SY89200UMI - 1:8 LVDS Clock Fanout Buffer | Microchip
MPN: SY89200UMI ✓ نشطSY89200UMI نظرة عامة
A clock fanout buffer is a timing IC that receives one high-speed clock and generates multiple buffered outputs, reducing timing skew, loading, and crosstalk between clock-consuming circuits. The SY89200UMI belongs to the clock-buffer, driver, and clock-distribution hierarchy within clock-and-timing ICs. Its integrated divider and fanout functions allow a single source to feed several communications channels without using separate divider and buffer chains.
The principal features are an 8-output architecture at up to 1.5 GHz, three independently organized divide-by-1, divide-by-2, and divide-by-4 output banks, LVDS-compatible outputs, and operation from a 2.375 V to 2.625 V supply. Differential clock handling supports noise immunity in high-speed serial links, while the buffered outputs help isolate each destination from the others. The -40°C to +85°C operating range suits industrial and communications equipment.
Internally, the device combines an integrated clock divider with a low-voltage differential-signaling fanout stage. Distributing one clock through a dedicated fanout buffer limits the load presented to the clock source, reduces duty-cycle distortion, and keeps output-to-output timing variation controlled. The exposed pad provides a thermal and electrical return path when the package is soldered to a properly designed ground plane.
Typical applications include telecommunications backplanes, serial transceivers, parallel-to-serial conversion equipment, clock recovery systems, and high-speed network interfaces. It is particularly useful when several lanes require related but differently divided clocks for parallel and serial data-processing stages.
When laying out the board, treat all clock inputs and LVDS outputs as high-speed differential nets, keep the exposed pad tied to ground, and follow the manufacturer's input, output, and bypass-capacitor recommendations. Decoupling capacitance should be placed close to the supply pins, and unused outputs should be terminated according to the manufacturer's guidance to avoid unwanted reflections.
بدائل مباشرة لـ SY89200UMI — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
SY89200UMGTR
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
SY89200UMG
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
SY89200UMG-TR
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
SY89200U
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
SY89200UMI-TR
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
SY89200UMI المواصفات
| Device Type | Clock fanout buffer, divider, and multiplexer IC |
| Fanout Ratio | 1:8 |
| أقصى تردد للساعة | 1.5 GHz |
| تكوين الخرج | Three divide-by-1, divide-by-2, and divide-by-4 output banks |
| عدد المخارج | 8 LVDS outputs |
| Supported Input Formats | CML, LVDS, and PECL |
| Output Format | LVDS |
| Supply Voltage Range | 2.375 V to 2.625 V |
| Nominal Supply Voltage | 2.5 V |
| نطاق درجة حرارة التشغيل | -40°C to +85°C |
| العلبة | 32-VFQFN exposed-pad package, 5 x 5 mm |
| نوع التركيب | SMD |
| Product Series | Precision Edge |
| Internal Output Termination | 50 ohm pull-up referenced by the manufacturer |
دليل تكوين أطراف SY89200UMI 32-vfqfn exposed-pad package, 5 x 5 mm
تكوين الأطراف لـ SY89200UMI (حزمة 32-vfqfn exposed-pad package, 5 x 5 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ SY89200UMI.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
SY89200UMI مناسب لـ 6 التطبيقs: Telecommunications Backplane Clock Distribution, High-Speed Serial Transceiver Clocking, Parallel-to-Serial Data Conversion, Server and Network Interface Clock Fanout, Clock Recovery and Retiming Systems, Industrial Test and Measurement Equipment.
Telecommunications Backplane Clock Distribution
The SY89200UMI fits backplane designs that must distribute a common reference clock to several high-speed line cards. Its 1:8 fanout reduces the electrical load presented to the master clock source, while the three divide-by-1, divide-by-2, and divide-by-4 banks let parallel and serial processing sections receive related clocks. Differential CML, LVDS, or PECL input support and LVDS outputs up to 1.5 GHz suit communications backplanes with controlled-impedance interconnects.
موصى به
High-Speed Serial Transceiver Clocking
The SY89200UMI can feed multiple high-speed serial transceivers from one differential clock source, reducing fanout burden on the upstream clock generator. Eight LVDS outputs provide flexible routing into transmit, receive, and parallel-processing sections, and the integrated divide banks supply the divided references often required alongside the fundamental clock. Operation up to 1.5 GHz makes the device appropriate for high-rate lanes where output jitter and clock-source isolation are important.
