |
| Ringing Method | External bulk ringer | External bulk ringer | External bulk ringer | Internal balanced, up to 65 Vrms | Internal balanced and unbalanced |
| Supply Voltage | 3.3 V, 5 V | 3.3 V, 5 V | 3.3 V, 5 V | 3.3 V, 5 V | 3.3 V, 5 V |
| Supply Current | 65 mA | 65 mA | 65 mA | 65 mA | 65 mA |
| Max Power Dissipation | 941 mW | 941 mW | 941 mW | 941 mW | 941 mW |
| Loop Range | 18 kft | 18 kft | 18 kft | 18 kft | 18 kft |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Interfaces | GCI, PCM, SPI | GCI, PCM, SPI | GCI, PCM, SPI | GCI, PCM, SPI | GCI, PCM, SPI |
أبرز الفروقات
- External bulk ringer support for centralized ringing architectures (مقابلSI3220-GQ)
- Dual-channel integration (مقابلsingle-channel SLIC + codec pairs)
- Carrier-grade standards compliance out of the box (مقابلSI3225-G-FQ)
ملاحظات التصميم
Estimated: at the datasheet maximum of 941 mW dissipation in a 10x10 mm 64-TQFP, with a typical theta_JA in the 40-50 C/W range for this package class on a minimal board, junction rise above ambient would be roughly 40-47 C; at +85 C ambient that approaches the junction limit. Provide a solid ground plane and at least 1 cm2 of copper under and around the package to spread heat, and verify the actual theta_JA from the manufacturer datasheet for your stack-up before finalizing the enclosure thermal budget.
The device uses separate 3.3V and 5V rails. Decouple each rail at the package pins with 100 nF ceramic capacitors plus a bulk 10 uF per rail, and ensure the 5V line-feed rail can source the talking-battery current for two ports without sagging below the regulation floor. When using the external bulk ringer, guarantee the ringing supply is current-limited and never back-feeds the 5V rail during ring cadence; the manufacturer datasheet reference design shows the recommended isolation topology.
Keep the PCM and SPI digital traces short and routed away from the tip/ring pair to prevent loop signaling corruption. The tip/ring tracks should be width-sized for on-hook and off-hook currents per the datasheet reference design and should pass over an unbroken ground plane to preserve the 2-to-4-wire hybrid balance. Place the external bulk ringer circuit close to the SI3225-GQ, and follow the manufacturer reference design for the overvoltage protection network on the line side, which is required for lightning and power-cross conditions.
The most common mistake is assuming internal ringing: the SI3225-GQ supports only external bulk ringer ringing, unlike the Si3220 which generates up to 65 Vrms on-chip. Substituting an SI3220 board with an SI3225-GQ without adding an external ringing source will leave ports unable to ring. Also confirm that firmware built for one Si3220/Si3225 variant is validated for the chosen variant before production, and match the exact suffix (GQ, G-GQ, FQ) when qualifying, since grades differ in specification detail.
معلومات الامتثال
Distributor listings (Mouser, DigiKey) describe the SI3225-GQ as lead-free. Formal RoHS/REACH/halogen-free declarations should be requested from the manufacturer for the specific date code.