Texas Instruments

TAS5613APHD - 150W Stereo Class-D Amplifier | TI

MPN: TAS5613APHD ✓ نشط
18 V to 38 V Vdss 64-pin HTQFP (PHD), 14 mm x 14 mm Package
الحد الأدنى للطلب: 1 |

TAS5613APHD نظرة عامة

The Texas Instruments TAS5613APHD is a 150 W stereo, 300 W mono, analog-input Class-D audio power stage with an 18 V to 38 V supply range, packaged in a 64-pin HTQFP (PHD) with exposed pad. It uses TI PurePath HD technology and integrated closed-loop feedback to drive speaker loads efficiently. The device supports one-channel mono or two-channel stereo operation, making it suitable for powered speakers, home-theater receivers, professional audio equipment, and automotive audio systems.

A Class-D audio amplifier is a switching power amplifier that uses transistor output stages to deliver audio energy efficiently. In the signal path, an analog input is amplified and converted into a high-frequency switching waveform. The speaker reconstructs the audio signal through its filtering characteristics. Compared with a linear output stage, Class-D architecture can reduce heat and power loss, while the TAS5613APHD adds integrated feedback for low distortion and reliable speaker drive.

Key capabilities include up to 150 W per channel into a 4-ohm stereo load, up to 300 W in mono operation, an 18 V to 38 V analog power-supply range, and integrated PurePath HD feedback. The manufacturer datasheet states that achievable output power depends on the thermal configuration of the target application. The 14 mm by 14 mm HTQFP package therefore requires careful exposed-pad heat transfer and an appropriately sized thermal design.

The device is designed for analog-input audio systems and includes active enable control, integrated feedback, and protection functions associated with the TAS5613A family. Its power-stage architecture is intended to simplify design around high-power Class-D amplification. External filtering, supply decoupling, output-network selection, and thermal-interface materials remain central to achieving clean, stable operation at high output power.

Typical applications include 150 W stereo active speakers, 300 W mono subwoofers, multi-zone residential audio, powered cinema speakers, and professional monitor amplifiers. Its dual-channel configuration can also support parallel or bridged arrangements where the board design and speaker impedance permit them. The relatively high supply requirement makes it more appropriate for mains-powered or automotive 24 V systems than for low-voltage portable equipment.

Thermal design is the primary implementation constraint. Place the exposed pad against a thermal interface and substantial copper area, then use the manufacturer datasheet’s recommended PCB layout and reference-design power-supply components. Verify output-power capability across ambient temperature, speaker impedance, supply voltage, and enclosure temperature rather than relying on the headline power rating alone.

This product summary combines the family-level power capability, package information, supply range, and application positioning with practical guidance for thermal management, board layout, sourcing, and drop-in replacement assessment. It also organizes the most relevant companion audio components and engineering trade-offs into a design-oriented reference for amplifier selection.

بدائل مباشرة لـ TAS5613APHD — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

TAS5613PHDR

✅ بديل مباشر
📦 64-pin HTQFP (PHD)
Same 150 W stereo Class-D power rating and 64-pin HTQFP format; ordering revision differs, so revision-specific pin limits and application requirements require confirmation

📋 بديل مرجعي (غير موجود في الكتالوج)

TAS5613APHDR

✅ بديل مباشر
📦 64-pin HTQFP (PHD)
Same 150 W stereo and 300 W mono power-stage ratings and 64-pin HTQFP package; ordering configuration differs while key electrical ratings remain matched

📋 بديل مرجعي (غير موجود في الكتالوج)

TAS5613A

✅ بديل مباشر
📦 64-pin HTQFP (PHD)
Same TAS5613A PurePath HD family with 150 W stereo, 300 W mono, and 18 V to 38 V ratings; the base family designation must be resolved to the exact orderable MPN

📋 بديل مرجعي (غير موجود في الكتالوج)

