Texas Instruments

TCA5405RUGR - 5-Bit 1-Wire I/O Expander | Texas Instruments

MPN: TCA5405RUGR ✓ نشط
1.65 V to 3.6 V Vdss X2QFN RUG, 8 pins Package 1 internal clock Speed
الحد الأدنى للطلب: 1 |

TCA5405RUGR نظرة عامة

The Texas Instruments TCA5405RUGR is a 5-bit, self-timed, single-wire output expander with a 1.65 V to 3.6 V supply range, eight pins, and a compact 1.5 mm × 1.5 mm X2QFN RUG package. It is designed to add five controlled outputs to a portable embedded system while requiring only one communication line from the master device. The low-voltage operating range makes the device especially suitable for battery-powered and low-voltage mobile equipment.

An output expander is an interface IC that increases the number of controllable outputs available from a microcontroller or other host device. The TCA5405 belongs to the I/O expander hierarchy, where a serial data input causes a group of output channels to change state according to a timing-controlled protocol. Unlike a conventional parallel GPIO port, this device uses a self-timed serial protocol synchronized to an internal clock, reducing the number of host interface signals required.

The primary features of the TCA5405RUGR include five output channels, a wide 1.65 V to 3.6 V VCC operating range, a single-wire input, and a self-timed serial data protocol. Its 0.5 mm terminal pitch and 1.5 mm × 1.5 mm body support compact PCB layouts. The manufacturer specifies an operating temperature range of -40°C to +85°C, making the device suitable for industrial and extended-temperature portable applications when the surrounding system meets its electrical and mechanical requirements.

In operation, the master device establishes the bit period during a Setup phase. The TCA5405 then uses that timing information to control the five outputs without requiring a separate clock line. This self-timed architecture simplifies connections in space-constrained systems, although the host firmware must generate the required waveform accurately. The protocol timing, output behavior, and electrical limits should be implemented according to the timing diagrams in the Texas Instruments manufacturer datasheet.

Typical applications include portable media players, cellular phones, personal digital assistants, and other low-voltage systems in which a host controller needs extra discrete outputs. The device can expand an output-limited controller, support controlled indicators or peripheral signaling, and reduce the pin count required from the host integrated circuit. Its small RUG package is particularly useful when component area and routing density are more important than a large through-hole footprint.

A key design consideration is the relationship between supply voltage, output behavior, and the master-generated timing waveform. Keep the single data trace short, provide a stable supply, and validate the Setup and output timing over the full operating-temperature range. Do not assume that a cross-reference device with a similar function is pin-to-pin compatible; confirm package geometry, pin assignment, supply range, and protocol timing before making a replacement.

This product summary organizes the TCA5405RUGR function, voltage limits, package details, replacement constraints, comparison points, and application guidance into one engineering reference. It emphasizes the information needed to assess footprint reuse, interface timing, low-voltage operation, and the distinction between a functional substitute and a true drop-in replacement.

بدائل مباشرة لـ TCA5405RUGR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

TCA5405RUGR المواصفات

Product Type 5-bit single-wire output expander
Number of Output Channels 5 channels
Supply Voltage Range 1.65 V to 3.6 V
Nominal Supply Voltage 2.3 V
Communication Interface 1-wire serial input
Serial Protocol Self-timed
Internal Clock 1 internal clock
Setup Phase 1 setup phase for bit-period sampling
Package Type X2QFN RUG, 8 pins
Package Body Dimensions 1.5 mm × 1.5 mm
Terminal Pitch 0.5 mm
نطاق درجة حرارة التشغيل -40°C to +85°C
نوع التركيب Surface mount
Number of Terminals 8 terminals
Primary Application Portable low-voltage systems
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown

دليل تكوين أطراف TCA5405RUGR 1.5 mm × 1.5 mm

تكوين الأطراف لـ TCA5405RUGR (حزمة 1.5 mm × 1.5 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 1.5 mm × 1.5 mm لـ TCA5405RUGR

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TCA5405RUGR.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

TCA5405RUGR مناسب لـ 6 التطبيقs: Portable Media Player Controls, Cell Phone Peripheral Signaling, Low-Voltage Sensor Interface Control, Personal Digital Assistant Expansion, Battery-Powered IoT Module, Portable Accessory Control.

📱

Portable Media Player Controls

The TCA5405RUGR fits portable media players that need additional controlled outputs from a pin-constrained host controller. Its five output channels and single serial data input allow a system to add peripheral-control functions without allocating a full parallel GPIO port. The 1.65 V to 3.6 V operating range aligns with low-voltage portable rails, while the 1.5 mm × 1.5 mm X2QFN package reduces board area. The host firmware must reproduce the Setup phase and subsequent timing defined by the Texas Instruments manufacturer datasheet, particularly when the battery voltage varies during operation.

📱

Cell Phone Peripheral Signaling

The TCA5405RUGR can extend control signaling in a cell phone or similar handheld product where the application processor has limited available output pins. Five separately addressed outputs are available through the self-timed single-wire interface, making the device suitable for peripheral enables, status functions, or other discrete controls. Its 2.3 V nominal operating point and 1.65 V to 3.6 V supply range suit low-voltage portable architectures. Compact placement in the 8-pin RUG package preserves routing space, but the complete waveform must remain within the timing and electrical limits in the manufacturer datasheet.

🧩

Low-Voltage Sensor Interface Control

The TCA5405RUGR can provide auxiliary control outputs in a compact sensor module powered from a low-voltage rail. A host microcontroller can use the single-wire interface to operate five peripheral-control lines instead of dedicating multiple GPIO pins to the same function. The 1.65 V to 3.6 V operating range supports low-energy sensor systems, while the compact 1.5 mm × 1.5 mm package helps preserve space in wearable and IoT-style assemblies. Validate signal timing at the module’s minimum supply voltage and ensure the master waveform meets the Setup requirements described by Texas Instruments.

📱

Personal Digital Assistant Expansion

The TCA5405RUGR is suited to personal digital assistant and feature-phone designs where compact auxiliary output control is needed. Five outputs are managed through one self-timed serial input, helping the host avoid a wider parallel interface and reducing PCB routing requirements. The device’s 8-pin RUG package and 0.5 mm pitch support fine-pitch assembly, while its low-voltage operation is appropriate for portable system rails. Firmware and hardware should use the manufacturer’s Setup and timing diagrams, and outputs must remain within their specified load and voltage conditions.

🧩

Battery-Powered IoT Module

A battery-powered IoT module can use the TCA5405RUGR to add five controllable outputs while preserving the host controller’s limited pin budget. The interface uses one data line and relies on a master-generated timing sequence, making it appropriate for compact equipment whose enclosure and connector space are constrained. Its 1.65 V to 3.6 V range supports low-voltage power architecture, and the -40°C to +85°C specification covers many extended-temperature deployments. Designers should test operation across battery discharge conditions and verify that the serial timing remains reliable at the lowest usable supply voltage.

🔧

Portable Accessory Control

The TCA5405RUGR can expand control of accessories connected to a portable electronic system. Five outputs allow a host to manage enables, indicators, mode controls, or other discrete peripheral functions through a single serial input. The compact X2QFN RUG package is useful where connector placement and component density limit the available PCB area. Its low-voltage operation is compatible with portable rails from 1.65 V to 3.6 V, but the accessory loads, logic levels, and timing must be checked independently. Use the manufacturer datasheet to establish the required host sequence and output conditions.

ملخص المنتجات الموصى بها

TCA5405 Base device family for low-voltage single-wire output expansion يُستخدم في: Portable Media Player Controls, Cell Phone Peripheral Signaling, Low-Voltage Sensor Interface Control, Personal Digital Assistant Expansion, Battery-Powered IoT Module, Portable Accessory Control TCA9536 Functional I/O-expander alternative for additional evaluation يُستخدم في: Portable Media Player Controls TCA9517 Functional single-wire output-expansion alternative يُستخدم في: Cell Phone Peripheral Signaling PCA9533 Functional I/O-expansion candidate for protocol evaluation يُستخدم في: Low-Voltage Sensor Interface Control NCP81074 Functional low-side switching alternative يُستخدم في: Personal Digital Assistant Expansion L9930 Functional output-driver alternative يُستخدم في: Battery-Powered IoT Module BTS50030 Functional low-side switch alternative يُستخدم في: Portable Accessory Control
What is the operating voltage of the TCA5405RUGR?
The TCA5405RUGR operates from 1.65 V to 3.6 V. According to the Texas Instruments product page and manufacturer datasheet, this wide low-voltage range supports portable systems operating from low-voltage rails. A nominal operating voltage of 2.3 V is also listed for the device. Keep the supply and signal levels within the specified limits across temperature, and confirm timing behavior at the actual minimum and maximum supply voltages used by the product.
What does the TCA5405RUGR do?
The TCA5405RUGR is a 5-bit, self-timed, single-wire output expander. It adds five controlled output channels to a host device while using one serial data input rather than a parallel bus. According to the Texas Instruments manufacturer datasheet, the master device samples the bit period during a Setup phase, after which the TCA5405 operates from its internal clock. This arrangement is useful when a portable controller has too few available output pins.
What package does the TCA5405RUGR use?
The TCA5405RUGR uses an 8-pin X2QFN package identified as RUG. The Texas Instruments product page specifies a 1.5 mm × 1.5 mm body and 8 pins, while another product listing identifies a 0.5 mm terminal pitch and 8 terminals. The corresponding package diagram key is qfn-8. Before placing a replacement, verify land pattern, exposed-pad requirements, pin numbering, and the manufacturer pin-description table.
Where can I download the TCA5405RUGR datasheet PDF?
The official Texas Instruments datasheet is available through the manufacturer’s TCA5405 document link at https://www.ti.com/lit/gpn/TCA5405. It is the primary reference for the Setup-phase timing, output transition behavior, electrical characteristics, package dimensions, and recommended operating conditions. Use the pin-description table and timing diagrams from this document when assigning PCB tracks or implementing the master-device waveform.
Where can I find the TCA5405RUGR pinout?
The pinout should be taken from the pin-description table and package drawing in the Texas Instruments TCA5405 manufacturer datasheet. The device is offered in an 8-pin X2QFN RUG package, but the exact signal assigned to every terminal is not shown in the product-page summary. Assign the footprint only after matching the numbered terminals and any exposed-pad connection shown in the official package drawing.
What is the best drop-in replacement for TCA5405RUGR?
No replacement can be confirmed as a true drop-in substitute for the TCA5405RUGR from the available cross-reference information. A drop-in device must use the same 1.5 mm × 1.5 mm 8-pin footprint, match the pin assignments, operate across 1.65 V to 3.6 V, and reproduce the self-timed single-wire protocol. The identified candidates are functional alternatives whose package and protocol compatibility must be verified before substitution.
Can TCA5405RUGR be replaced by TCA9536?
The TCA9536 is a possible functional alternative, but it should not be treated as a confirmed drop-in replacement for the TCA5405RUGR. The Texas Instruments support discussion identifies the TCA9536 in connection with replacement requests, while the target uses five outputs and a self-timed single-wire protocol in an 8-pin RUG package. Check channel count, supply limits, logic levels, package geometry, pinout, and serial protocol on each manufacturer datasheet.
TCA5405RUGR vs TCA9517 - which is better for a low-voltage portable device?
The TCA5405RUGR is the clearer choice when the system specifically requires five outputs, a 1.65 V to 3.6 V supply range, and a self-timed single-wire interface in the 8-pin RUG package. The TCA9517 is identified as a functional equivalent candidate, but equivalent voltage, current, timing, and package claims are not established here. Select it only after its manufacturer datasheet confirms equivalent pinout, footprint, supply range, and protocol behavior.
When should I choose the TCA5405RUGR over a conventional GPIO expander?
Choose the TCA5405RUGR when the design needs exactly five outputs and can implement the manufacturer-defined self-timed waveform from the host controller. Its single data input conserves host pins, and its 1.5 mm × 1.5 mm package supports compact layouts. A conventional I2C or SPI GPIO expander may be easier to support in firmware, but it usually requires more signals and may use a different package.
Is the TCA5405RUGR suitable for battery-powered equipment?
Yes, the TCA5405RUGR is suitable for battery-powered equipment that operates within a 1.65 V to 3.6 V supply range. The Texas Instruments manufacturer datasheet identifies portable applications as a key use for the low-voltage device. Battery systems should also account for rail variation, output drive requirements, and the time needed for the host controller to generate the required Setup and output timing.
How many host interface pins does the TCA5405RUGR require?
The TCA5405RUGR requires one serial data input for its self-timed communication protocol. According to the Texas Instruments manufacturer datasheet, the master device samples the bit period during a Setup phase and synchronizes subsequent operation to the TCA5405 internal clock. This single-wire approach can reduce host-controller pin usage compared with a five-channel parallel output arrangement, although the host still needs a suitable power connection.
What is the operating temperature range of the TCA5405RUGR?
The TCA5405RUGR is specified for -40°C to +85°C. According to the Texas Instruments product details, the 8-pin RUG package supports this extended operating range. The limit applies to the integrated circuit itself and does not remove the need to verify the host waveform, supply tolerances, output load, and thermal conditions of the assembled product across the full temperature range.
Where to buy TCA5405RUGR online?
Use the Request a Quote form on this page to ask for TCA5405RUGR availability, MOQ, and current lead time. The form is the appropriate sourcing channel for a request, while the structured listings on this page can be used to identify the exact orderable MPN. Confirm that any quoted configuration is TCA5405RUGR, the 8-pin RUG package, and not another TCA5405 orderable variant.
What is the price of TCA5405RUGR?
Submit a purchase request through the Request a Quote form on this page for a current TCA5405RUGR quotation. Pricing can change with quantity, package configuration, availability, and market conditions, so a static figure would not be dependable. Include the required quantity, target packaging, delivery location, and production schedule so the supplier can return an actionable quote.
Is TCA5405RUGR in stock and what is its lead time?
Current stock and lead time should be confirmed through the Request a Quote form on this page. The manufacturer lists TCA5405RUGR as an orderable part, but inventory can vary by quantity and shipment date. State the required order quantity, reel or other packing format, date code requirement, and delivery destination when requesting the quotation and manufacturing schedule.
What are the key specifications engineers should know about the TCA5405RUGR?
The key specifications are five output channels, a 1.65 V to 3.6 V operating range, one self-timed serial input, an 8-pin X2QFN RUG package, and a -40°C to +85°C operating range. According to the Texas Instruments product page, the package measures 1.5 mm × 1.5 mm. Engineers should also check the Setup-phase timing, output characteristics, absolute maximum ratings, and pin assignments in the manufacturer datasheet.

بيانات مرجعية هندسية لـ TCA5405RUGR — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the TCA5405RUGR when a low-voltage host controller needs exactly five controlled outputs, the system can implement the self-timed single-wire sequence, and board area is tightly constrained. Its 1.65 V to 3.6 V operating range, 1.5 mm × 1.5 mm RUG package, and -40°C to +85°C rating fit portable and extended-temperature equipment. Consider TCA9517, NCP81074, PCA9533, L9930, or BTS50030 only after confirming that the required function is genuinely compatible; the available cross-reference information identifies functional alternatives but does not establish a pin-to-pin drop-in match. TCA9536 may be attractive when a conventional GPIO expander is acceptable, but it requires separate protocol and footprint validation. For an existing TCA5405RUGR PCB, reuse of the original part is the lowest-risk choice unless the replacement has been checked for package dimensions, pin numbering, supply limits, timing, logic levels, output loads, and exposed-pad requirements.

المقارنة مع البدائل

المعامل هذا المنتج
Package 8-pin X2QFN RUG, 1.5 mm × 1.5 mm
Brand Texas Instruments
Output Channels 5 channels
Supply Voltage Range 1.65 V to 3.6 V
Nominal Supply Voltage 2.3 V
Communication Interface Single-wire serial input
Timing Method Self-timed with Setup phase
Operating Temperature Range -40°C to +85°C
Terminal Pitch 0.5 mm

أبرز الفروقات

  • Five outputs from one serial data connection (مقابلTCA9517)
  • Compact 8-pin RUG footprint (مقابلPCA9533)
  • Defined low-voltage operating range (مقابلNCP81074)
  • Extended operating temperature specification (مقابلTCA9536)

ملاحظات التصميم

Place the TCA5405RUGR close to the host controller and keep the single data trace short because the self-timed operation depends on a stable waveform. Route the connection away from high-current switching nodes and noisy digital returns. Confirm the land pattern against the official RUG package drawing, including the exposed-pad connection, before releasing artwork.

Generate the Setup phase and output sequence in firmware with enough timing margin for operation across the complete supply and temperature range. The master samples the bit period during Setup, so small timing errors can shift the interpretation of subsequent output activity. Validate the waveform with a scope at minimum, nominal, and maximum supply conditions rather than relying only on a typical operating point.

Do not classify a functional substitute as a drop-in replacement until its package, numbered pinout, supply range, logic levels, timing, and output characteristics have all been checked. The 1.5 mm × 1.5 mm 8-pin footprint is a useful starting filter, but matching the outline alone does not guarantee interchangeability. Review the manufacturer datasheet for both devices before modifying an existing PCB.

Design the 1.65 V to 3.6 V supply rail to remain within the TCA5405RUGR operating limits under battery variation, transient conditions, and temperature changes. Provide local supply decoupling according to the manufacturer recommendations and keep return-current paths short. Evaluate every attached output at its maximum voltage and load so that supply droop does not compromise communication timing.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No specific compliance declarations were identified in the manufacturer page or other product information for this MPN.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

TCA5405RUGR datasheet TCA5405RUGR datasheet pdf TCA5405RUGR pinout TCA5405RUGR footprint TCA5405RUGR equivalent TCA5405RUGR replacement TCA5405RUGR cross reference TCA5405 single wire output expander TCA5405 portable application circuit Texas Instruments TCA5405 TCA5405 vs TCA9536 TCA5405RUGR price TCA5405RUGR stock TCA5405RUGR RUG package

المكونات والمصطلحات ذات الصلة

Texas Instruments TCA5405RUGR TCA5405 TCA9517 TCA9536 NCP81074 PCA9533 L9930 BTS50030 single-wire output expander I/O expander interface IC semiconductor self-timed serial protocol Setup phase internal clock single-wire input output channel VCC X2QFN RUG package QFN family surface mount portable applications low-voltage interface
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر