SY89200UMI - 1:8 LVDS Clock Fanout Buffer | Microchip
料号: SY89200UMI ✓ 量产中SY89200UMI 概述
A clock fanout buffer is a timing IC that receives one high-speed clock and generates multiple buffered outputs, reducing timing skew, loading, and crosstalk between clock-consuming circuits. The SY89200UMI belongs to the clock-buffer, driver, and clock-distribution hierarchy within clock-and-timing ICs. Its integrated divider and fanout functions allow a single source to feed several communications channels without using separate divider and buffer chains.
The principal features are an 8-output architecture at up to 1.5 GHz, three independently organized divide-by-1, divide-by-2, and divide-by-4 output banks, LVDS-compatible outputs, and operation from a 2.375 V to 2.625 V supply. Differential clock handling supports noise immunity in high-speed serial links, while the buffered outputs help isolate each destination from the others. The -40°C to +85°C operating range suits industrial and communications equipment.
Internally, the device combines an integrated clock divider with a low-voltage differential-signaling fanout stage. Distributing one clock through a dedicated fanout buffer limits the load presented to the clock source, reduces duty-cycle distortion, and keeps output-to-output timing variation controlled. The exposed pad provides a thermal and electrical return path when the package is soldered to a properly designed ground plane.
Typical applications include telecommunications backplanes, serial transceivers, parallel-to-serial conversion equipment, clock recovery systems, and high-speed network interfaces. It is particularly useful when several lanes require related but differently divided clocks for parallel and serial data-processing stages.
When laying out the board, treat all clock inputs and LVDS outputs as high-speed differential nets, keep the exposed pad tied to ground, and follow the manufacturer's input, output, and bypass-capacitor recommendations. Decoupling capacitance should be placed close to the supply pins, and unused outputs should be terminated according to the manufacturer's guidance to avoid unwanted reflections.
直接替换替代料: SY89200UMI ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
SY89200UMGTR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
SY89200UMG
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
SY89200UMG-TR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
SY89200U
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
SY89200UMI-TR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
SY89200UMI 规格参数
| Device Type | Clock fanout buffer, divider, and multiplexer IC |
| Fanout Ratio | 1:8 |
| 最大时钟频率 | 1.5 GHz |
| 输出配置 | Three divide-by-1, divide-by-2, and divide-by-4 output banks |
| 输出数量 | 8 LVDS outputs |
| Supported Input Formats | CML, LVDS, and PECL |
| Output Format | LVDS |
| Supply Voltage Range | 2.375 V to 2.625 V |
| Nominal Supply Voltage | 2.5 V |
| 工作温度范围 | -40°C to +85°C |
| 封装 | 32-VFQFN exposed-pad package, 5 x 5 mm |
| 安装类型 | SMD |
| Product Series | Precision Edge |
| Internal Output Termination | 50 ohm pull-up referenced by the manufacturer |
SY89200UMI 32-vfqfn exposed-pad package, 5 x 5 mm 引脚配置指南
SY89200UMI(32-vfqfn exposed-pad package, 5 x 5 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: SY89200UMI.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SY89200UMI 适用于 6 应用s: Telecommunications Backplane Clock Distribution, High-Speed Serial Transceiver Clocking, Parallel-to-Serial Data Conversion, Server and Network Interface Clock Fanout, Clock Recovery and Retiming Systems, Industrial Test and Measurement Equipment.
Telecommunications Backplane Clock Distribution
The SY89200UMI fits backplane designs that must distribute a common reference clock to several high-speed line cards. Its 1:8 fanout reduces the electrical load presented to the master clock source, while the three divide-by-1, divide-by-2, and divide-by-4 banks let parallel and serial processing sections receive related clocks. Differential CML, LVDS, or PECL input support and LVDS outputs up to 1.5 GHz suit communications backplanes with controlled-impedance interconnects.
推荐
High-Speed Serial Transceiver Clocking
The SY89200UMI can feed multiple high-speed serial transceivers from one differential clock source, reducing fanout burden on the upstream clock generator. Eight LVDS outputs provide flexible routing into transmit, receive, and parallel-processing sections, and the integrated divide banks supply the divided references often required alongside the fundamental clock. Operation up to 1.5 GHz makes the device appropriate for high-rate lanes where output jitter and clock-source isolation are important.
