Texas Instruments

TAS5110DADR - 2-Channel 50W Class D Audio Amplifier | TI

MPN: TAS5110DADR ✓ نشط
32-pin HTSSOP Package
الحد الأدنى للطلب: 1 |

TAS5110DADR نظرة عامة

Texas Instruments TAS5110DADR is a two-channel Class D audio power stage designed for high-power stereo amplification, with each channel rated to deliver 50 W. The device accepts a digital PWM audio stream and is supplied in a 32-pin heat-enhanced TSSOP package. Its Class D architecture provides efficient power conversion for consumer audio, home-theater, powered-speaker, and compact multimedia equipment.

A Class D audio amplifier is a switching power amplifier that uses pulse-width modulation to reproduce an audio waveform at the output. In a true digital audio amplifier architecture, the TAS5110 operates with a separate digital audio processor such as the TAS50xx family. The processor accepts PCM audio and produces a 3.3 V PWM stream, while the TAS5110 converts that stream into high-current bridge-tied outputs capable of driving speaker loads.

The headline characteristics are two 50 W output channels, Class D operation, a 3.3 V PWM input interface, and a 32-pin HTSSOP package. The HTSSOP package is intended for surface-mount assembly and includes a thermal pad for heat transfer into the printed-circuit board. Its exposed-pad construction helps dissipate the energy associated with switching and output-stage losses.

Operationally, the TAS5110 is a digital power-output stage rather than a conventional analog input amplifier. It requires suitable digital-audio timing, clocking, and control signals from the companion processor. Differential PWM inputs allow the device to reconstruct a full-scale analog output at the speaker terminals without requiring a separate analog output filter. This architecture is intended to reduce analog distortion stages while retaining efficient class-D power conversion.

Typical uses include powered stereo speakers, active subwoofers, audiovisual receivers, compact hi-fi systems, soundbars, and multimedia speaker enclosures. The 50 W per-channel capability is particularly useful where the speaker load, enclosure volume, thermal design, and supply capability permit sustained high-power operation. Lower-power systems can also use the device, but amplifier efficiency and heat dissipation still depend on the selected supply and output-filter implementation.

PCB design should prioritize short high-current output paths, a low-impedance ground plane, adequate input bypassing, and continuous copper beneath the exposed thermal pad. The output filter and speaker interface must be selected to suit the switching frequency and load characteristics. Thermal analysis should include worst-case supply voltage, channel load, and enclosure conditions rather than relying only on nominal music-power operation.

This page consolidates the device identity, package information, verified distributor listing data, application guidance, and qualification limits into a design-oriented reference. It also distinguishes exact package substitutions from broader functional alternatives so engineers can make a PCB-level decision without confusing electrical equivalence with true drop-in compatibility.

بدائل مباشرة لـ TAS5110DADR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع TAS5110DADR (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type.

Texas Instruments
Package: 32-pin HTSSOP with exposed PowerPAD
Product Type: True Digital Audio Amplifier PWM Power Output Stage
قارن مع TAS5110DADR →

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

TAS5110DADR الحدود القصوى والخصائص الكهربائية

Product Type Stereo Class D Audio Power Amplifier
Manufacturer Texas Instruments
Channel Count 2 channels
تكوين الخرج Stereo
Rated Output Power 50 W per channel
Amplifier Class Class D
Input Signal 3.3 V PWM audio stream
العلبة 32-pin HTSSOP
نوع التركيب Surface mount
Output Topology PWM power output stage
Digital Audio Architecture True Digital Audio Amplifier (TDAA)
Signal Chain Role Digital-to-analog speaker power stage

دليل تكوين أطراف TAS5110DADR 32-pin htssop

تكوين الأطراف لـ TAS5110DADR (حزمة 32-pin htssop). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 32-pin htssop لـ TAS5110DADR

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TAS5110DADR.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

TAS5110DADR مناسب لـ 6 التطبيقs: Powered Stereo Speakers, Home Theater Amplification, Active Subwoofer, Soundbar Speaker Modules, Multimedia Speaker Enclosures, Digital Audio Reference Designs.

🔊

Powered Stereo Speakers

TAS5110DADR fits powered stereo speakers where each channel must reach 50 W and the system uses a digital-audio signal path. A TAS50xx-family processor can generate the required 3.3 V PWM stream, allowing the TAS5110 to drive the left and right outputs through suitable filtering. The 32-pin HTSSOP package supports compact speaker electronics, but its exposed thermal pad must connect to substantial PCB copper and the structure must dissipate sustained switching losses.

📺

Home Theater Amplification

The TAS5110DADR can provide two high-power amplification channels in a home-theater speaker or compact external amplifier. Its 50 W-per-channel rating suits bookshelf speakers, surround channels, and powered speaker platforms that require more output than a conventional analog headphone or line amplifier can provide. The digital source must provide a compatible 3.3 V PWM signal, and the output-filter and speaker-load design should be validated for the intended impedance and bandwidth.

🔊

Active Subwoofer

TAS5110DADR is suitable for an active subwoofer when one channel drives the woofer and the second channel is unused, or when the two outputs support a dual-driver configuration. Its 50 W-per-channel class-D output stage can suit compact subwoofer enclosures, while the digital input avoids a traditional analog power-amplifier input stage. Filter design, bass excursion protection, supply current, and continuous thermal performance remain the principal engineering constraints.

📺

Soundbar Speaker Modules

A soundbar can use TAS5110DADR to amplify compact left, right, or surround speaker modules without adding a separate analog output amplifier. The two-channel arrangement provides a straightforward stereo implementation, while 50 W per channel offers useful headroom for dynamic passages. Soundbar enclosures are thermally constrained, so exposed-pad via placement, copper spreading, speaker sensitivity, and a conservative sustained-power assumption should be addressed during mechanical design.

🖥️

Multimedia Speaker Enclosures

TAS5110DADR supports desktop and multimedia speaker enclosures requiring efficient stereo power amplification in a compact circuit. Class D operation is appropriate where heat must be removed from a constrained enclosure, and the digital PWM interface enables direct integration with a digital audio processor. Designers should select the output filters for the intended response, verify startup behavior, and include enough copper area under the 32-pin HTSSOP to control junction temperature.

🔧

Digital Audio Reference Designs

TAS5110DADR is useful when developing or evaluating a true digital audio system because it separates the digital signal-processing function from the speaker power-output function. A processor such as the TAS5000 or a related TAS50xx device can supply the 3.3 V PWM stream, while the TAS5110 performs power conversion. This partitioned approach supports modular design, repeatable timing evaluation, and focused testing of the PWM interface, output filter, speaker load, and thermal path.

