SI3220-G-GQ - Dual-Channel SLIC/CODEC 64-TQFP | Skyworks
MPN: SI3220-G-GQ ✓ ActiveSI3220-G-GQ Overview
A Subscriber Line Interface Concept, or SLIC, is the analog-facing portion of a telephone subscriber-line interface. It terminates the line, manages line power, signaling, and voice-frequency signals, and provides the bridge between the analog telephone network and a digital voice-processing system. A codec performs the complementary analog-to-digital and digital-to-analog conversion functions. Integrating both functions into one IC reduces component count and simplifies the design of dual-channel voice cards, foreign-exchange equipment, voice gateways, and analog telephone adapters.
The SI3220-G-GQ combines two complete SLIC/codec channels with interfaces identified as GCI, PCM, and SPI. It supports supply voltages of 3.3 V and 5 V, with a listed supply current of 65 mA and an operating temperature range from -40 °C to +85 °C. The internal 65 Vrms balanced ringing source eliminates the need for a separate balanced ringer circuit in designs that use this feature. Internal diagnostics add another practical benefit by allowing line conditions to be examined through the device's control interface.
The SI3220-G-GQ belongs to the ProSLIC family of low-voltage CMOS devices designed to implement complete dual-channel analog telephone interfaces. Its architecture combines line termination, integrated codec functionality, ringing generation, and diagnostics in one package. The 64-TQFP construction provides a defined lead arrangement for conventional surface-mount assembly, while the 10 mm by 10 mm body accommodates two channels and their associated external line-network interfaces. Designers must observe the specified pin functions, bypass-capacitor requirements, and line-network component values in the manufacturer datasheet.
Typical uses include two-line analog phone adapters, voice-over-POTS gateways, digital subscriber line terminal equipment, PBX interface cards, and embedded voice systems. Two integrated channels make the device especially suitable where board area is constrained and each subscriber line requires independent voice processing. A 3.3 V-oriented system can use the device when its interface levels and external circuitry are compatible, while a 5 V-oriented design has a directly listed supply option. The broad -40 °C to +85 °C range also supports industrial and telecommunications temperature requirements.
The principal design consideration is the high-voltage telephone-line environment. The SLIC interface must be paired with correctly rated protection, isolation, and line-network components, and the 65 Vrms internal ringing capability does not remove the need for external overvoltage protection. Follow the manufacturer datasheet for BORSCHT-related implementation, power-supply sequencing, grounding, and test-access requirements. Confirm that the chosen protection network preserves the intended line impedance and ringing behavior.
This product record combines the exact ordering information, package identity, channel configuration, supply options, ringing capability, interface types, temperature range, and application context needed for initial design review. It also distinguishes the available family-level ordering variants and identifies where additional electrical, pin-level, lifecycle, and qualification details must be confirmed with the manufacturer datasheet before schematic release or production procurement.
Drop-in alternatives for SI3220-G-GQ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with SI3220-G-GQ (same form factor and footprint) — differing in Operating Temperature, Package, Supply Voltage, BORSCHT Functions, Number of Channels.
SI3220-G-FQR
✅ Drop-In📋 Reference alternative (not in catalog)
SI3220-G-FQ
✅ Drop-InContact for price
View Datasheet →SI3220-GQ
✅ Drop-InContact for price
View Datasheet →SI3220-G-GQR
✅ Drop-In📋 Reference alternative (not in catalog)
SI3220-G-GQ Specifications
| Product Type | Dual-Channel SLIC/CODEC Telecom Interface IC |
| Number of Channels | 2 channels |
| Interface Types | GCI, PCM, and SPI |
| Supply Voltage | 3.3 V and 5 V |
| Supply Current | 65 mA |
| Power | 941 mW |
| Operating Temperature | -40 °C to +85 °C |
| Integrated Ringing Output | 65 Vrms balanced |
| Internal Diagnostics | Supported |
| Line Interface Support | Up to 18 kft application |
| BORSCHT Functions | Supported |
| Package | 64-TQFP, 10 mm x 10 mm |
| Pin Count | 64 pins |
| Mounting Type | Surface Mount |
| Technology | Low-voltage CMOS |
| Lead-Free Status | Lead-free |
SI3220-G-GQ 64-tqfp, 10 mm x 10 mm Pin Configuration Guide
Pin configuration for SI3220-G-GQ (64-tqfp, 10 mm x 10 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for SI3220-G-GQ.
Refer to the datasheet for full pin configuration.
Typical Applications
SI3220-G-GQ is suitable for 6 applications: Dual-Line Voice-over-POTS Gateway, Analog PBX Interface Card, Two-Line Analog Phone Adapter, Voice Processor Front End, Embedded Telephone Terminal, Telecom Test and Line Diagnostics.
Dual-Line Voice-over-POTS Gateway
The SI3220-G-GQ is appropriate for a compact voice-over-POTS gateway requiring two analog subscriber-line terminations in one package. Its two integrated SLIC/codec channels can replace separate line-interface and codec assemblies, reducing board area and simplifying digital routing to the GCI, PCM, or SPI host interface. Internal 65 Vrms balanced ringing also supports centralized ringing generation. The design must still include approved overvoltage protection, isolation, and the line-network components specified by the manufacturer, because the subscriber line presents a substantially higher voltage than the 3.3 V or 5 V logic rails.
Recommended
Analog PBX Interface Card
A PBX line card can use the SI3220-G-GQ to serve two analog extensions through one 64-TQFP device. Each integrated channel provides the analog line interface and codec functions, while the digital interface connects the card controller to voice-processing logic. Two-channel consolidation is valuable when backplane and connector space is limited. Internal diagnostics assist installation and fault isolation, and the integrated balanced ringer reduces the number of external line-side functions. The 10 mm by 10 mm package still requires careful escape routing for all 64 leads and compliant protection for every telephone line.
Recommended
Two-Line Analog Phone Adapter
The SI3220-G-GQ fits a two-line analog phone adapter that must bridge telephone-network audio to a digital system. Its integrated SLIC and codec functions provide a complete per-line signal path, while the dual-channel architecture permits both lines to be handled concurrently. Internal balanced ringing at 65 Vrms supports ring-generation requirements without a separate balanced ringer source, and internal diagnostics can help identify line-state problems. Board designers should follow the recommended application circuit for protection, coupling, filtering, and grounding rather than treating the IC as a standalone line-driver.
Recommended
Voice Processor Front End
The SI3220-G-GQ can form the line-facing front end of a voice processor or communications controller. Its PCM and SPI connectivity allows a host system to configure the SLIC and exchange voice data, while GCI support is available for the appropriate line-interface arrangement. Two channels let one device service two independently managed lines and consolidate shared digital routing. The 65 mA listed supply current and 3.3 V or 5 V operating options should be checked against processor power sequencing and budget, while the line interface requires reinforced isolation appropriate to the target telephone application.
Recommended
Embedded Telephone Terminal
An embedded telephone terminal can use the SI3220-G-GQ when it needs two analog line channels without relying on external SLIC and codec packages. The integrated codec simplifies the path between the line-side analog interface and the system processor, while internal ringing and diagnostics support practical endpoint behavior. The commercial operating range of -40 °C to +85 °C accommodates industrial and telecommunications environments, subject to correct system-level thermal design. Because this is a 64-lead telecom interface IC, assembly planning must include adequate solderable area, controlled layout of sensitive analog nets, and manufacturer-approved protection components.
Recommended
Telecom Test and Line Diagnostics
The SI3220-G-GQ is useful in line-interface test equipment because it combines two subscriber-line channels, integrated ringing generation, and internal diagnostics in one IC. A test fixture can use the digital control interface to configure operating conditions and examine line behavior, reducing the need for separate line-termination electronics. The internal 65 Vrms balanced ringing source is particularly relevant to ringing-path characterization. Test-equipment designers must still enforce appropriate insulation, protection, and operator-safety boundaries around externally connected telephone lines, and must verify that their instrumentation is compatible with the selected digital interface and diagnostic functions.
Recommended
Recommended Products Summary
Engineering reference data for SI3220-G-GQ — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | SI3220-G-FQR | SI3220-G-FQ | SI3220-GQ | SI3220-G-GQR |
|---|---|---|---|---|---|
| Package | 64-TQFP, 10 mm x 10 mm | TQFP-64, 10 mm x 10 mm | TQFP-64, 10 mm x 10 mm | TQFP-64, 10 mm x 10 mm | 64-TQFP, 10 mm x 10 mm |
| Brand | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. |
| Channel Count | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Device Function | Dual-channel SLIC/codec | Dual-channel SLIC/codec | Dual-channel SLIC/codec | Dual-channel SLIC/codec | Dual-channel SLIC/codec |
Key Differentiators
- Two complete line channels in one package (vs SI3220-G-GQR)
- Integrated balanced ringing generation (vs SI3220-G-FQ)
- Built-in line diagnostics (vs SI3220-G-FQR)
- Support for two digital interface styles (vs SI3220-GQ)
Design Notes
Do not treat the internal 65 Vrms balanced ringing source as a substitute for subscriber-line overvoltage protection. The line-facing pins remain connected to an external telephone network, so use the protection network and isolation arrangement shown in the manufacturer application circuit. Confirm component voltage ratings, surge requirements, creepage, clearance, and regional line-interface compliance for the finished product rather than assuming that the IC's internal ringing rating covers the full line interface.
Route the two line-interface channels symmetrically and keep sensitive analog and ringing nets away from digital switching and clock signals. Place the manufacturer's recommended bypass capacitors directly beside the supply and ground pins, and keep the 64-TQFP thermal and ground connectivity uninterrupted by plane changes. Use the datasheet land pattern as the authority for pad dimensions, lead pitch, solder mask, and copper keepouts rather than estimating them from the 10 mm body size.
Design the 3.3 V or 5 V supply for the SI3220-G-GQ with the listed 65 mA supply-current condition in mind, while allowing additional margin for tolerance, transient load, shared peripheral circuitry, and adjacent rail behavior. Sequence the digital and line-side supplies if required by the host system, and prevent powered plug-in or unprotected line connections from producing excessive transients. Use local bulk and high-frequency decoupling to keep switching noise away from the sensitive codec and line-driver sections.
Keep the two subscriber-line channels mechanically and electrically distinct even though they share one package. Maintain consistent component orientation and symmetric routing where practical, and avoid placing high-voltage or line-network nodes beneath unrelated digital circuitry without adequate insulation strategy. After PCB fabrication, check the exposed package geometry and pin numbering against the manufacturer drawing because the available catalog information identifies the package as 64-TQFP but does not provide the individual lead functions.
Compliance Information
The component is identified as lead-free. RoHS, REACH, halogen-free, and conflict-minerals declarations were not stated in the available product information. Telecom line-interface compliance must be assessed for the finished product rather than inferred from the IC designation.