TAS5110DADR - 2-Channel 50W Class D Audio Amplifier | TI
MPN: TAS5110DADR ✓ فعالTAS5110DADR جائزہ
A Class D audio amplifier is a switching power amplifier that uses pulse-width modulation to reproduce an audio waveform at the output. In a true digital audio amplifier architecture, the TAS5110 operates with a separate digital audio processor such as the TAS50xx family. The processor accepts PCM audio and produces a 3.3 V PWM stream, while the TAS5110 converts that stream into high-current bridge-tied outputs capable of driving speaker loads.
The headline characteristics are two 50 W output channels, Class D operation, a 3.3 V PWM input interface, and a 32-pin HTSSOP package. The HTSSOP package is intended for surface-mount assembly and includes a thermal pad for heat transfer into the printed-circuit board. Its exposed-pad construction helps dissipate the energy associated with switching and output-stage losses.
Operationally, the TAS5110 is a digital power-output stage rather than a conventional analog input amplifier. It requires suitable digital-audio timing, clocking, and control signals from the companion processor. Differential PWM inputs allow the device to reconstruct a full-scale analog output at the speaker terminals without requiring a separate analog output filter. This architecture is intended to reduce analog distortion stages while retaining efficient class-D power conversion.
Typical uses include powered stereo speakers, active subwoofers, audiovisual receivers, compact hi-fi systems, soundbars, and multimedia speaker enclosures. The 50 W per-channel capability is particularly useful where the speaker load, enclosure volume, thermal design, and supply capability permit sustained high-power operation. Lower-power systems can also use the device, but amplifier efficiency and heat dissipation still depend on the selected supply and output-filter implementation.
PCB design should prioritize short high-current output paths, a low-impedance ground plane, adequate input bypassing, and continuous copper beneath the exposed thermal pad. The output filter and speaker interface must be selected to suit the switching frequency and load characteristics. Thermal analysis should include worst-case supply voltage, channel load, and enclosure conditions rather than relying only on nominal music-power operation.
This page consolidates the device identity, package information, verified distributor listing data, application guidance, and qualification limits into a design-oriented reference. It also distinguishes exact package substitutions from broader functional alternatives so engineers can make a PCB-level decision without confusing electrical equivalence with true drop-in compatibility.
کے لیے ڈراپ اِن متبادل TAS5110DADR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں TAS5110DADR (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Product Type.
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںTAS5110DADR زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | Stereo Class D Audio Power Amplifier |
| Manufacturer | Texas Instruments |
| Channel Count | 2 channels |
| آؤٹ پٹ کنفیگریشن | Stereo |
| Rated Output Power | 50 W per channel |
| Amplifier Class | Class D |
| Input Signal | 3.3 V PWM audio stream |
| پیکیج | 32-pin HTSSOP |
| ماؤنٹنگ ٹائپ | Surface mount |
| Output Topology | PWM power output stage |
| Digital Audio Architecture | True Digital Audio Amplifier (TDAA) |
| Signal Chain Role | Digital-to-analog speaker power stage |
TAS5110DADR 32-pin htssop پن کنفیگریشن گائیڈ
TAS5110DADR (32-pin htssop پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TAS5110DADR.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
TAS5110DADR کے لیے موزوں ہے 6 ایپلیکیشنs: Powered Stereo Speakers, Home Theater Amplification, Active Subwoofer, Soundbar Speaker Modules, Multimedia Speaker Enclosures, Digital Audio Reference Designs.
Powered Stereo Speakers
TAS5110DADR fits powered stereo speakers where each channel must reach 50 W and the system uses a digital-audio signal path. A TAS50xx-family processor can generate the required 3.3 V PWM stream, allowing the TAS5110 to drive the left and right outputs through suitable filtering. The 32-pin HTSSOP package supports compact speaker electronics, but its exposed thermal pad must connect to substantial PCB copper and the structure must dissipate sustained switching losses.
تجویز کردہ
Home Theater Amplification
The TAS5110DADR can provide two high-power amplification channels in a home-theater speaker or compact external amplifier. Its 50 W-per-channel rating suits bookshelf speakers, surround channels, and powered speaker platforms that require more output than a conventional analog headphone or line amplifier can provide. The digital source must provide a compatible 3.3 V PWM signal, and the output-filter and speaker-load design should be validated for the intended impedance and bandwidth.
تجویز کردہ
Active Subwoofer
TAS5110DADR is suitable for an active subwoofer when one channel drives the woofer and the second channel is unused, or when the two outputs support a dual-driver configuration. Its 50 W-per-channel class-D output stage can suit compact subwoofer enclosures, while the digital input avoids a traditional analog power-amplifier input stage. Filter design, bass excursion protection, supply current, and continuous thermal performance remain the principal engineering constraints.
تجویز کردہ
Soundbar Speaker Modules
A soundbar can use TAS5110DADR to amplify compact left, right, or surround speaker modules without adding a separate analog output amplifier. The two-channel arrangement provides a straightforward stereo implementation, while 50 W per channel offers useful headroom for dynamic passages. Soundbar enclosures are thermally constrained, so exposed-pad via placement, copper spreading, speaker sensitivity, and a conservative sustained-power assumption should be addressed during mechanical design.
تجویز کردہ
Multimedia Speaker Enclosures
TAS5110DADR supports desktop and multimedia speaker enclosures requiring efficient stereo power amplification in a compact circuit. Class D operation is appropriate where heat must be removed from a constrained enclosure, and the digital PWM interface enables direct integration with a digital audio processor. Designers should select the output filters for the intended response, verify startup behavior, and include enough copper area under the 32-pin HTSSOP to control junction temperature.
تجویز کردہ
Digital Audio Reference Designs
TAS5110DADR is useful when developing or evaluating a true digital audio system because it separates the digital signal-processing function from the speaker power-output function. A processor such as the TAS5000 or a related TAS50xx device can supply the 3.3 V PWM stream, while the TAS5110 performs power conversion. This partitioned approach supports modular design, repeatable timing evaluation, and focused testing of the PWM interface, output filter, speaker load, and thermal path.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا TAS5110DADR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Package | 32-pin HTSSOP |
| Brand | Texas Instruments |
| Channel Count | 2 channels |
| Amplifier Class | Class D |
| Rated Output Power | 50 W per channel |
| Input Signal | 3.3 V PWM audio stream |
| Architecture | True Digital Audio Amplifier power stage |
| Mounting Type | Surface mount |
اہم امتیازی خصوصیات
- High-output stereo power stage (بمقابلہTAS5100ADAP)
- True digital audio power conversion (بمقابلہTAS5100AIDAPR)
- Dedicated two-channel HTSSOP implementation (بمقابلہTAS5110DAPR)
ڈیزائن نوٹس
Treat the exposed thermal pad as a mandatory heat-transfer structure rather than an optional copper feature. Place thermal vias near or within the pad footprint according to the manufacturer package drawing, maintain uninterrupted top and bottom copper paths, and avoid placing a hot section or airflow obstruction directly beneath the device. Validate the final assembly at the highest expected continuous output, supply voltage, and ambient temperature.
Use very short, low-inductance paths from the power-stage outputs to the output filters and speaker connectors. Keep the input, clock, control, and ground returns away from switching-output and filter-current areas. A continuous ground reference should sit beneath the device, while decoupling should be positioned directly between the appropriate supply pins and the ground reference to minimize high-frequency loop area.
Do not treat TAS5110DADR as a conventional analog-input audio amplifier. Its 3.3 V PWM input requires a compatible digital processor, correct clocking, and valid control timing. Confirm the output-filter topology and component values from the manufacturer application guidance before connecting a speaker, and verify that the chosen load, supply, and filter components remain within their stress limits under continuous operation.
تعمیل کی معلومات
The manufacturer and distributor listing information reviewed for TAS5110DADR does not state the requested compliance or material-status classifications. Confirm these attributes with Texas Instruments before procurement.