Infineon

XMC4400F100F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon

MPN: XMC4400F100F512ABXQMA1 ✓ نشط
PG-LQFP-100-11 Package 120 MHz Speed 512 KB Memory
الحد الأدنى للطلب: 1 |

XMC4400F100F512ABXQMA1 نظرة عامة

Infineon Technologies XMC4400F100F512ABXQMA1 is a 32-bit industrial Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory and a 100-pin PG-LQFP package. It belongs to the XMC4000 family and integrates a 10/100 Ethernet MAC for industrial communication designs.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. In the system hierarchy, the XMC4400 is an MCU, a more specific form of embedded processor and semiconductor. Unlike a general-purpose desktop CPU, an MCU is designed around deterministic control, communication, and real-time system tasks, with its peripherals and memory optimized for embedded products.

The device's principal characteristics include an Arm Cortex-M4 processor core, 120 MHz operating frequency, 32-bit architecture, and 512 KB of flash. Infineon identifies the XMC4400-F100F512-BA as an industrial 32-bit microcontroller with a 10/100 Ethernet MAC. The PG-LQFP-100-11 package provides 100 externally accessible connections for digital control, communications, clocking, power, debug, and analog-interface requirements.

The Cortex-M4 architecture uses the Arm Thumb instruction set and supports efficient interrupt-driven control software. Its floating-point capability makes it suitable for applications that combine digital control with numerical processing. The integrated Ethernet MAC supports connected industrial equipment, although the complete electrical design still requires the external magnetics, clocking, protection, and connector implementation described by Infineon.

Typical uses include industrial Ethernet controllers, factory automation equipment, motor-control systems, building automation interfaces, connected measurement instruments, and embedded network gateways. The 120 MHz processing rate provides useful headroom for communication stacks, supervisory control, diagnostics, and real-time control tasks when the software architecture and interrupt latency are designed together.

PCB planning should begin with the manufacturer's pin-description table and reference design because the 100-pin package contains dedicated power, ground, debug, Ethernet, analog, and digital functions. Pay particular attention to ground distribution, decoupling, clock source selection, Ethernet magnetics placement, and programming or debug access before finalizing the board layout.

This product record combines the manufacturer ordering information, package and memory details, Ethernet function description, and source links needed for engineering review. It also organizes replacement considerations and design guidance so engineers can assess fit, firmware impact, and layout compatibility before committing a new design.

بدائل مباشرة لـ XMC4400F100F512ABXQMA1 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع XMC4400F100F512ABXQMA1 (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type, Flash Organization, Flash Memory, Architecture.

Infineon
Package: 100-LQFP with exposed pad
Product Type: 32-bit industrial ARM Cortex-M4 microcontroller
Flash Organization: 512K x 8
قارن مع XMC4400F100F512ABXQMA1 →
Infineon
Package: PG-LQFP-100
Flash Memory: 512 KB (512K x 8)
Architecture: 32-bit
قارن مع XMC4400F100F512ABXQMA1 →
Infineon
Package: PG-LQFP-100
Product Type: 32-bit Arm Cortex-M4 microcontroller
Flash Organization: 512K x 8 bit
قارن مع XMC4400F100F512ABXQMA1 →
Infineon
Product Type: 32-bit industrial ARM Cortex-M4 microcontroller
Architecture: 32-bit
قارن مع XMC4400F100F512ABXQMA1 →
Infineon
Package: PG-LQFP-100-11 (100-pin LQFP)
قارن مع XMC4400F100F512ABXQMA1 →

XMC4400F100F512BAXQMA1

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Infineon
📦 PG-LQFP-100-11
32-bit industrial ARM Cortex-M4 microcontroller · ARM Cortex-M4 · 120 MHz · 512 KB · 512K x 8 · 32 bit/16 bit · 10/100 Ethernet MAC · 12 bit

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XMC4400F100F512BAXUMA1

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Infineon
📦 PG-LQFP-100-11
32-bit industrial microcontroller · ARM Cortex-M4 · 32-bit · 120 MHz · 512 KB (512K x 8) · 10/100 Ethernet MAC · XMC4000 · PG-LQFP-100

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XMC4400F100K512BAXQMA1

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Infineon
📦 PG-LQFP-100-11
32-bit Arm Cortex-M4 microcontroller · XMC4000 · Arm Cortex-M4 · 32 bit · 120 MHz · 512 kB · 512K x 8 bit · 3.3 V

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XMC4400F100K512BAXUMA1

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Infineon
📦 PG-LQFP-100-11
32-bit industrial ARM Cortex-M4 microcontroller · ARM Cortex-M4 · 120 MHz · 32-bit · 512 KB · 512K x 8 · 10/100 Ethernet · PG-LQFP-100-11

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XMC4500F100K1024ACXQSA1

✅ بديل مباشر
Infineon
📦 PG-LQFP-100
ARM Cortex-M4 with FPU · 120 MHz · 32-bit · 1024 KB (1M x 8) · 160 KB · PG-LQFP-100-11 (100-pin LQFP) · Surface Mount · 3.0 V to 3.6 V

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XMC4400F100F512ABXQMA1 الحدود القصوى والخصائص الكهربائية

Product Type 32-bit industrial microcontroller
Processor Core Arm Cortex-M4
Architecture 32-bit RISC
Maximum CPU Frequency 120 MHz
Flash Memory 512 KB
Flash Organization 512K x 8 bits
Ethernet MAC 10/100 Ethernet MAC
العلبة PG-LQFP-100-11
عدد الأطراف 100 pins
نوع التركيب Surface mount
Product Family XMC4000
Product Grade Industrial
Core Count 1 core
Instruction Set Arm Thumb
Ethernet Support 10/100 Ethernet MAC

دليل تكوين أطراف XMC4400F100F512ABXQMA1 pg-lqfp-100-11

تكوين الأطراف لـ XMC4400F100F512ABXQMA1 (حزمة pg-lqfp-100-11). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة pg-lqfp-100-11 لـ XMC4400F100F512ABXQMA1

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XMC4400F100F512ABXQMA1.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

XMC4400F100F512ABXQMA1 مناسب لـ 6 التطبيقs: Industrial Ethernet Controller, Factory Automation Equipment, Motor Control System, Building Automation Gateway, Connected Measurement Instrument, Embedded Network Gateway.

🌐

Industrial Ethernet Controller

The XMC4400F100F512ABXQMA1 fits an industrial Ethernet controller because its 120 MHz Arm Cortex-M4 core can execute protocol processing and supervisory logic while the integrated 10/100 Ethernet MAC handles wired communications. The 512 KB flash provides room for bootloader code, network stacks, diagnostics, and control functions. The 100-pin PG-LQFP-100-11 package also provides more external connections than compact MCUs. Implement the physical network interface according to Infineon's reference layout, including suitable isolation or magnetics, controlled clocking, and protection appropriate to the installation environment.

🏭

Factory Automation Equipment

The XMC4400F100F512ABXQMA1 is suitable for factory automation modules that combine deterministic control with centralized communications. Its 120 MHz Cortex-M4 core can service interrupts, communication tasks, diagnostics, and machine-state logic, while the 10/100 Ethernet MAC supports connection to supervisory systems. The 100-pin LQFP package allows direct attachment of sensors, actuators, encoders, and digital field-bus interfaces. Engineers should partition real-time and non-real-time tasks, validate worst-case interrupt latency, and use the Infineon pin description and common-ground requirements to establish a reliable industrial control board.

🔧

Motor Control System

The XMC4400F100F512ABXQMA1 can serve as the supervisory processor in an industrial motor-control system because the 120 MHz Cortex-M4 core supports fast control-loop execution, fault handling, and communications. The 10/100 Ethernet MAC allows the controller to exchange commands, operating data, and diagnostics with a higher-level controller. Its 100-pin package provides sufficient pin count for digital interfaces and supporting functions. Power-stage timing, analog measurements, protection, and ground separation must be designed independently of the MCU, while software should include deterministic task scheduling and comprehensive fault recovery.

🧩

Building Automation Gateway

The XMC4400F100F512ABXQMA1 is appropriate for a building automation gateway that aggregates sensor information, controls connected equipment, and maintains wired network communication. The 512 KB flash can support a bootloader, protocol handlers, configuration storage, and device management logic, while the Cortex-M4 core leaves processing capacity for local decisions. The 100-pin package offers broader peripheral connectivity than a minimal microcontroller. Design the product for reliable 24-hour operation by including watchdog recovery, brownout handling, secure firmware update procedures, and diagnostics for communications and field-bus errors.

📺

Connected Measurement Instrument

The XMC4400F100F512ABXQMA1 can support connected measurement instruments that combine signal processing, control, data formatting, and Ethernet reporting. Its 120 MHz 32-bit Cortex-M4 core is well suited to interrupt-driven acquisition and real-time calculations, and its 512 KB flash provides capacity for measurement firmware and communication protocols. The 100-pin package makes it practical to connect external converters, reference signals, status indicators, and communications circuitry. Accuracy and noise performance depend on the analog front end and grounding, so keep sensitive analog and digital return paths separated and follow the manufacturer's recommended reference layouts.

🖥️

Embedded Network Gateway

The XMC4400F100F512ABXQMA1 suits an embedded network gateway where a real-time MCU must bridge local interfaces to a 10/100 Ethernet network. Its Cortex-M4 performance supports protocol translation, data filtering, remote diagnostics, and local control, while the integrated Ethernet MAC reduces the need for a separate network controller. With 512 KB flash, the device can hold networking, update, and application layers within a single package. For a production gateway, define update rollback behavior, manage boot settings safely, validate network timing, and isolate external cabling with appropriately rated protection components.

What are the key specifications of XMC4400F100F512ABXQMA1 that engineers should know?
The XMC4400F100F512ABXQMA1 is a 32-bit single-core Arm Cortex-M4 industrial microcontroller with a 120 MHz clock, 512 KB of flash, a 10/100 Ethernet MAC, and a PG-LQFP-100-11 package. According to the Infineon manufacturer datasheet, the XMC4400-F100F512-BA family provides a combination of real-time embedded processing and wired Ethernet connectivity. The 100-pin surface-mount package exposes substantially more interface options than smaller microcontroller packages, making it appropriate for industrial controllers that need both control inputs and communication peripherals.
What is the operating frequency of XMC4400F100F512ABXQMA1?
The XMC4400F100F512ABXQMA1 operates at up to 120 MHz. Infineon identifies the device as an Arm Cortex-M4 microcontroller, and the product ordering designation XMC4400-F100F512-BA denotes the 120 MHz, 512 KB flash member of the XMC4000 family. The 32-bit Cortex-M4 core supports efficient interrupt-driven software and floating-point calculations, allowing the processor time to be shared among Ethernet handling, diagnostics, control loops, and supervisory tasks.
How much flash memory does XMC4400F100F512ABXQMA1 have?
The XMC4400F100F512ABXQMA1 contains 512 KB of flash memory organized as 512K x 8 bits. The manufacturer datasheet defines the F512 part of the ordering code as the 512 KB flash configuration. This storage is intended for boot code, Ethernet stacks, real-time control software, configuration data, and diagnostics. Final firmware capacity must also allow for reserved memory, bootloader requirements, update metadata, and the allocation of data to RAM.
What is XMC4400F100F512ABXQMA1 and what is it used for?
The XMC4400F100F512ABXQMA1 is an industrial 32-bit Arm Cortex-M4 MCU with Ethernet connectivity. According to Infineon, the XMC4400-F100F512-BA is a 120 MHz device with 512 KB flash and a 10/100 Ethernet MAC. It is used when an embedded product needs local real-time control and wired network communication, including factory automation, motor-control equipment, building automation, connected measurement instruments, and industrial communication gateways.
What package does XMC4400F100F512ABXQMA1 use?
The XMC4400F100F512ABXQMA1 uses the PG-LQFP-100-11 surface-mount package with 100 pins. Infineon lists this package designation in the product description, while the manufacturer datasheet provides the complete ordering information and package characteristics. The LQFP footprint offers extensive I/O access but requires careful escape routing between its closely spaced leads. Use the package drawing and land pattern from the Infineon documentation when defining the PCB footprint.
Where can I download the XMC4400F100F512ABXQMA1 datasheet PDF?
The official XMC4400F100F512ABXQMA1 datasheet is available from Infineon at the manufacturer PDF link listed on this page. The document describes the XMC4400 family, ordering designations, available features, electrical characteristics, and physical information. Engineers should also consult the XMC4400 Reference Manual for detailed registers, peripherals, interrupt behavior, and device initialization requirements because those subjects extend beyond the scope of a product datasheet.
Where can I find the XMC4400F100F512ABXQMA1 pinout?
The authoritative pinout is the pin-description table in the Infineon XMC4400 manufacturer datasheet. Use the ordering-specific table for XMC4400-F100F512-BA because derivative-device assignments can differ even within one family. The package is PG-LQFP-100-11, so the board design should be checked against the 100-pin mechanical drawing, exposed ground requirements, and the common-ground concept described by Infineon before assigning tracks.
Does XMC4400F100F512ABXQMA1 support Ethernet?
Yes, the XMC4400F100F512ABXQMA1 includes a 10/100 Ethernet MAC. Infineon describes the XMC4400-F100F512-BA as an industrial microcontroller with 10/100 Ethernet capability, enabling wired network communication alongside its 120 MHz Cortex-M4 processing. A complete Ethernet interface still requires the appropriate external network components and board layout specified by the manufacturer, so the MAC feature alone should not be interpreted as a complete physical network port.
Where can I buy XMC4400F100F512ABXQMA1 online?
Use the Request a Quote form on this page to request XMC4400F100F512ABXQMA1 availability, quantity breaks, and delivery information. The listing identifies the exact PG-LQFP-100-11 device with 120 MHz operation and 512 KB flash, so the quote should preserve the complete ordering code. Confirm the required temperature grade, shipment form, and authorized supply channel when placing the order.
What is the price of XMC4400F100F512ABXQMA1?
Pricing for the XMC4400F100F512ABXQMA1 is handled through the Request a Quote form on this page. Because pricing can change with quantity, market conditions, and shipment form, the request should specify the required order quantity and packaging configuration. The product itself is a 120 MHz, 512 KB-flash Cortex-M4 MCU in a PG-LQFP-100-11 industrial package, and those details should remain unchanged while comparing quotation responses.
What is the lead time for XMC4400F100F512ABXQMA1?
The current lead time for XMC4400F100F512ABXQMA1 should be requested through the Request a Quote form on this page. Lead time depends on order quantity, inventory position, and the shipment form required by the production schedule. The exact technical configuration is XMC4400-F100F512-BA in PG-LQFP-100-11, with a 120 MHz Cortex-M4 core, 512 KB flash, and 10/100 Ethernet MAC.
Is XMC4400F100F512ABXQMA1 in stock?
Use the Request a Quote form on this page to check current stock and allocate quantity for the XMC4400F100F512ABXQMA1. The listing supports direct order fulfillment, but live availability can change quickly and may vary by quantity and shipment form. State the required delivery schedule and packaging needs in the request so the supplier can return a current allocation rather than an unconstrained availability statement.
What is the best drop-in replacement for XMC4400F100F512ABXQMA1?
The closest same-family drop-in candidates are XMC4400-F100F512-BA ordering variants in the PG-LQFP-100-11 family, including XMC4400F100F512BAXQMA1 and XMC4400F100F512BAXUMA1. Their suitability depends on the meaning of the final shipment and qualification codes. Confirm the exact ordering table, temperature grade, flash configuration, Ethernet features, and exposed-ground requirements before substituting any part; a family match alone does not prove software and production equivalence.
Can XMC4400F100K512BAXQMA1 replace XMC4400F100F512ABXQMA1?
XMC4400F100K512BAXQMA1 may share the XMC4400 industrial platform and PG-LQFP-100-11 mechanical format, but it must not be treated as an automatic drop-in replacement. The F and K ordering codes can represent different device configurations, and the exact Infineon ordering table must confirm flash, package, qualification, and shipment-code equivalence. Review the pin-description table and errata documents, then rebuild and validate the firmware if any configuration differs.
When should I choose XMC4400F100F512ABXQMA1 over another Cortex-M4 MCU?
Choose the XMC4400F100F512ABXQMA1 when a design specifically benefits from the XMC4000 platform, its 120 MHz Cortex-M4 performance, 512 KB flash, 10/100 Ethernet MAC, and 100-pin LQFP interface density. It is particularly relevant to industrial Ethernet and real-time control equipment. Select another MCU when its toolchain, peripheral mix, package size, qualification, or software ecosystem better matches the product, since processor frequency alone does not guarantee system suitability.
What is the difference between XMC4400F100F512ABXQMA1 and XMC4500F100K1024ACXQSA1?
The XMC4500F100K1024ACXQSA1 has a 1 MB flash configuration, while the XMC4400F100F512ABXQMA1 has 512 KB. The XMC4500 also belongs to a different Infineon family and carries different ordering qualifiers, so it is not a qualified drop-in substitute for this XMC4400 device. Both are 100-pin LQFP-class industrial Cortex-M4 products, but memory size, peripheral revisions, qualification, firmware support, and pin-level assignments must be compared before redesigning around either device.

بيانات مرجعية هندسية لـ XMC4400F100F512ABXQMA1 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the XMC4400F100F512ABXQMA1 for an industrial embedded design that specifically requires the XMC4000 platform, a 120 MHz Arm Cortex-M4 core, 512 KB flash, and integrated 10/100 Ethernet connectivity. It is particularly suitable for automation, motor-control supervisory logic, measurement equipment, and connected gateways needing the 100-pin LQFP interface density. Prefer XMC4400F100F512BAXQMA1 or XMC4400F100F512BAXUMA1 when the Infineon ordering table confirms that the final shipment code matches production requirements. Consider XMC4400F100K512BAXQMA1 or XMC4400F100K512BAXUMA1 only after resolving the F-versus-K configuration differences. The XMC4500F100K1024ACXQSA1 is appropriate only for a deliberate redesign because its 1 MB flash is twice the target capacity and its family, qualification, and peripheral behavior require fresh validation.

المقارنة مع البدائل

المعامل هذا المنتج XMC4400F100F512BAXQMA1 XMC4400F100F512BAXUMA1 XMC4400F100K512BAXQMA1 XMC4400F100K512BAXUMA1 XMC4500F100K1024ACXQSA1
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package PG-LQFP-100-11 PG-LQFP-100-11 PG-LQFP-100-11 PG-LQFP-100-11 PG-LQFP-100-11 PG-LQFP-100
Processor Core Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4
Maximum CPU Frequency 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Architecture 32-bit 32-bit 32-bit 32-bit 32-bit 32-bit
Product Family XMC4000 XMC4000 XMC4000 XMC4000 XMC4000 XMC4500
Core Count 1 core 1 core 1 core 1 core 1 core 1 core
Industrial Qualification Industrial Industrial Industrial Industrial Industrial Industrial

أبرز الفروقات

  • Exact XMC4400-F100F512-BA core and memory configuration (مقابلXMC4500F100K1024ACXQSA1)
  • Integrated 10/100 Ethernet MAC in the XMC4000 industrial platform (مقابلXMC4300F100K256BAXQMA1)
  • Same 120 MHz Arm Cortex-M4 performance class (مقابلXMC4500F100K1024ACXQSA1)

ملاحظات التصميم

Build the PCB from the Infineon PG-LQFP-100-11 land pattern and pin-description table rather than inferring connections from a generic 100-pin symbol. Preserve the common-ground concept by connecting all designated VSS, VSSA, and VSSO pins to the intended ground plane. Review exposed-pad requirements in the package drawing, place input and output capacitors close to their assigned pins, and keep the 120 MHz clock and Ethernet differential routes away from noisy switching stages.

Treat the Ethernet and clock paths as controlled-impedance signals from the outset. Follow Infineon's Ethernet reference layout for magnetics, termination, and isolation placement, and avoid introducing unnecessary stubs beneath the MCU or network interface. Provide continuous reference planes and a deliberate grounding strategy so that switching currents from motors, relays, or external power converters do not flow through the processor and analog signal-return paths.

Do not treat an ordering-code similarity as proof of interchangeability. The target contains XMC4400-F100F512-BA, while nearby XMC4400 and XMC4500 order codes can differ in flash capacity, qualification, temperature grade, or shipment form. Before substitution, compare the complete Infineon ordering table, pin-description table, electrical characteristics, errata, and reference manual. Firmware should also be retested for register, peripheral, and initialization differences.

Separate clean MCU supplies from analog and high-current loads where the system architecture permits. Place the required decoupling network directly at the relevant supply pins and follow the datasheet's voltage and capacitance requirements. Use a controlled power sequence for Ethernet and external circuitry, and verify brownout behavior during startup, firmware update, load transients, and communication faults. Confirm absolute maximum and recommended operating conditions for the exact ordering variant.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The XMC4400-F100F512-BA is identified as an industrial microcontroller. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for this exact ordering code require confirmation from the manufacturer or shipment documentation.

تم التحقق من البيانات في: 2026-11-11 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

XMC4400F100F512ABXQMA1 datasheet XMC4400F100F512ABXQMA1 pinout XMC4400F100F512ABXQMA1 datasheet pdf XMC4400F100F512ABXQMA1 specifications XMC4400F100F512ABXQMA1 equivalent XMC4400F100F512ABXQMA1 replacement XMC4400F100F512ABXQMA1 price XMC4400F100F512ABXQMA1 stock Infineon XMC4400F100F512ABXQMA1 XMC4400F100F512ABXQMA1 LQFP-100 XMC4400F100F512ABXQMA1 industrial Ethernet XMC4400F100F512ABXQMA1 vs XMC4500F100K1024ACXQSA1 XMC4400F100F512ABXQMA1 Cortex-M4 120MHz XMC4400F100F512ABXQMA1 512KB flash

المكونات والمصطلحات ذات الصلة

Infineon Technologies XMC4400F100F512ABXQMA1 XMC4400-F100F512-BA XMC4400F100F512BAXQMA1 XMC4400F100F512BAXUMA1 XMC4400F100K512BAXQMA1 XMC4400F100K512BAXUMA1 XMC4500F100K1024ACXQSA1 Arm Cortex-M4 Arm Thumb instruction set microcontroller MCU embedded processor semiconductor industrial microcontroller XMC4000 XMC4500 10/100 Ethernet MAC Ethernet 120 MHz 512 KB flash memory PG-LQFP-100-11 LQFP surface-mount package industrial automation factory automation motor control building automation embedded network gateway connected measurement instrument
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر