XMC4400F100F512ABXQMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4400F100F512ABXQMA1 ✓ פעילXMC4400F100F512ABXQMA1 סקירה
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. In the system hierarchy, the XMC4400 is an MCU, a more specific form of embedded processor and semiconductor. Unlike a general-purpose desktop CPU, an MCU is designed around deterministic control, communication, and real-time system tasks, with its peripherals and memory optimized for embedded products.
The device's principal characteristics include an Arm Cortex-M4 processor core, 120 MHz operating frequency, 32-bit architecture, and 512 KB of flash. Infineon identifies the XMC4400-F100F512-BA as an industrial 32-bit microcontroller with a 10/100 Ethernet MAC. The PG-LQFP-100-11 package provides 100 externally accessible connections for digital control, communications, clocking, power, debug, and analog-interface requirements.
The Cortex-M4 architecture uses the Arm Thumb instruction set and supports efficient interrupt-driven control software. Its floating-point capability makes it suitable for applications that combine digital control with numerical processing. The integrated Ethernet MAC supports connected industrial equipment, although the complete electrical design still requires the external magnetics, clocking, protection, and connector implementation described by Infineon.
Typical uses include industrial Ethernet controllers, factory automation equipment, motor-control systems, building automation interfaces, connected measurement instruments, and embedded network gateways. The 120 MHz processing rate provides useful headroom for communication stacks, supervisory control, diagnostics, and real-time control tasks when the software architecture and interrupt latency are designed together.
PCB planning should begin with the manufacturer's pin-description table and reference design because the 100-pin package contains dedicated power, ground, debug, Ethernet, analog, and digital functions. Pay particular attention to ground distribution, decoupling, clock source selection, Ethernet magnetics placement, and programming or debug access before finalizing the board layout.
This product record combines the manufacturer ordering information, package and memory details, Ethernet function description, and source links needed for engineering review. It also organizes replacement considerations and design guidance so engineers can assess fit, firmware impact, and layout compatibility before committing a new design.
חלופות תחליף ישיר עבור XMC4400F100F512ABXQMA1 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XMC4400F100F512ABXQMA1 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Product Type, Flash Organization, Flash Memory, Architecture.
XMC4400F100F512BAXQMA1
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←XMC4400F100F512BAXUMA1
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←XMC4400F100K512BAXQMA1
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←XMC4400F100K512BAXUMA1
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←XMC4500F100K1024ACXQSA1
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XMC4400F100F512ABXQMA1 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| Ethernet MAC | 10/100 Ethernet MAC |
| מארז | PG-LQFP-100-11 |
| מספר פינים | 100 pins |
| סוג הרכבה | Surface mount |
| Product Family | XMC4000 |
| Product Grade | Industrial |
| Core Count | 1 core |
| Instruction Set | Arm Thumb |
| Ethernet Support | 10/100 Ethernet MAC |
מדריך תצורת פינים של XMC4400F100F512ABXQMA1 pg-lqfp-100-11
תצורת פינים עבור XMC4400F100F512ABXQMA1 (מארזת pg-lqfp-100-11). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XMC4400F100F512ABXQMA1.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XMC4400F100F512ABXQMA1 מתאים עבור 6 יישוםs: Industrial Ethernet Controller, Factory Automation Equipment, Motor Control System, Building Automation Gateway, Connected Measurement Instrument, Embedded Network Gateway.
Industrial Ethernet Controller
The XMC4400F100F512ABXQMA1 fits an industrial Ethernet controller because its 120 MHz Arm Cortex-M4 core can execute protocol processing and supervisory logic while the integrated 10/100 Ethernet MAC handles wired communications. The 512 KB flash provides room for bootloader code, network stacks, diagnostics, and control functions. The 100-pin PG-LQFP-100-11 package also provides more external connections than compact MCUs. Implement the physical network interface according to Infineon's reference layout, including suitable isolation or magnetics, controlled clocking, and protection appropriate to the installation environment.
מומלץ
Factory Automation Equipment
The XMC4400F100F512ABXQMA1 is suitable for factory automation modules that combine deterministic control with centralized communications. Its 120 MHz Cortex-M4 core can service interrupts, communication tasks, diagnostics, and machine-state logic, while the 10/100 Ethernet MAC supports connection to supervisory systems. The 100-pin LQFP package allows direct attachment of sensors, actuators, encoders, and digital field-bus interfaces. Engineers should partition real-time and non-real-time tasks, validate worst-case interrupt latency, and use the Infineon pin description and common-ground requirements to establish a reliable industrial control board.
מומלץ
Motor Control System
The XMC4400F100F512ABXQMA1 can serve as the supervisory processor in an industrial motor-control system because the 120 MHz Cortex-M4 core supports fast control-loop execution, fault handling, and communications. The 10/100 Ethernet MAC allows the controller to exchange commands, operating data, and diagnostics with a higher-level controller. Its 100-pin package provides sufficient pin count for digital interfaces and supporting functions. Power-stage timing, analog measurements, protection, and ground separation must be designed independently of the MCU, while software should include deterministic task scheduling and comprehensive fault recovery.
מומלץ
Building Automation Gateway
The XMC4400F100F512ABXQMA1 is appropriate for a building automation gateway that aggregates sensor information, controls connected equipment, and maintains wired network communication. The 512 KB flash can support a bootloader, protocol handlers, configuration storage, and device management logic, while the Cortex-M4 core leaves processing capacity for local decisions. The 100-pin package offers broader peripheral connectivity than a minimal microcontroller. Design the product for reliable 24-hour operation by including watchdog recovery, brownout handling, secure firmware update procedures, and diagnostics for communications and field-bus errors.
מומלץ
Connected Measurement Instrument
The XMC4400F100F512ABXQMA1 can support connected measurement instruments that combine signal processing, control, data formatting, and Ethernet reporting. Its 120 MHz 32-bit Cortex-M4 core is well suited to interrupt-driven acquisition and real-time calculations, and its 512 KB flash provides capacity for measurement firmware and communication protocols. The 100-pin package makes it practical to connect external converters, reference signals, status indicators, and communications circuitry. Accuracy and noise performance depend on the analog front end and grounding, so keep sensitive analog and digital return paths separated and follow the manufacturer's recommended reference layouts.
מומלץ
Embedded Network Gateway
The XMC4400F100F512ABXQMA1 suits an embedded network gateway where a real-time MCU must bridge local interfaces to a 10/100 Ethernet network. Its Cortex-M4 performance supports protocol translation, data filtering, remote diagnostics, and local control, while the integrated Ethernet MAC reduces the need for a separate network controller. With 512 KB flash, the device can hold networking, update, and application layers within a single package. For a production gateway, define update rollback behavior, manage boot settings safely, validate network timing, and isolate external cabling with appropriately rated protection components.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XMC4400F100F512ABXQMA1 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XMC4400F100F512BAXQMA1 | XMC4400F100F512BAXUMA1 | XMC4400F100K512BAXQMA1 | XMC4400F100K512BAXUMA1 | XMC4500F100K1024ACXQSA1 |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100 |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Product Family | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4500 |
| Core Count | 1 core | 1 core | 1 core | 1 core | 1 core | 1 core |
| Industrial Qualification | Industrial | Industrial | Industrial | Industrial | Industrial | Industrial |
מבדילים עיקריים
- Exact XMC4400-F100F512-BA core and memory configuration (לעומתXMC4500F100K1024ACXQSA1)
- Integrated 10/100 Ethernet MAC in the XMC4000 industrial platform (לעומתXMC4300F100K256BAXQMA1)
- Same 120 MHz Arm Cortex-M4 performance class (לעומתXMC4500F100K1024ACXQSA1)
הערות תכנון
Build the PCB from the Infineon PG-LQFP-100-11 land pattern and pin-description table rather than inferring connections from a generic 100-pin symbol. Preserve the common-ground concept by connecting all designated VSS, VSSA, and VSSO pins to the intended ground plane. Review exposed-pad requirements in the package drawing, place input and output capacitors close to their assigned pins, and keep the 120 MHz clock and Ethernet differential routes away from noisy switching stages.
Treat the Ethernet and clock paths as controlled-impedance signals from the outset. Follow Infineon's Ethernet reference layout for magnetics, termination, and isolation placement, and avoid introducing unnecessary stubs beneath the MCU or network interface. Provide continuous reference planes and a deliberate grounding strategy so that switching currents from motors, relays, or external power converters do not flow through the processor and analog signal-return paths.
Do not treat an ordering-code similarity as proof of interchangeability. The target contains XMC4400-F100F512-BA, while nearby XMC4400 and XMC4500 order codes can differ in flash capacity, qualification, temperature grade, or shipment form. Before substitution, compare the complete Infineon ordering table, pin-description table, electrical characteristics, errata, and reference manual. Firmware should also be retested for register, peripheral, and initialization differences.
Separate clean MCU supplies from analog and high-current loads where the system architecture permits. Place the required decoupling network directly at the relevant supply pins and follow the datasheet's voltage and capacitance requirements. Use a controlled power sequence for Ethernet and external circuitry, and verify brownout behavior during startup, firmware update, load transients, and communication faults. Confirm absolute maximum and recommended operating conditions for the exact ordering variant.
מידע על תאימות
The XMC4400-F100F512-BA is identified as an industrial microcontroller. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations for this exact ordering code require confirmation from the manufacturer or shipment documentation.