SY89200UMI - 1:8 LVDS Clock Fanout Buffer | Microchip
MPN: SY89200UMI ✓ Hoạt độngSY89200UMI Tóm tắt
A clock fanout buffer is a timing IC that receives one high-speed clock and generates multiple buffered outputs, reducing timing skew, loading, and crosstalk between clock-consuming circuits. The SY89200UMI belongs to the clock-buffer, driver, and clock-distribution hierarchy within clock-and-timing ICs. Its integrated divider and fanout functions allow a single source to feed several communications channels without using separate divider and buffer chains.
The principal features are an 8-output architecture at up to 1.5 GHz, three independently organized divide-by-1, divide-by-2, and divide-by-4 output banks, LVDS-compatible outputs, and operation from a 2.375 V to 2.625 V supply. Differential clock handling supports noise immunity in high-speed serial links, while the buffered outputs help isolate each destination from the others. The -40°C to +85°C operating range suits industrial and communications equipment.
Internally, the device combines an integrated clock divider with a low-voltage differential-signaling fanout stage. Distributing one clock through a dedicated fanout buffer limits the load presented to the clock source, reduces duty-cycle distortion, and keeps output-to-output timing variation controlled. The exposed pad provides a thermal and electrical return path when the package is soldered to a properly designed ground plane.
Typical applications include telecommunications backplanes, serial transceivers, parallel-to-serial conversion equipment, clock recovery systems, and high-speed network interfaces. It is particularly useful when several lanes require related but differently divided clocks for parallel and serial data-processing stages.
When laying out the board, treat all clock inputs and LVDS outputs as high-speed differential nets, keep the exposed pad tied to ground, and follow the manufacturer's input, output, and bypass-capacitor recommendations. Decoupling capacitance should be placed close to the supply pins, and unused outputs should be terminated according to the manufacturer's guidance to avoid unwanted reflections.
Bộ thay thế dễ dàng lắp đặt cho SY89200UMI — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
SY89200UMGTR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
SY89200UMG
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
SY89200UMG-TR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
SY89200U
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
SY89200UMI-TR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
SY89200UMI Thông số kỹ thuật
| Device Type | Clock fanout buffer, divider, and multiplexer IC |
| Fanout Ratio | 1:8 |
| Tần số xung maksimum | 1.5 GHz |
| Cấu hình đầu ra | Three divide-by-1, divide-by-2, and divide-by-4 output banks |
| Số lượng đầu ra | 8 LVDS outputs |
| Supported Input Formats | CML, LVDS, and PECL |
| Output Format | LVDS |
| Supply Voltage Range | 2.375 V to 2.625 V |
| Nominal Supply Voltage | 2.5 V |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C |
| Hộp | 32-VFQFN exposed-pad package, 5 x 5 mm |
| Kiểu lắp đặt | SMD |
| Product Series | Precision Edge |
| Internal Output Termination | 50 ohm pull-up referenced by the manufacturer |
Hướng dẫn cấu hình chân SY89200UMI 32-vfqfn exposed-pad package, 5 x 5 mm
Cấu hình chân cho SY89200UMI (32-vfqfn exposed-pad package, 5 x 5 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SY89200UMI.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SY89200UMI phù hợp cho 6 Áp dụngs: Telecommunications Backplane Clock Distribution, High-Speed Serial Transceiver Clocking, Parallel-to-Serial Data Conversion, Server and Network Interface Clock Fanout, Clock Recovery and Retiming Systems, Industrial Test and Measurement Equipment.
Telecommunications Backplane Clock Distribution
The SY89200UMI fits backplane designs that must distribute a common reference clock to several high-speed line cards. Its 1:8 fanout reduces the electrical load presented to the master clock source, while the three divide-by-1, divide-by-2, and divide-by-4 banks let parallel and serial processing sections receive related clocks. Differential CML, LVDS, or PECL input support and LVDS outputs up to 1.5 GHz suit communications backplanes with controlled-impedance interconnects.
Được đề xuất
High-Speed Serial Transceiver Clocking
The SY89200UMI can feed multiple high-speed serial transceivers from one differential clock source, reducing fanout burden on the upstream clock generator. Eight LVDS outputs provide flexible routing into transmit, receive, and parallel-processing sections, and the integrated divide banks supply the divided references often required alongside the fundamental clock. Operation up to 1.5 GHz makes the device appropriate for high-rate lanes where output jitter and clock-source isolation are important.
