إشعار الشراء الأخير: TJA1021T/10/CM يقترب من نهاية العمر الإنتاجي. آخر موعد للطلب: تواصل معنا. عرض القطع البديلة المتاحة →
NXP Semiconductors

TJA1021T/10/CM - 20 kbps LIN Bus Transceiver | NXP

MPN: TJA1021T/10/CM ✗ انتهى عمره الإنتاجي
5.5 V to 27 V Vdss 10 uA Id 8-pin SOIC, 3.90 mm width Package
الحد الأدنى للطلب: 1 |

TJA1021T/10/CM نظرة عامة

NXP Semiconductors TJA1021T/10/CM is an automotive LIN bus transceiver with an integrated voltage regulator, 20 kbps maximum signaling rate, and an 8-pin SOIC package. The device supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016 communication while providing local wake-up, bus wake-up, low-power mode, and thermal shutdown protection.

A LIN transceiver, also called a LIN physical-layer interface, is the semiconductor bridge between a microcontroller-based LIN protocol controller and the physical LIN wiring harness. It belongs to the interface IC hierarchy, connecting automotive and industrial network controllers to a low-cost, single-wire communications bus. Unlike a logic-level serial transceiver, the TJA1021 includes the physical bus driver, receiver, voltage regulator, waveform shaping, and fault-recovery functions required by LIN nodes.

The TJA1021T/10/CM operates from 5.5 V to 27 V, supports bus rates from 1 kBd to 20 kBd, and has a bus output current of 4 mA. Its 10 uA low-power specification supports energy-conscious node implementations. The optimized slew rate and wave shaping minimize electromagnetic emissions, while enhanced ESD protection of ±6 kV improves robustness in automotive environments exposed to ESD events on the bus wiring.

The integrated voltage regulator supplies the external transceiver circuitry, reducing the number of supporting components. Communication features include local and bus wake-up, TXD timeout protection, bus-fault protection, and thermal shutdown. According to the NXP manufacturer documentation, the TJA1021 is pin-compatible with the TJA1020 and MC33662(B), allowing those devices to be considered when an existing board uses the same SOIC-8 footprint.

Typical uses include LIN master nodes in vehicle body controllers, door and seat modules, climate-control interfaces, ambient-light sensors, switch panels, and industrial supervisory controllers. The 20 kBd ceiling supports the highest baud rates specified by the cited LIN and SAE J2602 protocols, while local and bus wake-up provide practical options for low-current systems.

PCB layout should preserve the transceiver layout specified in the manufacturer datasheet, keep the LIN connection away from sensitive analog and high-speed digital traces, and provide a low-impedance return path to the ground plane. Verify the exact pin orientation, exposed connections, external resistor and capacitor requirements, and transceiver-state behavior against the current NXP datasheet before releasing a new layout.

This page organizes the manufacturer specifications, protocol coverage, lifecycle information, drop-in cross-references, application guidance, and design considerations needed to evaluate the TJA1021T/10/CM for an existing LIN node design.

بدائل مباشرة لـ TJA1021T/10/CM — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع TJA1021T/10/CM (نفس عامل الشكل والبصمة) — يختلف في Product Type, Package, ESD Protection, Package Type.

NXP Semiconductors
Product Type: LIN Bus Physical-Layer Transceiver
Package Type: SOIC-8
NXP Semiconductors
Package: 8-pin SO package
Package Type: SOIC-8 surface-mount package
NXP Semiconductors
Product Type: LIN Transceiver (single-wire bus PHY)
Package: 8-SO (SOIC-8) SMD
ESD Protection: HBM exceeds LIN spec (improved vs TJA1020)

TJA1020T/N1

✅ بديل مباشر
NXP Semiconductors
📦 8-pin SOIC
LIN bus transceiver · LINbus serial interface · Half LINbus transceiver · NXP Semiconductors · 8-pin SO package · SOIC-8 surface-mount package · 8 pins · End of Life