TAS5613APHD الحدود القصوى والخصائص الكهربائية

Product Type Class-D audio power amplifier
Amplifier Configuration 1-channel mono or 2-channel stereo
Stereo Output Power 150 W
Mono Output Power 300 W
Supply Voltage Range 18 V to 38 V
Input Type Analog input
Feedback Architecture PurePath HD integrated closed-loop feedback
العلبة 64-pin HTQFP (PHD), 14 mm x 14 mm
Exposed Pad Yes
نوع التركيب Surface mount
درجة حرارة التشغيل 105 C maximum
Recommended Speaker Load 4 ohm
Output Stage PurePath HD Class-D power stage
Enable Control Active enabled

دليل تكوين أطراف TAS5613APHD 64-pin htqfp (phd), 14 mm x 14 mm

تكوين الأطراف لـ TAS5613APHD (حزمة 64-pin htqfp (phd), 14 mm x 14 mm). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 64-pin htqfp (phd), 14 mm x 14 mm لـ TAS5613APHD

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TAS5613APHD.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

TAS5613APHD مناسب لـ 6 التطبيقs: High-Power Stereo Powered Speaker, 300W Mono Subwoofer Amplifier, Home-Theater Multi-Channel Amplifier, Professional Active Monitor, Automotive High-Power Audio, Powered Speaker and Subwoofer Platform.

🎧

High-Power Stereo Powered Speaker

The TAS5613APHD fits a powered stereo-speaker architecture requiring as much as 150 W per channel into a 4-ohm load. Its two-channel analog-input Class-D arrangement reduces the number of separate power-stage packages needed by a conventional multi-amplifier design. Place the device behind the input and gain-control network, connect the recommended LC output filtering, and use a low-noise 18 V to 38 V supply. The principal engineering benefit is high conversion efficiency, while the trade-off is a substantial 64-pin HTQFP footprint and exposed-pad cooling requirement. Continuous output must be derated according to the actual heat-sink area, PCB copper, ambient temperature, and enclosure ventilation.

🔊

300W Mono Subwoofer Amplifier

The TAS5613APHD can be configured for up to 300 W mono operation, making it appropriate for a high-output subwoofer or low-frequency monitor power stage. Use one channel for the power-amplification role and the available channel according to the manufacturer configuration guidance. The 4-ohm operating point and integrated PurePath HD feedback support efficient Class-D drive, but output distortion and thermal performance still depend on the external output network, supply impedance, PCB layout, and heat sinking. Design the enclosure for sustained low-frequency power rather than only short-duration peaks, and verify that the speaker excursion, protection circuitry, and voice-coil thermal limits suit the intended program material.

📺

Home-Theater Multi-Channel Amplifier

A multi-channel home-theater rack can use TAS5613APHD devices as efficient high-power analog-input stages behind a surround-sound decoder. The 150 W stereo capability supports demanding floor-standing speakers, while the 18 V to 38 V supply range suits higher-power amplifier modules. Its integrated closed-loop feedback helps the amplifier maintain low distortion as supply and load conditions vary. The system designer should budget several exposed-pad thermal zones, use star-point or low-impedance supply distribution, and preserve analog signal integrity between the preamplifier, gain network, and power-stage inputs. Filtering components and speaker wiring should follow the manufacturer reference circuits to avoid instability, excessive loss, or reduced protection effectiveness.

🎚️

Professional Active Monitor

The TAS5613APHD suits a professional active monitor or stage-monitor power module that requires predictable high-output Class-D amplification from an analog input. Its 150 W per-channel capability offers useful headroom for demanding monitor levels, while integrated PurePath HD feedback supports consistent speaker drive. Because studio and touring equipment is vibration-sensitive, mechanically secure the heat sink and use a thermal interface material that remains stable over the operating temperature range. Separate sensitive preamplifier grounding from the high-current output and supply return paths, and place the input filtering close to the device. Confirm the output-filter component tolerances and excursion requirements using the manufacturer application information.

🚗

Automotive High-Power Audio

The TAS5613APHD can support a high-power automotive audio amplifier where the electrical system can provide a stable 18 V to 38 V rail and the amplifier has been qualified for the vehicle environment. Its 300 W mono capability is useful for a subwoofer, while stereo operation can drive front or rear speakers. The implementation must address automotive transient protection, electromagnetic interference, ground offsets, and enclosure temperature beyond ordinary consumer-audio assumptions. The published 105 C maximum operating temperature does not by itself establish AEC-Q100 qualification. Confirm qualification, automotive validation, production status, and the exact load-dump requirements with Texas Instruments before releasing the design for vehicle use.

🔧

Powered Speaker and Subwoofer Platform

A modular powered-speaker platform can standardize on the TAS5613APHD for both a 150 W stereo main channel and a 300 W mono subwoofer channel. Because both functions use the same family architecture, the designer can simplify supply planning, control-interface design, thermal qualification, and production test procedures. Use independent enable sequencing where amplifier startup could damage downstream circuitry, and select output-filter values according to each channel’s intended crossover frequency. The key trade-off is board area: each 64-pin HTQFP device requires a substantial exposed-pad thermal area, so adjacent channels require careful copper partitioning to prevent thermal coupling between amplifiers.

What is the TAS5613APHD power output?
The TAS5613APHD supports up to 150 W per channel in stereo operation and up to 300 W in mono operation. According to the Texas Instruments manufacturer datasheet, the device is intended for 4-ohm speaker loads and can operate from an 18 V to 38 V supply. Actual continuous output depends on PCB thermal performance, heat-sink design, ambient temperature, supply voltage, and enclosure temperature.
What type of amplifier is the TAS5613APHD?
The TAS5613APHD is an analog-input Class-D audio power amplifier using TI PurePath HD integrated closed-loop feedback. It supports one-channel mono or two-channel stereo configurations and uses a 64-pin HTQFP (PHD) package with an exposed thermal pad. This high-efficiency switching output architecture is suited to powered speakers, subwoofers, home-theater equipment, and professional audio amplification.
What supply voltage does the TAS5613APHD require?
The TAS5613APHD operates from an 18 V to 38 V analog power supply. The Texas Instruments product page identifies this 18 V to 38 V range for the TAS5613A family, and the manufacturer datasheet is the controlling reference for power sequencing and component selection. A low-noise, low-output-impedance regulator is recommended for the 12 V internal supply arrangement described in the application diagrams.
Where can I download the TAS5613APHD datasheet PDF?
The official TAS5613APHD datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/tas5613.pdf. Use the manufacturer document for the PHD pin configuration, recommended application circuits, external component values, exposed-pad layout, and thermal guidance. The verified search results also identify the family documentation as 33 pages, although the manufacturer PDF remains the authoritative copy for design work.
Where can I find the TAS5613APHD pinout?
The TAS5613APHD uses a 64-pin HTQFP (PHD) package, but a complete numbered pin list is not published in the verified excerpts used for this page. Use the PHD package drawing and pin-description table in the Texas Instruments manufacturer datasheet before assigning PCB tracks. Do not infer individual signal names from the exposed-pad drawing alone, because power, ground, feedback, and filtering connections must follow the manufacturer pin table exactly.
What is the difference between TAS5613APHD and TAS5613PHDR?
Both parts are identified as 150 W Class-D devices in the 64-pin HTQFP family, but their ordering identities and documentation references differ. The verified comparison identifies TAS5613PHDR as the non-A-ordering counterpart to TAS5613APHD. For a physical replacement, confirm that the exact pin names, exposed-pad connections, supply limits, and application circuits in the relevant datasheet revision match before production use.
When should I choose TAS5613APHD over a lower-power Class-D amplifier?
Choose the TAS5613APHD when the load requires up to 150 W per channel in stereo mode or up to 300 W in mono mode and the board can support an 18 V to 38 V supply. A lower-power amplifier is preferable when the speaker load needs less energy, the available supply is lower, or the thermal design cannot remove the required heat. Its 64-pin PHD package is physically larger and more demanding than a compact integrated Class-D solution.
Is TAS5613APHD suitable for an automotive audio system?
The TAS5613APHD may suit an automotive audio architecture only after its environmental, qualification, load-dump, EMI, and operating-temperature requirements are verified for the target vehicle. Its published operating-temperature maximum is 105 C, but that figure alone does not establish AEC-Q100 qualification. Confirm the exact qualification status, automotive power protections, and transient requirements with Texas Instruments before using the device in a safety- or compliance-sensitive vehicle design.
Where can I buy TAS5613APHD and check its lead time?
Use the Request a Quote form on this page to request TAS5613APHD availability, current lead time, minimum order quantity, and a quotation. The component is offered as a tray-packaged 64-pin HTQFP with an exposed pad. Quote requests are preferable to static stock claims because amplifier inventory, allocation, and delivery schedules can change quickly.
How much does the TAS5613APHD cost?
Use the Request a Quote form on this page for the current TAS5613APHD unit price, volume pricing, stock, and lead time. Quotation-based pricing reflects the requested quantity, package configuration, market availability, and supporting components. The pricing panel on the page provides the current commercial response without embedding a potentially stale figure into the technical description.
Is TAS5613APHD currently in stock?
Current TAS5613APHD stock should be confirmed through the Request a Quote form on this page. Inventory can vary by package and order quantity, and a distributor landing page does not guarantee a specific quantity is immediately available. For production planning, request the current factory and distribution lead time together with the confirmed package suffix and intended delivery schedule.
What can replace the TAS5613APHD?
TAS5613PHDR is the closest same-family replacement candidate identified in the verified comparison information, and TAS5613APHDR is identified as a pin-compatible ordering option within the TAS5613A family. Both use the 64-pin HTQFP format. A valid drop-in decision still requires checking revision-specific pin functions, limits, exposed-pad layout, and datasheet application requirements; a matching package alone is not sufficient.
Can TAS5613APHDR replace TAS5613APHD without changing the PCB?
The verified compatibility information identifies TAS5613APHDR as pin-compatible with TAS5613APHD in most configurations, and both are 64-pin HTQFP devices in the same amplifier family. The suffix difference normally distinguishes ordering or shipping configuration rather than a different land pattern. Before substitution, verify that the exposed pad, pin assignment, supply limits, and thermal requirements are identical for the exact purchased part numbers.
What are the key specifications of TAS5613APHD that engineers should know?
The principal TAS5613APHD specifications are 150 W stereo output, 300 W mono output, an 18 V to 38 V supply range, analog input, PurePath HD feedback, and a 64-pin HTQFP (PHD) package with an exposed pad. These values come from the Texas Instruments product page and manufacturer datasheet. Thermal construction and output-network design are as important as the headline power rating in a practical high-power design.
How should the TAS5613APHD be thermally managed?
Couple the TAS5613APHD exposed pad to a heat spreader or heat sink with a suitable thermal-interface material, and provide substantial copper area beneath the package. The Texas Instruments datasheet states that achievable output power depends on thermal configuration and recommends following the TAS5613A reference-design PCB layout. Validate the assembly at the highest expected enclosure temperature, supply voltage, and continuous speaker load.

بيانات مرجعية هندسية لـ TAS5613APHD — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose TAS5613APHD when designing a high-power analog-input Class-D stage that must deliver up to 150 W per channel in stereo mode or up to 300 W in mono mode from an 18 V to 38 V supply. It is particularly appropriate for powered speakers, subwoofers, home-theater amplification, professional monitors, and selected automotive audio systems where adequate exposed-pad cooling can be implemented. TAS5613PHDR is the closest same-family alternative identified by the available cross-reference information, but the exact revision-specific pin limits and application requirements must be checked before substitution. TAS5613APHDR provides another ordering configuration with matching class-level power ratings and the same 64-pin HTQFP format, while TAS5613A denotes the broader family orderable identity. For lower-power speakers, lower-voltage portable systems, or compact products, a smaller Class-D amplifier will generally reduce board area and thermal complexity. For automotive deployment, confirm AEC-Q100 status and transient requirements explicitly rather than inferring automotive suitability from the 105 C maximum operating temperature.

المقارنة مع البدائل

المعامل هذا المنتج TAS5613PHDR TAS5613APHDR TAS5613A
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 64-pin HTQFP (PHD), 14 mm x 14 mm 64-pin HTQFP 64-pin HTQFP 64-pin HTQFP (PHD)
Stereo Output Power 150 W 150 W 150 W 150 W
Amplifier Class Class D Class D Class D Class D
Input Type Analog input Analog input Analog input Analog input
Ordering Configuration TAS5613APHD tray configuration TAS5613PHDR ordering identity TAS5613APHDR ordering identity TAS5613A family designation

أبرز الفروقات

  • Combines 150 W stereo and 300 W mono capability in one analog-input power stage (مقابلTAS5613PHDR)
  • Uses a manufacturer-documented 64-pin HTQFP power-stage package (مقابلTAS5613A)
  • Integrated PurePath HD feedback supports efficient Class-D operation (مقابلTAS5613APHDR)
  • Tray ordering identity targets production and direct-board assembly workflows (مقابلTAS5613APHDR)

ملاحظات التصميم

Use the exposed pad as the primary thermal path and couple it to the heat sink through an appropriate high-conductivity interface material. The Texas Instruments datasheet states that achievable output power depends on the thermal configuration, so do not assume the 150 W stereo or 300 W mono ratings apply to an unrestricted copper pour. Validate the final assembly with the intended heat sink, enclosure airflow, ambient temperature, supply voltage, and continuous load.

Follow the TAS5613A reference-design PCB layout for the power-supply components and high-current paths. Keep the analog input routing away from output-switching nodes and the 18 V to 38 V supply distribution. Use short, wide copper for ground and supply connections, minimize loop area, and maintain the exposed-pad solder and via structure specified by the manufacturer. The 12 V internal supply arrangement called out in the datasheet should originate from a low-noise, low-output-impedance regulator.

Place the external output-filter components and their return connections according to the manufacturer application diagrams. Keep sensitive input and feedback traces short and away from the switching output node and inductor. Route the two output channels with adequate separation to minimize crosstalk, and connect the device ground and exposed pad as directed rather than relying on a narrow thermal or signal-ground path. Review the complete pin-description table before finalizing track assignments.

Do not select the amplifier from headline wattage alone. Confirm minimum and maximum supply voltage, speaker impedance, output-filter topology, thermal conditions, and protection requirements for the exact ordering part. When replacing TAS5613APHD with TAS5613PHDR, TAS5613APHDR, or another TAS5613A ordering identity, verify the applicable datasheet revision and pin table. A matching 64-pin HTQFP outline does not by itself prove that every limit and configuration is identical.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The verified excerpts do not provide specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Automotive qualification must be confirmed directly with Texas Instruments for vehicle applications.

عمليات بحث ذات صلة

TAS5613APHD datasheet TAS5613APHD pinout TAS5613APHD datasheet pdf TAS5613APHD equivalent TAS5613APHD replacement TAS5613APHD cross reference TAS5613APHD price TAS5613APHD stock TAS5613APHD 150W amplifier TAS5613APHD 64 HTQFP TAS5613APHD subwoofer application TAS5613APHD vs TAS5613PHDR Texas Instruments TAS5613APHD TAS5613A 300W mono amplifier

المكونات والمصطلحات ذات الصلة

Texas Instruments TAS5613APHD TAS5613PHDR TAS5613APHDR TAS5613A Class-D amplifier analog-input power amplifier audio power stage PurePath HD integrated closed-loop feedback HTQFP PHD package QFP package family surface-mount package 150 W stereo power 300 W mono power 18 V to 38 V supply 4-ohm speaker load exposed thermal pad powered speaker subwoofer amplifier home-theater amplifier professional audio monitor automotive audio active enable control output filter
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر