Texas Instruments

TCAN337DCNR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

MPN: TCAN337DCNR ✓ نشط
3.3 V Vdss SOT-23-8 (DCN) Package
الحد الأدنى للطلب: 1 |

TCAN337DCNR نظرة عامة

The Texas Instruments TCAN337DCNR is a 3.3 V CANbus half-duplex transceiver with one transmitter driver and one receiver, a maximum data rate of 1 Mbps, and a 3 V to 3.6 V supply range. The device is packaged in an 8-pin SOT-23-8 DCN package for space-constrained industrial, automotive, and embedded systems.

A CAN transceiver is an interface IC that connects a host controller's digital logic to a Controller Area Network physical layer. The transmitter converts logic-level signals into a dominant or recessive bus state, while the receiver converts bus states back into logic-level signals. Together, these functions form part of the broader CAN interface hierarchy: CAN controller, CAN transceiver, CAN bus, and connected electronic control units.

The TCAN337DCNR operates from a 3.3 V supply and supports CAN data rates up to 1 Mbps. Its one-driver, one-receiver arrangement supports half-duplex CAN communication, while the SOT-23-8 package minimizes board area. The family also includes ultra-low-power shutdown and standby modes, making it suitable for battery-powered equipment that periodically enters a reduced-power state. The specified operating-temperature range extends from -40 °C to 125 °C.

The TCAN337 family is associated with the ISO 11898 High-Speed CAN physical-layer standard. Its low-voltage supply operation and small footprint make it suitable for CAN nodes built around 3.3 V microcontrollers, where larger SOIC packages would consume unnecessary board space. A designer should still validate the complete bus network, including cable length, termination, node count, transceiver timing, and controller compatibility.

Typical uses include industrial automation equipment, automotive body and comfort modules, battery-powered sensors, building-control gateways, and compact CAN-to-serial or CAN-to-Ethernet gateways. The device is particularly useful where a controller operates from 3.3 V and board area is more constrained than thermal dissipation.

For a new design, follow the manufacturer's recommended bus and decoupling connections, place the device close to the CAN connector and protection network, and verify the transceiver's mode-control logic against the system power sequence. The TCAN337DCNR is identified as active by Texas Instruments.

This page organizes the confirmed electrical, package, application, and lifecycle information into an engineering-focused selection guide. It also distinguishes directly comparable same-family devices from options that would require changes to the PCB footprint or CAN network configuration.

بدائل مباشرة لـ TCAN337DCNR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع TCAN337DCNR (نفس عامل الشكل والبصمة) — يختلف في Operating Temperature Range, Product Type, Package, Maximum CAN Data Rate, Pin Count.

Texas Instruments
Operating Temperature Range: -40°C to +125°C
Product Type: 1/1 CAN bus transceiver
Package: 8-pin SOT-23 (DCN)
قارن مع TCAN337DCNR →
Texas Instruments
Operating Temperature Range: -40 C to +125 C
Product Type: CAN Transceiver (CAN FD, High-Speed)
Pin Count: 8
قارن مع TCAN337DCNR →
Texas Instruments
Operating Temperature Range: -40°C to 125°C
Product Type: 3.3 V CAN FD transceiver
Package: 8-pin SOT-23 (DCN)
قارن مع TCAN337DCNR →

TCAN330DCNR

✅ بديل مباشر
Texas Instruments
📦 SOT-23-8 (DCN)
1/1 CAN bus transceiver · 3V to 3.6V · 1Mbps · 1 · 1 · 20uA · 60mA · -40°C to +125°C

تواصل لمعرفة السعر

عرض ورقة البيانات ←

TCAN332DCNR

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Texas Instruments
📦 SOT-23-8 (DCN)
CAN FD transceiver · 3.0 V to 3.63 V · 3.3 V · 1 Mbps · CAN and CAN FD · 1 channel · -2 V to 7 V · -40°C to +125°C

تواصل لمعرفة السعر

عرض ورقة البيانات ←

TCAN334DCNT

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Texas Instruments
📦 SOT-23-8 (DCN)
3.3 V CAN FD transceiver · 3 V to 3.6 V · 1 Mbps · Supported · 1/1 half duplex · 8-pin SOT-23 (DCN) · 8 pins · -40°C to 125°C

تواصل لمعرفة السعر

عرض ورقة البيانات ←

TCAN337DCNR المواصفات

Product Type CANbus transceiver
جهد التغذية 3.3 V
Operating Supply Voltage Range 3 V to 3.6 V
Maximum CAN Data Rate 1 Mbps
Number of Drivers 1
Number of Receivers 1
Duplex Type Half-duplex
Receiver Hysteresis 120 mV
CAN Protocol CANbus
Physical-Layer Standard ISO 11898 High-Speed CAN
نطاق درجة حرارة التشغيل -40 °C to 125 °C
العلبة SOT-23-8 (DCN)
عدد الدبابيس 8 pins
نوع التركيب Surface mount
Power States Shutdown and standby modes
Product Status Active

دليل تكوين أطراف TCAN337DCNR sot-23-8 (dcn)

تكوين الأطراف لـ TCAN337DCNR (حزمة sot-23-8 (dcn)). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة sot-23-8 (dcn) لـ TCAN337DCNR

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TCAN337DCNR.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

TCAN337DCNR مناسب لـ 6 التطبيقs: 3.3V Industrial CAN Sensor Node, Automotive Body Control Module, Battery-Powered CAN Gateway, Building Control and HVAC Interface, CAN-to-Ethernet Communication Module, Compact CAN-to-Serial Adapter.

🏭

3.3V Industrial CAN Sensor Node

The TCAN337DCNR fits compact industrial sensor nodes that communicate over a 3.3 V CANbus. Its 3 V to 3.6 V operating range aligns with common 3.3 V embedded controllers, while the one-driver, one-receiver transceiver provides the required physical-layer interface at rates up to 1 Mbps. The 8-pin SOT-23-8 package conserves board area in distributed instrumentation. Place the transceiver near the connector and its protection components, and validate timing for the longest cable and highest node count in the network.

🚗

Automotive Body Control Module

The TCAN337DCNR is suitable for low-voltage CAN links in compact automotive body, comfort, and sensor-control modules. Its specified -40 °C to 125 °C operating range covers harsh-temperature environments, and the 3.3 V supply supports integration with 3.3 V logic. The SOT-23-8 footprint allows placement near board connectors while leaving more PCB area for protection and routing. Automotive qualification status must be confirmed for the exact ordered device before production release.

⚡

Battery-Powered CAN Gateway

The TCAN337DCNR works well in a battery-powered gateway where the CAN interface must coexist with a low-voltage embedded controller. Its 3.3 V operating range and TCAN337-family shutdown and standby modes support power-conscious system designs, while the 1 Mbps capability handles normal CANbus traffic. The small SOT-23-8 package is valuable in portable equipment. Define mode-control defaults so the bus transmitter is disabled during low-power states, and use the manufacturer's test conditions when calculating standby current.

🏭

Building Control and HVAC Interface

The TCAN337DCNR can serve as the CAN physical-layer device in compact building-control, HVAC, or facilities-management equipment. Its 1 Mbps data rate is appropriate for conventional CAN networks, and the 120 mV receiver hysteresis supports dependable interpretation of bus levels. The SOT-23-8 package helps reduce controller-board size. For industrial deployment, check the complete operating-temperature requirement, select termination and protection for the cable environment, and verify controller timing at the longest planned bus length.

🌐

CAN-to-Ethernet Communication Module

The TCAN337DCNR is appropriate for a CAN-to-Ethernet bridge that converts messages between a CAN network and a higher-level communications processor. The transceiver handles the physical CAN layer while the bridge controller manages protocol conversion and data routing. Its 3.3 V operation, 1 Mbps rate, and small SOT-23-8 footprint support compact embedded networking equipment. Place the transceiver near the CAN connector, provide the specified bus protection, and keep Ethernet and CAN return-current paths arranged to minimize coupling.

🔧

Compact CAN-to-Serial Adapter

The TCAN337DCNR is a practical choice for a compact CAN-to-serial adapter connecting legacy serial equipment to a modern CAN network. Its one-driver, one-receiver arrangement and 1 Mbps capability support ordinary CANbus communication, while the 8-pin SOT-23-8 package minimizes the adapter footprint. The 3.3 V supply requirement must match the adapter's logic rail. Use level-compatible serial components, provide accessible bus termination, and confirm that the selected controller supports the bus timing and identifiers used by the network.

What is the TCAN337DCNR?
The TCAN337DCNR is a Texas Instruments 3.3 V CANbus transceiver with one driver, one receiver, and support for data rates up to 1 Mbps. It is packaged in an 8-pin SOT-23-8 DCN package. According to the TCAN337 manufacturer product page, the device is intended for 3.3 V systems and is compatible with the ISO 11898 High-Speed CAN physical-layer standard.
What is the operating voltage of TCAN337DCNR?
The TCAN337DCNR operates from 3 V to 3.6 V, making it suitable for 3.3 V embedded systems. The Texas Instruments TCAN337 product page identifies the family as a 3.3 V CAN transceiver, while the distributor technical listing confirms the 3 V minimum and 3.6 V maximum supply range. The host controller and interface circuitry should use compatible 3.3 V logic levels.
What is the maximum data rate of TCAN337DCNR?
The TCAN337DCNR supports CAN communication at up to 1 Mbps. The TCAN337 family is described by Texas Instruments as compatible with the ISO 11898 High-Speed CAN physical layer, and the product listing identifies a 1 Mbps maximum rate. Actual bus performance also depends on cable length, termination, controller timing, electromagnetic conditions, and the number of communicating nodes.
Where can I download the TCAN337DCNR datasheet PDF?
The official TCAN337 datasheet and technical documentation are accessible through the Texas Instruments product page at https://www.ti.com/product/TCAN337. The ordered-device page for TCAN337DCNR is at https://www.ti.com/product/TCAN337/part-details/TCAN337DCNR. Use those documents for the exact pin description, electrical characteristics, application circuit, and ordering information.
Where can I find the TCAN337DCNR pinout?
The TCAN337DCNR pinout is published in the Texas Instruments TCAN337 manufacturer documentation, including the device pin-configuration and application diagrams. The device uses the 8-pin SOT-23-8 DCN package. Use the DCN package drawing and the TCAN337 pin-description table when assigning CANH, CANL, supply, ground, mode-control, and transceiver-control connections.
Can TCAN337DCNR be used with a 3.3V CAN controller?
Yes, the TCAN337DCNR is designed for 3.3 V systems and can interface with a compatible 3.3 V CAN controller. Its supply range is 3 V to 3.6 V, and the transceiver provides the physical-layer driver and receiver required between the controller's logic interface and the CAN bus. Verify signal levels, mode-control polarity, timing, and bus parameters against the controller datasheet.
What is the difference between TCAN337DCNR and TCAN330DCNR?
Both devices belong to the Texas Instruments TCAN33x family, support CAN rates up to 1 Mbps, and use the 8-pin SOT-23-8 DCN package, but their internal feature sets are not identical. The TCAN337 includes the family features associated with standby and shutdown operation, while TCAN330 is a distinct family member. Confirm mode-control behavior and bus timing in the manufacturer datasheets before substitution.
TCAN337DCNR vs TCAN334DCNT - which should I choose?
TCAN337DCNR is the preferred choice when the design specifically requires the TCAN337 feature set, including its low-power operating modes and 3.3 V CAN operation. TCAN334DCNT is a same-manufacturer, same-package alternative in the TCAN33x family. Both support rates up to 1 Mbps and use an 8-pin SOT-23 footprint, but shutdown, standby, and other control behavior must be checked before replacement.
When should I choose TCAN337DCNR over TCAN330DCNR?
Choose TCAN337DCNR when low-power shutdown and standby behavior from the TCAN337 family is important for a 3.3 V, space-constrained design. Choose TCAN330DCNR when its defined operating modes and electrical characteristics better match the system. Both provide a one-driver, one-receiver CAN interface in an 8-pin SOT-23-8 package and support up to 1 Mbps.
When should I choose TCAN337DCNR over TCAN334DCNT?
Choose TCAN337DCNR when the exact TCAN337 mode-control and low-power behavior is required by the product architecture. Choose TCAN334DCNT when its TCAN334 characteristics satisfy the timing, supply, and power-state requirements of the CAN node. Both are surface-mount, 8-pin SOT-23 devices, but a footprint match alone does not replace functional verification.
What is the best drop-in replacement for TCAN337DCNR?
TCAN330DCNR is the closest same-brand SOT-23-8 alternative identified for the TCAN337DCNR, while TCAN334DCNT and TCAN332DCNR provide additional same-family package matches. These devices should be treated as engineering alternatives rather than automatic replacements because their mode-control and low-power characteristics can differ. Validate the complete CAN interface against the manufacturer application circuit.
Can TCAN330DCNR replace TCAN337DCNR on the same PCB?
TCAN330DCNR uses the same 8-pin SOT-23-8 DCN package and supports the same 1 Mbps CAN data-rate class, so it can serve as a PCB-level alternative. However, the devices have different family-specific operating modes, and the replacement is valid only after checking enable, standby, shutdown, bus timing, and electrical limits. Software and power-sequencing changes may also be required.
What can replace TCAN337DCNR?
The confirmed same-footprint options are TCAN330DCNR, TCAN332DCNR, and TCAN334DCNT, all from the Texas Instruments TCAN33x family and all listed in an 8-pin SOT-23 format. No verified cross-brand drop-in equivalent was established. Before replacing the target, compare mode-control polarity, supply behavior, standby and shutdown functions, propagation timing, and bus fault handling.
Is there a Texas Instruments equivalent for TCAN337DCNR?
Texas Instruments offers several closely related TCAN33x devices, including TCAN330DCNR, TCAN332DCNR, and TCAN334DCNT. They share the manufacturer's SOT-23-8 family footprint and are relevant for a drop-in PCB assessment. The TCAN337DCNR itself is the exact choice when its defined TCAN337 low-power and mode-control behavior is required by the design.
Where to buy TCAN337DCNR online and what is its price?
Use the Request a Quote form on this page to request TCAN337DCNR pricing, current availability, and lead time. Texas Instruments identifies the device as active and lists the DCN package with eight pins. A current commercial quotation should also confirm the required cut-tape or reel packaging, production quantity, and delivery destination before the order is placed.
What are the key specifications of TCAN337DCNR that engineers should know?
The essential TCAN337DCNR specifications are a 3 V to 3.6 V supply, operation up to 1 Mbps, one driver, one receiver, half-duplex CANbus operation, 120 mV receiver hysteresis, and an operating range of -40 °C to 125 °C. The device uses an 8-pin SOT-23-8 DCN package. These characteristics position it for compact, low-voltage CAN nodes with wide-temperature industrial requirements.

بيانات مرجعية هندسية لـ TCAN337DCNR — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose TCAN337DCNR for a compact 3.3 V CAN node that needs the defined TCAN337 shutdown and standby behavior, an operating range of -40 °C to 125 °C, and support for communication rates up to 1 Mbps. Its 8-pin SOT-23-8 package is particularly useful in space-constrained industrial, automotive, and battery-powered equipment. TCAN330DCNR is a practical same-footprint alternative when its mode-control behavior better matches the product and shutdown or standby timing is not required. TCAN332DCNR offers another same-package family option for comparing operating modes and power behavior. TCAN334DCNT is suitable when its exact electrical and mode-control characteristics satisfy the design. For every substitution, verify supply limits, mode-control polarity, propagation timing, fault handling, bus protection, and controller compatibility. No cross-brand drop-in option is recommended without a manufacturer-supported pin and timing comparison.

المقارنة مع البدائل

المعامل هذا المنتج TCAN330DCNR TCAN332DCNR TCAN334DCNT
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SOT-23-8 (DCN) SOT-23-8 (DCN) SOT-23-8 (DCN) SOT-23-8 (DCN)
Product Type 3.3 V CANbus transceiver CANbus transceiver CANbus transceiver CANbus transceiver
Maximum Data Rate 1 Mbps 1 Mbps 1 Mbps 1 Mbps
Number of Drivers/Receivers 1/1 1/1 1/1 1/1
Physical-Layer Standard ISO 11898 High-Speed CAN ISO 11898 High-Speed CAN ISO 11898 High-Speed CAN ISO 11898 High-Speed CAN

أبرز الفروقات

  • Compact 3.3 V CAN interface in an 8-pin SOT-23 package (مقابلTCAN330DCNR)
  • Wide specified operating-temperature range (مقابلTCAN334DCNT)
  • 3.3 V supply operation with 1 Mbps performance (مقابلTCAN332DCNR)

ملاحظات التصميم

Place the TCAN337DCNR close to the CAN connector, termination network, and transient-voltage protection components. Keep the CANH and CANL route symmetrical where practical and avoid long unprotected traces. Route the transceiver ground return directly to the ground plane, and maintain a continuous return path beneath the bus pair. This placement reduces radiated emissions and susceptibility to differences between the transceiver and connector ground currents.

Tie the transceiver supply pins to a clean 3.3 V rail and place the manufacturer-recommended bypass capacitor immediately beside the device. Do not route bus return current through the logic supply ground path. In standby or shutdown designs, define mode-control defaults so the transmitter cannot unintentionally dominate the bus during startup, reset, or low-battery operation.

Separate CAN routing from clocks, high-speed serial links, switching-node power stages, and other likely noise sources. Avoid placing test pads or long stubs on CANH or CANL unless their effects have been evaluated. Keep the termination capacitor close to the connector rather than at the transceiver, and follow the bus topology and termination scheme specified for the number of active nodes.

A matching SOT-23-8 footprint does not by itself prove that another TCAN33x device is a functional replacement. Check mode-control polarity, shutdown and standby behavior, bus-fault response, propagation timing, supply limits, and controller compatibility. When substituting a part, review its manufacturer application circuit and update firmware or board-control logic wherever the operating modes differ.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer identifies TCAN337DCNR as active. Exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status must be confirmed for the ordered device.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

TCAN337DCNR datasheet TCAN337DCNR pinout TCAN337DCNR datasheet pdf TCAN337DCNR equivalent TCAN337DCNR replacement TCAN337DCNR cross reference TCAN337DCNR footprint TCAN337DCNR schematic TCAN337DCNR application circuit TCAN337DCNR vs TCAN330DCNR TCAN337DCNR price TCAN337DCNR stock Texas Instruments TCAN337DCNR TCAN337 SOT-23-8 pinout

المكونات والمصطلحات ذات الصلة

Texas Instruments TCAN337DCNR TCAN330DCNR TCAN332DCNR TCAN334DCNT CAN transceiver CANbus Controller Area Network ISO 11898 High-Speed CAN CAN physical layer CAN controller half-duplex transceiver 3.3 V transceiver 1 Mbps CAN SOT-23-8 DCN package surface-mount package receiver hysteresis shutdown mode standby mode industrial automation automotive electronics battery-powered CAN gateway building control CAN-to-Ethernet gateway
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر