TCA5405RUGR - 5-Bit 1-Wire I/O Expander | Texas Instruments
MPN: TCA5405RUGR ✓ פעילTCA5405RUGR סקירה
An output expander is an interface IC that increases the number of controllable outputs available from a microcontroller or other host device. The TCA5405 belongs to the I/O expander hierarchy, where a serial data input causes a group of output channels to change state according to a timing-controlled protocol. Unlike a conventional parallel GPIO port, this device uses a self-timed serial protocol synchronized to an internal clock, reducing the number of host interface signals required.
The primary features of the TCA5405RUGR include five output channels, a wide 1.65 V to 3.6 V VCC operating range, a single-wire input, and a self-timed serial data protocol. Its 0.5 mm terminal pitch and 1.5 mm × 1.5 mm body support compact PCB layouts. The manufacturer specifies an operating temperature range of -40°C to +85°C, making the device suitable for industrial and extended-temperature portable applications when the surrounding system meets its electrical and mechanical requirements.
In operation, the master device establishes the bit period during a Setup phase. The TCA5405 then uses that timing information to control the five outputs without requiring a separate clock line. This self-timed architecture simplifies connections in space-constrained systems, although the host firmware must generate the required waveform accurately. The protocol timing, output behavior, and electrical limits should be implemented according to the timing diagrams in the Texas Instruments manufacturer datasheet.
Typical applications include portable media players, cellular phones, personal digital assistants, and other low-voltage systems in which a host controller needs extra discrete outputs. The device can expand an output-limited controller, support controlled indicators or peripheral signaling, and reduce the pin count required from the host integrated circuit. Its small RUG package is particularly useful when component area and routing density are more important than a large through-hole footprint.
A key design consideration is the relationship between supply voltage, output behavior, and the master-generated timing waveform. Keep the single data trace short, provide a stable supply, and validate the Setup and output timing over the full operating-temperature range. Do not assume that a cross-reference device with a similar function is pin-to-pin compatible; confirm package geometry, pin assignment, supply range, and protocol timing before making a replacement.
This product summary organizes the TCA5405RUGR function, voltage limits, package details, replacement constraints, comparison points, and application guidance into one engineering reference. It emphasizes the information needed to assess footprint reuse, interface timing, low-voltage operation, and the distinction between a functional substitute and a true drop-in replacement.
חלופות תחליף ישיר עבור TCA5405RUGR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותTCA5405RUGR מפרטים
| Product Type | 5-bit single-wire output expander |
| Number of Output Channels | 5 channels |
| Supply Voltage Range | 1.65 V to 3.6 V |
| Nominal Supply Voltage | 2.3 V |
| Communication Interface | 1-wire serial input |
| Serial Protocol | Self-timed |
| Internal Clock | 1 internal clock |
| Setup Phase | 1 setup phase for bit-period sampling |
| Package Type | X2QFN RUG, 8 pins |
| Package Body Dimensions | 1.5 mm × 1.5 mm |
| Terminal Pitch | 0.5 mm |
| טווח טמפרטורת פעולה | -40°C to +85°C |
| סוג הרכבה | Surface mount |
| Number of Terminals | 8 terminals |
| Primary Application | Portable low-voltage systems |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
מדריך תצורת פינים של TCA5405RUGR 1.5 mm × 1.5 mm
תצורת פינים עבור TCA5405RUGR (מארזת 1.5 mm × 1.5 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור TCA5405RUGR.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TCA5405RUGR מתאים עבור 6 יישוםs: Portable Media Player Controls, Cell Phone Peripheral Signaling, Low-Voltage Sensor Interface Control, Personal Digital Assistant Expansion, Battery-Powered IoT Module, Portable Accessory Control.
Portable Media Player Controls
The TCA5405RUGR fits portable media players that need additional controlled outputs from a pin-constrained host controller. Its five output channels and single serial data input allow a system to add peripheral-control functions without allocating a full parallel GPIO port. The 1.65 V to 3.6 V operating range aligns with low-voltage portable rails, while the 1.5 mm × 1.5 mm X2QFN package reduces board area. The host firmware must reproduce the Setup phase and subsequent timing defined by the Texas Instruments manufacturer datasheet, particularly when the battery voltage varies during operation.
מומלץ
Cell Phone Peripheral Signaling
The TCA5405RUGR can extend control signaling in a cell phone or similar handheld product where the application processor has limited available output pins. Five separately addressed outputs are available through the self-timed single-wire interface, making the device suitable for peripheral enables, status functions, or other discrete controls. Its 2.3 V nominal operating point and 1.65 V to 3.6 V supply range suit low-voltage portable architectures. Compact placement in the 8-pin RUG package preserves routing space, but the complete waveform must remain within the timing and electrical limits in the manufacturer datasheet.
מומלץ
Low-Voltage Sensor Interface Control
The TCA5405RUGR can provide auxiliary control outputs in a compact sensor module powered from a low-voltage rail. A host microcontroller can use the single-wire interface to operate five peripheral-control lines instead of dedicating multiple GPIO pins to the same function. The 1.65 V to 3.6 V operating range supports low-energy sensor systems, while the compact 1.5 mm × 1.5 mm package helps preserve space in wearable and IoT-style assemblies. Validate signal timing at the module’s minimum supply voltage and ensure the master waveform meets the Setup requirements described by Texas Instruments.
מומלץ
Personal Digital Assistant Expansion
The TCA5405RUGR is suited to personal digital assistant and feature-phone designs where compact auxiliary output control is needed. Five outputs are managed through one self-timed serial input, helping the host avoid a wider parallel interface and reducing PCB routing requirements. The device’s 8-pin RUG package and 0.5 mm pitch support fine-pitch assembly, while its low-voltage operation is appropriate for portable system rails. Firmware and hardware should use the manufacturer’s Setup and timing diagrams, and outputs must remain within their specified load and voltage conditions.
מומלץ
Battery-Powered IoT Module
A battery-powered IoT module can use the TCA5405RUGR to add five controllable outputs while preserving the host controller’s limited pin budget. The interface uses one data line and relies on a master-generated timing sequence, making it appropriate for compact equipment whose enclosure and connector space are constrained. Its 1.65 V to 3.6 V range supports low-voltage power architecture, and the -40°C to +85°C specification covers many extended-temperature deployments. Designers should test operation across battery discharge conditions and verify that the serial timing remains reliable at the lowest usable supply voltage.
מומלץ
Portable Accessory Control
The TCA5405RUGR can expand control of accessories connected to a portable electronic system. Five outputs allow a host to manage enables, indicators, mode controls, or other discrete peripheral functions through a single serial input. The compact X2QFN RUG package is useful where connector placement and component density limit the available PCB area. Its low-voltage operation is compatible with portable rails from 1.65 V to 3.6 V, but the accessory loads, logic levels, and timing must be checked independently. Use the manufacturer datasheet to establish the required host sequence and output conditions.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור TCA5405RUGR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Package | 8-pin X2QFN RUG, 1.5 mm × 1.5 mm |
| Brand | Texas Instruments |
| Output Channels | 5 channels |
| Supply Voltage Range | 1.65 V to 3.6 V |
| Nominal Supply Voltage | 2.3 V |
| Communication Interface | Single-wire serial input |
| Timing Method | Self-timed with Setup phase |
| Operating Temperature Range | -40°C to +85°C |
| Terminal Pitch | 0.5 mm |
מבדילים עיקריים
- Five outputs from one serial data connection (לעומתTCA9517)
- Compact 8-pin RUG footprint (לעומתPCA9533)
- Defined low-voltage operating range (לעומתNCP81074)
- Extended operating temperature specification (לעומתTCA9536)
הערות תכנון
Place the TCA5405RUGR close to the host controller and keep the single data trace short because the self-timed operation depends on a stable waveform. Route the connection away from high-current switching nodes and noisy digital returns. Confirm the land pattern against the official RUG package drawing, including the exposed-pad connection, before releasing artwork.
Generate the Setup phase and output sequence in firmware with enough timing margin for operation across the complete supply and temperature range. The master samples the bit period during Setup, so small timing errors can shift the interpretation of subsequent output activity. Validate the waveform with a scope at minimum, nominal, and maximum supply conditions rather than relying only on a typical operating point.
Do not classify a functional substitute as a drop-in replacement until its package, numbered pinout, supply range, logic levels, timing, and output characteristics have all been checked. The 1.5 mm × 1.5 mm 8-pin footprint is a useful starting filter, but matching the outline alone does not guarantee interchangeability. Review the manufacturer datasheet for both devices before modifying an existing PCB.
Design the 1.65 V to 3.6 V supply rail to remain within the TCA5405RUGR operating limits under battery variation, transient conditions, and temperature changes. Provide local supply decoupling according to the manufacturer recommendations and keep return-current paths short. Evaluate every attached output at its maximum voltage and load so that supply droop does not compromise communication timing.
מידע על תאימות
No specific compliance declarations were identified in the manufacturer page or other product information for this MPN.