Texas Instruments

TPA3007D1PW - 6.5W Mono Class-D Amplifier | Texas Instruments

MPN: TPA3007D1PW ✓ نشط
8 V to 18 V Vdss 24-pin TSSOP (PW) Package 20 kHz Speed
الحد الأدنى للطلب: 1 |

TPA3007D1PW نظرة عامة

Texas Instruments TPA3007D1PW is a 6.5 W mono Class-D audio power amplifier with an analog input, an 8 V to 18 V supply range, 36 dB gain, and a 20 kHz bandwidth specification. The device is offered in a 24-pin TSSOP (PW) package and is specified for operation from -40 °C to 85 °C. It drives an 8 Ω speaker through a bridge-tied load output while providing the efficiency associated with Class-D amplification.

A Class-D audio amplifier is a power-management IC that switches its output stage between active states instead of continuously dissipating a signal through a linear output transistor. The Class-D hierarchy—audio amplifier, power amplifier, amplifier IC, and semiconductor—places the TPA3007D1PW in portable and embedded audio systems where speaker output, supply efficiency, compactness, and analog-input compatibility are important.

The TPA3007D1 family provides a 6.5 W output rating, 8 V to 18 V analog supply operation, and a 36 dB gain setting. Its filter-free operation simplifies the signal path, while the 20 kHz specification corresponds to the audio bandwidth identified in the product documentation. The 24-pin TSSOP package allows a compact implementation but requires careful attention to thermal performance because acoustic output and switching losses are concentrated in a small package.

The amplifier uses a bridge-tied-load architecture, allowing the differential speaker outputs to develop the required voltage swing without a speaker-coupling capacitor. The manufacturer's documentation notes that an 8 Ω speaker can be driven with a ferrite-bead filter to reduce electromagnetic interference. Input and output filtering, supply bypassing, and return-current management remain essential even though the amplifier is described as filter-free.

Typical uses include compact Bluetooth speakers, portable audio products, sound-bar transducers, industrial annunciators, consumer audio modules, and other systems powered by an 8 V to 18 V source. The mono architecture suits a single-speaker enclosure, while the analog input allows connection to a DAC, audio codec, or another analog sound source.

For layouts, place the input, supply, and output filtering components close to their associated pins and maintain a compact power-loop area. Treat the exposed package area as a thermal and current path, provide adequate PCB copper, and verify speaker-load power and temperature rise in the final enclosure. The 8 V minimum supply requirement also makes this device less suitable than lower-voltage Class-D amplifiers for designs powered directly by a single-cell lithium battery.

This page combines the manufacturer's device specifications with application guidance, sourcing information, and an engineering comparison of orderable alternatives. The comparison focuses on package compatibility, electrical ratings, and the practical differences that matter when replacing or evaluating mono Class-D amplifier implementations.

بدائل مباشرة لـ TPA3007D1PW — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

TPA3007D1PWR

✅ بديل مباشر
📦 24-pin TSSOP (PW)
Same 6.5 W mono Class-D device and 24-pin TSSOP package; ordering suffix changes shipment configuration rather than electrical ratings

📋 بديل مرجعي (غير موجود في الكتالوج)

TPA3007D1PWG4

✅ بديل مباشر
📦 24-pin TSSOP (PW)
Same 6.5 W mono Class-D device and 24-pin TSSOP package; G4 ordering designation differs from PW and electrical performance is unchanged

📋 بديل مرجعي (غير موجود في الكتالوج)

TPA3007D1PWRG4

✅ بديل مباشر
📦 24-pin TSSOP (PW)
Same 6.5 W mono Class-D device and 24-pin TSSOP package; combined R and G4 ordering designations differ from PW with unchanged key ratings

📋 بديل مرجعي (غير موجود في الكتالوج)

TPA3007D1PW الحدود القصوى والخصائص الكهربائية

Product Type Mono Class-D audio power amplifier
Maximum Output Power 6.5 W
Supply Voltage Range 8 V to 18 V
Input Type Analog input
Number of Audio Channels 1 channel
Output Architecture Bridge-tied load (BTL)
Gain 36 dB
Frequency 20 kHz
Minimum Speaker Load 8 ohm
العلبة 24-pin TSSOP (PW)
Package Width 4.40 mm
نطاق درجة حرارة التشغيل -40 °C to 85 °C
نوع التركيب Surface mount
EMI Control Ferrite-bead filter recommended for the 8 ohm speaker output
Output Coupling No speaker-coupling capacitor required for the bridge-tied-load output

دليل تكوين أطراف TPA3007D1PW 4.40 mm

تكوين الأطراف لـ TPA3007D1PW (حزمة 4.40 mm). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 4.40 mm لـ TPA3007D1PW

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TPA3007D1PW.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

TPA3007D1PW مناسب لـ 6 التطبيقs: Portable Bluetooth Speaker, Compact Sound-Bar Speaker, Industrial Audible Alarm, Consumer Audio Module, Personal Audio Accessory, Test and Measurement Audio Fixture.

🔊

Portable Bluetooth Speaker

The TPA3007D1PW fits a compact powered speaker that uses an 8 V to 18 V internal rail and requires more output than a low-power integrated audio amplifier can provide. Its 6.5 W mono Class-D stage drives an 8 Ω speaker through a bridge-tied-load arrangement without a series output capacitor. The 24-pin TSSOP package also conserves board area compared with a larger power package. Design the power path around the 18 V maximum supply, provide local supply bypassing, and verify the speaker impedance under every operating condition. A ferrite-bead filter can be added to the speaker outputs if system-level testing reveals unacceptable electromagnetic interference.

📺

Compact Sound-Bar Speaker

The TPA3007D1PW is appropriate for a single-driver sound-bar module that receives analog audio from a codec or DAC and operates from an 8 V to 18 V power system. Its 6.5 W rating provides useful output for compact furniture while the Class-D topology limits dissipation compared with a linear amplifier. The bridge-tied-load outputs should be routed as a compact differential pair, and output filtering should be evaluated after the speaker cable and enclosure are installed. Keep analog input routing away from the switching outputs, and confirm that the shutdown and mode-control pins match the product-system requirements.

🏭

Industrial Audible Alarm

The TPA3007D1PW can drive an 8 Ω industrial alarm transducer from an 8 V to 18 V industrial audio rail while maintaining a compact amplifier footprint. The 6.5 W mono rating is useful where an audible notification must overcome enclosure losses, and the -40 °C to 85 °C operating range supports temperature-controlled equipment. Because Class-D output edges can interfere with sensitive analog or control circuitry, reserve continuous copper around the amplifier, keep switching-current paths compact, and validate emissions. The design must also include protection appropriate to the transducer and wiring environment.

🎧

Consumer Audio Module

The TPA3007D1PW suits a consumer module requiring a single high-efficiency speaker channel from an analog source. Its 6.5 W output, 36 dB gain, and 20 kHz bandwidth specification align with conventional full-range audio use, while the 24-pin TSSOP package supports compact board layouts. Place input-network components close to their pins, maintain a low-impedance ground return, and decouple the analog supply locally. Confirm the amplifier's mode and shutdown behavior in the system control logic, and conduct thermal testing at the maximum expected music or alarm output level rather than relying only on nominal signal conditions.

📱

Personal Audio Accessory

The TPA3007D1PW can serve as the speaker amplifier in a portable personal-audio accessory that includes a boost stage and operates at 8 V to 18 V. Compared with a 5 V-class amplifier, the device can deliver a 6.5 W mono output with a higher available supply, while its Class-D operation improves conversion efficiency. The accessory designer must account for boost-converter startup, speaker transients, and enclosure heat dissipation. Use a common or carefully isolated analog and power ground strategy, route the two speaker outputs as a matched pair, and verify operation across battery range and accessory-cable length.