推荐
Parallel-to-Serial Data Conversion
Parallel-to-serial conversion systems often need a high-rate bit clock alongside lower-rate processing clocks. The SY89200UMI consolidates these functions by offering three divide-by-1, divide-by-2, and divide-by-4 output banks within one 1:8 fanout device. One input can therefore feed serializer lanes and adjacent digital logic without separate divider chains. The 5 x 5 mm 32-VFQFN package also conserves board area in dense conversion modules.
推荐
Server and Network Interface Clock Fanout
Network-interface and server-class designs commonly distribute a low-jitter reference across multiple interface controllers and physical-layer devices. The SY89200UMI provides eight LVDS outputs with divided and undivided clock options, allowing one source to serve circuits operating at different clock rates. Buffering isolates the source from individual load changes and reduces the risk that one destination's termination or loading will disturb the remaining clock network.
推荐
Clock Recovery and Retiming Systems
Clock-recovery and retiming subsystems benefit from a local distribution stage that provides multiple related clocks without repeatedly loading the recovery circuit. The SY89200UMI accepts recovered CML, LVDS, or PECL clocks and distributes them through eight LVDS outputs up to 1.5 GHz. Its three divide banks can supply both the system-rate and divided references required by digital logic, while the small package permits placement close to the destinations receiving the recovered clock.
推荐
Industrial Test and Measurement Equipment
Precision test equipment often requires multiple synchronized clocks for converters, digitizers, and communication analyzers. The SY89200UMI supplies a 1.5 GHz-class differential fanout with selectable divide ratios, enabling a single reference to feed instrumentation channels with related timing relationships. The -40°C to +85°C operating range supports industrial environments, while the 2.375 V to 2.625 V precision supply and exposed-pad package suit controlled, thermally stable board designs.
推荐
推荐产品汇总
工程参考数据: SY89200UMI ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SY89200UMGTR | SY89200UMG | SY89200UMG-TR | SY89200U | SY89200UMI-TR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQPN exposed-pad package, 5 x 5 mm |
| Maximum Clock Frequency | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz |
| Fanout Ratio | 1:8 | 1:8 | 1:8 | 1:8 | 1:8 | 1:8 |
| Output Configuration | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks |
| Input Formats | CML, LVDS, and PECL | CML, LVDS, and PECL | CML, LVDS, and PECL | CML, LVDS, and PECL | CML, LVDS, and PECL | CML, LVDS, and PECL |
| Output Format | LVDS | LVDS | LVDS | LVDS | LVDS | LVDS |
| Supply Voltage Range | 2.375 V to 2.625 V | 2.375 V to 2.625 V | 2.375 V to 2.625 V | 2.375 V to 2.625 V | 2.375 V to 2.625 V | 2.375 V to 2.625 V |
| Mounting Type | SMD | SMD | SMD | SMD | SMD | SMD |
关键差异点
- Integrated three-bank clock divider plus 1:8 fanout in one device (对比 SY89200U)
- High-speed differential clock distribution (对比 SY89200UMG)
- Communications-oriented differential I/O (对比 SY89200UMGTR)
设计说明
Treat the clock input and all LVDS outputs as high-speed differential nets. Follow the manufacturer's differential input and output topology, keep the input and output return paths on a continuous ground plane, and avoid routing the clocks over splits or noisy power-converter regions. Validate the finished layout with the clock-source impedance and the termination arrangement used by each destination circuit.
Use the manufacturer's 32-VFQFN land pattern with a solderable exposed pad connected to a low-impedance ground plane. Place input, output, and bypass capacitors close to their associated pins, and keep the data and clock nets away from high-current switching paths. The exposed pad should provide both a return path and heat spreading, so thermal-via placement should follow the package drawing.
Decouple the 2.5 V precision supply at the device with the capacitance recommended by the manufacturer and avoid long supply traces that share return current with switching loads. Confirm that each divider bank and output state is compatible with the system clock plan, because selecting the wrong divide ratio or output state can create an unintended clock even when the part is operating correctly.
Do not substitute a generic 1:8 LVDS fanout buffer without checking the integrated divider functions and pin assignments. A buffer that fans out eight clocks but lacks the required divide-by-1, divide-by-2, and divide-by-4 banks will not provide a functionally equivalent clock tree. Confirm the ordering suffix, temperature grade, exposed-pad layout, and unused-output treatment before releasing production files.
合规信息
The component is an industrial-temperature 2.5 V clock-management IC in a 32-VFQFN exposed-pad package. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer's current product-compliance documentation.