ملخص المنتجات الموصى بها

TAS5000 Digital audio processor family for generating the PWM input stream يُستخدم في: Powered Stereo Speakers, Home Theater Amplification, Active Subwoofer, Soundbar Speaker Modules, Multimedia Speaker Enclosures, Digital Audio Reference Designs TAS5100A Digital audio companion family for true digital amplification يُستخدم في: Powered Stereo Speakers, Home Theater Amplification, Active Subwoofer, Soundbar Speaker Modules, Multimedia Speaker Enclosures, Digital Audio Reference Designs
What is TAS5110DADR?
TAS5110DADR is a Texas Instruments two-channel, 50 W-per-channel Class D audio power stage in a 32-pin HTSSOP package. According to the manufacturer datasheet, it is a true digital audio amplifier power-output device that accepts a 3.3 V PWM audio stream. It is intended for high-power stereo speaker systems operating with a separate TAS50xx-family digital audio processor.
Where can I download the TAS5110DADR datasheet PDF?
The TAS5110DADR datasheet PDF can be opened through the datasheet link on this page. The document is titled “TAS5110DADR Datasheet” and describes the true digital audio amplifier PWM power-output stage. Its 20-page document length and 264 KB file size are reported by the linked datasheet index, while pin assignments, timing limits, and application details should be taken from the manufacturer datasheet itself.
What is the output power of TAS5110DADR?
TAS5110DADR supports 50 W per channel and uses two output channels for stereo amplification. The manufacturer datasheet describes the TAS5110 as a high-performance true digital audio amplifier power stage. Actual acoustic output also depends on supply voltage, speaker impedance, filter selection, PCB thermal design, and the specified test conditions.
Where can I buy TAS5110DADR online?
Use the “Request a Quote” form on this page to request TAS5110DADR availability, current unit pricing, and lead time from XAIPART. The distributor listing identifies TAS5110DADR as a stereo Class D amplifier in a 32-pin HTSSOP package, but inventory and commercial terms can change. Submit the exact MPN to avoid receiving a quote for a different package or reel code.
What is the price of TAS5110DADR?
Current TAS5110DADR pricing is provided through the “Request a Quote” form on this page. The structured pricing record identifies a published unit-price reference of 11.51 USD as of November 2026, but that reference does not include a printed quantity-break table. Request a current quote for production quantities, reel packaging, and scheduled delivery.
What is the lead time for TAS5110DADR?
The current lead time for TAS5110DADR must be confirmed through the “Request a Quote” form on this page. Lead time depends on order quantity, factory inventory, scheduled production, and the requested delivery date. The listing identifies an exact 32-pin HTSSOP ordering code, TAS5110DADR, which helps ensure that the quotation covers the intended configuration.
Is TAS5110DADR in stock?
Stock status for TAS5110DADR should be confirmed through the “Request a Quote” form on this page. A distributor listing marked “ships today” is a point-in-time marketplace statement and does not establish a guaranteed allocation for larger production orders. Include the required quantity, target date, and packaging preference in the request.
TAS5110DADR vs TAS5100ADAP: which is better for a powered speaker?
TAS5110DADR is the higher-output option in this comparison because the manufacturer describes it as a 50 W-per-channel device, while the exact TAS5100ADAP output rating is not documented here. Both are Texas Instruments digital-audio families, but a valid substitution also requires compatible HTSSOP pinout, supply, clock, control, and PWM interface details. Compare those requirements in the manufacturer datasheets before choosing a replacement.
What is the difference between TAS5110DADR and TAS5110ADAD?
TAS5110DADR and TAS5110ADAD identify different orderable suffix configurations of the Texas Instruments TAS5110 family. The verified listing for TAS5110DADR identifies a 32-pin HTSSOP package and 50 W-per-channel stereo Class D operation. A suffix-level comparison should confirm whether the change is limited to reel or shipping format; any electrical differences must be checked in the manufacturer ordering information.
When should I choose TAS5110DADR over TAS5100ADAP?
Choose TAS5110DADR when the enclosure, speaker impedance, supply rail, and cooling system are designed around a 50 W-per-channel class-D power stage. TAS5110DADR also fits systems that specifically use the TAS50xx digital-audio architecture because it accepts a 3.3 V PWM stream. Choose another TI output stage only after confirming its power rating, package, pinout, timing, and control interface match the existing design.
Is TAS5110DADR suitable for an active subwoofer?
TAS5110DADR is suitable for a high-power active subwoofer when the speaker impedance, supply capability, output filter, and thermal design support the required operating point. Its two channels can also support stereo or dual-driver arrangements. Because the device is a digital PWM output stage, it requires a compatible digital-audio source rather than a conventional analog line input.
What is the best drop-in replacement for TAS5110DADR?
No drop-in replacement can be confirmed from the available manufacturer and distributor information. A valid replacement must use the identical 32-pin HTSSOP land pattern, preserve pin assignments, accept the same 3.3 V PWM input, support equivalent control and timing requirements, and provide compatible output power and thermal performance. Use the “Request a Quote” form for the exact MPN while a qualified replacement is identified.
What can replace TAS5110DADR?
A replacement for TAS5110DADR must first be treated as a PCB-level candidate rather than a generic Class D amplifier. It needs the same 32-pin HTSSOP footprint, pin-to-pin assignment, 3.3 V PWM interface, and equivalent power-stage behavior. Texas Instruments family candidates may be considered after datasheet review, while a cross-brand choice should be supported by an explicit manufacturer cross-reference and application data.
Is TAS5110DADR the same as TAS5110DAPR?
TAS5110DADR and TAS5110DAPR are distinct Texas Instruments orderable suffix codes and should not be assumed interchangeable solely because their base MPNs are similar. The verified target is TAS5110DADR in a 32-pin HTSSOP package. Check the ordering table and mechanical drawing to determine whether the suffix changes only the shipping format or also affects the delivered configuration.
Where can I find the TAS5110DADR pinout?
The complete pinout is located in the pin-description table and package drawing of the manufacturer datasheet. Assign PCB tracks from that table rather than inferring connections from another TAS51xx member. The verified package identity is 32-pin HTSSOP, and the thermal-pad connection must also be confirmed against the datasheet before copper and ground-plane design is finalized.
What are the key specifications of TAS5110DADR that engineers should know?
The principal TAS5110DADR specifications are two 50 W output channels, Class D operation, a 3.3 V PWM audio input, and a 32-pin HTSSOP package. According to the manufacturer datasheet, the device is the power-output portion of a true digital audio amplifier system and therefore needs a compatible digital processor. Its heat-enhanced package also makes PCB copper area, thermal via layout, and sustained-load calculation central to the design.

بيانات مرجعية هندسية لـ TAS5110DADR — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose TAS5110DADR when building a true digital audio power stage that needs two 50 W-per-channel outputs in a 32-pin HTSSOP package. It is particularly appropriate for powered speakers, soundbars, compact stereo systems, and active subwoofers driven by a compatible TAS50xx-family digital processor. TAS5100ADAP or TAS5100AIDAPR may be relevant to other true-digital designs, but they should not be treated as drop-in substitutes without confirming pinout, output rating, timing, supply, and control requirements. The same caution applies to TAS5110DAPR and TAS5110ADAD: differing suffix codes can represent different orderable configurations rather than exact replacements. If the system already uses a conventional analog audio input, a class-D integrated amplifier with analog input support may be easier to implement than this digital power-output stage.

المقارنة مع البدائل

المعامل هذا المنتج
Package 32-pin HTSSOP
Brand Texas Instruments
Channel Count 2 channels
Amplifier Class Class D
Rated Output Power 50 W per channel
Input Signal 3.3 V PWM audio stream
Architecture True Digital Audio Amplifier power stage
Mounting Type Surface mount

أبرز الفروقات

  • High-output stereo power stage (مقابلTAS5100ADAP)
  • True digital audio power conversion (مقابلTAS5100AIDAPR)
  • Dedicated two-channel HTSSOP implementation (مقابلTAS5110DAPR)

ملاحظات التصميم

Treat the exposed thermal pad as a mandatory heat-transfer structure rather than an optional copper feature. Place thermal vias near or within the pad footprint according to the manufacturer package drawing, maintain uninterrupted top and bottom copper paths, and avoid placing a hot section or airflow obstruction directly beneath the device. Validate the final assembly at the highest expected continuous output, supply voltage, and ambient temperature.

Use very short, low-inductance paths from the power-stage outputs to the output filters and speaker connectors. Keep the input, clock, control, and ground returns away from switching-output and filter-current areas. A continuous ground reference should sit beneath the device, while decoupling should be positioned directly between the appropriate supply pins and the ground reference to minimize high-frequency loop area.

Do not treat TAS5110DADR as a conventional analog-input audio amplifier. Its 3.3 V PWM input requires a compatible digital processor, correct clocking, and valid control timing. Confirm the output-filter topology and component values from the manufacturer application guidance before connecting a speaker, and verify that the chosen load, supply, and filter components remain within their stress limits under continuous operation.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer and distributor listing information reviewed for TAS5110DADR does not state the requested compliance or material-status classifications. Confirm these attributes with Texas Instruments before procurement.

تم التحقق من البيانات في: 2026-11-15 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

TAS5110DADR datasheet TAS5110DADR pinout TAS5110DADR datasheet pdf Texas Instruments TAS5110DADR TAS5110DADR 50W amplifier TAS5110DADR 32 HTSSOP TAS5110DADR powered speaker TAS5110DADR vs TAS5100ADAP TAS5110DADR replacement TAS5110DADR cross reference TAS5110DADR footprint TAS5110DADR price TAS5110DADR stock TAS5110DADR application circuit

المكونات والمصطلحات ذات الصلة

Texas Instruments TAS5110DADR TAS5110 TAS5000 TAS5100A TAS5100ADAP TAS5100AIDAPR TAS5110DAPR Class D amplifier audio power amplifier true digital audio amplifier TDAA PWM power-output stage 3.3 V PWM 50 W per channel 32-pin HTSSOP HTSSOP package family surface-mount package digital audio processor speaker load output filter thermal pad powered stereo speaker active subwoofer soundbar
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر