XA7A50T-2CSG324I - 210-I/O Automotive Artix-7 FPGA | AMD
MPN: XA7A50T-2CSG324I ✓ פעילXA7A50T-2CSG324I סקירה
A field-programmable gate array is a programmable-logic semiconductor in which digital functions are configured through a programmable bitstream rather than fixed mask design. Within the product hierarchy, the XA7A50T belongs to the Artix-7 XA FPGA family and combines a high-volume FPGA architecture with automotive qualification. Its 210-I/O interface provides substantial connectivity for external memories, communication controllers, sensors, actuators, and general-purpose digital control.
The primary distinguishing features of the XA7A50T-2CSG324I are its 210 available I/O positions, -2 performance grade, and 324-LFBGA package. The large ball-grid interface supports dense board routing while keeping the component compact for industrial and vehicle electronic modules. The automotive XA positioning adds qualification-oriented reliability requirements, making the device more appropriate for sustained automotive use than the commercial XC7A50T family.
Architecturally, an FPGA fabric contains programmable logic blocks, programmable input/output resources, and memory structures connected by an internal routing network. Design engineers configure these resources to implement control logic, protocol bridges, data acquisition paths, or general parallel processing. Because configuration logic determines the implemented circuit, the same physical FPGA can support multiple firmware or bitstream configurations across a product family, subject to the device's documented resources and constraints.
Typical uses include automotive body and chassis electronics, industrial controllers, sensor aggregation modules, industrial communication gateways, and compact embedded control platforms. The 210-I/O count is particularly useful when a design must connect several peripheral buses, high-speed parallel interfaces, or discrete input and output groups without moving to a larger package. The automotive qualification also makes this part a natural candidate for vehicle electronics requiring a documented reliability basis.
PCB implementation requires careful power planning, decoupling, signal integrity, and exposed-pad heat removal where applicable. Designers should use the AMD package pinout files and UG475 package information to assign balls, confirm voltage domains, and plan high-speed routing. The power architecture should provide the required rails with local bulk and high-frequency decoupling close to the device.
This product page combines exact ordering information, package and I/O details, automotive qualification context, replacement analysis, comparison parameters, and practical implementation guidance. It also distinguishes true same-footprint alternatives from broader Artix-7 devices that may require different packages or qualification, helping engineers narrow replacement choices without confusing functional similarity with drop-in compatibility.
חלופות תחליף ישיר עבור XA7A50T-2CSG324I — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XA7A50T-2CSG324I (אותו גורם צורה וטביעת רגל) — שונים ב Package, Mounting Type, Speed Grade, Block RAM, Device Type.
XA7A50T-1CSG324I
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XA7A50T-1CSG324Q
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XA7A50T-2CSG324Q
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XC7A50T-2CSG324I
✅ Drop-In✗ אזל מהמלאי
$25.4545 / יחידה
הצג גיליון נתונים ←XC7A50T-1CSG324C
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
XA7A50T-2CSG324I דירוגים מרביים ומאפיינים חשמליים
| Device Type | Artix-7 XA Field-Programmable Gate Array |
| Manufacturer | AMD |
| Ordering Code | XA7A50T-2CSG324I |
| User I/O Count | 210 I/O |
| Speed Grade | -2 |
| מארז | 324-LFBGA CSPBGA |
| Total Package Balls | 324 balls |
| Automotive Qualification | AEC-Q100 qualified |
| סוג הרכבה | Surface Mount |
מדריך תצורת פינים של XA7A50T-2CSG324I 324 balls
תצורת פינים עבור XA7A50T-2CSG324I (מארזת 324 balls). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XA7A50T-2CSG324I.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XA7A50T-2CSG324I מתאים עבור 6 יישוםs: Automotive Body Control, Industrial Sensor Aggregation, Automotive Communication Gateway, Industrial Communication Gateway, Data Acquisition and Control, Compact Embedded Control Platform.
Automotive Body Control
The XA7A50T-2CSG324I fits automotive body-control modules that combine numerous discrete inputs with actuator and communication interfaces. Its 210 user I/O provides ample board-level connectivity, while the -2 grade supports designs requiring a higher performance class than -1 devices. The Artix-7 XA family and documented AEC-Q100 qualification provide an automotive-oriented basis for the FPGA. Place the device between qualified input conditioning and protected output-driver networks, and use the AMD CSG324 package files to assign power, configuration, and I/O balls. System validation must still cover in-vehicle temperature, transient immunity, EMC behavior, startup, and functional-safety requirements.
מומלץ
Industrial Sensor Aggregation
The XA7A50T-2CSG324I is appropriate for industrial controllers that must collect signals from numerous sensors and convert them into a processed data stream. Its 210 user I/O can support parallel digital inputs, counters, communication transceivers, and control outputs without requiring a large pin-count package. The programmable fabric allows signal filtering, protocol conversion, diagnostics, and data packing to be consolidated in one device. For a robust implementation, group related I/O by voltage domain, place decoupling near supply balls, and route high-speed interfaces over continuous reference planes. Timing closure should be performed with the -2 device model, while environmental and EMC requirements should be validated at the enclosure and system levels.
מומלץ
Automotive Communication Gateway
A programmable communication gateway can use the XA7A50T-2CSG324I to bridge or monitor multiple vehicle-network interfaces while performing local protocol handling. The 210-I/O capacity leaves room for network transceivers, diagnostic channels, status indicators, and supervisory inputs around the central FPGA. Its -2 performance class is useful when packet buffering, parallel conversion, or timing-sensitive control must meet a defined margin. Engineers should establish the power budget for transceiver and FPGA rails independently, include proper isolation in the board stack-up, and maintain uninterrupted return paths under the associated signal-integrity rules. The final interface implementation must be checked against the selected transceiver and vehicle-network requirements.
מומלץ
Industrial Communication Gateway
The XA7A50T-2CSG324I is well suited to industrial gateways that translate between parallel digital I/O, serial links, and fieldbus-oriented equipment. A programmable Artix-7 device can implement framing, protocol conversion, timestamping, filtering, and local fault handling while the 210 user I/O provides connectivity for status and control signals. The same CSG324 footprint simplifies board-variant planning, although speed, temperature, and qualification grades must be frozen before release. For implementation, separate sensitive inputs from high-current outputs, use controlled impedance for high-speed links, and provide local decoupling at every required supply domain. Confirm the final timing and EMC performance with the production configuration and worst-case operating conditions.
מומלץ
Data Acquisition and Control
The XA7A50T-2CSG324I can serve as the central programmable element in a parallel data-acquisition and control subsystem. Its 210 user I/O supports multiple acquisition channels, control outputs, counters, and status signals, while the programmable fabric can implement acquisition sequencing, filtering, and protocol formatting. The -2 speed grade provides a defined performance alternative when compared with -1 devices, making it useful for timing-sensitive data paths. Designers should assign unused I/O consistently, use the AMD package files for dedicated balls, and isolate analog front ends from the digital fabric. Power-integrity studies should verify that acquisition, digital, and auxiliary rails remain within their permitted limits during simultaneous switching and startup.
מומלץ
Compact Embedded Control Platform
The XA7A50T-2CSG324I provides a compact logic platform for embedded controllers that need substantial I/O without a large processor-based module. Its programmable architecture can combine sequencing, local diagnostics, communication, and real-time control, while 210 user I/O connects sensors, relays, displays, and external logic. The CSG324 surface-mount package supports dense multilayer boards but demands careful escape routing and thermal design. Use the manufacturer ball-assignment data to construct the footprint, maintain recommended power and ground connectivity, and reserve configuration resources for reliable startup. After implementation, verify the full bitstream, boundary behavior, clock tolerance, and board-level power sequencing across every supported operating mode.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XA7A50T-2CSG324I — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XA7A50T-1CSG324I | XA7A50T-1CSG324Q | XA7A50T-2CSG324Q | XC7A50T-2CSG324I | XC7A50T-1CSG324C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-LFBGA CSPBGA | 324-LFBGA CSPBGA | 324-LFBGA CSPBGA | 324-LFBGA CSPBGA | 324-LFBGA CSPBGA | 324-LFBGA CSPBGA |
| Device Family | Artix-7 XA | Artix-7 XA | Artix-7 XA | Artix-7 XA | Artix-7 XC | Artix-7 XC |
| Speed Grade | -2 | -1 | -1 | -2 | -2 | -1 |
| User I/O Count | 210 I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O | 210 I/O |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100-qualified XA family | AEC-Q100-qualified XA family | AEC-Q100-qualified XA family | Commercial XC family | Commercial XC family |
| Temperature Grade Suffix | I | I | Q | Q | I | C |
מבדילים עיקריים
- Maintains the -2 speed grade while changing the temperature suffix (לעומתXA7A50T-2CSG324Q)
- Combines the CSG324 footprint with automotive-oriented XA positioning (לעומתXC7A50T-2CSG324I)
- Retains 210 user I/O in the same package family (לעומתXA7A50T-1CSG324I)
הערות תכנון
Construct the CSG324 footprint from the AMD package pinout files rather than inferring ball assignments from the ordering code. Separate power, ground, configuration, clock, and user-I/O assignments exactly as listed for the 324-LFBGA package. Keep high-speed routes on continuous reference planes, minimize stub effects, and follow the manufacturer layer and via guidance. Recheck every alternative against the same package file because shared package names do not guarantee equivalent reserved or dedicated balls.
Plan each FPGA voltage rail independently and place the required bulk and high-frequency decoupling capacitors close to the associated package balls. Include adequate high-frequency return paths for each supply and ground network, and account for startup sequencing and configuration-current behavior. Before schematic release, calculate the worst-case rail current, voltage tolerance, and total board power budget using the AMD electrical characteristics for the exact -2 device.
A 324-LFBGA package can concentrate heat around the device and dense power balls. Use the manufacturer thermal data for the actual PCB stack-up and copper area, then verify operation at the maximum expected ambient temperature and worst-case logic activity. Avoid assuming that a dense power grid alone guarantees acceptable junction temperature. Include thermal validation at system level because enclosure airflow, neighboring components, and transient workloads can materially change results.
Do not treat a shared CSG324 footprint as sufficient evidence of a drop-in replacement. The -1 and -2 speed grades can change timing closure, while I, Q, and C suffixes indicate different temperature or product positions, and XC versus XA indicates a different qualification family. Generate the timing report with the exact candidate, confirm configuration and power settings, and obtain any required automotive qualification approval before changing the released MPN.
מידע על תאימות
The XA7A50T-2CSG324I is identified as an automotive-grade, AEC-Q100-qualified device. Other environmental and material compliance statuses require confirmation from the current AMD product documentation or declaration.