موصى به
Parallel-to-Serial Data Conversion
Parallel-to-serial conversion systems often need a high-rate bit clock alongside lower-rate processing clocks. The SY89200UMI consolidates these functions by offering three divide-by-1, divide-by-2, and divide-by-4 output banks within one 1:8 fanout device. One input can therefore feed serializer lanes and adjacent digital logic without separate divider chains. The 5 x 5 mm 32-VFQFN package also conserves board area in dense conversion modules.
موصى به
Server and Network Interface Clock Fanout
Network-interface and server-class designs commonly distribute a low-jitter reference across multiple interface controllers and physical-layer devices. The SY89200UMI provides eight LVDS outputs with divided and undivided clock options, allowing one source to serve circuits operating at different clock rates. Buffering isolates the source from individual load changes and reduces the risk that one destination's termination or loading will disturb the remaining clock network.
موصى به
Clock Recovery and Retiming Systems
Clock-recovery and retiming subsystems benefit from a local distribution stage that provides multiple related clocks without repeatedly loading the recovery circuit. The SY89200UMI accepts recovered CML, LVDS, or PECL clocks and distributes them through eight LVDS outputs up to 1.5 GHz. Its three divide banks can supply both the system-rate and divided references required by digital logic, while the small package permits placement close to the destinations receiving the recovered clock.
موصى به
Industrial Test and Measurement Equipment
Precision test equipment often requires multiple synchronized clocks for converters, digitizers, and communication analyzers. The SY89200UMI supplies a 1.5 GHz-class differential fanout with selectable divide ratios, enabling a single reference to feed instrumentation channels with related timing relationships. The -40°C to +85°C operating range supports industrial environments, while the 2.375 V to 2.625 V precision supply and exposed-pad package suit controlled, thermally stable board designs.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ SY89200UMI — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | SY89200UMGTR | SY89200UMG | SY89200UMG-TR | SY89200U | SY89200UMI-TR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQPN exposed-pad package, 5 x 5 mm |
| Maximum Clock Frequency | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz |
| Fanout Ratio | 1:8 | 1:8 | 1:8 | 1:8 | 1:8 | 1:8 |
| Output Configuration | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks |
| Input Formats | CML, LVDS, and PECL | CML, LVDS, and PECL | CML, LVDS, and PECL | CML, LVDS, and PECL | CML, LVDS, and PECL | CML, LVDS, and PECL |
| Output Format | LVDS | LVDS | LVDS | LVDS | LVDS | LVDS |
| Supply Voltage Range | 2.375 V to 2.625 V | 2.375 V to 2.625 V | 2.375 V to 2.625 V | 2.375 V to 2.625 V | 2.375 V to 2.625 V | 2.375 V to 2.625 V |
| Mounting Type | SMD | SMD | SMD | SMD | SMD | SMD |
أبرز الفروقات
- Integrated three-bank clock divider plus 1:8 fanout in one device (مقابلSY89200U)
- High-speed differential clock distribution (مقابلSY89200UMG)
- Communications-oriented differential I/O (مقابلSY89200UMGTR)
ملاحظات التصميم
Treat the clock input and all LVDS outputs as high-speed differential nets. Follow the manufacturer's differential input and output topology, keep the input and output return paths on a continuous ground plane, and avoid routing the clocks over splits or noisy power-converter regions. Validate the finished layout with the clock-source impedance and the termination arrangement used by each destination circuit.
Use the manufacturer's 32-VFQFN land pattern with a solderable exposed pad connected to a low-impedance ground plane. Place input, output, and bypass capacitors close to their associated pins, and keep the data and clock nets away from high-current switching paths. The exposed pad should provide both a return path and heat spreading, so thermal-via placement should follow the package drawing.
Decouple the 2.5 V precision supply at the device with the capacitance recommended by the manufacturer and avoid long supply traces that share return current with switching loads. Confirm that each divider bank and output state is compatible with the system clock plan, because selecting the wrong divide ratio or output state can create an unintended clock even when the part is operating correctly.
Do not substitute a generic 1:8 LVDS fanout buffer without checking the integrated divider functions and pin assignments. A buffer that fans out eight clocks but lacks the required divide-by-1, divide-by-2, and divide-by-4 banks will not provide a functionally equivalent clock tree. Confirm the ordering suffix, temperature grade, exposed-pad layout, and unused-output treatment before releasing production files.
معلومات الامتثال
The component is an industrial-temperature 2.5 V clock-management IC in a 32-VFQFN exposed-pad package. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer's current product-compliance documentation.