XA7A50T-2CSG324I - 210-I/O Automotive Artix-7 FPGA | AMD
MPN: XA7A50T-2CSG324I ✓ نشطXA7A50T-2CSG324I نظرة عامة
A field-programmable gate array is a programmable-logic semiconductor in which digital functions are configured through a programmable bitstream rather than fixed mask design. Within the product hierarchy, the XA7A50T belongs to the Artix-7 XA FPGA family and combines a high-volume FPGA architecture with automotive qualification. Its 210-I/O interface provides substantial connectivity for external memories, communication controllers, sensors, actuators, and general-purpose digital control.
The primary distinguishing features of the XA7A50T-2CSG324I are its 210 available I/O positions, -2 performance grade, and 324-LFBGA package. The large ball-grid interface supports dense board routing while keeping the component compact for industrial and vehicle electronic modules. The automotive XA positioning adds qualification-oriented reliability requirements, making the device more appropriate for sustained automotive use than the commercial XC7A50T family.
Architecturally, an FPGA fabric contains programmable logic blocks, programmable input/output resources, and memory structures connected by an internal routing network. Design engineers configure these resources to implement control logic, protocol bridges, data acquisition paths, or general parallel processing. Because configuration logic determines the implemented circuit, the same physical FPGA can support multiple firmware or bitstream configurations across a product family, subject to the device's documented resources and constraints.
Typical uses include automotive body and chassis electronics, industrial controllers, sensor aggregation modules, industrial communication gateways, and compact embedded control platforms. The 210-I/O count is particularly useful when a design must connect several peripheral buses, high-speed parallel interfaces, or discrete input and output groups without moving to a larger package. The automotive qualification also makes this part a natural candidate for vehicle electronics requiring a documented reliability basis.
PCB implementation requires careful power planning, decoupling, signal integrity, and exposed-pad heat removal where applicable. Designers should use the AMD package pinout files and UG475 package information to assign balls, confirm voltage domains, and plan high-speed routing. The power architecture should provide the required rails with local bulk and high-frequency decoupling close to the device.
This product page combines exact ordering information, package and I/O details, automotive qualification context, replacement analysis, comparison parameters, and practical implementation guidance. It also distinguishes true same-footprint alternatives from broader Artix-7 devices that may require different packages or qualification, helping engineers narrow replacement choices without confusing functional similarity with drop-in compatibility.
بدائل مباشرة لـ XA7A50T-2CSG324I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع XA7A50T-2CSG324I (نفس عامل الشكل والبصمة) — يختلف في Package, Mounting Type, Speed Grade, Block RAM, Device Type.
XA7A50T-1CSG324I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XA7A50T-1CSG324Q
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XA7A50T-2CSG324Q
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
XC7A50T-2CSG324I
✅ بديل مباشر✗ غير متوفر
$25.4545 / وحدة
عرض ورقة البيانات ←XC7A50T-1CSG324C
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
XA7A50T-2CSG324I الحدود القصوى والخصائص الكهربائية
| Device Type | Artix-7 XA Field-Programmable Gate Array |
| Manufacturer | AMD |
| Ordering Code | XA7A50T-2CSG324I |
| User I/O Count | 210 I/O |
| Speed Grade | -2 |
| العلبة | 324-LFBGA CSPBGA |
| Total Package Balls | 324 balls |
| Automotive Qualification | AEC-Q100 qualified |
| نوع التركيب | Surface Mount |
دليل تكوين أطراف XA7A50T-2CSG324I 324 balls
تكوين الأطراف لـ XA7A50T-2CSG324I (حزمة 324 balls). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XA7A50T-2CSG324I.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
XA7A50T-2CSG324I مناسب لـ 6 التطبيقs: Automotive Body Control, Industrial Sensor Aggregation, Automotive Communication Gateway, Industrial Communication Gateway, Data Acquisition and Control, Compact Embedded Control Platform.
Automotive Body Control
The XA7A50T-2CSG324I fits automotive body-control modules that combine numerous discrete inputs with actuator and communication interfaces. Its 210 user I/O provides ample board-level connectivity, while the -2 grade supports designs requiring a higher performance class than -1 devices. The Artix-7 XA family and documented AEC-Q100 qualification provide an automotive-oriented basis for the FPGA. Place the device between qualified input conditioning and protected output-driver networks, and use the AMD CSG324 package files to assign power, configuration, and I/O balls. System validation must still cover in-vehicle temperature, transient immunity, EMC behavior, startup, and functional-safety requirements.
موصى به
Industrial Sensor Aggregation
The XA7A50T-2CSG324I is appropriate for industrial controllers that must collect signals from numerous sensors and convert them into a processed data stream. Its 210 user I/O can support parallel digital inputs, counters, communication transceivers, and control outputs without requiring a large pin-count package. The programmable fabric allows signal filtering, protocol conversion, diagnostics, and data packing to be consolidated in one device. For a robust implementation, group related I/O by voltage domain, place decoupling near supply balls, and route high-speed interfaces over continuous reference planes. Timing closure should be performed with the -2 device model, while environmental and EMC requirements should be validated at the enclosure and system levels.
موصى به
Automotive Communication Gateway
A programmable communication gateway can use the XA7A50T-2CSG324I to bridge or monitor multiple vehicle-network interfaces while performing local protocol handling. The 210-I/O capacity leaves room for network transceivers, diagnostic channels, status indicators, and supervisory inputs around the central FPGA. Its -2 performance class is useful when packet buffering, parallel conversion, or timing-sensitive control must meet a defined margin. Engineers should establish the power budget for transceiver and FPGA rails independently, include proper isolation in the board stack-up, and maintain uninterrupted return paths under the associated signal-integrity rules. The final interface implementation must be checked against the selected transceiver and vehicle-network requirements.
موصى به
Industrial Communication Gateway
The XA7A50T-2CSG324I is well suited to industrial gateways that translate between parallel digital I/O, serial links, and fieldbus-oriented equipment. A programmable Artix-7 device can implement framing, protocol conversion, timestamping, filtering, and local fault handling while the 210 user I/O provides connectivity for status and control signals. The same CSG324 footprint simplifies board-variant planning, although speed, temperature, and qualification grades must be frozen before release. For implementation, separate sensitive inputs from high-current outputs, use controlled impedance for high-speed links, and provide local decoupling at every required supply domain. Confirm the final timing and EMC performance with the production configuration and worst-case operating conditions.
موصى به
Data Acquisition and Control
The XA7A50T-2CSG324I can serve as the central programmable element in a parallel data-acquisition and control subsystem. Its 210 user I/O supports multiple acquisition channels, control outputs, counters, and status signals, while the programmable fabric can implement acquisition sequencing, filtering, and protocol formatting. The -2 speed grade provides a defined performance alternative when compared with -1 devices, making it useful for timing-sensitive data paths. Designers should assign unused I/O consistently, use the AMD package files for dedicated balls, and isolate analog front ends from the digital fabric. Power-integrity studies should verify that acquisition, digital, and auxiliary rails remain within their permitted limits during simultaneous switching and startup.
موصى به
Compact Embedded Control Platform
The XA7A50T-2CSG324I provides a compact logic platform for embedded controllers that need substantial I/O without a large processor-based module. Its programmable architecture can combine sequencing, local diagnostics, communication, and real-time control, while 210 user I/O connects sensors, relays, displays, and external logic. The CSG324 surface-mount package supports dense multilayer boards but demands careful escape routing and thermal design. Use the manufacturer ball-assignment data to construct the footprint, maintain recommended power and ground connectivity, and reserve configuration resources for reliable startup. After implementation, verify the full bitstream, boundary behavior, clock tolerance, and board-level power sequencing across every supported operating mode.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ XA7A50T-2CSG324I — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | XA7A50T-1CSG324I | XA7A50T-1CSG324Q | XA7A50T-2CSG324Q | XC7A50T-2CSG324I | XC7A50T-1CSG324C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-LFBGA CSPBGA | 324-LFBGA CSPBGA | 324-LFBGA CSPBGA | 324-LFBGA CSPBGA | 324-LFBGA CSPBGA | 324-LFBGA CSPBGA |
| Device Family | Artix-7 XA | Artix-7 XA | Artix-7 XA | Artix-7 XA | Artix-7 XC | Artix-7 XC |
| Speed Grade | -2 | -1 | -1 | -2 | -2 | -1 |
| User I/O Count | 210 I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100-qualified XA family | AEC-Q100-qualified XA family | AEC-Q100-qualified XA family | Commercial XC family | Commercial XC family |
| Temperature Grade Suffix | I | I | Q | Q | I | C |
أبرز الفروقات
- Maintains the -2 speed grade while changing the temperature suffix (مقابلXA7A50T-2CSG324Q)
- Combines the CSG324 footprint with automotive-oriented XA positioning (مقابلXC7A50T-2CSG324I)
- Retains 210 user I/O in the same package family (مقابلXA7A50T-1CSG324I)
ملاحظات التصميم
Construct the CSG324 footprint from the AMD package pinout files rather than inferring ball assignments from the ordering code. Separate power, ground, configuration, clock, and user-I/O assignments exactly as listed for the 324-LFBGA package. Keep high-speed routes on continuous reference planes, minimize stub effects, and follow the manufacturer layer and via guidance. Recheck every alternative against the same package file because shared package names do not guarantee equivalent reserved or dedicated balls.
Plan each FPGA voltage rail independently and place the required bulk and high-frequency decoupling capacitors close to the associated package balls. Include adequate high-frequency return paths for each supply and ground network, and account for startup sequencing and configuration-current behavior. Before schematic release, calculate the worst-case rail current, voltage tolerance, and total board power budget using the AMD electrical characteristics for the exact -2 device.
A 324-LFBGA package can concentrate heat around the device and dense power balls. Use the manufacturer thermal data for the actual PCB stack-up and copper area, then verify operation at the maximum expected ambient temperature and worst-case logic activity. Avoid assuming that a dense power grid alone guarantees acceptable junction temperature. Include thermal validation at system level because enclosure airflow, neighboring components, and transient workloads can materially change results.
Do not treat a shared CSG324 footprint as sufficient evidence of a drop-in replacement. The -1 and -2 speed grades can change timing closure, while I, Q, and C suffixes indicate different temperature or product positions, and XC versus XA indicates a different qualification family. Generate the timing report with the exact candidate, confirm configuration and power settings, and obtain any required automotive qualification approval before changing the released MPN.
معلومات الامتثال
The XA7A50T-2CSG324I is identified as an automotive-grade, AEC-Q100-qualified device. Other environmental and material compliance statuses require confirmation from the current AMD product documentation or declaration.