تواصل لمعرفة السعر

عرض ورقة البيانات ←

TJA1021T/20/C

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
NXP Semiconductors
📦 8-pin SOIC
LIN Transceiver (single-wire bus PHY) · LIN 2.0 / 2.1 / 2.2 / 2.2A / SAE J2602 / ISO 17987-4:2016 · 20 kBd (/20 variant) · 1 kBd · 3.0 V to 5.5 V (typical 5 V) · 5 V to 27 V (extended -27 V to +40 V with load dump) · 1 (half-duplex LIN bus + TXD/RXD logic) · 8-SO (SOIC-8) SMD

تواصل لمعرفة السعر

عرض ورقة البيانات ←

TJA1021BT

✅ بديل مباشر
📦 8-pin SOIC
NXP identifies TJA1021BT as pin-to-pin and hardware/software compatible with TJA1021T/20; the TJA1021T/10 qualification and protection details require confirmation.

📋 بديل مرجعي (غير موجود في الكتالوج)

MC33662JEF

✅ بديل مباشر
NXP Semiconductors
📦 8-pin SOIC
LIN Bus Physical-Layer Transceiver · 1 transmitter and 1 receiver · LINbus · 13.5 V · -40 °C · 125 °C · 8 pins · SOIC-8

تواصل لمعرفة السعر

عرض ورقة البيانات ←

TJA1021T/10/CM المواصفات

Product Type LIN bus transceiver
Maximum LIN Baud Rate 20 kBd
Supported LIN Baud Rate Range 1 kBd to 20 kBd
Supply Voltage Range 5.5 V to 27 V
Quiescent or Low-Power Current 10 uA
Bus Output Current 4 mA
ESD Protection ±6 kV
العلبة 8-pin SOIC, 3.90 mm width
نوع التركيب Surface mount
Supported LIN Versions LIN 2.0, LIN 2.1, LIN 2.2 and LIN 2.2A
Automotive Protocol Support SAE J2602
International Standard Support ISO 17987-4:2016
Protection Features Bus fault protection and thermal shutdown
Wake-Up Features Local wake-up and bus wake-up
Controller Interface Protection TXD timeout protection
Voltage Regulator Integrated
Pin Compatibility Compatible with TJA1020 and MC33662(B)
حالة RoHS Compliant

دليل تكوين أطراف TJA1021T/10/CM 8-pin soic, 3.90 mm width

تكوين الأطراف لـ TJA1021T/10/CM (حزمة 8-pin soic, 3.90 mm width). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 8-pin soic, 3.90 mm width لـ TJA1021T/10/CM

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TJA1021T/10/CM.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

TJA1021T/10/CM مناسب لـ 6 التطبيقs: Automotive LIN Master Node, Vehicle Door and Seat Module, Climate-Control Interface, Ambient and Accessory Sensor Node, Industrial LIN Controller Interface, Switch Panel and HMI Subnet.

🚗

Automotive LIN Master Node

The TJA1021T/10/CM fits a LIN master node that converts TXD commands from a protocol controller into standardized bus waveforms and returns bus state through RXD. Its 1 kBd to 20 kBd operating range covers the protocol families cited by the manufacturer, while optimized slew rate and wave shaping reduce electromagnetic emissions. The integrated voltage regulator and 4 mA bus output capability simplify the physical-layer section of a body, lighting, or climate-control controller. Designers should still verify the master timing, pull-up arrangement, and external component values against the NXP application circuit before layout release.

🚗

Vehicle Door and Seat Module

A door or seat module can use the TJA1021T/10/CM to communicate switch position, motor commands, and sensor status over a LIN subnet. The 5.5 V to 27 V operating range suits a node connected to an automotive supply environment, while local wake-up and bus wake-up support systems that must remain asleep until the user or remote node requests activity. Its ±6 kV ESD protection is useful on wiring that may be exposed to electrostatic discharge. Confirm the node's sleep-current budget, dominant-state behavior, and temperature qualification against the final vehicle electrical specification.

🏭

Climate-Control Interface

The TJA1021T/10/CM is appropriate for climate-control modules that exchange button, position, and sensor information over a low-cost single-wire network. Supporting LIN 2.0 through LIN 2.2A, SAE J2602, and ISO 17987-4:2016 gives the physical layer broad compatibility with established automotive network specifications. The device's integrated regulator reduces support circuitry, while its 20 kBd maximum rate provides margin within the specified LIN range. Layout should separate the LIN route from sensitive sensor lines and follow the manufacturer's grounding and bus-termination guidance.

🧩

Ambient and Accessory Sensor Node

An ambient-light, door-position, or accessory sensor node can use the TJA1021T/10/CM as its LIN physical-layer interface. The 10 uA low-power figure helps when the node spends extended periods in sleep, and local or bus wake-up provides two practical activation paths. At the maximum documented LIN rate of 20 kBd, the interface supports standard automotive network timing without a separate physical-layer transceiver. The system designer should account for the controller's sleep current, sensor standby demand, and the total node leakage when evaluating the advertised low-power characteristic.

🏭

Industrial LIN Controller Interface

The TJA1021T/10/CM can bridge an embedded controller to a LIN physical bus in an industrial subsystem using inexpensive wiring. Its 5.5 V to 27 V supply range, 20 kBd maximum communication rate, and bus-fault protection support robust point-to-point and multi-node arrangements. The device's standardized LIN behavior is valuable when interoperating with third-party controllers, while wake-up functions reduce the need for continuously active node electronics. For industrial deployment, verify immunity, operating temperature, grounding, cable length, and protection requirements for the installation environment.

🔧

Switch Panel and HMI Subnet

A switch panel, rotary controller, or human-machine interface can use the TJA1021T/10/CM to connect user commands to a LIN master. The standardized physical layer supports communication from 1 kBd to 20 kBd and includes local wake-up for activation at the panel. Integrated voltage regulation can simplify the transceiver supply arrangement, while TXD timeout protection helps the system respond safely when the host controller stops issuing valid transmit commands. The interface should be placed away from display switching and high-current actuator traces to minimize coupling into the LIN waveform.