🔧

Test and Measurement Audio Fixture

The TPA3007D1PW is usable in a compact audio test fixture that converts an analog source into a 6.5 W bridge-tied-load speaker drive. Its 8 V to 18 V supply range and 36 dB gain provide useful control for evaluating transducers without a large linear amplifier. A precision DAC can generate test signals, while short speaker wiring helps limit EMI and transmission-line effects. Add output filtering if required by the test specification, check channel polarity before measurements, and verify that the instrument enclosure can dissipate the worst-case output condition. The amplifier is a power stage and should not replace calibrated measurement front ends.

What is the TPA3007D1PW?
The TPA3007D1PW is a 6.5 W mono Class-D audio power amplifier with an analog input and an 8 V to 18 V supply range. According to the Texas Instruments product page, it is packaged in a 24-pin TSSOP and is intended for driving 8 Ω speakers through a bridge-tied-load output. Its Class-D topology improves amplifier efficiency while supporting compact portable-audio and embedded audio designs.
What are the key specifications of TPA3007D1PW that engineers should know?
The TPA3007D1PW combines a 6.5 W output rating, 8 V to 18 V supply, 36 dB gain, 20 kHz bandwidth specification, and 24-pin TSSOP package. Texas Instruments describes it as a mono analog-input Class-D amplifier with a bridge-tied-load output. The operating-temperature range is -40 °C to 85 °C, making it suitable for industrial and consumer equipment when the completed design satisfies its power and thermal limits.
What supply voltage does TPA3007D1PW require?
The TPA3007D1PW operates from 8 V to 18 V. According to the Texas Instruments product-page information, the analog supply range is suitable for higher-voltage portable systems and embedded audio products. It cannot be operated directly from a 3.7 V or 5 V cell without an additional boost converter, and operation must remain within the specified 18 V maximum supply.
Can TPA3007D1PW drive an 8 ohm speaker?
Yes, the TPA3007D1PW is intended to drive an 8 Ω speaker and is rated for 6.5 W output. The bridge-tied-load topology develops differential voltage across the speaker and removes the need for a series speaker-coupling capacitor. Texas Instruments recommends a ferrite-bead output filter when additional suppression of electromagnetic interference is required.
Where can I download the TPA3007D1PW datasheet PDF?
The TPA3007D1PW datasheet and technical documents are available from the official Texas Instruments TPA3007D1 product page. Use the manufacturer's ordering and support page to access the device documentation for the PW package. The same page also provides the -40 °C to 85 °C operating range, 6.5 W output rating, 8 V to 18 V supply range, and 24-pin package information.
Where is the TPA3007D1PW pinout?
The TPA3007D1PW pinout is shown in the pin-configuration section of the manufacturer datasheet for the 24-pin TSSOP (PW) package. Use that diagram and the associated pin-description table when assigning PCB tracks, supply connections, analog inputs, shutdown control, ground returns, and differential speaker outputs. The product-detail page confirms that the PW ordering option has 24 pins.
Does TPA3007D1PW need an output filter?
The TPA3007D1PW is described as a filter-free Class-D amplifier, but electromagnetic-interference filtering may still be required in the final layout. Texas Instruments notes that an 8 Ω speaker can be driven with a ferrite-bead filter to reduce EMI. Place the selected ferrite components close to the amplifier outputs and validate radiated and conducted emissions in the finished enclosure.
Is TPA3007D1PW suitable for portable audio products?
The TPA3007D1PW is suitable for portable and compact audio products when the system can provide 8 V to 18 V. Its 6.5 W Class-D output and 24-pin TSSOP package support space-constrained designs, while the bridge-tied-load output avoids a speaker-coupling capacitor. A boost converter is required for single-cell lithium operation, and thermal rise must be checked with the speaker and enclosure installed.
When should I choose TPA3007D1PW over a lower-voltage Class-D amplifier?
Choose TPA3007D1PW when the power source already provides 8 V to 18 V and the design needs a 6.5 W mono output. A lower-voltage Class-D device is usually preferable for a single-cell battery because it can operate from a lower rail without a boost stage. The decision should compare total converter loss, output power, thermal margin, speaker impedance, and enclosure volume.
What is the difference between TPA3007D1PW and TPA3007D1PWR?
TPA3007D1PW and TPA3007D1PWR belong to the same Texas Instruments TPA3007D1 device family and use the 24-pin TSSOP package. Their ordering suffixes identify different shipment or ordering configurations rather than different amplifier functions. For a literal board-for-board replacement, confirm the suffix, temperature marking, packing form, pin orientation, and exposed-pad requirements in the manufacturer documentation before substitution.
What can replace TPA3007D1PW on an existing PCB?
The closest documented drop-in choices are Texas Instruments TPA3007D1PWR, TPA3007D1PWG4, and TPA3007D1PWRG4, each identified as a 24-pin TSSOP version of the TPA3007D1 family. Confirm the exact suffix markings and exposed-pad arrangement before fitting. Broader Class-D amplifiers such as the MAX9744 may have different supply or package requirements and are not automatically direct replacements.
Is the MAX9744 a drop-in replacement for TPA3007D1PW?
No. The MAX9744 is not an automatic drop-in replacement for the TPA3007D1PW. The manufacturer information identifies the TPA3007D1PW as an 8 V to 18 V, 24-pin TSSOP device, while comparison information gives the MAX9744 a different 4.5 V to 14 V supply range. Supply limits, package footprint, pin assignment, gain setting, and output filtering must all be verified before considering a board revision.
TPA3007D1PW vs TPA3110D2 — which is better for portable audio?
TPA3007D1PW is the simpler match when the design already has an 8 V to 18 V rail and needs a 6.5 W mono Class-D amplifier. The TPA3110D2 offers a different feature set and power capability, but it should not be treated as pin-compatible without comparing its package, pinout, supply requirements, EMI filtering, and control interface. Use the manufacturer data for both devices before selecting a footprint change.
Where can I buy TPA3007D1PW and check its price?
Use the Request a Quote form on this page to request current TPA3007D1PW pricing, stock, minimum order quantity, and lead time. The XAIPART team can confirm the exact Texas Instruments ordering suffix, delivery format, and quantity needed for your production schedule. Requesting a written quotation also avoids relying on a stale historical price.
How long is the lead time for TPA3007D1PW?
The current lead time for TPA3007D1PW should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, shipment format, and inventory movement, so a quantity-specific quotation is more useful than a generic availability statement. Include your production schedule and required packing method when submitting the request.
Is TPA3007D1PW currently in stock?
Current TPA3007D1PW stock status should be requested through the Request a Quote form on this page. Provide the required quantity and shipment format so the distributor can confirm allocation and expected dispatch timing. Do not infer production availability from a catalog listing; confirm the exact suffix, including the PW packing code, with the quotation.

بيانات مرجعية هندسية لـ TPA3007D1PW — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose TPA3007D1PW for a compact mono audio design that already has an 8 V to 18 V rail and requires 6.5 W into an 8 Ω speaker. Its bridge-tied-load Class-D output avoids a speaker-coupling capacitor, while the 24-pin TSSOP package supports space-constrained products. TPA3007D1PWR, TPA3007D1PWG4, and TPA3007D1PWRG4 are the closest documented ordering alternatives and retain the same cited electrical ratings and package, but final substitution requires checking the suffix markings and exposed-pad requirements. Do not choose a MAX9744 or TPA3110D2 as an automatic drop-in replacement: the cited MAX9744 comparison shows a different supply range, while the TPA3110D2 requires separate verification of package, pinout, power, and control features. For single-cell battery products, a lower-voltage Class-D amplifier may remove the need for a boost stage and produce a simpler, more efficient system.

المقارنة مع البدائل

المعامل هذا المنتج TPA3007D1PWR TPA3007D1PWG4 TPA3007D1PWRG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 24-pin TSSOP (PW) 24-pin TSSOP (PW) 24-pin TSSOP (PW) 24-pin TSSOP (PW)
Output Power 6.5 W 6.5 W 6.5 W 6.5 W
Supply Voltage Range 8 V to 18 V 8 V to 18 V 8 V to 18 V 8 V to 18 V
Channel Configuration Mono Mono Mono Mono
Amplifier Class Class D Class D Class D Class D
Input Type Analog input Analog input Analog input Analog input
Gain 36 dB 36 dB 36 dB 36 dB
Frequency 20 kHz 20 kHz 20 kHz 20 kHz
Output Architecture Bridge-tied load (BTL) Bridge-tied load (BTL) Bridge-tied load (BTL) Bridge-tied load (BTL)
Operating Temperature Range -40 °C to 85 °C -40 °C to 85 °C -40 °C to 85 °C -40 °C to 85 °C

أبرز الفروقات

  • Matches the documented TPA3007D1 electrical configuration (مقابلTPA3007D1PWR)
  • Preserves the same board footprint and power architecture (مقابلTPA3007D1PWG4)
  • No functional performance penalty in the documented R/G4 ordering option (مقابلTPA3007D1PWRG4)

ملاحظات التصميم

Route the two bridge-tied-load outputs as a compact, closely coupled pair and keep them away from the analog input and precision reference circuitry. Place output ferrite beads at the amplifier side of the speaker connector so unwanted switching harmonics are attenuated before entering long speaker wiring. Provide continuous ground and supply planes under the device, and route high-current return currents directly to the supply-decoupling capacitor rather than through analog signal ground paths.

The 8 V to 18 V supply range is a hard design boundary. Use local decoupling at the power pins and confirm the amplifier start-up and operating current against the selected supply. Do not substitute a lower-voltage rail without recalculating the output voltage swing and power capability. Protect the 18 V maximum from transient overshoot and verify the shutdown behavior during power sequencing.

The 24-pin TSSOP package has limited thermal mass even though Class-D operation reduces continuous dissipation. Estimate worst-case conductor loss and switching loss using the maximum supply, load impedance, output power, and amplifier efficiency. Then verify junction-temperature margin on the intended PCB with the enclosure installed. Use uninterrupted copper beneath and around the exposed package area, but follow the manufacturer land-pattern requirements for that PW option.

Class-D output edges can create radiated emissions even when the amplifier is described as filter-free. Evaluate the complete speaker, cable, power supply, and enclosure because changing any one of them can alter EMI performance. Start with short, symmetric output routing and add ferrite-bead filtering when measurements show it is necessary. Conduct both radiated and conducted emissions testing before releasing the product.

Do not assume that a speaker with a nominal 8 Ω rating presents a constant 8 Ω load. Voice-coil impedance varies with frequency and may dip below its rated value, increasing current and risk of distortion or protection action. Verify the transducer specification, maintain speaker wiring polarity, and test with the intended amplifier-to-speaker cable. Also avoid grounding only one side of the bridge-tied output, because both output terminals carry switching activity.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Compliance details were not stated in the cited manufacturer product-page, product-detail, or distributor excerpts. The TPA3007D1PWG4 ordering designation is present in the alternative-part information, but it is not treated as sufficient evidence for a product-wide RoHS or halogen-free declaration.

عمليات بحث ذات صلة

TPA3007D1PW datasheet TPA3007D1PW datasheet pdf TPA3007D1PW pinout TPA3007D1PW specifications TPA3007D1PW replacement TPA3007D1PW equivalent TPA3007D1PW drop-in replacement TPA3007D1PW price TPA3007D1PW stock Texas Instruments TPA3007D1PW TPA3007D1 24-TSSOP amplifier TPA3007D1 6.5W mono amplifier TPA3007D1PW portable speaker application TPA3007D1PW vs MAX9744 TPA3007D1PW vs TPA3110D2

المكونات والمصطلحات ذات الصلة

Texas Instruments TPA3007D1PW TPA3007D1PWR TPA3007D1PWG4 TPA3007D1PWRG4 MAX9744 TPA3110D2 Class-D amplifier mono audio amplifier audio power amplifier bridge-tied load BTL output analog input 8 ohm speaker TSSOP-24 PW package surface-mount package 6.5 W output power 8 V to 18 V supply 36 dB gain 20 kHz bandwidth ferrite-bead filter electromagnetic interference PCM1792ADBR PCM3060PWR
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر