TAS5110DADR - 2-Channel 50W Class D Audio Amplifier | TI
MPN: TAS5110DADR ✓ NakahandaTAS5110DADR Ulas
A Class D audio amplifier is a switching power amplifier that uses pulse-width modulation to reproduce an audio waveform at the output. In a true digital audio amplifier architecture, the TAS5110 operates with a separate digital audio processor such as the TAS50xx family. The processor accepts PCM audio and produces a 3.3 V PWM stream, while the TAS5110 converts that stream into high-current bridge-tied outputs capable of driving speaker loads.
The headline characteristics are two 50 W output channels, Class D operation, a 3.3 V PWM input interface, and a 32-pin HTSSOP package. The HTSSOP package is intended for surface-mount assembly and includes a thermal pad for heat transfer into the printed-circuit board. Its exposed-pad construction helps dissipate the energy associated with switching and output-stage losses.
Operationally, the TAS5110 is a digital power-output stage rather than a conventional analog input amplifier. It requires suitable digital-audio timing, clocking, and control signals from the companion processor. Differential PWM inputs allow the device to reconstruct a full-scale analog output at the speaker terminals without requiring a separate analog output filter. This architecture is intended to reduce analog distortion stages while retaining efficient class-D power conversion.
Typical uses include powered stereo speakers, active subwoofers, audiovisual receivers, compact hi-fi systems, soundbars, and multimedia speaker enclosures. The 50 W per-channel capability is particularly useful where the speaker load, enclosure volume, thermal design, and supply capability permit sustained high-power operation. Lower-power systems can also use the device, but amplifier efficiency and heat dissipation still depend on the selected supply and output-filter implementation.
PCB design should prioritize short high-current output paths, a low-impedance ground plane, adequate input bypassing, and continuous copper beneath the exposed thermal pad. The output filter and speaker interface must be selected to suit the switching frequency and load characteristics. Thermal analysis should include worst-case supply voltage, channel load, and enclosure conditions rather than relying only on nominal music-power operation.
This page consolidates the device identity, package information, verified distributor listing data, application guidance, and qualification limits into a design-oriented reference. It also distinguishes exact package substitutions from broader functional alternatives so engineers can make a PCB-level decision without confusing electrical equivalence with true drop-in compatibility.
Mga alternatibo na pwedeng ilagay na TAS5110DADR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok TAS5110DADR (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboTAS5110DADR Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Stereo Class D Audio Power Amplifier |
| Manufacturer | Texas Instruments |
| Channel Count | 2 channels |
| Output Kumpigurasyon | Stereo |
| Rated Output Power | 50 W per channel |
| Amplifier Class | Class D |
| Input Signal | 3.3 V PWM audio stream |
| Packhaging | 32-pin HTSSOP |
| Uri ng Pagpapasok | Surface mount |
| Output Topology | PWM power output stage |
| Digital Audio Architecture | True Digital Audio Amplifier (TDAA) |
| Signal Chain Role | Digital-to-analog speaker power stage |
Gabay sa Pin Configuration ng TAS5110DADR 32-pin htssop
Pin configuration para sa TAS5110DADR (32-pin htssop package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa TAS5110DADR.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
TAS5110DADR ay nararapat para sa 6 aplikasyons: Powered Stereo Speakers, Home Theater Amplification, Active Subwoofer, Soundbar Speaker Modules, Multimedia Speaker Enclosures, Digital Audio Reference Designs.
Powered Stereo Speakers
TAS5110DADR fits powered stereo speakers where each channel must reach 50 W and the system uses a digital-audio signal path. A TAS50xx-family processor can generate the required 3.3 V PWM stream, allowing the TAS5110 to drive the left and right outputs through suitable filtering. The 32-pin HTSSOP package supports compact speaker electronics, but its exposed thermal pad must connect to substantial PCB copper and the structure must dissipate sustained switching losses.
Inirekomenda
Home Theater Amplification
The TAS5110DADR can provide two high-power amplification channels in a home-theater speaker or compact external amplifier. Its 50 W-per-channel rating suits bookshelf speakers, surround channels, and powered speaker platforms that require more output than a conventional analog headphone or line amplifier can provide. The digital source must provide a compatible 3.3 V PWM signal, and the output-filter and speaker-load design should be validated for the intended impedance and bandwidth.
Inirekomenda
Active Subwoofer
TAS5110DADR is suitable for an active subwoofer when one channel drives the woofer and the second channel is unused, or when the two outputs support a dual-driver configuration. Its 50 W-per-channel class-D output stage can suit compact subwoofer enclosures, while the digital input avoids a traditional analog power-amplifier input stage. Filter design, bass excursion protection, supply current, and continuous thermal performance remain the principal engineering constraints.
Inirekomenda
Soundbar Speaker Modules
A soundbar can use TAS5110DADR to amplify compact left, right, or surround speaker modules without adding a separate analog output amplifier. The two-channel arrangement provides a straightforward stereo implementation, while 50 W per channel offers useful headroom for dynamic passages. Soundbar enclosures are thermally constrained, so exposed-pad via placement, copper spreading, speaker sensitivity, and a conservative sustained-power assumption should be addressed during mechanical design.
Inirekomenda
Multimedia Speaker Enclosures
TAS5110DADR supports desktop and multimedia speaker enclosures requiring efficient stereo power amplification in a compact circuit. Class D operation is appropriate where heat must be removed from a constrained enclosure, and the digital PWM interface enables direct integration with a digital audio processor. Designers should select the output filters for the intended response, verify startup behavior, and include enough copper area under the 32-pin HTSSOP to control junction temperature.
Inirekomenda
Digital Audio Reference Designs
TAS5110DADR is useful when developing or evaluating a true digital audio system because it separates the digital signal-processing function from the speaker power-output function. A processor such as the TAS5000 or a related TAS50xx device can supply the 3.3 V PWM stream, while the TAS5110 performs power conversion. This partitioned approach supports modular design, repeatable timing evaluation, and focused testing of the PWM interface, output filter, speaker load, and thermal path.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for TAS5110DADR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Package | 32-pin HTSSOP |
| Brand | Texas Instruments |
| Channel Count | 2 channels |
| Amplifier Class | Class D |
| Rated Output Power | 50 W per channel |
| Input Signal | 3.3 V PWM audio stream |
| Architecture | True Digital Audio Amplifier power stage |
| Mounting Type | Surface mount |
Pangunahing mga Pagkakaiba
- High-output stereo power stage (kumpara saTAS5100ADAP)
- True digital audio power conversion (kumpara saTAS5100AIDAPR)
- Dedicated two-channel HTSSOP implementation (kumpara saTAS5110DAPR)
Talaan ng Disenyo
Treat the exposed thermal pad as a mandatory heat-transfer structure rather than an optional copper feature. Place thermal vias near or within the pad footprint according to the manufacturer package drawing, maintain uninterrupted top and bottom copper paths, and avoid placing a hot section or airflow obstruction directly beneath the device. Validate the final assembly at the highest expected continuous output, supply voltage, and ambient temperature.
Use very short, low-inductance paths from the power-stage outputs to the output filters and speaker connectors. Keep the input, clock, control, and ground returns away from switching-output and filter-current areas. A continuous ground reference should sit beneath the device, while decoupling should be positioned directly between the appropriate supply pins and the ground reference to minimize high-frequency loop area.
Do not treat TAS5110DADR as a conventional analog-input audio amplifier. Its 3.3 V PWM input requires a compatible digital processor, correct clocking, and valid control timing. Confirm the output-filter topology and component values from the manufacturer application guidance before connecting a speaker, and verify that the chosen load, supply, and filter components remain within their stress limits under continuous operation.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer and distributor listing information reviewed for TAS5110DADR does not state the requested compliance or material-status classifications. Confirm these attributes with Texas Instruments before procurement.