Được đề xuất
Parallel-to-Serial Data Conversion
Parallel-to-serial conversion systems often need a high-rate bit clock alongside lower-rate processing clocks. The SY89200UMI consolidates these functions by offering three divide-by-1, divide-by-2, and divide-by-4 output banks within one 1:8 fanout device. One input can therefore feed serializer lanes and adjacent digital logic without separate divider chains. The 5 x 5 mm 32-VFQFN package also conserves board area in dense conversion modules.
Được đề xuất
Server and Network Interface Clock Fanout
Network-interface and server-class designs commonly distribute a low-jitter reference across multiple interface controllers and physical-layer devices. The SY89200UMI provides eight LVDS outputs with divided and undivided clock options, allowing one source to serve circuits operating at different clock rates. Buffering isolates the source from individual load changes and reduces the risk that one destination's termination or loading will disturb the remaining clock network.
Được đề xuất
Clock Recovery and Retiming Systems
Clock-recovery and retiming subsystems benefit from a local distribution stage that provides multiple related clocks without repeatedly loading the recovery circuit. The SY89200UMI accepts recovered CML, LVDS, or PECL clocks and distributes them through eight LVDS outputs up to 1.5 GHz. Its three divide banks can supply both the system-rate and divided references required by digital logic, while the small package permits placement close to the destinations receiving the recovered clock.
Được đề xuất
Industrial Test and Measurement Equipment
Precision test equipment often requires multiple synchronized clocks for converters, digitizers, and communication analyzers. The SY89200UMI supplies a 1.5 GHz-class differential fanout with selectable divide ratios, enabling a single reference to feed instrumentation channels with related timing relationships. The -40°C to +85°C operating range supports industrial environments, while the 2.375 V to 2.625 V precision supply and exposed-pad package suit controlled, thermally stable board designs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SY89200UMI — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SY89200UMGTR | SY89200UMG | SY89200UMG-TR | SY89200U | SY89200UMI-TR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQFN exposed-pad package, 5 x 5 mm | 32-VFQPN exposed-pad package, 5 x 5 mm |
| Maximum Clock Frequency | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz |
| Fanout Ratio | 1:8 | 1:8 | 1:8 | 1:8 | 1:8 | 1:8 |
| Output Configuration | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks | Three divide-by-1, divide-by-2, and divide-by-4 output banks |
| Input Formats | CML, LVDS, and PECL | CML, LVDS, and PECL | CML, LVDS, and PECL | CML, LVDS, and PECL | CML, LVDS, and PECL | CML, LVDS, and PECL |
| Output Format | LVDS | LVDS | LVDS | LVDS | LVDS | LVDS |
| Supply Voltage Range | 2.375 V to 2.625 V | 2.375 V to 2.625 V | 2.375 V to 2.625 V | 2.375 V to 2.625 V | 2.375 V to 2.625 V | 2.375 V to 2.625 V |
| Mounting Type | SMD | SMD | SMD | SMD | SMD | SMD |
Bảo phân biệt quan trọng
- Integrated three-bank clock divider plus 1:8 fanout in one device (vsSY89200U)
- High-speed differential clock distribution (vsSY89200UMG)
- Communications-oriented differential I/O (vsSY89200UMGTR)
Ghi chú thiết kế
Treat the clock input and all LVDS outputs as high-speed differential nets. Follow the manufacturer's differential input and output topology, keep the input and output return paths on a continuous ground plane, and avoid routing the clocks over splits or noisy power-converter regions. Validate the finished layout with the clock-source impedance and the termination arrangement used by each destination circuit.
Use the manufacturer's 32-VFQFN land pattern with a solderable exposed pad connected to a low-impedance ground plane. Place input, output, and bypass capacitors close to their associated pins, and keep the data and clock nets away from high-current switching paths. The exposed pad should provide both a return path and heat spreading, so thermal-via placement should follow the package drawing.
Decouple the 2.5 V precision supply at the device with the capacitance recommended by the manufacturer and avoid long supply traces that share return current with switching loads. Confirm that each divider bank and output state is compatible with the system clock plan, because selecting the wrong divide ratio or output state can create an unintended clock even when the part is operating correctly.
Do not substitute a generic 1:8 LVDS fanout buffer without checking the integrated divider functions and pin assignments. A buffer that fans out eight clocks but lacks the required divide-by-1, divide-by-2, and divide-by-4 banks will not provide a functionally equivalent clock tree. Confirm the ordering suffix, temperature grade, exposed-pad layout, and unused-output treatment before releasing production files.
Thông tin tuân thủ
The component is an industrial-temperature 2.5 V clock-management IC in a 32-VFQFN exposed-pad package. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer's current product-compliance documentation.