ملخص المنتجات الموصى بها

TJA1020 Pin-compatible LIN transceiver option يُستخدم في: Automotive LIN Master Node, Vehicle Door and Seat Module, Ambient and Accessory Sensor Node, Switch Panel and HMI Subnet MC33662(B) Pin-compatible NXP transceiver option يُستخدم في: Automotive LIN Master Node, Climate-Control Interface, Industrial LIN Controller Interface TJA1021T/20 Same-family LIN transceiver option يُستخدم في: Vehicle Door and Seat Module, Ambient and Accessory Sensor Node, Switch Panel and HMI Subnet TJA1021BT Pin-compatible same-family transceiver option يُستخدم في: Climate-Control Interface, Industrial LIN Controller Interface
What is the TJA1021T/10/CM?
The TJA1021T/10/CM is an NXP Semiconductors LIN physical-layer transceiver that connects a LIN protocol controller to a LIN bus. It supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016, with a maximum baud rate of 20 kBd and an 8-pin SOIC package.
What are the key specifications of TJA1021T/10/CM that engineers should know?
The TJA1021T/10/CM operates from 5.5 V to 27 V and supports LIN communication from 1 kBd to 20 kBd. Its major features include an integrated voltage regulator, 10 uA low-power current, 4 mA bus output current, ±6 kV ESD protection, local and bus wake-up, TXD timeout protection, and thermal shutdown. The device is packaged in an 8-pin SOIC.
Where can I download the TJA1021T/10/CM datasheet PDF?
The official TJA1021T/10/CM datasheet is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1021.pdf. The manufacturer document contains the electrical characteristics, LIN operating requirements, timing information, application circuit, and pin descriptions. Use the NXP TJA1021 product page as the starting point for revision status and lifecycle notices.
Where can I find the TJA1021T/10/CM pinout?
The TJA1021T/10/CM uses an 8-pin SOIC footprint, and its complete pin-assignment table is published in the NXP TJA1021 manufacturer datasheet. The functional device includes a TXD controller input, RXD receiver output, supply and ground connections, and LIN bus and regulator connections. Confirm the exact numbering and exposed-pin requirements against the datasheet before assigning PCB tracks.
What is the operating voltage of TJA1021T/10/CM?
The TJA1021T/10/CM has a stated operating supply-voltage range of 5.5 V to 27 V. This range supports conventional automotive battery-derived systems while remaining compatible with lower-voltage LIN node electronics. The absolute maximum supply rating, transient limits, and precise operating derating conditions must be taken from the NXP manufacturer datasheet for final circuit qualification.
What LIN standards and baud rates does TJA1021T/10/CM support?
The TJA1021T/10/CM supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016. According to the NXP manufacturer documentation, supported signaling rates extend from 1 kBd to 20 kBd. These capabilities suit automotive and industrial LIN nodes requiring standardized physical-layer behavior and wake-up functions.
What can replace the TJA1021T/10/CM?
The NXP manufacturer documentation states that the TJA1021 is pin-compatible with the TJA1020 and MC33662(B). The TJA1021BT is also identified as a pin-to-pin and hardware/software-compatible replacement for the TJA1021T/20 in NXP technical support material. Each candidate must still be checked for supply range, ESD rating, wake-up behavior, and protocol requirements before substitution.
What is the best drop-in replacement for TJA1021T/10/CM?
The TJA1020 is the clearest documented drop-in choice because the NXP manufacturer documentation identifies it as pin-compatible with the TJA1021. MC33662(B) is also documented as pin-compatible. For the closest same-family replacement, TJA1021BT provides a pin-to-pin and hardware/software-compatible path for TJA1021T/20 designs, but its qualification for an existing TJA1021T/10/CM design requires project-specific review.
When should I choose TJA1021T/10/CM over TJA1020?
Choose the TJA1021T/10/CM when the design benefits from its 20 kBd capability, integrated voltage regulator, ±6 kV ESD protection, and local or bus wake-up functions. Choose the TJA1020 when it meets the complete electrical and lifecycle requirements of an existing node. The manufacturer identifies the devices as pin-compatible, so functional validation should cover bus timing and power-state behavior.
Is TJA1021T/10/CM suitable for automotive applications?
The TJA1021T/10/CM is designed for automotive LIN networks and includes bus-fault protection, thermal shutdown, TXD timeout protection, and ±6 kV ESD protection. The manufacturer documentation cites SAE J2602 and ISO 17987-4:2016 support. Confirm AEC-Q100 qualification, temperature range, and automotive quality status in the current NXP documentation for production release.
What is the difference between TJA1021T/10/CM and MC33662(B)?
Both devices are identified by NXP as pin-compatible with the TJA1021 family and therefore occupy the same 8-pin SOIC footprint. The TJA1021T/10/CM provides a documented 20 kBd maximum rate, integrated voltage regulator, wake-up functions, and ±6 kV ESD protection. MC33662(B) may differ in wake-up, regulator, protection, and lifecycle details, so review its datasheet before a production substitution.
Where can I buy TJA1021T/10/CM online?
Use the Request a Quote form on this page to request current availability, lot information, and commercial terms for the TJA1021T/10/CM. Because NXP identifies the TJA1021 product as end of life, request lifecycle confirmation, remaining inventory, and traceability documentation during quotation. Confirm the exact orderable suffix TJA1021T/10/CM when placing the request.
What is the price of TJA1021T/10/CM?
Current commercial pricing for the TJA1021T/10/CM is presented through the Request a Quote form on this page. The structured offer area should be used for the current response because end-of-life inventory and quantity requirements can materially affect allocation. Include the required quantity, delivery target, and packaging preference with the request.
What is the lead time and stock status of TJA1021T/10/CM?
Use the Request a Quote form on this page to request the current lead time, available quantity, and allocation status for TJA1021T/10/CM. Since the NXP product page identifies the TJA1021 as end of life, stock may be limited or constrained rather than replenished. Include your schedule and required traceability details so the response reflects the actual order configuration.
Is TJA1021T/10/CM in stock?
Current stock for TJA1021T/10/CM should be requested through the Request a Quote form on this page. The manufacturer identifies the product as end of life, so availability may depend on remaining factory or authorized-channel inventory rather than normal production replenishment. Specify quantity, date code requirements, and ship-to region when requesting the allocation.

بيانات مرجعية هندسية لـ TJA1021T/10/CM — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the TJA1021T/10/CM when an existing design needs a 20 kBd LIN physical layer, an integrated regulator, local and bus wake-up, and ±6 kV ESD protection in an 8-pin SOIC footprint. Select the TJA1020 for a pin-compatible NXP design that meets the legacy device's electrical requirements and has a preferable lifecycle position. Consider TJA1021BT when the manufacturer confirms that its pin-to-pin and hardware/software compatibility applies to the complete source configuration. MC33662(B) is a documented pin-compatible NXP option, but verify its regulator, wake-up, protection, timing, and lifecycle behavior. No unqualified cross-manufacturer replacement should be approved solely from matching package dimensions; all substitutes require bus-timing, sleep-current, fault-recovery, and automotive qualification checks.

المقارنة مع البدائل

المعامل هذا المنتج TJA1020 TJA1021T/20 TJA1021BT MC33662(B)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Documented Pin Compatibility Pin-compatible with TJA1020 and MC33662(B) Pin-compatible with TJA1021 Same TJA1021 family Pin-to-pin and hardware/software compatible with TJA1021T/20 Pin-compatible with TJA1021

أبرز الفروقات

  • Supports the full documented 20 kBd LIN operating range (مقابلTJA1020)
  • Provides both local and bus wake-up functions (مقابلMC33662(B))
  • Uses an ESD-protected LIN physical layer for vehicle wiring (مقابلTJA1021T/20)

ملاحظات التصميم

Place the TJA1021T/10/CM and its required external components according to the NXP application circuit. Keep the LIN connection away from switching-regulator nodes, display flex cables, and other high-edge-rate traces. Use a continuous ground reference beneath the device and avoid routing the bus through areas with switching-current loops. The optimized slew-rate circuitry reduces emissions, but layout symmetry and controlled return paths remain necessary for reliable waveform quality.

Provide a supply that remains within the specified 5.5 V to 27 V operating range across load transients, wiring losses, and automotive supply disturbances. Decouple the device close to its supply and ground pins, and use the regulator output only for the loads permitted by the manufacturer application circuit. Do not infer absolute-maximum or transient tolerances from the operating range; use the NXP manufacturer datasheet for those limits.

A same-footprint device is not automatically a functional substitute. Compare TXD polarity, dominant and recessive levels, RXD output behavior, regulator output, wake-up logic, timeout response, ESD rating, and LIN timing before replacing TJA1021T/10/CM. The TJA1020, TJA1021BT, and MC33662(B) each have documented compatibility attributes, but production qualification should include the complete node power states and bus timing tests.

Use the manufacturer's recommended LIN bus routing and termination arrangement to control waveform rise time and minimize radiated emissions. Keep external regulator and bus components close to their associated device pins, and avoid long stubs from the LIN trace. If the enclosure, cable, or neighboring harness produces difficult EMC results, verify that the complete reference design—not only the transceiver—is being compared, because cable impedance and node configuration strongly influence emissions.

معلومات الامتثال

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

RoHS compliance is identified for the exact TJA1021T/10/CM,118 order code. The listing identifies the device as an automotive LIN transceiver with AEC-Q100 status. REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified.

تم التحقق من البيانات في: 2026-11-18 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

tja1021t datasheet tja1021t lin transceiver tja1021t pinout TJA1021T/10/CM datasheet pdf TJA1021T/10/CM pinout TJA1021T/10/CM equivalent TJA1021T/10/CM replacement TJA1021T/10/CM vs TJA1020 TJA1021T/10/CM automotive LIN TJA1021T/10/CM 20 kBd TJA1021T/10/CM price TJA1021T/10/CM stock NXP TJA1021T/10/CM

المكونات والمصطلحات ذات الصلة

NXP Semiconductors TJA1021T/10/CM TJA1021 TJA1020 TJA1021T/20 TJA1021BT MC33662(B) LIN transceiver LIN physical-layer interface interface IC automotive network Local Interconnect Network LIN 2.1 SAE J2602 ISO 17987-4:2016 AEC-Q100 RoHS SOIC-8 surface-mount package 20 kBd local wake-up bus wake-up integrated voltage regulator TXD timeout protection bus fault protection
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر